Led Kled0002e
Led Kled0002e
Led Kled0002e
L E D
LED
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
2 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Lineup Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
Hamamatsu LEDs
Product lineup that covers a wide variety of wavelengths Custom devices available
Type Peak emission wavelength Main applications In addition to package and lens design,
and multi-element array, we can also
Red LED 650 to 700 nm Optical switches, POF data communication, barcode readers support custom specifications, such as
wavelength changes that require new
830 to 945 nm Optical encoders, optical fiber communication, FSO, optical switches epitaxial wafer crystal growth.
Near-infrared LED
1.2 to 1.55 µm Moisture measurement, analysis, near-infrared lighting
SIP type LED 650 to 940 nm Optical links, optical switches, encoders
10
Radiant flux (mW)
Plastic packages
0.1
Applicable
Si photodiode InGaAs PIN photodiode InAsSb photovoltaic detector
photosensors
600 800 1000 2500 4500
Wavelength (nm)
KLEDC0064EB
KLEDC0064EB
Hamamatsu LED Light output vs. wavelength 4 / 19
Optical sensor Encoders Optical communication
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Application examples
Optical sensors Encoders Optical communication
Collimated light LED Red LED
Near-infrared LED
n
missio
Trans
ption
Lighting for infrared cameras Rece
Gas detection
Near-infrared LEDs are used for non-contact product Optical transmission encoders require a collimated LED Red LEDs are used for POF (plastic optical fiber)
passage detection and safety light curtains, etc. to achieve high accuracy. communications and FSO (free space optics).
Mid-infrared LED
KLEDC0056EA KLEDC0057EA KLEDC0058EB
Infrared LEDs with high output are used as light sources for Compact near-infrared LEDs are used for measuring skin Mid-infrared LEDs are used for CO2 density measurements
infrared camera imaging. These LEDs are arranged around the moisture levels. in plant factories.
camera.
5 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Red LEDs Red LEDs have a peak emission wavelength in the 660 to 700 nm range. They are used in a wide range of applications including optical switches, POF data
communication, and barcode readers.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
POF data
L10762 15 ϕ0.4 1.0* 1.9 70 ⑧ High fiber end output
communication
High output,
L11767 660 □0.31 13 20 ①
wide directivity
Optical
18 2.1 6
switches
High reliability,
L11767-0066L ϕ4.65 7 ⑤
narrow directivity
High output,
L6108 □0.25 ①
wide directivity
5.5
L6112 ϕ1.15 ② High output
Optical
670 25 1.8 5 20
switches
High reliability,
L6112-01 ϕ4.65 ⑤
narrow directivity
2.5
High reliability,
L6112-02 ϕ1.15 ③
wide directivity
* POF core diameter=ϕ1 mm, length=1 m, Z (distance between the top surface of the cap and the fiber end)=0.3 mm
6 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Near-infrared LEDs Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
830 to 945 nm These near-infrared LEDs have a peak emission wavelength in the 830 to 945 nm range. They are used in a wide range of applications
including optical switches and encoders.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
Optical
L14336-0083R 830 40 ϕ0.75 16 1.5 20 50 ② High output
switches
High reliability,
L11913 25 ϕ4.65 3.4* 1.45 20 20 ⑥ Encoders
superior collimation
1 Wide directivity,
L13141-0085K 30 ϕ0.11 2.8 ⑦
current confinement type
3
L13142-0085K 35 ϕ0.4 1.7 25 ⑧
Narrow directivity,
850 3
current confinement type
Optical
L13142-0085L 30 ϕ4.65 50 ⑥
switches
High output,
L14096-0085GL 25 ϕ1.4 23 1.9 20 ⑭
narrow directivity
High output,
L14337-0085R 45 ϕ0.75 13 1.5 50 ②
high-speed response
* Light output
7 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Near-infrared LEDs Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
830 to 945 nm These near-infrared LEDs have a peak emission wavelength in the 830 to 945 nm range. They are used in a wide range of applications
including optical switches, optical fiber communication, near-infrared lighting, and encoders.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
POF data
L8013 ϕ1.15 45 µW*1 1.45 50 30 ⑦ Easy fiber alignment
communication
High reliability,
L9437 ϕ4.65 1.6*2 1.5 30 ⑥ Encoders
superior collimation
870
High output, Optical
L10843 □0.39 23 1.45 50 50 ①
wide directivity switches
Optical
L11368-01 35 ϕ1.7 65 µW*3 2 50 50 ④ Current confinement type
communication
80 1.45 200 Large current, high output, Near-infrared
L12170 ϕ5.0 ⑪
1200 2.4 3000*4 narrow directivity lighting
8 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Near-infrared LEDs Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
830 to 945 nm These near-infrared LEDs have a peak emission wavelength in the 830 to 945 nm range. They are used in a wide range of applications
including optical switches and near-infrared lighting.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
Optical
L9338 945 60 ϕ0.75 15 1.34 0.3 50 ② High output
switches
9 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Near-infrared LEDs Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
1.2 to 1.55 µm These high output near-infrared LEDs have a peak emission wavelength at 1 μm or higher. 1.2 μm, 1.3 μm, 1.45 μm, and 1.55 μm peak
emission wavelength types are available. They are used for analysis, near-infrared lighting, etc.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
10 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Near-infrared LEDs Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
1.2 to 1.55 µm These high output near-infrared LEDs have a peak emission wavelength at 1 μm or higher. 1.2 μm, 1.3 μm, 1.45 μm, and 1.55 μm peak
emission wavelength types are available. They are used for moisture measurements, analysis, near-infrared lighting, etc.
