Corrigendum 1 Compressed

CORRIGENDUM-I
[Tender ID No.: 2022_AAI_136560_1]
Date: 23.12.2022
Sub: Construction of New Passenger Terminal Building for domestic operations at

Jodhpur Airport. Tender ID: 2022_AAI_136560_1
1. Reference may please be made to Tender Document for the above work published
through CPP Portal on 28.11.2022.
2. The following amendments in the above referred tender document/bid have been
incorporated: -
Sl RFP To be read as
No. page Existing Clause
No.
1 Article Airports Authority of India has Stands Deleted
16/Pag appointed M/s STHAPATI &
e 170 Associates Pvt. Ltd.” for this project
(Applicable where CONSULTANT is
involved). The CONSULTANT shall
be responsible for comprehensive
consultancy from Concept to
Commissioning stage including pre
tender designing, supervision and
entire contract management
including quality control along with
checking & certification of
contractor’s running & final bill and
recommendation for payment
during/post construction to
engineer-In- Charge, AAI
2 Article 16.5 Duties and Powers of 16.5 Duties and
16/Pag Engineer-In-Chagres’s Powers of Engineer-In-
e 170 Representative/CONSULTANT: Chagres’s
The duties of the representative of Representative:
Article the Engineer-in- The duties of the
3/page harge/CONSULTANT are to watch representative of the
116 and supervise the Works and to Engineer-in-Charge, are to
test and examine any materials to watch and supervise the
be used or workmanship employed Works and to test and
in connection with the works. They examine any materials to
shall have no authority to order any be used or workmanship
work involving any extra payment employed in connection
by AAI nor to make any variation in with the Works. He shall
the works. have no authority to order
The Engineer-in-Charge may from any work involving any
Corrigendum I - 1
time to time in writing delegate to extra payment by AAI nor
his representative any of the to make any variation in
powers and authorities vested in the Works.
the Engineer-in- Charge and shall
furnish to the Contractor a copy of The Engineer-in-Charge
all such written delegation of may from time to time in
powers and authorities. Any written writing delegate to his
instruction or written approval Representative any of the
given by the representative powers and authorities
of the Engineer-in-Charge to the vested in the Engineer-in-
contractor within the terms of such Charge and shall furnish
delegations shall bind the to the Contractor a copy
Contractor and AAI as though it of all such written
had been given by the Engineer-in- delegation of powers and
Charge. authorities. Any written
Failure of the representative of the instruction or written
Engineer-in-charge/ CONSULTANT approval given by the
to disapprove any work or Representative of the
materials shall not prejudice the Engineer-in-Charge to the
power of the Engineer-in- Charge Contractor within the
thereafter to disapprove such work terms of such delegations
or materials and to order the shall bind the Contractor
pulling down, and AAI as if it had been
removal or breaking up thereof. given by the Engineer-in-
If the Contractor shall be Charge.
dissatisfied with any decision of the Failure of the
Representative of the Engineer-in- Representative of the
Charge/CONSULTANT he shall be Engineer-in-Charge to
entitled to refer the matter to the disapprove any work or
Engineer-in Charge who shall materials shall not
thereupon confirm, reverse or vary prejudice the power of the
such decision. Engineer-in-Charge
16.6- Projects for which no thereafter to disapprove
CONSULTANT is appointed, such work or materials
Engineer-in-Charge and his/her and to order the pulling
representative shall carry out all down, removal or breaking
the foresaid works deemed to be up thereof.
carried out by Consultant
If the Contractor is
dissatisfied with any
decision of the
Representative of the
Engineer-in-Charge he
shall be entitled to refer
the matter to the
Engineer-in Charge who
shall thereupon confirm,
reverse or vary such
decision.
Corrigendum I - 2
3. DBR The Consultant is required to Stands Deleted.
,Page provide Project Management
12 Consultancy services covering a
multitude of airport related
disciplines. The objective is to
ensure an integrated and
comprehensive perspective for a
sustained and cost-effective
solution for the implementation and
operation of the ‘Construction of
Terminal Building, Ancillary
Buildings, Car Parking, City side
Development & other associated
works at Jodhpur Airport (India)
4. Schedu Note: Areas of the Note:
le B/ Buildings/Pavements/Associated (a) Areas of the Buildings/
Page Structures to be referred from the Pavements/ Associated
237 respective Drawings. The space of Structures to be referred
Switch rooms, MEP Services and from the respective
equipment rooms etc. earmarked in Drawings.
the drawings are indicative and to
be finalized based on actual (b) The space of Switch
equipment design and requirement rooms, MEP Services and
and to be worked out by the equipment rooms etc.
Contractor during detailed design earmarked in the drawings
stage. Any increase or decrease in are indicative and to be
the area due to this shall be finalized based on actual
deemed as included in the scope equipment design and
and cost. requirement and to be
worked out by the
Contractor during detailed
design stage. Any increase
or decrease in the area
due to this shall be
deemed as included in the
scope and cost.
5. P-424, Schedule G - SCHEDULE OF MAJOR Revised “Schedule G” is
COST CENTRE attached with this
corrigendum.
6. Page Schedule D, Annex-I (Part V) Revised List of Preferred
272- LIST OF PREFERRED MAKE make is attached with this
292 corrigendum
7. 1356, New Technical Specification for
para 1 Signage work - annexure
Annexu 1 is attached with this
re -1 corrigendum.
Corrigendum I - 3
8 Revised Drawings (Shall supersede respective drawings
uploaded with tender and subsequent query reply)
i. Land Use Plan- Dwg No. SAPL / JDH / TD / AR / LUP
ii. Site Plan- Dwg No. SAPL / JDH / TD / AR / SP
iii. Master Plan- Dwg No. SAPL / JDH / TD / AR / MP
iv. Site Barricading Layout- Dwg No. SAPL / JDH / TD / AR / SB
v. Master Plan External Layout - Dwg No. SAPL / JDH / TD / PL /MP/01
vi. Schedule of Finishes- Dwg No. SAPL / JDH / TD / AR/SOF/01
9 Additional Drawings
i. Landscape Plan- Dwg No. SAPL / JDH / TD / AR/LND/01
ii. Landscape Plan- Dwg No. SAPL / JDH / TD / AR/LND/02
iii. Typical details of proposed boundary wall
iv. Topographical Survey Plan.
Other terms & conditions remain unchanged.

This corrigendum- I containing 101 pages shall become part of the Tender Document
Manager (Engg-C) Manager (Engg-E)
AGM (Engg-C) AGM (Engg-E)
Jt. GM (Engg-C) Jt. GM (Engg-E)
GM (Engg-C) GM (Engg-E)
Approved By
ED (Engg)-NR
Corrigendum I - 4
SCHEDULE – G
Contract Price Weightages
SCHEDULE OF MAJOR COST CENTRE: For Item no 01 of SOQ
1.1 The percentage figure filled in column (4) by the AAI for the apportionment of the accepted
contract Amount for completion of the works corresponding to the item No. 1.01 and
payment shall be released for different cost centres as per percentage breakup of the
accepted contract sum of Item no 01.
1.2 The basis of payment of an activity / item on “Pro rata basis” shall be worked out as per
work done under column 3 on percentage mentioned in column 4 out of total scope of work
under each activity / item. In case work under against any sub activity/sub item isnot
completed in totality, the decision of Engineer-In-Charge for deciding percentage of
payment shall be final and binding on contractor. Further, sub cost centre, if required, shall
be decided by EIC.
1.3 The Contract Price for this Agreement is as per award letter issued by AAI based on the
amount quoted by the lowest bidder.
1.4 Proportions of the Contract Price for different stages of Construction of the Project shall
be as specified below:
(The break up of payable percentage has been worked out considering the estimated
cost put to the tender including CMC cost of the specialized equipments considering for
5 years after DLP of 2 years).
Break up Total
of payable (%)
Sl. No. Description of Item
payable of Item no
(%) 1.01
1 2 3 4
DESIGN DEVELOPMENT WORKS: Detailed Design of
1 1.50
various disciplines of the work:
Submission of drawings & documents / shop drawings in BIM
(i)
Model. 60.00%
Vetting the design from IIT/NIT and Obtaining approval of the
(ii)
entire design scheme from Engineer-in-Charge 20.00%
Submission & obtaining approval for As-built Drawings,
(iii)
operation & maintenance manuals 10.00%
(iv) Obtaining GRIHA -5 Certification 10.00%
PASSENGER TERMINAL BUILDING: COMPLETION
2
OF CIVIL & INTERIOR WORKS
2.1 Sub structure for PTB (excluding Basement area) 10.00
(i) Excavation and back filling 5.00%
(ii) RCC Raft /footings /plinth beams including PCC 50.00%
(iii) RCC retaining walls, shear wall, columns 20.00%
(iv) Grade Slab i/c sand filling, polyethylene sheet etc. 25.00%
Corrigendum I - 5
2.2 Reinforced Cement Concrete in Super Structure 18.00
(i) Columns & walls (Composite) 45.00%
(ii) Beams (Composite) 35.00%
(iii) Slabs, Stairs etc.

20.00%
2.3 Brick / Block Masonry i/c plastering & painting 4.00
(i) Ground level 55.00%
(ii) First level 45.00%
Woodwork & Joinery i/c fire & non-fire rated doors, frames,
2.4 0.90
SS hardwares etc.
2.5 Flooring & Dado 4.00
(iii) Forecourt - Arrival level 20.00%
(iv) Forecourt - Departure level 15.00%
Roofing including steel structure, fall protection systems
2.6 6.00
etc.
Structural Steel Works including Protective and Fire-Resistant
(i)
Coating 55.00%
Roof sheeting in double skin insulated standing seam for PTB,
Pier, FLB and double skin standing seam for Forecourt
(ii)
including all accessories, fall protection, walkways, roof hatch,
Sky-light, Tensile Fabric, gutters, downtakes etc.
40.00%
(iii) Testing & Commissioning 5.00%
2.7 Façade Systems including Internal Glazing / Cladding 4.00
(i) Supporting Structural Steel works including protective coating 20.00%
(ii) Supporting Aluminium/SS works 25.00%
(iii) Façade Glazing Works including doors, windows, hardwares 30.00%
Glazed partitions, doors, accessories, hardwares, safety films
(iv)
i/c lacquered glass cladding, 20.00%
(v) Testing & Commissioning 5.00%
2.8 False Ceiling Works 9.00
(i) Aluminium Linear Plank 32.00%
(ii) Aluminium Hook-On Planks 6.00%
(iii) Aluminium Vertical Baffle 8.00%
(iv) Woodwool Board Creative Ceiling 1.00%
(v) MW GI Lay-in 1.00%
(vi) Aluminium-Exterior Ceiling Hook-on System 52.00%
2.9 GRC Work 2.94
Corrigendum I - 6
(i) GRC Cladding 60.00%
(ii) Stainless steel sheet cladding 40.00%
Interior Wall finishes and miscellaneous items as per scope of
2.10 2.33
work
Lacquered Glass (Colour Glass),Glass Partition (Toughened
(i) Glass), Moss Wall, Metal inlay natural stone with POP
carving&3D Mural Walls 25.00%
High Pressure Laminate, Acrylic Solid Surface, Bamboo wall
(ii)
panel, Wood wool creative range board& Vertical Plantation 25.00%
Other finishing works and miscellaneous items as per scope
2.11
of work
(i) Toilet Cubicle & Check in counter 15.00%
(ii) SS Glass railing, Tensile Canopy & Expasnion Joint
10.00%
Automatic Bi-Parting Sliding Door,SS Fender railing (Crash
(iii)
Barrier) 15.00%
(iv) Expansion Joint & Fire Paint 10.00%
2.12 External Development work 4.00
(i) Road Work 40.00%
(ii) UGT 20.00%
(iii) Footpath 15.00%
(iv) Drain 10.00%
(v) Rain water harvesting 5.00%
(vi) Horticulture 10.00%
3 E & M WORKS
3.1 Sub-Station Equipments including DG sets. 1.44
(i) Approval of shop drawing & Technical Data sheet. 5.00%
(ii) Supply of materials 65.00%
(iii) Erection/ Installations of materials 25.00%
(iv) Testing & Commissioning 5.00%
Internal & External Electrical Installations i/c Lightings,
3.2 5.23
Automatic Sliding Door, UPS
(i) Approval of shop drawing & Technical data sheet 5.00%
3.3 Elevators & Escalators 1.41
Corrigendum I - 7
Water Supply system (Submersible pump, Hydro Pneumatic
3.4 Water Supply System, Water Treatment system, Centralized 2.12
RO, Drinking water fountains etc.)
Fire Hydrant System (Wet Riser/ Down comer) & Sprinkler
3.6 1.00
System
3.7 Fire Alarm System 0.61
HVAC System, VRV/VRF, Precision AC system,
3.8 pressurised mechanical ventilation & smoke extraction 4.78
system
3.9 Integrated building management system (IBMS) 0.17
3.1 Solar Power Generation Systems 2.00
3.11 Sewage Treatment Plant 0.79
Corrigendum I - 8
3.12 Public Address (PA) System 1.00
3.13 Internal Signage Systems 0.10
Tyre killer/ Spike Barrier, Boom barrier along with ANPR
3.14 0.05
& Face recogintion
a Approval of shop drawing & Technical data sheet 5.00%
(i) Supply of materials 65.00%
(ii) Erection/ Installations of materials 25.00%
(iii) Testing & Commissioning 5.00%
3.15 Airport Systems
a CCTV System 0.80
b FID System 0.70
3.16 IT Systems
a Network Active - ICT 0.50
b Server Room 0.60
c SCS- IT 0.35
Corrigendum I - 9
d IPPBX/ EPBAX System 0.45

e NOC room 0.02
3.17 AICMC of MEP Packages 1.31
3.18 AICMC of AS Packages 0.26
3.19 AICMC of IT Packages 0.34

4 LANDSCAPING WORKS 0.30
(i) Lawns 15.00%
(ii) Shrubs 15.00%
(iii) Trees 40.00%
(iv) Irrigation Systems 30.00%
5 SITE DEVELOPMENT WORKS 2.00
(i) Area Grading i/c cutting / filling of ground 15.00%
(ii) Boundary wall for Operational area 10.00%
(iii) Storm Water Drainage System 35.00%
(iv) Water Storage Tanks and Pump Room, Borewells 7.00%
(v) Utility Tunnel / Service Tunnel 30.00%
(vi) Waterproofing Works for item 5(iv) & 5(v) above 3.00%
6 LAND SIDE DEVELOPMENTS
6.1 At grade Roads 0.50
(i) Embankment/ subgrade /Sub base Course 25.00%
(ii) Base Course 10.00%
(iii) Pavement 40.00%
(iv) RE Wall 15.00%
(v) Road Furniture 10.00%
6.2 Utility Building, Plant Rooms, Pump Room, etc. 0.50
(i) Sub structure 30.00%
(ii) Super structure - Shell & Core 45.00%
(iii) Waterproofing Works (Toilet, terrace & other wet areas) 5.00%
Corrigendum I - 10
(iv) Finishing works 20.00%
Obtaining Applicable Permits, licenses and approvals set
7 forth in Schedule-E, Final Finishing and cleaning i/c 2.50
removal of all dirt & dust.
On declared complete in all aspects as per scope by the
8 1.50
competent authority.
TOTAL 100.00
Corrigendum I - 11
Schedule –D (Annex-I, Part V)
LIST OF PREFERRED MAKE
The preferred makes is listed below:
i. Listing of any make in the list do not qualify the make for use in the work. Make(s) meeting
the contract technical requirement / specifications shall only be permitted to use in work.
ii. Items which are not mentioned in above list but required at site, shall be supplied with prior
approval of AAI.
iii. In case of non‐availability of the brand specified in the contract, the Contractor shall be
allowed to use alternate equivalent brand of the material subject to submission of
documentary evidence of non ‐ availability of the preferred brand with prior approval of
TS authority. The necessary cost adjustments on account of above change shall be made
for the material.
List of Preferred Make- Civil Work
LIST OF PREFERRED MAKES

