Retrofit Kit Installed outside conveyor transfer point skirtboards, Martin® External Wear Liner Retrofit Kit is an economical upgrade that improves skirtboard sealing and prevents spillage. Wearliner can typically be installed without requiring work inside chute or interfering with existing chute supports.
Martin® External Wear Liner can easily be installed on existing
studs in applications already using Martin® ApronSeal™ skirting and clamps.
Item Part Number
BENEFITS External Wear Liner Retrofit Kit 38481-XXXS Improves Sealing Keep the burden of cargo away from sealing system. Existing Simple Installation Chutewall Wear liner plates mount to the outside of existing transfer point skirtboard, without interfering with existing supports.
Easy Adjustment Jack screws provide precise adjustment of wear liner to reduce spillage.
Suits Cargo and Conditions
Available in 3/8 or 1/2 in. thick Brinnel 400 or Brinnel 500 abrasion-resistant plate. Fits conveyors with trough Wear Liner angles from flat to 35°. Standard length is 72 in. 8.00 (1829 mm). (203) 6.38 Improves Maintenance Belt (162) Replacing worn external wear liner requires minimal weld- ing and no chute entry.
38481 - X XX X XX 38481 - XX CR X X P/N 5-Digit Prefix P/N 5-Digit Prefix Wear Liner Material Wearliner Thickness Wear Liner Thickness Ceramic Backed ApronSeal™ Clamp Backing Material Wear Liner Length ApronSeal™ Clamp
WEAR LINER MATERIAL WEARLINER THICKNESS
4: AR400 50: .50 inch 5: AR500 C: 304 SS BACKING MATERIAL S: 316 SS P: Mild Steel C: 304 SS WEAR LINER THICKNESS S: 316 SS 25: .25 inch (AR400 & AR500 only) 38: .38 inch CLAMP 50: .50 inch Blank: No ApronSeal™ Clamp S: with ApronSeal™ Clamp APRONSEAL™ CLAMP Blank: without Clamp S: with Standard Clamp Q: with Quick Release Clamp (AR400 & AR500 only)
WEAR LINER LENGTH
Blank: 72 inches 48: 48 inches
Martin® External Wear Liner—Replacement Kit
38481 - X XX WK P/N 5-Digit Prefix Wear Liner Material Wear Liner Thickness
WEAR LINER MATERIAL
5: AR500
WEAR LINER THICKNESS
25: .25 inch 38: .38 inch 50: .50 inch
Martin Engineering USA
One Martin Place Neponset, IL 61345-9766 USA 800 544 2947 or 309 852 2384 Fax 800 814 1553 www.martin-eng.com