BURADA VERILEN TUM TEKNIK VERILER VE BILGILER BASE STUDIO ARGE VE TEKNOLOJI

SAN.AS.'NIN MULKIYETINDEDIR. BASE STUDIO ARGE VE TEKNOLOI SAN.AS.'NIN IZNI

YAZILI
OLMADAN VERI VE BILGILER TAMAMEN VEYA KISMEN UCUNCU TARAFLARA ACIKLANAMAZ.

SHAFT / MIL DIN 5480-W85x2.00x41- 8g QCC DESCRIPTION INTERNAL TOOTHING IÇ

/ DISLI
NUMBER OF TEETH DIS SAYISI z 41 SRC1 MATERIAL SPECIFICATION NUMBER OF TEETH DIS SAYISI z 77,000
MODULE MODUL m 2.00 MC01 DIMENSION⌀85 FACEWIDTH (mm) DIS GENISLIGI (mm) b 31,000
PITCH DIAMETER BOLUM DAIRESI CAPI Dp ⌀82 MC02 DIMENSION⌀84.60 NORMAL MODULE(mm) NORMAL MODUL (mm) mn 2,250
PRESSURE ANGLE KAVRAMA ACISI a 30° MC03 DIMENSION 65.75 PRESSURE ANGLE KAVRAMA ACISI a 20,000
n
TIP CIRCLE DIAMETER DIS USTU CAPI d
a1 ⌀84.6 h11 MC04 DIMENSION⌀190.50 REFERENCE PROFILE
MC05 DIMENSION 72.25
⌀80.60 max
d ADDENDUM FACTOR DIS USTU SABITI * 0.876
ROOT DIAMETER DIS DIBI CAPI Ff1 haP
MC06 DIMENSION 89.073/89.017 DEDENDUM FACTOR DIS DIBI SABITI * 1.250
TIF (TRUE INVOLUTE FORM) DIAMETER GEF (GERCEK EVOLVENT FORM) CAPI)
dFfe ⌀80.888 hfP
DIMENSION 167.626/
⌀84.380 MC07 DIS USTU RADYUS FAKTORU
TIP RADIUS FACTOR * 0.000
APS (AKTIF PROFIL SON) CAPI
EAP (END OF ACTIVE PROFILE) DIAMETER. dFai 167.538 rhoaP
DIS DIBI RADYUS FAKTORU
MAX. EFECTIVE TOOTH THICKNESS MAK.EFEKTIF DIS KALINLIGI S
vmax 3.591 MC08 DIMENSION 58.684/58.712 ROOT RADIUS FACTOR *
rhofP
0.471

PROTUBERANCE HEIGHT FACTOR PROTUBERANS YUKSEKLIK FAKTORU * 0

S hFaP
MIN. EFECTIVE TOOTH THICKNESS MIN.EFEKTIF DIS KALINLIGI vmin 3.571
PROTUBERANCE ANGLE PROTUBERANS ACISI * 0
alfprP
GERCEK MAK.DIS KALINLIGI
ACTUAL MAX.REFERENCE TOOTH THICKNESS S 3.571
max RAMP ANGLE RAMPA ACISI alfKP 0

ACTUAL MIN. TOOTH THICKNESS. GERCEK MIN.DIS KALINLIGI S 3.535 PROFILE SHIFT COEFFICENT PROFIL KAYDIRMA SABITI x -0.080
min
REFERENCE DIAMETER
(mm) REFERANS CAPI d 173,250
MEASURING PIN DIAMETER OLCUM PIM CAPI D
M ⌀4
TIP DIAMETER
(mm) DIS USTU CAPI do (+0.100)
⌀169.670
ACTUAL MAXIMUM DIAMETRAL M (0.000)
GERCEK MAX.CAPSAL OLCU MC06 REmax 89.073
MEASUREMENT OVER TWO PINS. ROOT DIAMETER
(mm) DIS DIBI CAPI df ⌀179.235
(+0.220)
(+0.302)
ACTUAL MINIMUM DIAMETRAL M
GERCEK MIN.CAPSAL OLCU REmin 89.017 TIF (TRUE INVOLUTE FORM) DIAMETER (mm) TIF ÇAPI (GERCEK EVOLVENT FORM) dFf
MEASUREMENT OVER TWO PINS.

0.45-0.7
NUMBER OF TEETH SPANNED OLCULECEK DIS SAYISI k 8
MEASUREMENT BETWEEN TWO PINS MAX
(mm) IKI PIM ARASI OLCUM MAKS (mm) M Max
i 168.780MC07

0.6-0.9
BASE TANGENT LENGTH KIRIS OLCUSU Wk 45.000/44.969 MEASUREMENT BETWEEN TWO PINS MIN
(mm) IKI PIM ARASI OLCUM MIN (mm) M Min
i 168.864
9