S.NO.
DESCRIPTION/ ITEM PREFERRED MAKES
ACC Ltd
Ultratech ACC Ltd.
Ambuja
Jaypee J.K. Laxmi
JK Cement
Lafarge
Birla A1 (Orient Cement Ltd.)
Emami Cement
Prism Cement
Century
1. Cement
Star Cement
PENNA
Max Cement
Ramco Cement
Chettinad Cement
Wonder
JSW Cement
Zuari Cement
Shree Cement
Dalmia Cement
Pidilite Industries Ltd
FOSROC Chemicals India Pvt. Ltd.
CICO Technologies Ltd.
Sika India Pvt. Ltd
MBCC (Formerly BASF India Ltd)
Ardex Endura (India) Pvt. Ltd.
STP Ltd.
MYK Arment Mapei
Penetron India Pvt. Ltd.
Admixtures / Water Proofing compound / Liquid Tikidan
2.
membrane /Self-adhesive membrane Kerakoll
Technonicol
Berger
Akemi
kryton buildmat co. pvt. Ltd
MC Bauchemie
Choksey chemical Pvt Ltd.
Chryso India Pvt. Ltd.
Maruti Bitumen Pvt. Ltd.
Supreme Bituchem India Pvt Ltd.
Corrigendum I - 12
Asian Paints Ltd.
IWL India Ltd.
TP Buildtech Pvt. Ltd.
ECMAS
STP Ltd.
Sika India Pvt. Ltd
MBCC (Formely BASF India Ltd)
3. Bipolar Corrosion Inhibitor Admixture
Supreme Bituchem India Pvt. Ltd.
Burger Paints
SAIL
RINL (VIZAG Steel)
TATA Steel
4. TMT Reinforcement Steel
JSW Steel
JSPL
Shyam Steel
Dextra G-Tech
5. Reinforcement coupler Hi-Tech Engineering solutions
Sanfield (India) Ltd.
Dorma India Pvt. Ltd.
Hafele India Pvt. Ltd.
GEZE GmbH
Assa Abloy
Kich Architectural Products Pvt. Ltd.
Rinox Kaufmann Lod.
Becker Fire solutions
ORB
Taiton
6. Wooden Flush Door/ Metal Fire Door/ Hardware Fitting
Q-Railing India Pvt. Ltd. (Formely D-line)
Linox Technology Pvt. Ltd.
Godrej & Boyce
LGF Sysmac India Pvt. Ltd.
Ozone India Pvt. Ltd.
Everite Define
HardynArkay
ASES Security Pvt Ltd.
Insta
Navair Ltd.
Promat International Ltd.
Shakti Hormann Pvt. Ltd.
(formerly Shakti Met Dor Ltd.)
7. Steel / Wood Fire Resistant Shutter
Sukri Paints & Chemicals
Iclean
Tata Parvesh Pacific fire control Pvt. Ltd
Signum Fire Protection
Greenlam Industries Ltd.
Merino Industries Ltd.
Century Plyboards (I) Lod.
Archidply
Greenply
ASIS
Jain Door Pvt Ltd
Laminates / Laminated Partice Board / Prelaminated
Kanchanply
Board / MDF / Ply Board /Flush Door shutter/ Flexi Ply
8. VIRGO
Stylam
National Ply
Kitply Industries
Novapan
Duro
Mayur Doors
ACTION TESA
Corrigendum I - 13
Saint Gobain Gyproc India Ltd.
USG Boral (formerly Boral Gypsum)
9. Gypsum Board Partition Armstrong World Industries (India) Pvt. Ltd.
Knauf AMF India Pvt. Ltd.
Vans Gypsum
SAIL
RINL
Structural Steel - MS Tubular Section (Circular, Square, TISCO (TATA Steel)
10. Rectangular) for Columns, Truss, MS Pipes, Flats Angles, JSW Steel Ltd.
Beams, Channels, Strips, etc. JSPL
Surya
APL Apollo Tubes Ltd
Hilti
Fischer
BOSCH
11. Fasteners
Fasteners India
MungoRawl Plug
INSTA
H&R Johnson (India) Ltd.
NITO Tiles Ltd.
Somany Tiles Ltd
Orient Bell Ltd
Kajaria Ceramics Ltd.
Asian Granito
India Ltd. (AGL)
Qutone Ceramic Pvt. Ltd.
12. Vitrified / Ceramic/ Heavy Duty Tiles NITCO Tiles
Oracle Granito Ltd.RAK Ceramics
Varmora
Oasis Vitrified Tiles
Bell Granito Ceramica Ltd.
Ambani Vitrified Pvt. Ltd.
Simpolo Vitrified Pvt. Ltd.
Pavit Ceramics Pvt. Ltd.
Pergo Ltd.
Action Tesa
Micasa
Armstrong World Industries (India) Ltd.
Egger
Kahrs
13. Wooden Laminated Flooring/ Vinyl Flooring
Epitome
ANAKON
Archidply
Unitex
Scheit
Responsive Industries Ltd.
STP Ltd.
Sika India Pvt. Ltd
MBCC (Formerly BASF India Ltd.)
FOSROC Chemicals (India) Pvt. Ltd.
Flow crete India Pvt. Ltd.
14. Epoxy /PU Flooring MYK Armet
Cipy Polyurethanes Pvt. Ltd.
NITCO Tiles Corp.
Supreme Bituchern India Pvt. Ltd.
Ardex Endura (India) Pvt. Ltd.
Tile Joint Filler, Tile /AAC Block/Stone fixing adhesive
15. Ferrouscrete India Pvt. Ltd.
/ Solid epoxy grout
MYK Laticrete
Corrigendum I - 14
Laticrete
STP Ltd.
Fairmate
Kerakoll
STP Ltd.
Sika India Pvt. Ltd
MYK Armet
16. Floor Hardener
Мареi
Ironite
Kalzip
Aluminium Standing Seam Roofing Sheet (Top &
17. Kingspan
Bottom)
Bemo System HmbH
Dan Pal
Polygal India Pvt. Ltd
Sabic (GE Plastics)
18. Poly Carbonate Sheet Gallina India Pvt. Ltd.
Tuflite
DPI Day lighting Private Limited
Lexon Coxwell Domes
Saint Gobain Gyproc India Pvt. Ltd.
Lloyd Insulations India Ltd
Armstrong World Industries (India) Ltd.
Aerolite Ceiling Systems
Dexune
ANAKON
Calcium Silicate / Mineral Fiber False ceiling Tiles /
19. Knauf AMF India Pvt. Ltd.
Gypsum False Ceiling Boards /Partition Boards
Knauf ceiling solutions (India Private
Limited)
Hilux
Gridline
Everest
Vans Gypsum
New Age False Ceiling Pvt. Ltd
Bison
Hicem
20. Fiber Cement Board / Cement Board
Everest
Visaka Industries Ltd.
Twiga
Roxul-Rockwool
Rockloyd
21. Rock wool / Glass wool Insulation
Rockwool India
Lloyd Insulations India Ltd.
Polybond Insulation Pvt. Ltd.
Durlum India Pvt. Ltd.
SAS International
Lindner AG
Saint Gobain Gyproc India Ltd.
22. Metal ceiling /Baffle ceiling Knauf AMF India Private Limited
Gordon Inc.
Dexune
Ceiflo Technologies Pvt. Ltd.
Corrigendum I - 15
Dexune
New Age False ceiling Pvt. Ltd
Limited)
Ceiflo Technologies Pvt. Ltd.
Hunter Douglas India Pvt. Ltd.
Armstrong World Industries Ltd
ANAKON
PROMINANCE
Tata Bluescope Steel Ltd.
Galvalume /Steel sheet roofing / Deck sheet over M.S.
23. Jindal Steel
structure
Dongbu Steel Co. Ltd.(Korea)
Akzo Nobel India Pvt. Ltd.
Jenson & Nicholson
Ultra Tech
Oikos India Pvt. Ltd. A
sian Paints Ltd.
Paints for steel structure (Epoxy paint) / PU Paint/Water Berger Paints
24. Proof Cement Paint/ Primer/ Distemper / Texture finish Nerolac
Paint /Synthetic Enamel Paint /Fire Retardant Paint Acro Paints Ltd.
Snowcem India Ltd.
Shalimar
Jotun
Growel (Grauer & Weil (India) Limited
FEUKEM
J.K. Cement
Toyo Ferrous crete India Pvt. Ltd.
Birla White
Dalmia Magic Premium skim coat
25. Wall Putty
Asian Paints Ltd.
NCL Buildtech Pvt. Ltd.
Burger Paints
Vexcolt International Ltd (UK)
Construction Specialites (USA)
The Supreme Industries Ltd
STP Ltd.
Hercules
Z-Tech
Deevin
Mapei
Expansion Joint/filler board/
26. Migua ASP
Joint covers
EMSEAL
Dupont
Sanfield
M.M Systems
Kantaflex-Balco
Insuboard
Soprema
Saint Gobain ADFORS
Maccaferri Environmental Solutions Ltd.
Techfab Industries Ltd.
27. Glass grid for bituminous works Giridhar Techfab Pvt. Ltd.
Terrain Infratech
Flexituff International Ltd.
Supreme Nonwoven Industries Pvt. Ltd.
Kohler Co. (USA)
Jaquar& Co. Ltd.
28. Sanitary ware / Fixtures/ Fittings
American Standard
Hindware
Corrigendum I - 16
Grohe AG (Germany)
Bobrick Washroom Equipment Inc.
Euronics
Parryware
Roca Pvt. Ltd
Franke (Switzerland)
Duravit
Marc
H&R Johnson (India) Ltd
Cera Sanitaryware Ltd.
Prayag
Saint Gobain Glass India Ltd.
Pilkington
AIS Glass Solutions Ltd
29. Glass Mirror / Glass Modi Guard
Atul Ltd.
AG by Axis Global
Glaverbel
Nirali
Jayna
30. SS Sink Franke
Prayag
Cera Sanitaryware Ltd.
Pressalit Ltd.
31. Specially-abled Fitting
Hindustan
Tata Steel Ltd.
Jindal Pipes Ltd.
Surya Roshni
APL Apollo Tubes Ltd.
32. G.I. Pipe Zenith
Utkarsh Pipes & Tubes Ltd.
Nezone Tubes Ltd.
Hi-Tech Pipes Ltd.
Jotindra Steel & Tubes Ltd.
SAIL (Salem Steel)
33. Stainless Steel sheet for cladding
Jindal
Unik
Zoloto
Leader Valves Ltd.
34. GI Pipe Fittings Surya
R-Brand
KS
SS
Sant Valves Pvt. Ltd.
Zoloto
Audco (L&T)
Sluice Valve / PressureReducing valve / Non-Returnvalve Castle
35.
(CI / Gun Metal) Leader Valves Ltd.
Kartar
Honeywell
IVC
The Supreme Industries Ltd.
Finolex Industries Ltd.
Savoir faire Manufacturing Co. Ltd.
AKG
Surya Roshni
36. UPVC /CPVC Pipes & Fittings
Astral
Prince
Ori-plast
Ashirvad
Vectus
Corrigendum I - 17
Prayag
Belco
Ajay
SANGIR
37. Soil Waste & Vent Pipes & Fittings and Water Supply Pipes
NECO
BIC
RIF
Sand Cast Iron S&S/ Centrifugally Cast (Spun) S&S/ Electro Steel Castings Ltd.
a)
Hubless Centrifugally CastSpun Iron Pipe SKF
Kapilansh
Saint Gobain
Heepco
Kesoram
Electro Steel Castings Ltd.
NECO
b) Centrifugally (Spun) CIPipes Class 'LA' / Ductile IronPipe BIC
TATA
RIF
SAIL
NECO
BIC
RIF
Electro Steel Castings Ltd.
38. CI Manhole Covers &CI Grating SKF
Kesoram
Kapilansh
Kartar
Heepco
Geberit
Saint Gobain
Savoir faire Manufacturing Co. Ltd.
Jain Irrigation
39. HDPE Pipes
Ori-plast
East Hooghly Agro Plantation Pvt. Ltd.
Ajay
SANGIR
Alucobond (3A Composites India Pvt. Ltd.)
Reynobond (France)
Alutuff
Euro Panel products ltd.
Wonder ACP
40. Honeycomb Composite Panels
Alstone
Aludecor Lamination Pvt. Ltd. Viva
Limited)
Hunter Douglas
Dow Coning
Sika India Pvt. Ltd
41. Structural/Weather Sealant for structural glazing /ACP
Bulwash
Kingston
Wacker
Dow Corning
MBCC (Formerly BASF India Ltd).
42. Silicone sealant
STP Ltd.
Rawl Plug
Choksey Chemicals Pvt. Ltd.
G.E Plastics
Supreme Bituchem India Pvt.
Corrigendum I - 18
Kingston
Burger paints
Hindalco Industries ltd.
Jindal Aluminium Ltd.
43. Aluminium Extrusions/structural members Bhoruka
NALCO
KMC Bangalore
Choksey Chemicals Pvt. Ltd.
Pidilite Industries Ltd Sika India Pvt. Ltd
Dow Corning
Laticrete
STP Ltd.
44. Polysulphide Sealant for Joints
Tuffseal Wacker
G.E
Supreme Bituchem India Pvt. Ltd
Kingston
Burger Paints
AIS Glass Solutions Ltd.
Pilkington
Modi Guard
45. Float Glass
Guardian (USA)
Emirates Glass LLc
Glaverbel
Gold Plus
Pilkington
Guardian (USA)
AIS Glass Solutions Ltd.
46. High Performance Glass
Modi Guard
Emirates Glass LLc
Glaverbel
Gold Plus
Jindal Architecture Ltd.
GEZE GmbH
Q-Railing India Pvt. Ltd. (formerly D-Line)
ORB
Kich Architectural Products Put. Ltd.
47. Modular S.S./Glass Railing Rinox Kaufmann Ltd.
Taiton
Linox Technology Pvt. Ltd.
Ozone India Pvt. Ltd.
Assa Abloy
Greenlam
Merino Industries Ltd
SOMO Tech.
STYLAM
ACTION TESA
Fundermax
48. High pressure laminate/ Toilet Cubical /Urinal partitions
Green Sturdo
Trespa
T- Line
Bobrick Washroom Equipment Inc.
Virgo
Corrigendum I - 19
Dupont
LG-Himacs
Hanex
Samsung Staron
49. Solid Acrylic Surface boards
DURLAX
Stylam Granex
Neonnex
GMGR India
Mehler Texnologies India Pvt ltd.
50. Tensile Fabric Serge Ferrari India Pvt Ltd.
Sattler PRO-TEX
Magicrete Building Solutions
Finecrete Eco-Blocks Pvt. Ltd.
Aerocon
Bilt Technologies Ltd.
JK
Insta block Max Blocks
51. Autoclaved Aerated Cement(AAC) Blocks
RS Green Infra (India) Pvt. Ltd.
Siporex
Kataria Ecotech. Pvt. Ltd.
Krrish White Bricks LLP
Jindal AIR
NCL Buildtech Pvt. Ltd.
Hafele India Pvt. Ltd.
GEZE GmbH
Rinox Kaufmann Ltd.
ORB
52. Automatic Revolving /Sliding/Swing Door
Assa Abloy
Gilgen Door Systems AG
Linox Technology Pvt Ltd.
Autoingers
INSTA34
WULMET
Latchways
Capital Safety
Honeywell
Kingspan
53. Walkways /Fall Protection system
Kartosar
Safety Link Pvt
Checkmate
Kalzip
Karam
NYSTROM
BABENKO
54. Roof Hatch BILCO
KINGSPAN
Checkmate
Okotech
Finesta
Aparna Venster
55. UPVC Doors & Windows Aluplast
NCL Veka
PABROS
PROMINANCE
Ferrouscrete India Pvt. Ltd.
Ultra Tech
Saint Gobain Gyproc India Pvt. Ltd.
56. Gypsum plaster /Polymer modified self-curing mortar
Dow Construction Chemicals
Asian Paints Ltd.
Corrigendum I - 20
BULWASH
Burger Paints
3M
Avery Dennison
57. Decorative Films /Safety Films
Paperlam
Deck
Fore Solutions Pvt. Ltd.
58. Steel Nano Coat Meta-Chem Paints and adhesives Pvt. Ltd.
Advanced Lab
Jotun
Akzonobel paint
59. Intumescent paint Berger Paints
Asian Paints
Alucobond (3A Composites India Pvt. Ltd.)
Alpolic
Reynobond (France)
Aludecor Lamination Pvt. Ltd.
Alstone
Alutuff
Euro Panel products ltd.
VIRGO
Wonder ACP
60. Aluminum Composite Panels (ACP)
Reynoarch
Reynobond
Alubond DACS India Pvt. Ltd.
Viva
Alutech
Alstrong Enterprises India
Durabuild Technologies Pvt. Ltd.
Alcomax-Dongshin Engg Corpn. (South
Korea)
MBCC (Formely BASF India)
Flowcrete
MYK Arment
61. Epoxy Terrazo Floor
ULFCAR
NITCO Tiles
Euronics
Bobric
62. Modular Matting
3M
Construction Specialities
Greenlam
Fundermax
63. High Pressure Laminate
Merino
Stylam
VMZINC
Silecia
NEDZINK
64. Zinc Cladding/ Bull nose/ Bulkhead
ZINTEK
Kinzok
Alstone
Saint Gobain
65. Digital Printed/Lacquered Glass AIS
AG by Axis Global
Unistone
Dalal Tiles
66. FRP/GRC/GFRC AL TASNIM Enterprises Ltd
Birla
Everest
Corrigendum I - 21
Bobric
67. Baby Changing Station
Euronics
Bobric
68. Paper Napkin Dispensor
Euronics
Clayton
Hunter Douglas NBK
69. Terracotta Savarock
Moeding
Anakon
INSTA
Otic
Jeb
70. Glass Partition and fiitings
Alloy
Bene
Kubik
Geze
Dorma
ORB
71. Glass Door Patch Fittings
Rinox kaufmann ltd
Assa Abloy
INSTA
Appletree
72. Façade BMU
Clean India
Zisco Industries Pvt. Ltd
Alutuff
Wonder ACP
Mini Sign
D Line
73. Signages
S S Industries
Allsee
VIRGO
Ingenious Solution Group
VDIS
J Press
Viega
Insta Pressfit
74. SS Pipe Primegold
Geberit
Platinox
VICTAULLIC
Blick
VS1
75. Vertical Glazing System (Airside and CitySide)
Schuco
Façade One
Forbo
Armstrong
76. Flotex Flocked Tiles
Floor Master
Bentley
Verde
77. Moss Wall
Nordgrona
Orvi
78. Metal Inlay Stonecraft
World of Stones
Corrigendum I - 22
LIST OF PREFFERED MAKES FOR ELECTRICAL WORKS
CATEGORY
OF TEST
S. NO ITEMS PREFFERED MAKES CERTIFICATE
/
INSPECTION
A. PANEL,SWITCHGEARS AND RELATED ITEMS:
EAP/ TRICOLITE/ SUDHIR/ L&T/ ADLEC/ LEGRAND/
ABB/ C&S/ SIEMENS/ NEPTUNE/ MEpowerR/
SCHNEIDER/ RITTAL/ RR ISPAT/ ADVANCE/ KEPL/
PEATON / RISHA/ STERLING GENERATORS/ HAROLD/
LT PANELS (TTA)
1 NITYA / TRISQUARE/ SPC ELECTROTECH /BCH/ CATEGORY - 1
(FOR INCOMER ABOVE 250 AMPs)
MILESTONE / GEPOWER (SPECTRA)*/ UNILEC* /
JACKSON* / GODREJ* / INCOTECH* subject to
having valid CPRI/ ERDA Certificate of required Fault
Level & IP Level protection.
EAP/ TRICOLITE/ SUDHIR/ L&T/ ADLEC/ C&S/
SIEMENS/ NEPTUNE/ PYROTECH/ MEpowerR/
SCHNEIDER/ HENSEL/ ENGINEERS & ENGINEERS/
ADVANCE/ KEPL/ PEATON/ RISHA / STERLING
GENERATORS/ HAROLD / NITYA/ TRISQUARE/ CMKL/
LT PANELS (PTTA) SPC ELECTROTECH /BCH/ MILESTONE / GODREJ /
2 (FOR INCOMER UP TO & BELOW 250 GEPOWER (SPECTRA)*/ UNILEC* / JACKSON* / CATEGORY - 1
AMPs) INCOTECH* subject to having valid CPRI/ ERDA
Certificate of required Fault Level & IP Level
protection.
DIGIDRIVES/ AMBIT/ ELINS/ JAKSON/ ZENIYA/ EVA &

