Scribd
Upload
61 views5 pages

Peplink With Starlink Faq

Uploaded by

Abdalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views5 pages

Peplink With Starlink Faq

Uploaded by

Abdalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

STARLINK

PEPLINK
What are the common challenges How can Peplink fit into my What is the standard deployment
of Starlink Connectivity? Starlink setup? suggestion?

Due to the nature of LEO satellite Peplink allows you to combine You can find the suggested setup for
connectivity, Starlink connections may Starlink with other types of different scenarios on our dedicated
be negatively affected by the connections, like 5G and LTE. Real Starlink page.
following: time applications like Zoom,
Teams and other real time services Learn more at:
• Bad weather (e.g. rain/ snow) stay stable and smooth. https://www.peplink.com/starlink
• Obstructions between the antenna
and the sky
• Nearby users also using Starlink
Which models are suggested What are the optimal Peplink settings for
for Starlink deployments? use with Starlink?

We typically recommend these These are the recommended settings for a stable Starlink SpeedFusion
products along with integration Starlink/ Peplink network. Note that these Solutions Connect
with our SFC Companion App: settings will consume more bandwidth but will
• BR1 Mini HW3 ensure a stable connection. For cost-saving
• BR1 Pro 5G failover approaches, you can refer to other parts Mobility 42G
• Balance 20X of the FAQ.
• Transit Duo Pro Cellular
• WAN Smoothing - Normal SpeedFusion
We go into more detail on our • FEC - Low
dedicated Starlink page: • Traffic Distribution - Dynamic Weighted Bonding Wi-Fi WAN
https://www.peplink.com/starlink • Congestion Latency Level - Low
Starlink BR1 Pro 5G
Satellite

What Peplink features work

STARLINK
well with Starlink? Starlink Antenna

SFC Protect

SFC Protect is an optional service


that combines Starlink with your
4G/5G service for truly seamless AND
SPEEDFUSION
Zoom, Teams VoIP calls, as well
as other important applications.

SFC 5G/LTE

If you don't already have a data


plan, SFC 5G/LTE is available as
an on-demand option. We
automatically connect your
device to the carrier with the
best signal in the area. Great for
a failover option for your
Starlink.
What does a typical Starlink/ Why should I have a
Peplink setup look like in an RV? failover option for Starlink?

Let's take a look at the setup of one Starlink connections are


of our users: prone to disruptions due to
factors outside of the user's
• Starlink - while stationary control. A backup failover
• MAX Transit Duo Pro with two connection is important to
cellular data plans - while on the ensure your applications
go & as failover for their Starlink won't stutter.
• Mobility 42G antenna - for
enhanced 5G/ LTE signal reception.

Boondachshunds Setup:
https://www.boondachshunds.com/c
onnectivity-on-the-road

RECREATIONAL
MobileMustHave Setup:
starlink.mobilemusthave.com

VEHICLES Can I configure the threshold for


falling back to lower priority WANs?
Boondachshunds
Wi-Fi Devices Mobility 42G Setup
Yes, you can configure threshold
settings via Web Admin > WAN
Connection Status > Signal
Threshold Setting.

This is great for situations where a MobileMustHave


AP One AX Lite decent cellular connection would Setup
work better than a subpar Starlink
connection in your current location.

8-Port PoE Switch Instructions:


Transit Duo Pro Starlink Antenna
https://www.peplink.com/forumlink
s/setting-a-threshold-for-failover Configuration
Instructions
Would it be beneficial to have Can I optimize my network to route different
multiple Starlink connections? network traffic over separate connections?

If you truly are in the middle of Yes, you can set outbound policies via the Web
nowhere, with no secondary Admin settings to mange your network traffic. For
options for connectivity, an example, route large downloads through Starlink
additional Starlink connection or direct all your important VoIP calls through SFC
might be your only option for a Protect.
failover connection. Multiple
Starlinks can also provide more
stable upload and download
speeds.

Multi-Starlink Usage:
https://svrenaissance.com/reliabl
e-remote-work-with-starlink/#disa
bling-starlink-motors-but-why-ho
wp Ilker’s Setup SpeedFusion

How can I combine two WORK FROM


HOME
Starlink connections together?

Set the Starlink routers to bypass


mode and use the ethernet
adaptor to connect them to the Mobility 42G
WAN ports of your Peplink router.
InControl 2 InTouch
With SpeedFusion, you can then
bond the two Starlink connections Balance 20X
into one larger bandwidth tunnel
for faster speeds. Balance 20X
Internet
SpeedFusion:
https://www.peplink.com/speedfu
AP One AX Lite Wi-Fi Devices
sion
What does a typical Starlink/ Peplink What factors would impact How should I set the network
setup look like on a boat? StarLink connectivity on a boat? priority for Maritime usage?

Starlink/ Peplink setups on a boat are Obstructions and shadowing from You can configure your preferred
fundamentally quite similar to those on the mast and sails, and how close it settings in your Peplink router's Web
RVs. is to radars can impact performance. Admin settings.
Big waves that tilt the boat may also
An example setup would be: affect connectivity. An example while docked would be:
• Starlink - while on the open seas • Starlink as Priority One
• MAX BR1 Pro 5G - while docked & as • Wi-Fi WAN from the marina Wi-Fi as
failover for Starlink near the shore Priority Two
• Maritime 42G antenna - for enhanced • Cellular as Priority Three.
signal reception with high gain.
If Starlink fails, then Wi-Fi WAN will
Onboard Wireless Setup: be used. If Wi-Fi WAN is not
https://onboardwireless.com/Using-StarLin Onboard Wireless available, then cellular will be used.
k-with-a-Peplink-cellular-router-for-reliable- Setup
internet-connectivity_b_10.html

MARITIME
APPLICATIONS
2x Maritime 40G

2x Starlink

MBX Mini

2x AP One AX

You might also like