1 - Installing Redhat Linux On Virtual Machine
1 - Installing Redhat Linux On Virtual Machine
1. Click on OK and note that the Right Control is the host key ( a key you press to
return to normal operation)
2. The installation now begins , choose Install or upgrade an existing system and press
enter
3. You may test for the media by clicking OK or just Skip, use tab to select option
4. Choose Next
5. Choose English(English) as the language on installation and click Next
.
7. Leave the default Basic Storage Devices as the device types and click Next
Accept the write changes to disk option, the system will be creating the appropriate
logical partitions, and volumes
13. On the softwares to install section choose server type as basic and choose customize
now for software selections
14. Choose all under Base system
15. Choose as shown above under Servers
16. Choose none under web services, databases, virtualization and language
17. Choose all under Desktops and Development
18. Then click Next, the installation process will begin and take some time.
19. After installation is finished the system will ask for reboot
20. After rebooting a welcome screen appears with some more steps to setup the
systemClick Forward
21. Click yes I agree to the license agreement and press forward
22. This sceen will set up software updates using the network connection but it can be
skipped Click forward
23. Here you will be asked to create a non-administrative user, just fill in the user and
passwords and click forward
24. Here you can set the date and time of the server and click forward
25. Here click to enable kdump and click finish, and click Yes to reboot since this change
requires a reboot.
26. After rebooting and loggin in as the new user or root ,the linux virtual machine is up
and ready for use.
40.6. Then to activate eth0 use the network icon on the top right corner , click on it ,
chose system-eth0 which will refresh the settings.
40.7. Now check by pinging the ip address form the host machine and the virtual
machine.
Cloning
To have a new machine similar to the one already installed , you can just clone the
already created virtual machine. The steps to clone this machine are
Rightclick on the virtual machine corresponding to the created server and choose
clone
Ater cloning