ALL MAKES IN CAT-A
L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/ HAVELLS/

3 AIR CIRCUIT BREAKERS SCHNEIDER/ GE POWER* CATEGORY - 2
CHINT & ALL MAKES IN CAT-A
L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/ ANDREW YULE/

HAVELLS/ SCHNEIDER / BENLO / INDO ASIAN / HPL /
MOULDED CASE CIRCUIT BREAKERS GE POWER*
4 CATEGORY - 2
(MCCB)
CHINT/ GE POWER*/ STANDARD */ BCH* & ALL
MAKES IN CAT-A
CHANGE OVER SWITCH/ FUSE SOCOMEC/ L&T/ LEGRAND/ C&S/ SIEMENS/ BENLO /
5 DISCONNECTOR SWITCH/ SWITCH HPL / HH ELCON* / INDO ASIAN*/ HAVELLS* / GE CATEGORY - 2
FUSE UNITS POWER* / ABB* / STANDARD* / SCHNEIDER*
MEGGER/ FINDER/ RISHABH/ L&T/ SIEMENS/
AMMETER/ VOLTMETER/ KWH/ KWAH/ NEPTUNE/ SCHNEIDER/ SOCOMEC / BENLO/ HPL /
PF/ FREQUENCY METER/DIGITAL AE*/ MECO* / IMP*/ UNIVERSAL* / TRINTY* /
6 CATEGORY - 3
INTELLIGENT MULTI FUNCTIONAL BHEL*/ ELMEASURE* / CONSERVE* / HPK*/
METER/ TRIVECTOR METER HAVELLS*/ SIMCO* / JAIPUR METERS*/ INDIA
METER* /AREVA*/ MOTWANI* / SECCURE*/ SUNCO*
L&T/ C&S/ SIEMENS / EATON / BCH / KAY CEE* / GE
SELECTOR SWITCH, PUSH BUTTON POWER* / SCHENIDER* / ROCKWELL (ALLEN
7 BRADELY)*/ TEKNIC* CATEGORY - 4
SWITCH / EMERGENCY SWITCH
HENSEL/ HAGER & ALL MAKES IN CAT-A
MEGAWIN/ SELEC/ NEWTEK ELECTRICALS/ AE* /

KAPPA* / UNIVERSAL* / KAYCEE* / IMP*/ C&S* /
8 CT’s / PT's CATEGORY - 3
L&T*/ MECO*/ KAPCO* /CROMPTON GREAVES*
/PRAGATI* /INSTRANS*
Corrigendum I - 23
ANANT POWER/ HAGER & ALL MAKES IN CAT-A
CG POWER (CGPSL) / L&T/ C&S/ SIEMENS/

9 PROTECTIVE RELAYS (ALL TYPE) MEGAWIN/ AREVA* / ABB* / EASUN REYROLLE* CATEGORY -2
ALL MAKES IN CAT-A
L&T/ LEGRAND/ ABB/ TDK(EPCOS) / C&S/ SIEMENS/

ANDREW YULE/ HAVELLS/ SCHNEIDER/ GE POWER* /
10 CONTACTORS BCH* / TC* CATEGORY - 3
FINDER/ L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/

SELEC/ BCH / INDO ASIAN*/ SCHNEIDER* / ADVANI
11 TIMERS/ TIME SWITCH ORLIKON* / GE* CATEGORY - 3
HAGER & ALL MAKES IN CAT-A
L & T/ GE POWER / SIEMENS / ABB / C&S/ INDO

12 HRC FUSES CATEGORY - 4
ASIAN/ HAVELLS/ STANDARD
C&S / AE* / VINAY LED* / EASUN* / CONCORD* /
KAY CEE*/ SIEMENS* / VAISHNOV* / L&T*/
SCHENIDER*/ ROCKWELL* (ALLEN BRADLEY) /
13 LED INDICATION LAMPS PREFIFINE* / BCH* (T.S. Authority may add makes CATEGORY - 3
considering the local availability and quality. The
approved OEM of HT/LT Panel manufacturer).
B. SUBSTATION RELATED ITEMS.

SUDHIR/ ABB/ ANDREW YULE/ SCHNEIDER/
TRANSFORMER UP TO 500 KVA KOTSONS/ VOLTAMP/ CG POWER (CGPISL)/ AREVA* /
14 CATEGORY - 1
(DRY/OIL) KIRLOSKAR* / INDO TECH* / BHARAT BIJLEE*/
TELK*/ BHEL*
SUDHIR/ ABB/ ANDREW YULE/ SCHNEIDER/
TRANSFORMER MORE THAN 500 KVA
15 KOTSONS/ VOLTAMP/ CG POWER (CGPISL) / AREVA*/ CATEGORY - 1
(DRY/OIL)
KIRLOSKAR* / SIEMENS* / BHARAT BIJLEE*/ BHEL*
EAP / CG POWER (CGPISL)/ TRICOLITE/ SUDHIR/
L&T/ ADLEC/ ABB/ C&S/ NITYA/ PSI/ TRISQUARE /
ANDREW YULE/ MEGAWIN/ MEpowerR/ SCHNEIDER/
16 H T PANEL MILESTONE/ EATON/ ADVANCE/ STERLING CATEGORY - 1
GENERATORS/ MEI* / SOUTHERN SWITCH GEARS* /
BIECO LAWRIE* / NGEF*/ JYOTI*/ KIRLOSKER* /
AREVA* / SIE*/ SIEMENS*/ BHEL*
EAP/ L&T/ LEGRAND/ C&S/ RR KABEL/ EAE/
SCHNEIDER/ GODREJ / POWER DUCTS (TRICOLITE)*
17 SANDWICH BUS DUCT CATEGORY - 2
/ MOELLAR (Imported)* / HONIKOWN (Imported)* /
GE POWER*
H.T /L.T.TERMINATION & JOINTING ANDREW YULE/ COMPAQ / RAY CHEM* / M-SEAL* /
18 CATEGORY - 3
KIT. CAB SEAL* / DENSON* / MAHINDRA*/ BIRLA-3M*
CRYSTAL/ KEI/ WORLDCAB/ RAVIN/ DYNAMIC/
RHINO/ CMI/ POLYCAB/ UNICAB/ AVOCAB/
GEMSCAB/ HAVELLS/ GLOSTER / UNIVERSAL* (Satna)
19 POWER CABLES ABOVE 1.1 KV / CCI* (Bangalore) / RPG* (ASIAN) (Mumbai) / CATEGORY - 1
TORRENT* (Nadiad) I NICCO* (Shyam Nagar, WB) /
ICL* (Rajpura) / FINOLEX* (Pune)/ INDUSTRIAL
CABLES* (Rajpura)
CRYSTAL/ RALLISON/ KEI / WORLDCAB/ RAVIN/
DELTON/ DYNAMIC/ RHINO/ CMI/ POLYCAB/ UNICAB/
POWER CABLES UP TO AND INCLUDING
20 AVOCAB/ RR KABEL/ GEMSCAB/ HAVELLS/ BONTON/ CATEGORY - 1
1.1 KV
CORDS/ GLOSTER / CCI* (Bangalore) / NICCO*
(Shyam Nagar, WB) / UNIVERSAL* (Satna) / RPG*
Corrigendum I - 24
(ASIAN) (Mumbai) / INDUSTRIAL CABLES* (Rajpura) /
TORRENT* (Nadiad) /HINDUSTAN VIDYUT PRODUCT
LTD* (Faridabad) / FINOLEX* (Pune) / EKTA* (New
Delhi)/ SKYTONE* (Faridabad)
CRYSTAL/ RALLISON/ KEI/ WORLDCAB/ RAVIN/
DELTON/ TAMRA/ FINECAB/ DYNAMIC/ RHINO/ CMI/
POLYCAB/ UNICAB/ AVOCAB/ RR KABEL / GEMSCAB/
HAVELLS/ BATRA/ CORDS/ GLOSTER /CCI*
(Bangalore) / NICCO* (Shyam Nagar WB) /
21 CONTROL CABLES UNIVERSAL* (Satna) / RPG* (ASIAN) (Mumbai) / CATEGORY - 1
TORRENT* (Nadiad) / FINOLEX* (Pune)/
/HINDUSTAN VIDYUT PRODUCT LTD* (HVP)
(Faridabad) / LAPP*/ ALOKE* (ANKUR TECHNOCRAT)
/* (Ahmedabad) / EKTA* (New Delhi) /SKYTONE*
(Faridabad)
RALLISON/ DELTON/ CMI/ POLYCAB/ RR KABEL/
22 TELEPHONE CABLE CATEGORY - 2
SKYTONE*/ NATIONAL* / NICCO*.
RALLISON/ DELTON/ RHINO/ CMI/ POLYCAB/
LEGRAND/ UNICAB/ AVOCAB/ RR KABEL/ GEMSCAB/
CO- AXIAL/ INSTRUMENTATION/ FIBER
23 CORDS/ SCHNEIDER / BHANSALI* / SKYTONE* / CATEGORY - 2
OPTIC/ CAT-6 CABLES
RPG* /UNIVERSAL*/ UNIFLEX*/ AMP*/ AVAYA* /
METRO*/ SKYLINE*/ DELTRON*
MEM/ L&T/ LEGRAND / RMCON/ BEC/ RR ISPAT/
RATAN'S/ STERLING DURO/OBO BETTERMANN/
CABLE MANAGEMENT SYSTEM (PRE
PILCO* / INDIANA* / VENUS* / STEELITE* /
24 FABRICATED CABLE TRAY/ WIRE MESH CATEGORY - 3
SADHANA ENG* / TECHNAD ENG.*/ MM ENGG.*/
SYSTEM ETC.)
POWER CAB* / NEPTUNE*/ RICO STEEL* / PROFAB
ENGG.*/ SLOTCO*
SHREEM/ L&T/ LEGRAND/ ABB/ TDK(EPCOS)/
25 CAPACITORS NEPTUNE/ SCHNEIDER / GE POWER* / VOLTAS* / CATEGORY - 2
BHEL* / KHATAU ZANKAR* / USHA* / MATRIX*
EAP/ TRICOLITE/ SHREEM/ L&T/ ADLEC/ LEGRAND/
26 APFC PANEL EPCOS/ C&S/ NEPTUNE/ SCHNEIDER CATEGORY - 1
AMBIT & ALL MAKES IN CAT-A
ABB/ DEHN/ TERCEL/ERICO*/ PHEONIX*/ INDELEC*/

27 LIGHTENING PROTECTION SYSTEM CATEGORY - 3
DUVAL MASSIAN* / FRANKLIN*
EARTHING SYSTEM (DIGITAL/ JMV/ RATAN'S/ CAPE/ APS/ PROTEC-DHRUVA/ OBO
28 CATEGORY - 3
CHEMICAL/ PORTABLE EARTHING) BETTERMANN
FINDER/ L&T/ LEGRAND/ DEHN/TERCEL / JMV/
MERSEN/ CAPE/ EATON/ PHOENIX CONTACT/ OBO
29 SURGE PROTECTION DEVICES BETTERMANN CATEGORY - 3
ALLIED/ PROTEC/ SECOM/ ITE/ CITEL & ALL MAKES
IN CAT-A
ABB/ SIEMENS/ SCHNEIDER /ALLEN BRADELY*/ GE

