MSHS-ASAC 120 and 420 Actuators 2023-08

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ASAC 120 and 420 Actuators

ASAC is a high-performance actuator, designed for fuel rack posiƟoning on diesel engines in conjuncƟon with all
versions of the DEGO speed governor systems.

Features Concept
The nominal conƟnuous output torque is 120Nm for ASAC 120 The actuator system is based on an advanced control unit to-
and 420Nm for ASAC 420. The peak torque for the actuators, gether with an actuator. The system covers all typical marine
during the first 2s of actuaƟon, is 260Nm and 800Nm. and land based engines with tradiƟonal camshaŌ driven fuel
pumps.
A useful feature that comes with the all-electric concept is the
possibility to move the fuel rack at engine standsƟll. Together The actuator control unit is installed close to, but not on the
with the Fuel Pump MoƟon program in the DEGO governor engine. It contains a communicaƟon and supervision module
the maintenance of the fuel pumps is much simplified leading together with a power amplifier.
to less downƟme and beƩer control of the fuel injecƟon.
The actuator is installed on the engine and consists of a brush-
less AC servo motor, a high precision gearbox, a juncƟon box,
an arm that is connected to the fuel rack and a foot or flange
that is mounted on the engine.
The dimensions and required cabling are compaƟble with the
previous ABB ASAC actuators (ASAC 70, ASAC 200 and ASAC
400) and with Wärtsilä, Lyngsö, Kongsberg and Nabtesco .

The actuator is maintenance-free. The motor and the resolver


feedback system are brushless and the gear is lifeƟme lubrica-
ted.
The actuator is provided with mechanical and electrical max
and min stops. This means safe operaƟon of the external shut-
down system in case of a malfuncƟon in the actuator system.
The resolver feedback system is rugged (no bearings) and at
the same Ɵme provides a feedback signal to the governor with
high resoluƟon and linearity.
The command and feedback signals are standardized allowing
the ASAC system to be controlled by other governors or con-
trol devices giving a command signal in analog format (4-
20mA), PWM format or via a CANOpen fieldbus communi-
caƟon.

MSHS.COM • [email protected][email protected][email protected] www.qtagg.com

2022-12
ASAC Actuators (conƟnued)

SpecificaƟons

Actuator type ASAC 120 ASAC 420


Type number 2613 4120 2613 4420
Nominal ConƟnuous Torque 120 Nm 420 Nm
Peak torque 260 Nm 800 Nm
Angular movement 20-60° Adjustable
DirecƟon of RotaƟon CW or CCW
Weight incl foot 20.0 kg 49.0 kg
Dimensions Height = 240 mm Height = 308 mm
Width = 190 mm Width = 280 mm
Length = 240 mm Length = 500 mm
Enclosure IP 54 (motor and gear IP65)
Ambient temperature 70°C
Ambient humidity 98% Non-condensing
VibraƟon 5-25Hz 1.6mm; 25-100Hz 4.0g
Response Ɵme (36°) 200-250 ms <300 ms
PosiƟoning accuracy 3 arcmin (0.05°)
Backlash Nil
Lost moƟon Less than 3 arcmin
Nominal Current 11.5A 12.5A
Peak Current 20.0A 25.0A
Nominal Voltage 48V 155V
PosiƟon feedback Resolver
Limit switch One dry-reed homing switch
Motor temp sensor PTC
CerƟficaƟons DNV, Lloyds Register, Bureau Veritas, RINA
CE (on request)

MSHS.COM • [email protected][email protected][email protected] www.qtagg.com

You might also like