Document date: 6/11/2024

Share code 55nnkhf9

AXC-EX 500-6/19°-2-PV Item no.

(200) (2.2 kW) S IE3
Description
Axial fan of the AXC-EX series:
- suitable for continuous operation in temperatures between -20°C and 60°C.
- The fans could be used for zones 1 or 2, field of application II, for gases of groups IIA, IIB and H² and
temperature classes T1 to T4. The fans are classified to category 2G. The fans are certified under the no
TPS 21 ATEX 085751 0010 X.
- Explosion proof marking: II 2G Ex h IIB+H² T4 Gb
Impeller:
- The adjustable blade angle allows flexible and exact adjustment to the desired working point with
optimum efficiency. The blade angle is pre-set in the factory.
- Impellers with profiled blades made of cast aluminum alloy.
- Dynamically balanced according to ISO 21940-11 and ISO 14694, balancing quality G6,3.
Casing:
- Manufactured from hot-dip galvanized sheet steel according to ISO 1461 (or optionally on request in
stainless steel 1.4404).
- Pre-drilled, rolled Eurovent 1/2 flanges pressed on both sides provide additional stability.
- Aluminum anti-spark ring.
- Pre-wired terminal box on fan casing for easy electrical connection, IP65 (IEC 60034-5).
- PV version: Includes bolt-on outlet guide vanes which increases fan pressure and efficiency.
Motor:
- Ex d three-phase asynchronous motors with squirrel cage rotor.
- Protection class IP55 (IEC 60034-5), insulation class F.
- The motors are equipped with PTC thermistors for motor protection.
- Speed controllable via frequency converter, suitable for turn down to 10 Hz.
The AXC-EX axial fans have been tested in Systemair’s AMCA accredited Laboratory according to ISO
5801 and AMCA 210.

Required point Performance curve

Airflow (Q) 9,500 m³/h
Static pressure 400 Pa
Air density 1.204 kg/m³

Working point
Airflow (Q) 9,646 m³/h
External static pressure (pstat 412 Pa
-p_acc)
Additional pressure drop 0 Pa
(p_acc)
Fan static pressure (pstat) 412 Pa
Dynamic pressure (pd) 112 Pa
Air velocity 13.6 m/s
Total Efficiency (eta) 69 %
Shaft power (P2) 2.03 kW
Max. shaft power (P2max.) 2.46 kW
Impeller angle 19°
FEI (Fan Energy Index, AMCA 1.38
214-21)

Technical Data
Motor form B3
Blades 6 Power diagram
Voltage/frequency 3~400V/50Hz
Nominal motor power 2.20 kW
Poles 2
Nominal motor speed 2,866 rpm
In 4.3 A
Ia/In 8.4
Motor frame size 90L
Protection class motor IP55
ISO-class motor F
Fan weight 95 kg
Fan weight with accessories 114 kg
According to VDE/EN standards, nominal current tolerance can be up to
±10%. For operation with frequency converter use sine filter or EMC-kit.;
The frequency converter must be installed outside of the potentially
explosive atmosphere for operation in hazardous areas!

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
1/7
 Sound data
63 125 250 500 1000 2000 4000 8000 Tot Hz
Sound power (inlet)¹ 68 78 87 91 91 89 84 77 96 dB(A)
Sound power (outlet)² 70 80 89 93 93 90 86 79 98 dB(A)
Sound power (around)³ 64 74 83 87 87 84 80 73 92 dB(A)
Sound pressure Lp 48 58 66 71 71 68 64 57 76 dB(A)
1 - according to ISO, 2 - according to ISO,3 - calculated value, Lp: free field conditions, Inlet Sound pressure
level(Lp) distance: 3m

Documents
Type examination certificate
EU Declaration of conformity (pdf)
Installation and Operating Instructions (Axial fans/Jet fans)

Accessories
311287 MFA-AXC/AM 500 mounting foot 2
308415 EV-EX 500 2
8380 GFL-AR/AXC 500 counter flange 2
36414 REV-3POL/ATEX-11kW R/Y 1
30546 FSD3 AXC spring set 4 ≤168kg 1

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
2/7
Specification text

AXC-EX 500-6/19°-2-PV

Axial fan of the AXC-EX series suitable for continuous operation in temperatures between -20°C and 60°C. CE mark of
conformity by BSI.
The fans could be used for zones 1 or 2, field of application II, for gases of groups IIA, IIB and H² and temperature classes T1
to T4.
The fans are classified to category 2G. The fans are certified under the no TPS 21 ATEX 085751 0010 X.
Explosion proof marking: II 2G Ex h IIB+H² T4 Gb.

Impeller:
Impellers with profiled blades made of cast aluminum alloy.
Dynamically balanced according to ISO 21940-11 and ISO 14694, balancing quality G6,3

Casing:
Manufactured from hot-dip galvanized sheet steel according to ISO 1461 (or optionally on request in stainless steel 1.4404).
Pre-drilled, rolled Eurovent 1/2 flanges pressed on both sides.
Aluminum anti-spark ring.
Pre-wired terminal box on fan casing IP65 (IEC 60034-5).
PV Version includes bolt-on outlet guide vanes.

Motor:
Ex d three-phase asynchronous motors with squirrel cage rotor.
Protection class IP55 (IEC 60034-5), insulation class F.
The motors are equipped with PTC thermistors for motor protection.
Speed controllable via frequency converter.

Working point
Airflow (Q) 9,646 m³/h
External static pressure (pstat-p_acc) 412 Pa
Additional pressure drop (p_acc) 0 Pa
Fan static pressure (pstat) 412 Pa
Dynamic pressure (pd) 112 Pa
Air velocity 13.6 m/s
Total Efficiency (eta) 69 %
Shaft power (P2) 2.03 kW
Max. shaft power (P2max.) 2.46 kW
Impeller angle 19°
FEI (Fan Energy Index, AMCA 214-21) 1.38

Technical Data
Motor form B3
Blades 6
Voltage/frequency 3~400V/50Hz
Nominal motor power 2.20 kW
Poles 2
Nominal motor speed 2,866 rpm
In 4.3 A
Ia/In 8.4
Motor frame size 90L
Protection class motor IP55
ISO-class motor F
Fan weight 95 kg
Fan weight with accessories 114 kg

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
3/7
 All dimensions in mm
Dimensions

Front

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
4/7
 Right
All dimensions in mm
Dimensions

Left

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
5/7
Wiring diagram

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
6/7
Performance curve

Power diagram

Efficiency diagram

AXC-EX 500-6/19°-2-PV (200) (2.2 kW) S IE3 Item no.

Systemair configurator 1.29.1 | March 2023 Document date: 6/11/2024
7/7