SCADA (Hradware & Software, Except
30 FANUC*/ JOHNSON CONTROLS* (METASYS MS )/ CATEGORY - 2
Computer & Accessories)
LALNDIS & STEAEFA / HONEYWELL*
L&T/ ABB/ C&S /BHEL* / CROMPTON GREAVES* /
31 SF6 CIRCUIT BREAKER CATEGORY - 2
KIRLOSKER* / SIEMENS* / SCHNEIDER*
CG POWER/ L&T/ ABB/ C&S/ ANDREW YULE/
32 VACUUM CIRCUIT BREAKER MEGAWIN/ SCHNEIDER/ SIEMENS* CATEGORY - 2
CONSUL NEOWATT/ ANDREW YULE

33 SERVO STABLIZER CATEGORY - 2
P2 POWER & ALL MAKES IN CAT-A
Corrigendum I - 25
SOCOMEC/ L&T/ LEGRAND/ ABB/ HAVELLS/ ASCO
34 AUTO TRANSFER SWITCH (SCHNEIDER) CATEGORY - 2
HAGER/ ALL MAKES IN CAT-A
35 COMPACT SUB STATION L&T/ ABB/ C&S/ SCHNEIDER CATEGORY - 1

36 EMERGENCY LIGHT - LED (PORTABLE). ABB/ LIFE-GUARD/ PROLITE/ BPL* / SANYO* CATEGORY - 3
COMET / DOWELL / ELECTROMAC / SIEMENS /
37 CABLES GLANDS CATEGORY - 3
BRACO / HMI / MCI / (METAL / CRAFT)
38 LUGS & THIMBLES DOWELLS / JOHNSONS/ COMET/ ASCON CATEGORY - 4
39 SYNTHETIC INSULATING MATS CPRI certified for required voltage level. CATEGORY -2
JMV/ CAPE/ APS/ PROTEC-DHRUVA/ OBO
BETTERMANN/ LAMCO* / ELARO* / ATLAS* /
40 LIGHTNING ARRAESTORS CATEGORY - 2
INTERNATIONAL*/ AREVA* / OBLUM* / ALPRO* / WS
IND*./ JAIPURIA* / JAYSHREE*
41 INSULATION TAPE (HT / LT) BENLO/ ANCHOR / BCH CATEGORY - 4
C DG SETS & RELATED ITEMS
CUMMINS/ KOEL /CATERPILLAR/ MAHINDRA/
42 DIESEL ENGINE ABOVE 250 KVA . PERKINS/ GREAVES COTTON / ASHOK LEYLAND- CATEGORY - I
BAUDOUIN / MTU* / VOLVO PENTA*
CUMMINS / KOEL/ CATERPILLAR/ MAHINDRA/ ASHOK
DIESEL ENGINE UPTO AND INCLUDING
43 LEYLAND / GREAVES COTTON / MTU* / VOLVO CATEGORY - I
250 KVA
PENTA*
KIRLOSKAR/ LEROY-SOMER/ STAMFORD/ CROMPTON
44 ALTERNATOR CATEGORY - 1
GREAVES /JYOTI* / NGEF*/ KEL*
KIRLOSKAR/ EXIDE* / AMCO* / PRESTOLITE* /
45 BATTERIES AMARON* / GENPRO* / STANDARD FURUKAWA* / CATEGORY - 3
LUCAS* / HBL NIFE*
46 BATTERY CHARGER VERTIV / DELTA CATEGORY - 2
MICROTEK/ SOCOMEC/ GREEN / NUMERIC/ RIELLO/
AUTOMETERS/ CONSUL NEOWATT/ ABB/ SCHNEIDER
47 UPS - ABOVE 10 KVA / VERTIV (EMERSON) / APC*/ DBPOWER* CATEGORY - 3
EATON / ALL MAKES IN CAT-A
MICROTEK/ POWER-ONE/ SOCOMEC/ GREEN /

NUMERIC/ SCHNEIDER / VERTIV (EMERSON) /
48 UPS - UPTO 10 KVA DBPOWER* / APC* CATEGORY - 3
DELTA / EATON & ALL MAKES IN CAT-A
D INTERNAL WIRING RELATED TEAMS

L&T / INDO ASIAN/ C&S/ LEGRAND / HPL/ BENLO/
ANCHOR / EATON/ GM/ ABB/ MK HONEYWELL/
MCB/ ISOLATOR/ MCBDB/ RCCB/ RCBO/ POLYCAB/ MITSUBISHI/ BCH/ SIEMENS* / CATEGORY - 2
49
ELCB SCHNEIDER* / STANDARD* / HAVELLS* / GE*
HAGER/ ALL MAKES IN CAT-A CATEGORY - 2
RMCON/ BEC/ SUPER

50 MS CONDUIT CATEGORY - 3
JPC PIPES & ALL MAKES IN CAT-A
BEC/ AKG/ ANCHOR/ GM/ POLYPACK*/ PRECISION*/

51 PVC CONDUIT MIHIR* CATEGORY - 3
JPC PIPES & ALL MAKES IN CAT-A
INDUSTRIAL SOCKET IN SHEET STEEL C&S/ LEGRAND/ HPL/ NEPTUNE- BALS/ BCH/ INDO
52 CATEGORY - 4
ENCLOSURE WITH MCB ASIAN*/ CROMPTION*/ SCHNEIDER*/ HAVELLS*
Corrigendum I - 26
HAGER/ ALL MAKES IN CAT-A
KEI/ PARAMOUNT/ BONTON/ RAJNI GANDHA/ CMI/

ANCHOR / MESCAB/ ALOKE/ GOLD MEDAL/ APAR/
GRANDLAY/ GM/ RALLISION/ BATRA HENLAY/
ZENIUM/ RR KABEL/ BHANSALI/ GLOSTER/ NATCAB/
53 PVC INSULATED COPPER WIRE PARAGON/ BCH/ SKYLINE*/ PLAZA/ V GUARD*/ CATEGORY - 2
FINOLEX* / HAVELLS*/ INDO ASIAN*/ CRYATAL*/
POLYCAB*/ KDK EVERSHINE*/ FINECAB*/ CAPCAB*/
STANDARD*
GALAXY CONCAB & ALL MAKES IN CAT-A
BENLO/ INDO ASIAN/ C&S/ SIMON/ ANCHOR/ L&T/

SWITCHS/ SOCKETS/ TELEPHONE/ TV/ GOLD MEDAL/ LEGRAND/ GM/ HPL/ ABB/ MK
54 DATA SOCKET/ BOXES (MODULAR/ HONEYWELL/ POLYCAB/ BCH / SSKAY* / HAVELLS*/ CATEGORY - 3
PIANO TYPE) NORTH WEST* / CLIPSAL*/ WESTERN VEGA*
E FIRE ALARM EQUIPMENTS.

APOLLO/ EDWARDS (UTC)/ SIEMENS/ BOSCH/
NOTIFIRE/ TYCO SIMPLEX/ G + M SCHRACK/
55 FIRE / SMOKE DETECTOR HONEYWELL/ SYSTEM SENSOR*/ MORLEY IAS* CATEGORY - 2
KIDDE (UTC)/ GST (UTC) & ALL MAKES IN CAT-A
APOLLO/ AUTRONICA (UTC)/ EDWARDS (UTC)/

SIEMENS/ BOSCH/ NOTIFIRE /TYCO SIMPLEX/ G + M
FIRE ALARM PANEL / SCHRACK/ HONEYWELL/SYSTEM SENSOR*/ MORLEY
56 CATEGORY - 2
REPEATER PANEL IAS*/ GROUP4 */ MATHER & PLATT*/ MINIMAX*
KIDDE (UTC)/ GST (UTC) & ALL MAKES IN CAT-A
APOLLO/ EDWARDS (UTC)/ SIEMENS/ BOSCH/

NOTIFIRE / TYCO SIMPLEX/ G + M SCHRACK/
HOOTER / MANUAL CALL POINT / HONEYWELL/ MORLEY IAS */ SYSTEM SENSOR* /
57 CATEGORY - 2
RESPONSE INDICATOR GROUP4* / MINIMAX*
GST (UTC) & ALL MAKES IN CAT-A
APOLLO/ SIEMENS/ BOSCH/ TYCO SIMPLEX/ G + M

58 PA SYSTEM FOR FIRE ALARM SYSTEM SCHRACK/ HONEYWELL/ AHUJA*/ PHILIPS*/ CATEGORY -3
MOTWANE*
CMI/ KEI/ BONTON/ POLYCAB/ BATRA HENLAY/ RR
59 FIRE SURVIVAL CABLE KABLE/ WREXHAM CATEGORY - 2
FUSION POLYMER & ALL MAKES IN CAT-A
60 FIRE ESCAPE / EXIT SIGNAGES LIFE-GUARD/ PROLITE/ DELITE CATEGORY -3

F LED LIGHT FIXTURE AND FANS
TERMINAL/ ANCILLARY/ RESIDENTIAL
61 AS PER SPECIFICATION CATEGORY - 2
BUILDING / OUTDOOR AND OTHERS
AVIATION WARNING LIGHT
62 /OBSTRUCTION LIGHT (LOW /MEDIUM/ MANUFACTURERS WHO MEET ICAO REQUIREMENTS CATEGORY - 3
HIGH INTENSITY)
PHILLIPS/ GE/ BAJAJ/ OSRAM/ WIPRO/ CROMPTON/
THORN/ SCHREDER/ REGENT/ REGGIANI/ TRILUX/
63 LAMPS FOR FITTING (NON - LED) CATEGORY - 4
GEWISS/ REGIOLUX/ AEOC/ LIGHT(DURLU M)/ C&S
GROUP/ SOLAR/ HAVELLS/ HALONIX/ ORTON/ SURYA
ANCHOR/ HALONIX/ GM/ RR/ ORIENT* / GEC*
64 CEILING/ WALL FAN /POLAR* /USHA* / CROMPTON* / BAJAJ* / KHAITAN* CATEGORY - 2
/ ALMONARD*/ HAVELLS*
Corrigendum I - 27
ANCHOR / HALONIX/ GM/ RR/ GEC* /CROMPTON* /
65 EXHAUST/ FRESH AIR FAN CATEGORY - 2
KHAITAN* / ALMONARD*/ BAJAJ*
G AIRCONDITIONING AND FIRE FIGHTING ACCESSORIES.
PRAKASH SURYA/ ITL-INDUS/ BEC/ RR ISPAT/ JINDAL
66 G I / M S PIPES CATEGORY - 2
STAR/ TATA* /HSL*/ SAIL*
ZOLOTO/ CRANE / JOHNSON CONTROL / DANFOSS/
VTM/ EMERALD/ ADVANCE / CASTLE / SANT /
VALVES (BUTTERFLY/ SLUICE/ CHECK/ KIRLOSKAR* / LEADER* / KILBURN*/ AUDCO*/
67 CATEGORY - 2
NRV/ FOOT/ GATE/ GLOBE ETC.) SARKAR* /DIVINE* / C&R*
VENUS & ALL MAKES IN CAT-A
68 SUCTION / POT / Y- STRAINER VTM/ ANERGY/ EMERALD / SANT / LEADER* CATEGORY - 2

SPRINKLER / FLEXIBLE CONNECTION LIFE-GUARD/ EXFLAME/ SAFEFIRE/ TYCO /
69 CATEGORY - 2
FOR SPRINKLER AQUAMIST/ NEWAGE/ SPRAY SAFE* / HD*
FIRESHIELD/ LIFE-GUARD/ SWASTIK/ SHOOTFIRE/
FIRE HYDRANT LANDING VALVES/ FIRE EXFLAME/ SAFEFIRE/ TYCO/ NEWAGE / MINIMAX* /
70 SAFEX* / VIJAY* / SAFE GUARD* CATEGORY -2
BRIGADE CONNECTION.
71 INSTALLATION VALVE (ISI MARKED) LIFE-GUARD/ TYCO/ SPRAY SAFE*/ HD* CATEGORY - 3
FIRE HOSE PIPES/ FIRST AID HOSE
72 EXFLAME/ SAFEFIRE/ CHEMGAURD/ SKUM / NEWAGE CATEGORY - 2
REEL
/ MINIMAX* / SAFEX*
BRANCH PIPE, NOZZLE AND EXFLAME/ SAFEFIRE/ TYCO/ ANSUL/ GRINELL/
73 NEWAGE / MINIMAX* / SAFEX* CATEGORY - 2
COUPLINGS
KANEX/ FIRESHIELD/ LIFE-GUARD/ SUPREMEX/

SWASTIK/ SHOOTFIRE/ EXFLAME/ SAFEFIRE/
74 FIRE EXTINGUISHERS CATEGORY - 2
ANSUL/ SKUM/ CHEMGAURD / MINIMAX* / SAFEX* /
SAFEGUARD*
LIFE-GUARD/ SUPREMEX/ SHOOTFIRE/ ANSUL/ LPG/
75 FIRE SUPPRESSION SYSTEM HYGOOD CATEGORY - 2
FOAMTECH / FIRETREX & ALL MAKES IN CAT-A
MAHINDRA/ CATERPILLAR/ ASHOK LEYLAND* /

DIESEL ENGINE DRIVEN PUMP FOR KIRLOSKAR OIL*
76 CATEGORY - 2
FIRE FIGHTING
GRUNDFOS & ALL MAKES IN CAT-A
GRUNDFOS/ ANDRITZ/ XYLEM/ AQUA _ANS/ KSB /

KIRLOSKAR* / BEACONS* / MATHER & PLATT* /
PUMPS/ SUBMERSIBLE/ SEWAGE
77 CROMPTON* / WASP*/ JYOTI* / BE */ VOLTAS* CATEGORY - 2
PUMPS (VERTICAL/ HORIZONTAL)
/GREAVES* / AMRUT*/ PEC*/ SUGUNA*/
CALAMA*(for Pumps Only)
BHARAT BIJLEE/ GRUNDFOS/ BCH/ KIROLSKAR* /
78 MOTORS ALSTOM* / SIEMENS* / JYOTHI* / ABB* / CATEGORY - 2
CROMPTON* / NGEF*
ABB/ C&S/ SIEMENS/ SCHNEIDER/ L&T/ BENLO/
GRUNDFOS/ PHOENIX CONTACT/ BCH/ EATON/
79 MOTOR/ PUMP STARTER CUTLER HAMMER* / GE POWER* / ABS* CATEGORY - 2
VIDHYUT CONTROL/ MOTOVARIO & ALL MAKES IN
CAT-A
SINGLE PHASING PREVENTOR/ OVER SELEC/ BCH/ L&T* / GE POWER* / SIEMENS* /

80 CATEGORY -3
LOAD PROTECTION UNIT MINILEC* / ABB*
Corrigendum I - 28
HAGER / ALL MAKES IN CAT-A
81 PRESSURE SWITCH DANFOSS/ EMERALD/ SWIZER* CATEGORY - 2

82 G I SHEETS. RUSKIN TITUS/ JINDAL / TATA* / HSL* / SAIL* CATEGORY - 2
RUSKIN TITUS/ CARYAIRE/ MAPRO/ GREENHECK/
CRYSTAL/ AIRMASTER*/ VINAYAGA*
83 GRILLS /DIFFUSERS. /CORPORATION* / AJANTA* / RAVI STAR* CATEGORY - 3
TRISTAR/ CONAIRE/ CARYAIRE & ALL MAKES IN CAT-
A
INSULATION MATERIAL TWIGA / ARMAFLEX / ALP AEROFLEX / K-FLEX /

(a) Rock Wool/ Glass Wool / Nitrile LLOYDS/ INSUFLEX/ PILKINGTON*/ BEARDSELL* CATEGORY - 3
Rubber PARAMOUNT & ALL MAKES IN CAT-A
84
TROCELLEN/ ALP AEROFLEX/ INSUFLEX / K-FLEX
(b) XLPE/EPDM CATEGORY - 3
PARAMOUNT & ALL MAKES IN CAT-A
ROLASTAR/ DUCTOFEB/ ADVANCE/ WAVES/ ZECO