Measurement
Peak emission Spectral half Forward Cutoff condition
Emitter area Radiant flux Application
Type no. wavelength width voltage frequency Photo Directivity Features
Forward current examples
(nm) (nm) (mm) (mW) (V) (MHz) (mA)
11 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Mid-infrared LEDs Mid-infrared LEDs with peak emission wavelengths in the mid-infrared region (3.3 μm, 3.9 μm, 4.3 μm) feature high output and
are used for gas detection. They are used in combination with quantum type detectors such as InAsSb photovoltaic detectors.
Measurement
Peak emission Spectral Forward Rise time condition
Emitter area Radiant flux* Application
Type no. wavelength* half width* voltage* max. Forward current Photo Directivity Features
examples
QCW mode
(nm) (nm) (mm) (mW) (V) (µs) (mA)
High output,
L15893-0330ML 2.6 ⑨
narrow directivity
0.67 × 0.77 1 80
L15894-0390CA Surface mount type
⑯
Surface mount type,
L15894-0390CN 1.4
windowless Reference light
3900 600 2.2 source for gas
High output, detection
L15894-0390MA ⑩
high reliability
High output,
L15894-0390ML 2.4 ⑨
narrow directivity
* IF=80 mA, QCW (quasi continuous wave) mode (pulse width=100 µs, duty ratio=50%)
12 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Mid-infrared LEDs Mid-infrared LEDs with peak emission wavelengths in the mid-infrared region (3.3 μm, 3.9 μm, 4.3 μm) feature high output and
are used for gas detection. They are used in combination with quantum type detectors such as InAsSb photovoltaic detectors.
Measurement
Peak emission Spectral Forward Rise time condition
Emitter area Radiant flux* Application
Type no. wavelength* half width* voltage* max. Forward current Photo Directivity Features
examples
QCW mode
(nm) (nm) (mm) (mW) (V) (µs) (mA)
High output,
L15895-0430ML 1.4 ⑨
narrow directivity
* IF=80 mA, QCW (quasi continuous wave) mode (pulse width=100 µs, duty ratio=50%)
13 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Special LEDs
SIP type LEDs
These are compact, plastic SIP (single inline package) LEDs with a lens in which the LED chip is molded in transparent resin. (Typ. Ta=25 °C)
High output
L10881 650 25 max. -4.5 dBm*1 1.9 20 ⑰
for 156 Mbps optical link
14 / 19
Directivity (L11767)
Application Red Near-infrared Mid-infrared Special Technical Related
Directivity (typical examples) Home Lineup
examples LEDs LEDs LEDs LEDs
Directivity
note information
Metal package
① Resin potted type (no reflector) ② Resin potted type (with reflector) ③ Flat cap
10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C)
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
40° 40° 40° 40° 40° 40°
Relative light output (%) Relative light output (%) Relative light output (%)
10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C)
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
40° 40° 40° 40° 40° 40°
Relative light output (%) Relative light output (%) Relative light output (%)
Metal package Plastic package Surface mount type SIP type LEDs 15 / 19
L13141 directivity Directivity [Low-profile flat cap (with ball lens)] Directivity
Metal package
⑦ Low-profile flat cap ⑧ With ball lens ⑨ With reflector
(Typ. Ta=25 °C, distance between LED and photodiode: 3 cm)
10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10°
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
40° 40° 40° 40° 40° 40°
Plastic package
⑩ With AR coating ⑪ Bullet-shaped (ϕ5 mm) ⑫ Bullet-shaped (ϕ3 mm)
(Typ. Ta=25 °C, distance between LED and photodiode: 5 cm)
10° 0° 10° 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C)
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
40° 40° 40° 40° 40° 40°
KLEDB0422EA KLEDB0477EA KLEDB0549EA
50° 50° 50° 50° 50° 50°
Relative light output (%) Relative light output (%) Relative light output (%)
Metal package Plastic package Surface mount type SIP type LEDs 16 / 19
Directivity (COB) Directivity (COB with lens) Directivity
10° 0° 10° 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C)
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
Relative light output (%) Relative light output (%) Relative light output (%)
⑯ Ceramic type
(Typ. Ta=25 °C, distance between LED and photodiode: 5 cm)
10° 0° 10°
20° 20°
30° 30°
40° 40°
50° 50°
60° 60°
KLEDB0461EA KLEDB0462EA KLEDB0500EA
70° 70°
80° 80°
90° 90°
100 80 60 40 20 0 20 40 60 80 100
KLEDB0554EA
Metal package Plastic package Surface mount type SIP type LEDs 17 / 19
Directivity Directivity Directivity
10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C) 10° 0° 10° (Typ. Ta=25 °C)
20° 20° 20° 20° 20° 20°
30° 30° 30° 30° 30° 30°
40° 40° 40° 40° 40° 40°
Relative light output (%) Relative light output (%) Relative light output (%)
Metal package Plastic package Surface mount type SIP type LEDs 18 / 19
Application Red Near-infrared Mid-infrared Special Technical Related
Home Lineup Directivity
examples LEDs LEDs LEDs LEDs note information
Precautions
Disclaimer
Safety consideration
Metal, ceramic, plastic package products
Unsealed products
Surface mount type products
Compound opto-semiconductors (photosensors, light emitters)
www.hamamatsu.com
19 / 19