5
0.
0.
6- PIN DIAMETER
(mm) PIM CAPI(mm) d
b 3.75
DIS KALITESI (DIN 3962-63)
ACCURACY GRADE IN ACCORDANCE WITH DIN 3962/63:1978 Q 10
CASE HARDENING /SEMENTASYON
NUMBER OF TEETH SPANNED OLCUM YAPILACAK DIS SAYISIk 9
HRc 60~63
SURFACE TOOTH HARDNESS:
BASE TANGENT LENGTH (NO BACKLASH) (mm) KIRIS OLCUSU(DIS BOSLUGUYOK)
Wk 59.009
DIS YUZEY SERTLIGI:
ACTUAL BASE TANGENT LENGTH ('SPAN') GERCEK KIRIS OLCUSU (mm) Wk.e/i 59.084/59.112MC08

MC03
65,75+0,1
64,5±0,1
22,75±0,2
14,75±0,1
R10+0,5
3,2
1,6
40+1 MIN. USABLE LENGHT
⌀100 +0,5
Y
MIN. FAYDALI UZUNLUK R40
PITCH DIAMETER (BOLUM DAIRESI CAPI)

22,5°
±5°
⌀160+0,5
ROOT DIAMETER (DIS DIBI CAPI)
TIP DIAMETER (DIS USTU CAPI)

X
3,2 1,6
RAW MATERIAL: ANNEALED ROD HAM MALZEME: TAVLANMIS MALZEME
HEAT TREATMENT ISIL ISLEM
30° ±5°

+0,004)
⌀84,6 h11(-0,22)
±5°
PARTIES WITHOUT ANY WRITTEN PERMISSION OF BASE STUDIO ARGE VE TEKNOLOJI

⌀190,5 k6(+0,033
+0,003)
A.S.

+0,1
-QUENCHED AND TEMPERED -SERTLESTIRME VE MENEVISLEME

⌀196,815+0,5
1
⌀85 k6(+0,025

⌀184,5-0,5
22,5°

◎ 0,05 X
⌀80,6

⌀67±0,3

⌀92±0,2
-CORE HARDNESS:30-38 HRc -CEKIRDEK SERTLIGI:30-38 HRc
⌀82

FINAL HEAT TREATMENT SON ISIL ISLEM

-CASE HARDNESS:HRc>58-62 -YUZEY SERTLIGI:HRc>58-62
-CASE DEPTH:0.45-0.90mm -YUZEY SERTLIK DERINLIGI:0.45-0.90mm
MC01

-CASE DEPTH EFFECTIVE 550 Hv1 -ETKIN YUZEY SERTLIK DERINLIGI: 550Hvl
30°

MC04
4
MC02

FOR MISSING DIMENSIONS REFER TO THE VERILMEYEN OLCU VE DETAYLAR ICIN 3D DATA
R10+1
3D MODEL. REFERANS ALINACAKTIR.
SURFACE COATING: MANGANESE PHOSPATING YUZEY KAPLAMA: MANGAN FOSFAT
3,2
PART TO
DATA AND INFORMATION SHALL NOT BE DISCLOSED IN WHOLE OR IN THIRD

COATING THICKNESS:5-10
µm. KAPLAMA KALINLIGI:5-10µm.

31+0,3 REMOVE BURRS AND SHARP EDGESKESKIN

/ KOSE VE CAPAK OLMAYACAK.
5 +0,1
MC05 CLEANLINESS STANDARD/TEMIZLIK STD. BES-GS-1001

72,25+0,3 74,25+0,2 B MARKING STANDARD/

MARKALAMA STD. BES-GS-1002
°
°
±5 6,3
(3,2 1,6
)
°

SECTION A-A
30° ±5

45 Material Hardness/Shore
Chamfers +1,6 -0,2 Gen. Tolerances Surface Quality
Pahlar Gen.Toleranslar Yuzey Kalitesi Malzeme Sertlik

ISO 13715 ISO 2768-mK Ra in um BES-MS-1002

15°
Confidencial, reservados todos os direitos DIN 34

Welding Std. Tolerancing Surface Protection Mass (kg) Scale Proj.Type

Kaynak Std. Tolerans Yuzey Koruma Agirlik Olcek
CAD
+5°
STUDIO.THE

+0,1
R1 MAX 0,5 4,872 1:2
Vertraulich, alle Rechte vorbehalten DIN 34

TS3004/EN22553 EN ISO 1101 ISO 1302

BASE

Confidential, all rights reserved DIN 34

+0,5
13,5
ALL TECHNICAL DATA AND INFORMATION GIVEN HERE ARE THE PROPERTY OF

Date/Tarih Name/isim Description

Parca Tanimi
R3+0,2 Drawn
Cizen 28.03.2024 Baris BAG RING GEAR Z77
Check
Kontrol 28.03.2024 A.REYHAN
ÇEMBER DİŞLİ Z77
45°

App.
+1°

Onay 28.03.2024 M.KESKIN

R8-0,5 0,5 Drawing No./Docu-No. Sheet

Resim No./Dokuman No. Sayfa No.
R3
R5+0,5
B(7:10)
R1 MAX 00
RELEASED.
YAYINLANDI.
2024012128.03.2024 B.BAG M.KESKIN 511-00904201 1 of 1

Rev. Rev. descr. (shop and eng. info only) Rel.Nr Date draw. Name App. A2