85 PRE-FABRICATED GI DUCT CATEGORY - 3
REFROTECH & ALL MAKES IN CAT-A
MAPRO/ GREENHECK / RUSKIN / CARYAIRE

86 FIRE DAMPERS CATEGORY - 2
TRISTAR/ CONAIRE & ALL MAKES IN CAT-A
MITZVAH/ TECHNOCRAT/ ALMONARD* / BECON* /

87 AIR CURTAINS. CATEGORY - 2
TECHNOMECH* / RUSSEL* / AERODYNAMICS*
ANERGY/ SIEMENS/ GRUNDFOS/
HONEYWELL*/JOHNSON */STEFA CONTROL* /RAPID CATEGORY - 2
88 MODULATING MOTOR COOL*
CONAIRE & ALL MAKES IN CAT-A
DANFOSS/ VTM / ANERGY/ SIEMENS/ CASTLE /

MODULATING/ SOLENOID/ BALANCING
89 SANT/ ADVANCE/ AZBIL/ JOHNSON CONTROL* / CATEGORY - 2
VALVE FOR AHU
RAPID COOL* / HONEYWELL*
90 REFRIGERENT VALVE BRASMATIC / SANT CATEGORY - 2
HUMIDIN/ DYNA* / KIRLOSKAR* / PUROMATIC* /
91 FILTERS PURAFILL* / THERMODYNE* / PURE AIR* CATEGORY - 3
USHA FILTERS & ALL MAKES IN CAT-A
FINDER/ / DANFOSS/ HONEYWELL* / JOHNSONS* /

LANDIS & STEAEFA*/ PENN* / INDFOSS* / ESCORTS*
92 THERMOSTAT / DASSPASS* / SWIZER* CATEGORY - 3
ALL MAKES IN CAT-A
HP /LP /OFF SWITCH THERMOSTATS /

93 DANFOSS/ ANERGY CATEGORY - 3
HUMIDISTATS STRIP HEATERS.
94 ENERGY SAVING DEVICES P2 POWER/ FINDER/ TDK(EPCOS) CATEGORY - 3
95 THERMOMETERS WIKA/ EMERALD/ JAPSIN* / FIEBIG*/ GURU* CATEGORY - 3
96 PROPORTIONAL THERMOSTATE HONEY WELL / JOHNSONS / LANDIS & STEAEFA CATEGORY - 3
H.GURU / FIEBIG / JASPIN / BESTOBELL / GENERAL
97 PRESSURE GAUGE CATEGORY - 3
INSTRUMENTS
BUILDING MANAGEMENT SYSTEM
JOHNSON CONTROL/ DELTA (LOYTEC) / L&T/ TRANE/
98 (Hradware & Software, Except CATEGORY - 3
TRIDIUM/ SIEMENS/ AZBIL/ HONEYWELL
Computer & Accessories)
Corrigendum I - 29
DELTA/ L&T/ BHARAT BIJLEE / GRUNDFOS/
99 VFD DRIVE MITSUBISHI/ SCHNEIDER /ABB / DANFOSS / ALAN CATEGORY 3
BRADLEY*/ SIEMENS*
100 FIRE DAMPER MOTORS BALEMO /JUVANTO / SIEMENS CATEGORY - 2
SIEMENS / JHONSON CONTROL /HONEYWELL /RAPID
101 MIXING VALVE WITH MOTOR CATEGORY - 2
COOL
H A/C PLANTS, A/C UNITS & EQUIPMENTS.
HITACHI/ SAMSUNG/ CARRIER/ HAIER/ LG / BLUE
A/C UNITS ( SPLIT/ WINDOW/
102 STAR/ DAIKIN/ MITSHUBISHI*/ VOLTAS*(Split AC CATEGORY - 2
CASSETTE/ TOWER TYPE)
Only)
STULZ/ CLIMAVENTA/ SWEGON BLUE BOX/ VERTIV/
103 PRECISION AIR CONDITIONING CATEGORY - 3
SIDWAL
HITACHI/ TRANE/ CARRIER/ SIDWAL/ LG / VOLTAS*
104 PACKAGED AIRCONDITIONER / BLUESTAR* CATEGORY - 2
DAIKIN & ALL MAKES IN CAT-A
DAIKIN/ KIRLOSKER/ TRANE/ LG/ YORK / CLIVET/

BLUE STAR/ CLIMAVENETA/ DUNHAMBUSH/ VOLTAS/
105 CHILLERS / A.C. PLANTS CARRIER CATEGORY - 1
CRISTOPIA & ALL MAKES IN CAT-A.
EDGETECH/ STULZ/ TRANE/ CARRIER / HUMIDIN/

106 AIR HANDLING UNITS (AHU) ZECO/ WAVES/ CRYSTAL CATEGORY - 1
TRISTAR & ALL MAKES IN CAT-A
EDGETECH/ DAIKIN / TRANE/ YORK / CARYAIRE/

107 FAN COIL UNIT (FCU) CARRIER CATEGORY - 2
TRISTAR & ALL MAKES IN CAT-A
HITACHI/ SAMSUNG/ CARRIER/ HAIER/ VOLTAS/ LG/

108 VRV/ VRF AIRCONDITIONING SYSTEM CATEGORY - 2
DAIKIN/ TRANE/ BLUE STAR/ TOSHIBA/
BELL/ MIHIR* / PAHARPUR* / ADVANCE* /
COOLING TOWER UP TO 200 TR. CATEGORY - 2
109 SOUTHERN COOLING TOWERS*
COOLING TOWER ABOVE 200 TR. BELL/ MIHIR*/ PAHAR PUR*/ ADVANCE* CATEGORY - 2
WOLTER/ AIRFLOW/ GREENHECK/ RR/ ELTA /

FAN (AXIAL FLOW / INLINE / CRYSTAL/ NICOTRA/ GEC*/ ALMONARD* /
110 KHAITAN* / ACCEL* / CROMPTON* CATEGORY - 2
VENTILATION / PROPELLAR)
CARYAIRE & ALL MAKES IN CAT-A
R O SYSTEM /WATER SOFTENING ZERO B CATEGORY - 3

111
PLANT VENZA & ALL MAKES IN CAT-A CATEGORY - 3
112 WATER COOLER ZERO B/ SIDWAL CATEGORY - 3

I PA SYSTEM
YAMAHA / NEXO/ HEINRICH/ HONEYWELL/ BOSCH* /
113 AMPLIFIERS CATEGORY - 2
BOSE*
ANNOUNCEMENT MICROPHONES /CAR YAMAHA / NEXO/ HEINRICH/ HONEYWELL/ BOSCH* /
114 CATEGORY - 2
CALL CONSOLES BOSE*
115 CONTROLLERS YAMAHA / NEXO / HEINRICH/ HONEYWELL CATEGORY-3
YAMAHA / NEXO/ HEINRICH/ HONEYWELL/ APOLLO/
116 SPEAKER EDWARDS (UTC)/ SIEMENS/ BOSCH/ NOTIFIRE/ CATEGORY -3
BOSE*
J MISCELLANEOUS ITEMS.
Corrigendum I - 30
SIEMENS/ TYCO- ILLUSTRA / HONEYWELL/ BOSCH* /
117 CCTV CAMERA CATEGORY - 2
ULTRAK*/ PELCO*
SIEMENS/ TYCO- ILLUSTRA/ HONEYWELL/ BOSCH* /
118 DVR CATEGORY - 2
ULTRAK*/ PELCO*
SAMSUNG / LG / SONY/ JVC / PANASONIC/ BOSCH /
119 LCD/LED/PLASMA MONITOR CATEGORY - 2
ULTRAK/ PELCO
120 COMPUTER/PC/ACCESSORIES HP/DELL/WIPRO/IBM CATEGORY -2
TECHNOCRAT/ ANAND AUTOMATIC SYSTEM*/
121 HAND DRIER CATEGORY - 3
KOPAL*/EURONNICS
HDPE/ DOUBLE WALL CORRUGATED NARAYANI POLYPIPES/ BEC/ GEMINI/ GANGOTRI /
122 CATEGORY - 3
HDPE PIPE TELEREX / DURALINE / HIMALYAN*
123 HDPE TANK ISI MARK CATEGORY - 3
124 AUTOMETIC GLASS DOOR AUTOINGRESS/ NEPTUNE (FAAC)/ GODREJ CATEGORY - 3
125 BOLLARD BROSIS/ NEPTUNE (FAAC) CATEGORY - 3
126 BOOM BARRIER AUTOINGRESS/ BROSIS/ NEPTUNE (FAAC) CATEGORY - 3
127 TROLLY GATE AUTOINGRESS CATEGORY - 3
128 TYRE KILLER BROSIS/ NEPTUNE (FAAC) CATEGORY - 3
POLES/ HIGH MAST/ DECORETIVE RR ISPAT/ SGS / VALMONT/ BAJAJ / SUMIP

129 CATEGORY - 3
POLES TWINKLE & ALL MAKES IN CAT-A
130 SMU / STRING COMBINER BOX HENSEL / ADVANCE CATEGORY - 3

SUNGROW/ DELTA/ POWER ONE & ANY
131 SOLAR INVERTER CATEGORY - 2
MANUFACTURER APPROVED BY MNRE/ BIS.
JAKSON ENGINEERS / HHV SOLAR TECHNOLOGIES
132 SOLAR MODULES (HHV ST) & ANY MANUFACTURER APPROVED BY CATEGORY - 2
MNRE/ BIS
KEI/ BONTON/ CMI/ ALOKE/ APAR/ BHANSALI/
133 DC CABLES CATEGORY - 2
GLOSTER
ALUMINIUM LADDERS/ HYDRAULIC SUMER

134 CATEGORY - 2
LADDERS PARAS / VARDHMAN & ALL MAKES IN CAT-A
135 DASH FASTNERS HILTI/ MUNGO CATEGORY - 4

K GROUND LIGHTING ITEMS
FOR CAT-III LIGHTING SYSTEM ,ONLY FAA CERTIFIED INSET LIGHT, CCR,
ISOLATING TRANSFORMER, PLUG & RECEPTACLES AND AGL CABLE SHALL BE USED
AS PER AVIALIBILITY.
ELEVATED RUNWAY/ TAXIWAY/ MANUFACTURERES WHO MEET ICAO REQUIREMENT
136 CATEGORY - 1
APPROACH LIGHT FITTINGS FOR ISO CANDELA AS SPECIFIED IN ANNEXURE - 14.
LED BASED TAXIWAY FITTINGS ( MANUFACTURERES WHO MEET ICAO REQUIREMENT
137 CATEGORY - 1
INSET/ ELEVATED) FOR ISOCANDELA AS SPECIFIED IN ANNEXURE - 14.
MANUFACTURERES WHO MEET ICAO REQUIREMENT
138 INSET TYPE LIGHT FITTINGS CATEGORY - 1
FOR ISOCANDELA AS SPECIFIED IN ANNEXURE - 14.
AMA / MANUFACTURES WHO MEET ICAO
139 PAPI CATEGORY - 1
REQUIREMENT
THORN/ IDAM-OY/ CEGELEC/ ADB/ ERNI/ YOUYANG
140 LENSES/FILTERS CATEGORY - 1
OR AS RECOMMED BY OEM
141 LAMPS (T-14. T-10, SPERICAL) JS LAMPS / KOILITE / PHILIPS CATEGORY - 3
OSRAM / PHILIPS / YOUYANG OR AS RECOMMED BY
142 LAMPS (HALOGEN) CATEGORY - 3
OEM
Corrigendum I - 31
BILDAL/ AMA/ ELECTROMACH/ THORN/ IDMAN-OY/
CATEGORY - 1
143 ISOLATING TRANSFORMERS CEGELEC/ ADB/ YOUYANG
CTC & ALL MAKES IN CAT-A
HONEYWELL/ HIND RECTIFIER/ AMA/ NASU/ THORN/

144 CONSTANT CURRENT REGULATORS CATEGORY - 1
IDMAN-OY/ CEGELEC/ ADB/ YOUYANG
KEI/ ALOKE/ RALLISION/ BHANSALI/ GLOSTER /
5 KV GRADE AIRFIELD LIGHTING
145 DYNAMIC & MANUFACTURER HAVING 11KV GRADE CATEGORY - 1
CABLE
BIS/ FAA CERTIFIED CABLES
AMA/ BILDAL /ALOKE/ BCH/ NEPTUNE- BALS/
146 PLUGS & RECEPTACLE CATEGORY -2
VASANTH/ YOUYANG
* Shall be considered subject to enlistment of Item/ Product as per terms & conditions, criteria etc.
of Expression of Interest (EOI) of AAI at CHQ level, before supply of Item/Product.
CATEGORY REQUIREMENT OF TEST CERTIFICATE/INSPECTION
CATEGORY- 1:
a) Type test certificate for similar item done. If not. one of the items offered is to be type tested.
b) OEMs routine test certificate.
c) Acceptance test to be conducted in the presence of AAI representative at OEMs factory.
CATEGORY - 2:
a) Type test certificate for similar item done. If not, one of the items offered is to be type
tested.
b) OEMs routine test certificate.
c) Visual and functional check by AAI official at AAI airport site.
CATEGORY - 3:
a) OEM/Dealer/Contractor routine test certificate.
b) Visual and functional check by AAI official at AAI airport site
CATEGORY - 4:
a) Visual and functional check by AAI official at AAI airport site.
NOTE:
1. This categorization is done keeping in mind big projects wherein the bought out item quantity may be large. In case the
bought out item/ supplied items are of very less in quantity, required category may be reviewed by Technical sanction
Authority. Technical sanction authority shall finalise the requirements of certificate at the time of call of tender.
2. Following guidelines shall be followed while implementing the preferred makes list:-
(a) The technical sanctioning authority or the NIT approving authority shall specifically indicate in tender document the make
of the items in accordance with approved list (Annexure-A2).
(b) In case of supply item tender, where a manufacturer directly participates and whose make is not included in the approved
list but otherwise meets the notice inviting tender conditions, then NIT approving authority may examine the merit of the
case and consider/allow their make appropriately for participating only in that tender.
(c) Preferred makes list under CAT-A shall be for Terminal buildings, Office buildings & ancillary Buildings in Operational area.
(d) Preferred makes list under CAT-B shall be for Residential Colony, Ancillary Buildings in Non-operational area & Service
block/Substation building.
(e) All makes in CAT-A are eligible for CAT-B also.
(f) Items/ Products under (*) Star Category, shall be considered subject to :-
(i) ED Engg. Shall have the powers to accept the star (*) marked items/products for a particular project, case to case basis,
without formal enlistment, on the merit of the case.
(ii) Items/Products kept under Star (*) Category, shall be considered subject to fresh enlistment of the item/product as per
terms & conditions, criteria etc. of Expression of Interest (EOl) of AAI at CHQ on approval of ED (Engg.)-NR.
Corrigendum I - 32
(iii) Project specific items, which are not covered in this preferred makes list, may be considered with the approval of TS
Authority, not below the rank of GM (Engg.)/GM (P).
3. In addition to above, GM (Engg.) of respective regions shall have the powers to approve the product make for maintenance
works following transparent process.
4. Where less than 03 options of makes are mentioned in the list, TS authority (not below than GM) may add the renowned
& reputed makes as per the merit of the case as work specific makes as per AAI requirements
5. Field units must ensure the codal procedures and quality etc. while procuring the materials, notwithstanding the approval
and must give prompt feedback in case of any adverse report in respect of quality, durable life, performance and successful
completion of contracts/orders etc. by the firm.
6. The enlistment of items/products of manufacturer/OEM shall be valid for a period of one year on trial basis and the same
shall be extendable for further period of three years, subject to satisfactory performance and feedback from the field
stations/Airports.
7. In case of any adverse report of performance of the products the approval may be cancelled/withdrawn/withheld at any
time with immediate effect with the approval of Member (Plg.).
8. This list shall be applicable for all electrical works including Maintenance ,Special repair, Project (CONSULTANT/EPC) &
Composite works.
S. NO ITEMS PREFFERED MAKES

L PROJECT SPECIFIC ITEM
A. IT SYSTEM
1 All Servers DELL, HP, CISCO, Indigenous OEM (if any)
Cisco/Pulse Secure/HP-ARUBA,Extreme, Allied Telesis,
1-a AAA Server
Indigenous OEM (if any)
2 Desktop / Laptop / Workstation DELL, HP, IBM, Indigenous OEM (if any)
NET RACK, SCHENIDER, RITTAL, EMERSON-VERTIV,
3 Network / Server Racks
APW PRESIDENT, ATROSYS, Indigenous OEM (if any)
APC-SCHENIDER, EMERSON VERTIV, EATON, DELTA,
4 ONLINE UPS
5 RODENT REPELLENT SYSTEM C-SYSTEM, MASER, RS CAT, Indigenous OEM (if any)
ACTIVE NETWORK SWITCH JUNIPER, HP- ARUBA, CISCO, EXTREME , Allied
6
(Core/Distribution/Access) Telesis, Indigenous OEM (if any)
CISCO, JUNIPER, ALCATEL-Nokia, HP, EXTREME,
7 ROUTER
PALO ALTO, CHECK POINT, CISCO, Fortinet, HP -
8 FIREWALL
Aruba, Indigenous OEM (if any)
WIRELESS LAN SYSTEM/ WIRELESS HP-ARUBA, CISCO, ALCATEL-Nokia, HP-Arista,
9
ACCESS POINTS/WLC EXTREME, Indigenous OEM (if any)
C-SYSTEM, JAY FIRE, SONTAY, ATROSYS, Indigenous
10 WATER LEAK DETECTION
OEM (if any)
SECURITION, XTRALIS, SYSTEM SENSOR, Indigenous
11 VESDA SYATEM
OEM (if any)
ALL CABLING & CONNECTOR PANDUIT, SIEMON, COMMSCOPE, SCHNIDER-
12
COMPONENTS ACTASSI, Indigenous OEM (if any)
Microfocus, BMC, IBM, Juniper, Cisco, HP, Indigenous
13 EMS/NMS
OEM (if any)
CISCO,UNIFY , ATOS, AVAYA, NEC, Indigenous OEM
14 IPABX
(if any)
B PA SYSTEM
1 Equipment Rack and Accessories APW/PRESIDENT/ RITTAL/ ATROSYS
Corrigendum I - 33
Automatic Flight Announcement System
2 Harman/Biamp/Bosch/EASYVIGIL/ TEKINFO
Software(AFAS)
3 Workstation/PC DELL/HP/IBM/LENOVO
C HVAC
1 CHW Cassettte Unit Zeco, Edgetech, Crystal Air
2 Hot Water Generator Emerald, KEPL, Rapidcool
3 BTU Meter Siemens, Honeywell, Belimo
4 Dirt Seperator Flamko, Spirotech, IMI Hydronics
5 Online Non-Chemical Water System Elgressy, Enpar, Terragon
6 Humidifier Emerald, KEPL, Rapidcool
7 VAQ Station Systemair, Caryaire, Ruskin
8 CO Sensor Siemens, Honeywell, Azbil
D Drinking Water Fountain Oasis, Vanza, Blue Star
E Boom Barrier & Tyre Killer FAAC, Atrosys, Gunnebo, Kaba, Godrej
PROJECT SPECIFIC ADDITIONAL MAKES FOR JODHPUR AIRPORT PROJECT
S.NO. ITEMS PREFERRED MAKES

Electrical
1. Lighting Control System Lutron/ Panasonic/ Control 4/ABB
Legrand / MK/ Global Power Industries (GPI)/ OBO
2. Floor trucking/ Raceways
Betterman/ Anant Power (Advance)
3. CT/PT Kappa/ AE/L&T/Kaycee
4. Hybrid panel Schneider/ ABB/ Siemens/ L&T
BMS system Component
Duct sensor, BTU meter, flow meter, level
5. Siemens/ Honeywell/ Johnson control
switch, Water/PH. Chlorine hardness analyser
and all accessories
6. PLC Schneider/ Siemens/ Allen Bredley
7. GI Conduit RMCOM/AKG/Tarun/ BEC
HVAC
INTELLIGENT ADIABATIC COOLING SYSTEM
1 Energeo / Smart Cooling/ GESS international FZC LLC
FOR CHILLER
2 CBR filtration system in AHU Trion, Ultrapure, Intelligreen, Magneto.
3 Fire Rated coating over Ductwork Feukem/Hilti/3 M
Duct Mounted Air Purification Pentagon/ UVGI/
4 Trion, Ultrapure, Intelligreen, Magneto.
COMPREHENSIVE AIR PURIFICATION SYSTEM
AOP CELL (FOR Standalone)/ ULTRASORB
5 Trion, Ultrapure, Intelligreen, Magneto.
ODOR SCRUBBER for STP
7 Pre insulated pipe Zeco/ Seven Star/ Parma
8 Actuators Danfos/ Johnson Control/ Belimo Siemens
9 Flow switch test point System sensor/ Indfoss/Potter/Siemens
10 Airwasher/ Dryscruber Crystal/ Ensaviour/ Zeco/ Edgetech/ Humidin
Corrigendum I - 34
WTP
1. WTP Pumps Grundfos/ Xylem/ KSB
2. Variable Frequency Drives Siemens/Danfos/Schneider
3. Couplings Lovejoy/Dunlop
4. Anti Vibration Mounting Dunlop/Resistoflex
5. Pressure Gauge Emerald/Fiebig/ Axin /HGURU
6. Water Meter (Mechanical Type) Kaycee/Kamstrup
7. Level Controller (Water) Active Controls/Minilec/ Technika
8. Level Indicator (Water) Active Controls/Minilec/ Technika
9. Paints Asian Paints/Shalimar Paints/ Rajdoot
10. MH / Water Tank Plastic Steps KGM
11. Water Treatment Plant, R.O., Filters etc. Bikon/ Brisanzia/ Eco Water Solution/ Netsol
12. Water Treatment Vessel Structural / Astral
13. Ultra Violet Water Purifier Eureka Forbes/Pentair/ Eurostar/ Aquatech
14. Dosing Pumps LMI /Toschon/ Pulser Feeder
Armacel – Armaflex (UK)/Eurobatex – Union Foam (Italy)/
15. Insulation for Hot Water Pipes
K-Flex
16. Pypcoat for Burried Piping IWL/Coaltek
17. CI (LA) Pipes and fittings Electrosteel/Kesoram
18. Hot Water Generators Thermax/Olympia /AO Smith
19. Solar Water Heating System Solahart/Tata BP/ Rallison/ Cognitive Energy
20. Gyeser Rallison/ Havells/ Venus
21. Ozonotor Alpha/ Oz Air./ A-M Ozonics / Creative
22. Water Fountain Oasis/ Voltas/ Bluestar/ Usha
23. Multi Grade Filter/Activated Carbon Filter Bikon/Ion Exchange/Thermax/Urobatax
24. Dosing Tanks Sintex/ Sheetal/Ganga
STP
CENTRIFUGAL TYPE, NON CLOG SELF PRIMING
1. Grundfos / Xylem/KSB
PUMPS & SUBMERSIBLE DRAINAGE PUMPS
Ion Exchange / Netsol Water / Eco Water Solution/ Thermax
2. Plate settler
/ Bikon / Pure India/ MarvTech
Ion Exchange / Netsol Water / Eco Water Solution/ Thermax
3. Agitator
/ Bikon / Pure India/ MarvTech
4. Air blower Swam / Key / Everest /Beta/Usha
5. Reduction gear box Radicon / Elicon / Shanti
6. Pressure gauge AV Instruments / H.Guru / FIBIG/Honeywell
7. Chlorinator ALM / Toshkon
8. Sump pump Grundfos / Kirloskar /Xylem/Armstrong/Lubi
9. Pressure Gauge/ D.P Gauge Emerald/Fiebig/HGURU/Axin
10. Level Controller/Indicator ADVANCE
11. Flow Meter/Water meter KENT/Honeywell/Kamstrump
12. Air diffusers Scogen/ Cooldeck /MM Auqa
Corrigendum I - 35
13. Chemical Dosing Pumps Milton Roy /Toshcon /Prominent/
14. MBBR Media / Tube Settler Media Cooldeck / Welcome/ MM Aqua
15. Multi grade filter/activated carbon filter Bikon/Brisanzia/ION Exchange/Thermax
16. Dosing tanks Sintex/ Sheetal/Ganga
Sludge/sewage transfer pumps/ centrifuge feed
17. Kirloskar / Johnson/Wilo
pumps
18. Instrumentation Aster/Abb/Siemens
19. UV System Alfaa/Sukruit/Mechtech
20. Ultra Filtration Membranes Dow/ Qua/ Torray
21. Water Meters Aquamet/ Kranti / Anand
22. PH Meters ION Exchange/ Aster/
23. Rota Meter For Airs Microwflow/Flowstar/Aster
24. Flow Meters Aster / Flowstar/Scientific Devices
25. Liquid Level Controllers Minilec / Pune Techtrol / Active Control/Cirrus
26. Submersible Mixer Aqua (Italy) /CRI
Misc
1 Waste composter system Green planet Solution/ Urban Solution/ Praftech infra project
Lift & Escalator
1. Lift & Escalator Schindler
Johnson
Otis
Kone
Mitsubishi
Corrigendum I - 36
LIST OF APPROVED MAKES FOR ELV System
S.No. Items Approved Make List
SUB HEAD - I: DATA, WI-FI AND VOICE NETWORKING
1 Modular face Plate Molex/ Legrand /Panduit/ Siemon
2 Passive Equipment - Patch Panel, LIU patch cord Molex/ Legrand /Panduit/ Siemon
3 UTP CAT Cable Molex/Legrand /Panduit/ Siemon
4 Optical Fiber Cable Molex/Legrand /Panduit/ Siemon
5 Active Equipment - Wi-Fi , Controller and Network Ruckus/Cisco/Juniper/ Extreme/Palo alto/Techroute
Switches , SFP Module, Router , Firewall etc.
6 Network Rack Valrack/Rittal/APW
7 PVC conduit and Accessories AKG/BEC/RMCOM
8 Video Wall Samsung / Phillips / Panasonic / LG
9 Work Station HP/Dell/Lenovo
10 Server HP/Dell/Lenovo
11 Online UPS Vertiv / Numeric / APC / Hitachi
SUB HEAD - II : EPABX System

1 EPABX system Alcatel Lucent-Omni PCX Enterprise /Avaya-
Auro/Unify-Openspace 4000 / NEC
2 IP / Analog Telephones Alcatel Lucent/Avaya/Siemens/ NEC

PUBLIC ADDRESS SYSTEM
1 PA controller, Microphone Honeywell/Bosch/ Heinrich
2 PA Amplifier Honeywell/Bosch/ Heinrich
3 PA Speakers Honeywell/Bosch/ Heinrich
SUB HEAD - IV: IP BASE SURVEILLANCE SYSTEM (CCTV)
1 Dome Camera Axis/ Bosch/ Honeywell
2 Bullet / Box Camera Axis/ Bosch/ Honeywell
3 PTZ Camera Axis/ Bosch/ Honeywell
4 PTZ Keyboard / Joystick Axis/ Bosch/ Honeywell
6 Server (VMS and recording) HP/Dell/Lenovo
7 55 in LED Monitor Samsung / Phillips / Panasonic
11 Network / Field Rack Valrack/Rittal/APW
SUB HEAD - V: FIDS
1 UTP Cable Molex/Legrand /Panduit/ Siemon
3 FIDS Server HP/Dell/Lenovo
4 FIDS Software Xtreme-Media / LG/Brightsign
5 AFAS package software for FIDS components Xtreme-Media / LG/Brightsign
6 IVRS package software for FIDS components Xtreme-Media / LG/Brightsign
Corrigendum I - 37
7 LED Display for FIDS Samsung / Phillips / Panasonic
9 Rack Valrack/Rittal/APW
10 NTP Server HP/Dell/Lenovo
11 Server for Automatic Flight Announcement System HP/Dell/Lenovo
(AFAS)
12 Server for Interactive Voice Response System (IVRS) HP/Dell/Lenovo
Corrigendum I - 38
SIGNAGES
Following type of signages are to be generally provided at this Airport. Construction/Technical

details of signages shall be as per enclosed drawings & specifications. Location and quantity
selection shall be as per design and site requirement.
S. No. Description Ref no *
A Non illuminated
1 Airport Entry/Exit Portal signage 1.1
2 Pole mounted Vehicular directional signage 1.3 (a)-1
3 Directional signage Pedestrian 1.3 (b)
4 Traffic statutory signage 1.4 (a)
5 Entry Exit Announcer signage 1.6 (b)
6 Facility Announcer‐wall Mounted signage 1.7 b
7 Door Mounted Facility Announcer signage 2.2 (c)
8 Service area signage 2.4 (b)
9 Statutory signage (Posters) 2.5 (a-c)
10 Emergency signage Fire Life safety layout 2.6 d
11 photo luminescent signs 2.6 (b)
B Illuminated
1 Ceiling Hung Directional signage 2.1 (a)
2 Floor mounted Directional signage (without FIDS screen) Signage 2.1b‐1
3 Facility Announcer‐Floor Mounted signage 1.7 (a)

4 Wall mounted directional signage 2.1 c
5 Wall projected directional signage 2.1 d
6 Wall Mounted Facility Announcer signage 2.2 a
7 Wall projected facility signage 2.2 b
8 Boarding gate wall projected signage 2.2 g-2
9 Boarding gate wall mounted (without FIDS screen) signage 2.2 g-3
10 Belt No signage 2.2 h

11 Wash room, drinking water/ baby care signage 2.4 a
12 Emergency direction signage 2.6a
13 Terminal Building Announcer signage 1.8
* Refer Enclosed Drawings.
Corrigendum I - 39
Drawing Numbers IG-D-01 03 2.2c Door Mounted Facility Announcer Sign 2.2c-S, 2.2c-G 68-69
Wayfinding Strategy IG-W-01 04-05 2.2d-1 Counter Mount Facility Announcer Sign 2.2d1-S, 2.2d1-G 70-71
Pictograms 06 Counter Mount Facility Announcer Sign - with
2.2d-2 2.2d2-S, 2.2d2-G 72-73
Screen
Traffic Signs 07 2.2e-1 Ceiling Hung Facility Announcer Sign 2.2e1-S, 2.2e1-G 74-75
Common notes IG-N-01 08 Ceiling Hung Facility Announcer Sign - with
2.2e-2 2.2e2-S, 2.2e-2-G 76-77
Materials Swatches IG-M-01 09
Screen
2.2f Floor Mounted Facility Announcer Sign 2.2f-S,2.2f-G 78-79
Material Specifications I G-S-01 10
Sign Type
2.2g-1 Boarding Gates - Totem 2.2g1-S,2.2g1-G 80-81
Sign Type Drawing Nos Page Nos
Code 2.2g-2 Boarding Gates - Wall Projected 2.2g2-S,2.2g2-G 82-83
1. Exterior Signs
2.2g-3 Boarding Gates - Wall Mounted 2.2g3-S,2.2g3-G 84-85
1.1 Airport Entry Portal 1.1-S, 1.1-G 12-13
2.2h Belt No. Sign 2.2h-S,2.2h-G 86-87
1.2 Periphery Airport Name Sign 1.2-S,1.2-G 14-15
2.2i Bay Announcer 2.2i-S,2.2i-G 88-89
1.3a-1 Vehicular Directional Sign - Pole Mounted 1.3a-1-S, 1.3a-1-G 16-17
2.2j-1 Baggage Screening - Pole 2.2j1-S,2.2j1-G 90-91
1.3a-2 Vehicular Directional Sign Portal 1.3a-2-S, 1.3a-2-G 18-19
2.2j-2 Baggage Screening - Box 2.2j-2-S,2.2j2-G 92-93
1.3b Pedestrian Directional Sign 1.3b-S,1.3b-G 20-21
2.3 Information Signs
1.4a Traffic Statutory Sign 1.4a-S,1.4a-G 22-23
2.3a (Airport) Zonal Route Map 2.3a-S,2.3a-G 96-97
1.4b Traffic Information Sign 1.4b-S,1.4b-G 24-25
2.3b Lift Directory 2.3b-S,2.3b-G 98-99
1.5a Airline Listing - Directional 1.5a-S,1.5a-G 26-27
2.4 Utility Signs
1.5b Airline Listing - Announcer 1.5b-S,1.5b-G 28-29
2.4a Washroom / Drinking Water/ Baby Care 2.4a-S,2.4a-G 102-103
1.6a Arrival/Departure Zone Marker 1.6a-S,1.6a-G 30-31
2.4b Service Area 2.4b-G 104
1.6b Entry/Exit Announcer 1.6b-S,1.6b-G 32-33
2.4c Lift Number sign 2.4c-S,2.4c-G 105-106
1.7a Facility Announcers - Floor Mounted 1.7a-S,1.7a-G 34-35
2.5 Statutory Signs
1.7b Facility Announcers - Wall Mounted 1.7b-S,1.7b-G 36-37
2.5a Poster Size A0 2.5G-01 108
1.7c Facility Announcers - Bldg Mounted 1.7c-S,1.7c-G 38-39
2.5b Poster Size A1 2.5G-01 108
1.7d Facility Announcer - Passenger Amenities 1.7d-S,1.7d-G 40-41
2.5c Poster Size A2 2.5G-02 109
1.8 Terminal Building Announcer 1.8-S,1.8-G 42-43
2.5d Poster Size A3 2.5G-02 109
1.9 Airport Map 1.9-S,1.9-G 44-45
2.5e Poster Size A4 2.5G-02 109
2. Interior Signs
2.6 Emergency Signs
2.2 Directional Signs
2.6a Emergency Direction Signs - Illuminated 2.6a-G 111
2.1 Artwork for Directional Signs 2.1-G 47
2.6b Emergency Signs - Photoluminiscent 2.6b-G 112
2.1a Ceiling Hung Directional Sign 2.1a-S, 2.1a-G 48-49
2.6c Emergency Signs - Assembly Point 2.6c-S,2.6c-G 113-114
2.1b-1 Floor Mounted Directional Sign with FIDS 2.1-b1-S, 2.1b1-G 50-51
2.6d Emergency Signs - Fire Life Safety Layout 2.6d-G 115 Project: Wayfinding Signage Design
2.1b-2 Floor Mounted Directional Sign with Map 2.1-b2-S, 2.1b2-G 52-53
2.7 Temporary Signs
2.1b-3 Floor Mounted Directional Sign - Single 2.1-b3-S, 2.1b3-G 54-55 Client:
2.7a Queue manager Sign 2.7a-S,2.7a-G 118-119 Airport Authority of India
2.1b-4 Floor Mounted Directional Sign - Double 2.1-b4-S, 2.1b4-G 56-57
2.7b Information Sign 2.7b-S 120
2.1c Wall Mounted Directional Sign 2.1c-S, 2.1c-G 58-59 Wayfinding Signage Design Consultant
2.9 Parking Signs
2.1d Wall Projected Directional Sign 2.1d-S, 2.1d-G 60-61 Tata Elxsi Limited
2.9a Parking Directional Sign 2.9a-S,2.9a-G 122-123
2.2 Facility Announcer Signs Signage Details Document
2.9b Parking Announcer Sign - Portal 2.9b-S,2.9b-G 124-125
2.2a Wall Mounted Facility Announcer Sign 2.2a-S, 2.2a-G 64-65 Date: 10.10.2017
2.9c Parking Statutory Sign 2.9c-S,2.9c-G 126-127
2.2b Wall Projected Facility Announcer Sign 2.2b-S,2.2b-G 66-67
Drawn by: RA Checked by: AA
2.9d Parking Information Sign 2.9d-S,2.9d-G 128-129
Corrigendum I - 40
Drg No Page 3
Wayfinding Strategy Driving Factors
Developing a successful signage and wayfinding strategy requires a thorough understanding of all the functions Visual Continuity The user’s experience should be driven by logical continuity, providing
of the site, a critical usage of each space and zone and primarily, the understanding of the user and their sense necessary information at the correct place and time intervals.
of presence and space. The visitors’ focus has to be maintained by reduction of clutter and confusion, with the
information being presented only in the requisite amount to enable them to traverse from one decision point to
Visual Consistency Signs should be consistent to the highest degree possible in appearance,
another. The aspect of legibility and ease of understanding is also of priority.
messaging and placement in order for quick recognition and decisions.
Defined Information Heirarchy Information which is most critical to a user’s journey, as well as the function,
needs to have greater priority to avoid confusion and slowdown.
Elements of Sign Design Legibility A legible sign comprises of easily readable typefaces, graphics and form.
Contrast is key in decoding sign information easily and quickly.
These following elements need proper design for a successful signage strategy :
• Background and Contrast

Universal Comprehension In a diverse nation, the use of multilingual signs are necessary for removing
communication boundaries for all possible users.
• Typeface and size
• Multilingual nature
• Arrows and Pictograms
Background and Contrasrt
Airport Airport Airport Airport
Project: Wayfinding Signage Design
Client:
Internal signs: Primary signs: Black background with yellow text
Secondary signs : Black background with cyan text Airport Authority of India
External signs: Along the Kerb: Yellow background with Black text (Background may vary as per location) Wayfinding Signage Design Consultant
Road Signs : Blue background with White text. Tata Elxsi Limited
Signage Details Document

Date: 10.10.2017

Corrigendum I - 41
Drg No IG-W-01 Page 4
Wayfinding Strategy
Typeface and Size Relationship Arrow and Pictogram
x ( Ht of Primary 0.6 x (Ht of Second 1.2x (Ht of 2.2x (Ht of Readable distance, m
Y 0.6x A/P artwork 0.6x
Text, mm) Text,mm) Picto,mm) Arrow,mm) 0.425 Y 0.425 Y
75 45 90 165 27.5
0.425 Y
125 75 150 275 42.5
150 90 180 330 55
Y
210 126 252 462 71.5 x 1.2x
0.425 Y
250 150 300 550 85

300 180 360 660 110 0.15 Y
y
This document specifies sign sizes for cap ht X=75.
Proportions of the Arrow
Spaces with double heights, extensive lenths should prefer the range of cap height given in the table for ease of readability. Picto height : = 1.2 times of the Primary Text height (X)
Refer the Sign Schedule for cap height specifications for particular signs. Picto Width(y) = vary basis height, proportionately
0.6x 2.2x 0.6x A/P artwork 0.6x 0.6x A/P artwork 0.6x A/P artwork 0.6x
अंतरदेशीय वचप अंतरदेशीय प्र�ान

0.6x 0.6x
0.6x
Domestic Departures
0.6x
2.2x
x 1.2x
0.6x 0.6x
Multilingual Nature
Client:
Airport Authority of India
Wayfinding Signage Design Consultant

Tata Elxsi Limited

The above mentioned text are chosen for their unicode, for thier free and open nature. Other languages would
be added as per requirement for future applications. Aligned to left Aligned to right Date: 10.10.2017
of sign panel of sign panel Drawn by: RA Checked by: AA
Corrigendum I - 42
Drg No IG-W-01 Page 5
Arrivals Crew / Staff
Phone Elevator Recycle Pictograms
Departures Escalator Info Moving Walkway 2 Wheeler Parking
Check In Family Room Fire call point Stairs Do not carry -

Flammable Gas
Lounges First Aid Fire hose Help Phone Do not carry -

Flammable Liquid
Baby Care Animal Quarantine Fire extingusiher Restaurant

Do not carry -
Compressed Gas
Accessible Duty Free Fire alarm Mail Box /

Post Office Do not carry -
Oxdizers
Drinking Water Cloak Room Oversized Baggage Wi Fi

Do not carry -
Flammable Solids
Baggage Bar / Cocktail Parking Trash

Do not carry -
Explosives
Toilet (Men) Passnger Pick up Baggage Cart

No Smoking Do not carry -
/ Drop off
Radioactive Materials
Toilet (Women) Bus Coffee Bar Do not carry -

Smoking Room Poison
Day hotel Taxi ATM Do not carry -

Please Wait Spontaneous
Combustible Materials
Customs Rental Car Money Exchange Do not carry -

No Entry Corrosives
Terminal Rail Transport Immigration No cell phones Do not carry - Client:

Toxics Airport Authority of India

Medical Office Subway Securuty Check No photographs Do not carry -
Magnets
Tata Elxsi Limited

Transfers Prayer Nothing to Declare Lost and Found Date: 10.10.2017
Wheelchair Assistance

Corrigendum I - 43
Drg No Page 6
Traffic Signs
16
km/h
Client:

Tata Elxsi Limited

Date: 10.10.2017

Corrigendum I - 44
Drg No Page 7
Drawing Organization Common Notes
The drawings in this set are organized as follows -
Each drawing is identified by the sheet number in the lower right hand corner of the sheet title block.
For example, 1.1G-01
* Sign type - 1.1 - this indicates the code for the sign type.* Category - G/S - this indicates the type of the detail being
discussed on the page. G stands for graphics and S stands for signage detail.
* Sheet number - 01 - the numerical stands for the sheet number.
Dimensions
1. Alignment of panels and poles as scheduled shall be straight, true & plumb. Notify wayfinding design consultants
of discrepancies.
2. Vertical dimensions are indicated from the floor elevation to the finished material, unless otherwise noted above
finished floor (aff).
3. Exterior dimensions are to face of external material.
4. Verify all dimensions and conditions and notify wayfinding design consultants of all discrepancies in writing prior
to proceeding with work.
5. Dimensions are indicated to the centreline of the structural grid, face of concrete wall, nominal face of stone wall
or face of finish, unless otherwise noted.
6. Floor elevations are indicated at the face of structural slab, unless otherwise noted.
Contractor Use of Premises
1. Keep all roads, walkways, parking lots, entrances and exits clear of construction materials, debris and standing
vehicles and equipment.
2. All building exit ways, both interior and exterior, shall be maintained and open to traffic during the course of the
project.
3. Protect all occupants and visitors from construction related areas. Coordinate locations of barriers and
protective construction with the wayfinding design consultants and the owner.
4. Coordinate existing electrical and mechanical system shut-downs with the site manager. Project: Wayfinding Signage Design
5. Maintain temporary systems in operation until permanent systems are installed and operational or until temporary
systems are no longer required. Client:
6. Construct temporary dust barriers between areas of construction and the spaces those remain occupied. Airport Authority of India
7. Maintain operation of all existing building systems including, but not limited to, the fire protection & alarm system,
and equipment at all times during the course of the project.
Tata Elxsi Limited
Demolition, Cutting & Patching Keynotes:

The final shop drawing for internal
1. Where the removal of an assembly, or system, is required to perform the contract work, it shall be removed structure and sign fabrication shall
be created by signage contractor and
completely including furring, suspension devices, fasteners, adhesives, settings beds, etc. submitted for approval before production.
2. Where the relocation or rerouting of existing electrical or mechanical systems that are to remain in service is
required to accomplish the contract work, such systems shall be revised, reworked and restored to
service with minimal downtime and disruption to the owner's operations.
3. Removal of existing materials shall be taken to a point that patching can be accomplished to give a reasonable Signage Details
match or line. Status:
4. Repair all paving, walks and other site structures damaged or modified due to installation of signs. Revision No: 02
Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
General Notes - • All Dimensions are in mm. • All Dimensions are to be read and not measured. • Any Discrepancies must be brought to the notice of the consultant I of
before execution - 45
work at site. • This drawing must be read in conjunction with all relevant templates and sign schedule
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No IG-N-01 Page 8
Color / Material
Swatches
Airport Authority Logo

Always reproduce from original
artwork and its guideline
All the material swatch samples

will be presented by the vendor
for approval before starting any
procurement and production.
Approved controlled samples of
the swatches shall be submitted in
triplicate.
RAL 9011 RAL 9006 SS

Graphite Black Stainless Steel - Brush finish
Client:
Airport Airport Airport Airport Airport Wayfinding Signage Design Consultant

Tata Elxsi Limited
Keynotes:
structure and sign fabrication shall
All text Black on All text yellow C on All Typeface cyan All Typeface white on All Typeface white on submitted for approval before production.
yellow C Background 3M or equivalent vinyl 311C on RAL5013 3M or equivalent vinyl
Pantone Black C 3M or equivalent vinyl Pantone Black C
Background Pantone Black C Background Signage Details
Background
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No IG-M-01 Page 9
Material Specifications
Material Description Manufacturer/Make/Supplier Colour

Plotter cut Cast Opaque vinyls 3M/Avery or Equivalent As per the graphic specification in Graphic details
Plotter cut exterior grade opaque vinyl Matching with RAL code specified
Retroreflective white vinyl 3M/Avery Grade IV White retroreflective with Block opaque vinyl
Lasercut and/or fabricated Acrylic for backlit application Sample to be approved Milky White/040
- 6mm thick
Lasercut and/or fabricated Acrylic for backlit application Sample to be approved Milky White/040
- 8 mm thick
Plotter cut Transluscent Vinyls-yellow 3M/Avery or Equivalent As per the graphic specification in Graphic details
Plotter cut Transluscent Vinyls-cyan 3M/Avery or Equivalent
Aluminium fabricated sheet 1.29mm thick Jindal

Aluminium fabricated sheet 3mm thick Jindal
Aluminium box section 25x25 Jindal
Aluminium extrusion 50mm wide Jindal
SS fabricated Box Section 100x100 Brush Finish
SS fabricated cylindrical pipe OD 100 Brush Finish
MS fabricated box section300x300 Hotdipped Galvanized
Client:
Tata Elxsi Limited
Keynotes:
MS fabricated box section 25x25 Hotdipped Galvanized
Tension Rod structure and sign fabrication shall
Flex submitted for approval before production.
PU Paint RAL 9006
Power LEDs for backlighting Tetra® PowerStrip (GE) or equivalent from Philips, Osram 5000K
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No IG-S-01 Page 10
Sign Type 1.1
Airport Entry Portal
Principle
Sign placed on the approach road marking
entry into the Airport site. The sign is located
on top of a gantry. The sign bottom is 6000 mm
from the road top finish level.
Material Specification
1. Sign face - 3mm thick Aluminium sheet
fabrication with a white retroreflective film,
fixed to horizontal structural truss.
Graphics in plotter RAL 5013 exterior grade
opaque vinyl pasted over white retroreflective
vinyl.
Sign Frame (Spanning Truss) 2. Sign structure - MS square post 300x300 and
mounting square sections, hotdipped
galvanised and PU Painted to match RAL 9006
grouted in ground. Spanning truss shall be
Perspective designed for each. Mounting square section
span and the wind loads.
1. Sign Face The actual structural design of the sign for
Plan
its stability shall be responsibility of the EPC
contractor and shall be designed with due
300 300 consultation and approval from structural
designer.
1560
1560
12000 / As per the actual road width

1. Sign Face
Client:

2. Sign structure
Tata Elxsi Limited
6000
Keynotes:
submitted for approval before production.
Base plate
Signage Details
Status:
Revision No: 02
Front Elevation Side elevation

A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.1-S Page 12
Sign Type 1.1
Airport Entry Portal
As per Artwork
Eq As per Artwork 300 300 mm 300 mm Eq
420mm
420 mm
XXXXX िवमानतळार तुमचे �ागत असा XXXXX हवाई अ�े पर आपका �ागत है 180 mm
1560 mm
780 mm
300 mm
Welcome To XXXXXXXXXXXX Airport 300 mm

360mm
360 mm
Notes
Sign Face Artwork
The artworks are representative only.
Please refer to the structural drawings for
details.
XXXXX िवमानतळार तुमचे �ागत असा XXXXX हवाई अ�े पर आपका �ागत है
Welcome To XXXXXXXXXXXX Airport
6000 mm Client:

Tata Elxsi Limited
Keynotes:
Sign Front Elevation
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.1-G Page 13
Sign Type 1.3a-1
Vehicular Directional Sign - Pole
Mounted
2425
Principle
Signs placed on internal roads of Airport to
help align and manage vehicular traffic. The
sign is flag-mounted on a pole, with the sign
75
bottom being 2800 mm above the floor level.
2300
The panel is designed as per the graphic layout
standards specified.
Plan Material Specification

1.Sign face - 3mm thick aluminium with a
white retro-reflective film.
2425 Graphics in Plotter RAL:5013 Exterior grade
opaque vinyl pasted over white retro-reflective
125 2300 vinyl.
125
2. Sign frame - M.S.frame 50x50mm hotdipped
galvanised
175
75
3. Sign structure - MS square post 125x125
100
and mounting square sections 75x75mm,

150
hotdipped galvanised and PU Painted to

2. Sign Frame match RAL 9006 grouted in ground.
modular size in multiple of 435

Secret fixing methods should be used to fix
parts together.
4. Cover plate - 225x225mm, 5 mm thick cover
plate mounted on the flooring.
1000
1. Sign Face The actual structural design of the sign for

consultation and approval from structural
designer.
150
2100
4375
3. Sign Structure
Client:
Perspective
2800
2800

Tata Elxsi Limited
Keynotes:
4. cover plate Finished floor level submitted for approval before production.
Base plate Signage Details

Status:
300
Revision No: 02
Front Elevation Side Elevation Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.3a1-S Page 16
75mm 275 mm 75mm A/P artwork 75mm 75mm A/P artwork 75mm A/P artwork 75mm 75mm Sign Type 1.3a-1
Vehicular Directional Sign - Pole
�नगर्मन प्र�ान
75 mm
Mounted
75 mm
Departures
425 mm
275 mm
75 mm
125 mm
150 mm
75 mm
10
आगमन आगमन
Arrivals
~1300 mm
425 mm
Notes

10 Please refer to the structural drawings for
details.
पािक�ग पािक�ग
Parking
425 mm
2100 mm (multiples of 150 as per maximum width of artwork)
Sign Face Artwork �नगर्मन प्र�ान

Departures
1300 mm आगमन आगमन
Arrivals Client:
पािक�ग पािक�ग Airport Authority of India
Parking
Tata Elxsi Limited
Keynotes:
2800 mm
Signage Details
Status:
Revision No: 02
Sign Front Elevation A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.3a1-G Page 17
Sign Type 1.3b
Directional Sign - Pedestrian
Principle
Signs placed on internal roads and landscape
of Airport to align and manage pedestrian
75
movement. The sign mounted between two

poles. The sign bottom is 1500 mm from the
Sign face SignStructure
road top finish level. The panel is designed as
per the graphic layout standards specified.
Plan
1.Sign face - 3mm thick aluminium with a
white retro-reflective film.
Graphics in Plotter cut RAL:5013 Exterior grade
opaque vinyl pasted over white retro-reflective
vinyl pasted over 3mm thick aluminium sheet.
100 2100 100 2. Sign frame - M.S. frame 50x50mm wide,
75 75
75
hotdipped galvanized
3. Sign structure - M.S. hollow box section
75x75 and mounting square sections,
modular size in multiple of 150

hotdipped galvanised and PU Painted to
match RAL 9006 grouted in ground. All
2. Sign Frame hardware used for fixing of sign shall be
Stainless steel.
1300

parts together.
4. Cover plate - 5 mm thick cover plate
mounted on the flooring.
Perspective The actual structural design of the sign for
1. Sign Face
designer.
3700
2800
Client:
2400
3. Sign Structure
Tata Elxsi Limited
Keynotes:
4. cover plate Floor Finished Level structure and sign fabrication shall
Base plate
Signage Details
300
Status:
Revision No: 02
Front Elevation Side Elevation
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.3b-S Page 20
Sign Type 1.3b
Directional Sign - Pedestrian
T1 Domestic Departure
45 165mm 45 A/P artwork 45 A/P artwork 45mm 45mm A/P artwork 45 A/P artwork 45 165mm 45
45

165mm
255mm
T3
45
अंतररा��ीय आगमन अंतररा��ीय आगमन

International Arrival
255mm
Notes
Parking
255mm
1300mm

details.
�ाीपेड टै�ी �ाीपेड टै�ी T1 Domestic Departure

Pre Paid Taxi T3

255mm
अंतररा��ीय आगमन अंतररा��ीय आगमन

International Arrival
बस �ॉप बस �ॉप Parking

1300 mm
Bus Stop
255mm
�ाीपेड टै�ी �ाीपेड टै�ी

Pre Paid Taxi
बस �ॉप बस �ॉप
Bus Stop
2100 mm (multiples of 150 as per maximkum width of artwork)
Sign Face Artwork
Client:

2400 mm Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.3b-G Page 21
Sign Type 1.4a
Traffic Statutory Sign
Principle
Signs placed on internal roads of Airport to
enforce discipline for vehicular traffic and
deliver relevant information. This sign is 2700
50
mm high in total. The sign is mounted 2100
mm higher from the floor level.
600
Plan
1.Sign face - 3mm thick aluminium on two
sides of the sign structure with a white retro-
reflective film and red Pantone 485C and black
50 Pantone 6C vinyl.
2. Sign structure - MS square post 50x50,
hotdipped galvanised and powder coated
600
1. Sign Face
to match RAL 9006 grouted in ground. All
hardware used for fixing of sign shall be
Stainless steel.
parts together.
The actual structural design of the sign for

designer.
2700
2100
2. Sign structure
Client:

Tata Elxsi Limited
Bottom ring Finished Floor Level
Keynotes:
Anchor angle be created by signage contractor and
600
M20 Foundation
Signage Details
Perspective
Status:
Front Elevation Side Elevation Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.4a-S Page 22
Sign Type 1.4a
Traffic Statutory Sign
600 mm
DROP
AND Notes
GO
details.

2100 mm
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
SPEED LIMIT NO PARKING NO ENTRY Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.4a-G Page 23
Sign Type 1.6b
Entry/Exit Announcer
Principle
These are placed on the access portals of
the terminal building identifying the portal
150
number. The sign is mounted as a portal above

the entry. If there is just a top overhang, the
sign is fixed over the overhang.
700
250
1. Portal – The portal frame is site dependent.
Wherever existing portal exists, the portal to
have Yellow Pantone Yellow C opaque vinyl
10 mm thk
stuck over.
In case of no portal, 50mm wide portal has to
Secondary Letters Primary Letters be fabricated from 3mm thick ACP, with Yellow
Pantone 116C Vinyl Stuck over it.
2. Sign Letters-50mm thk 3D cut letters in
50 mm thk Perspective black glossy acrylic.
3. Sign Structure (in case of no portal) - The
internal structural frame to be made from 50
mm MS box section hot-dipped galvanized PU
Painted in colour RAL 9006.

50
Plan designer.
3. Sign structure
10000
150
1000
700
900
145
250
Client:
2. Sign Letters
1. Portal 600
4000
Tata Elxsi Limited
3100
3100
Keynotes:
Finished floor level The final shop drawing for internal
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
Sign Type 1.6b
Entry/Exit Announcer
3600 mm (in multiples of 150 mm) ( placed centrally aligned to portal)

As per artwork 150 150 As per artwork 150 As per artwork
150 mm 150 mm
150 mm
150 mm
700 mm
150 mm
250 mm
150 mm 150 mm
Sign Face Artwork Notes

details.
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Sign Front Elevation Status:
Revision No: 02
A3 size print

Corrigendum
600
Sign Type 1.7a
Facility Announcer- Floor
Mounted
600
450
75
Principle
These signs help announce the various facilities
on the airport. This sign is 3000 mm high in
total. The cube is mounted 2400mm higher
Plan from the floor level.
1. SignBox
1. Sign Box – Entire Sign face all 4 sides,
White translucent 040 acrylic, 5mm thick with
600
backlighting.
Graphics - Plotter cut vinyl Pantone Yellow
2. Sign Face
C, Blockout vinyl for text Pantone Black 6C,
pasted over acrylic with white diffuser film on
inside face.
3. Bottom panel – Bottom MS Panel powder
75
3. Bottom panel 8mm thick coated in colour to match Vinyl Black of
Pantone Black 6C.
4. Sign Structure: M.S. hollow box section
75x75 hotdipped galvanised and PU Painted
to match RAL 9006 fixed to ground.

3000
designer.
2400
Lighting : All internal illumination shall be

using Power LED Lights with electronic
controllers, having even spread and overlaps
to avoid banding and dark spots.
4. Sign structure
Client:
Cover plate Finished Floor Level

Tata Elxsi Limited
300
Base plate
Keynotes:
Perspective
Signage Details
Status:
Revision No: 02
A3 size print
Corrigendum
Sign Type 1.7a
Facility Announcer- Floor
Mounted
Principle
12
600 mm 600 mm
Remaining a/p artwork A/p Artwork 45 mm Remaining a/p artwork 45 mm A/p Artwork 45 mm
60 mm
60 mm
185 mm
Bay
200 mm
200 mm
12
75 mm
600 mm
600 mm
45 mm 45 mm
10 mm 10 mm
Bay
45 mm 45 mm
45 mm
टै�ी टै�ी 45 mm
टै�ी टै�ी
Taxi Taxi
30 mm
45 mm
90 mm टै�ी टै�ी टै�ी टै�ी
75 mm
75 mm
45 mm 45 mm
30 mm
Taxi Taxi
30 mm
45 45 45 mm 45 mm
Sign Face Artwork Sign Face Artwork

2400 mm
Client:

Tata Elxsi Limited
Keynotes:

Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
Sign Type 1.7b
Facility Announcer- Wall Mounted
Principle
Facility announcer used above the facility
window inside the airport teerminal counters
like tourist information.
25
Plan
1. Sign Face: Graphics - Plotter cut Blockout
1275 vinyl Pantone Yellow C, vinyl for text Pantone
Black 6C as per graphics, pasted over 8mm
thick White translucent 040 acrylic.
2. Sign Structure:25mm aluminium extrusion

inbuilt frame to recieve the sign face. The
panel should be made easily openable for
maintainance.
2. Sign structure
25
1275 contractor and shall be designed with due
400
designer.
255
100
1. Sign Face
Perspective
Client:
2400

Tata Elxsi Limited
Keynotes:
Signage Details
Front Elevation Side Elevation Status:
Revision No: 02
A3 size print

Corrigendum
Sign Type 1.7b
Facility Announcer- Wall Mounted
45mm A/P artwork 45mm A/P artwork 45mm 45mm A/P artwork 45mm
पयर्टन मदत क�द्र पयर्टक सहाय क�द्र

45 mm 45 mm
45 mm
Tourist Help Centre

165 mm
45 mm
75 mm
45 mm 45 mm
1275mm (multiples of 150 as per maximum width of panel)

Notes

Sign Face Artwork Please refer to the structural drawings for
details.
पयर्टन मदत क�द्र पयर्टक सहाय क�द्र

Tourist Help Centre
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
Sign Front Elevation Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
Sign Type 1.8
Terminal Buildng Announcer
Principle
These sign identify the terminal building and
are placed on the landside facade.
1.Letter face- White translucent 040, 5mm thick
acrylic. complete face shall be covered with
100mm thk translucent vinyl film to match Blue Pantone
541C.
2. Back channel - A channel made out of
aluminium to receive the front acrylic and
house the controller and LEDs
3. Spacer - Recommended for use for mounting
the larger text on the glazing frame
Mounting and structure -
Details shall be developed by the EPC
contractor in coordination with the glazing
detail at specific locations as proposed in the
900
900
sign.
600

900
designer.
Lighting : All internal illumination shall be using
Power LED Lights with electronic controllers,
900
having even spread and overlaps to avoid
banding and dark spots.
DOUBLE LINER
900
Client:
Front
SINGLE LINER

Tata Elxsi Limited
English Hindi Regional
Keynotes:
6000
Signage Details
Status:
Revision No: 02
Drawing showing the airside elevation showing the location of 3 language sign in relation to the grids. Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.8-S Page 42
Sign Type 1.8
Terminal Buildng Announcer
XXXXX Airport
Notes

details.
Sign Face Artwork
Client:

Tata Elxsi Limited
Keynotes:
XXXXX Airport XXXXX हवाई अड्डा XXXXX िवमानतळ
Signage Details
Status:
Sign Front Elevation Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 1.8-G Page 43
Sign Type 2.1a
Ceiling Hung Directional Sign
50
8 34 8
Principle
2
These sign help direct the movement pattern
of passenger to facilities, and are suspended
25
1
from ceiling.
1. Sign face - Graphics - Plotter cut Blockout
vinyl Pantone Black 6C, vinyl for text Pantone
Typical Aluminium Extrusion Yellow C or Cyan 311C as per graphics, pasted
over 8mm thick White translucent 040 acrylic.
Graphics as per 2.1
2. Sign frame - 50mm wide aluminium
3. Sign Structure extrusion with inbuilt frame to recieve the
sign face. The panel should be made easily
2100
openable for maintainance.
Suspender
3. Sign Structure: Framewrok of aluminium
25mmx 25mm hollow squrae sections
50
Suspender - Stainless steel 25x25mm Hollow

1. Sign face
Plan sections mounted on slabs/beams/walls.
All hardware used for fixing of sign shall be
Stainless steel.
As per site condition

2800
designer. Secret fixing methods should be
used to fix parts together.

Suspender
50 638 25 675 25 638 50 Project: Wayfinding Signage Design
50
50
Client:
3. Sign internal Structure Airport Authority of India

2. Sign frame
Tata Elxsi Limited
780
680
Perspective
Keynotes:
1. Sign Face The final shop drawing for internal
50

2100
Signage Details
Front view Side view
Status:
Revision No: 02
A3 size print

Corrigendum
Sign Type 2.1a
Ceiling Hung Directional Sign
Notes

details.
Client:
2800 mm

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print
Sign Front Elevation Please refer Drg No : 2.1G for Artwork detail (Page 47)
Corrigendum
Sign Type 2.1b-1
Floor Mounted Directional Sign -
2400
with FIDS
100 2200 100
Principle
50
750 750 of passenger to facilities, and are floor
Plan mounted along with airline timings.
5050 638 25 675 25 638 5050
50 150
1. Sign face - Graphics - Plotter cut Blockout vinyl
Pantone Black 6C, vinyl for text Pantone Yellow C
or Cyan 311C as per graphics, pasted over 8mm
thick White translucent 040 acrylic. Graphics as
per 2.1
2. Sign frame - 50mm wide aluminium extrusion
1300
900
with inbuilt frame to recieve the sign face.
The panel should be made easily openable for
1. Sign face maintainance.
3. Sign structure - All structural members in
Stainless steel Hollow box section100x100 brush
finish, base plate embedded below the floor finish
and provided with a floor trim ring. All hardware
150 50
used for fixing of sign shall be Stainless steel.
4. Information panel - FIDS (lcd screen 46”)
mounted on cross ties with brackets designed for
2100 or modular size multiple of 150
the specific sizes.5. Cover Plate: 5mm thk ss cover
plate mounted on flooring. Secret fixing methods
2. Sign Frame
550
should be used to fix parts together.

3. Sign Structure its stability shall be responsibility of the EPC
4100
4100
designer.Lighting: All internal illumination shall be

4. Digital Information panel using Power LED Strip Edge Lights with electronic
controllers, having even spread and overlaps to
avoid banding and dark spots.
50
50
Centre line for FIDS

440
440
2800
Perspective Client:
50
50
46" 46" Cross Tie Member Wayfinding Signage Design Consultant

750 100 750 Tata Elxsi Limited
1400
1166
Keynotes:
900

5.Cover plate
Base Plate
Signage Details
300
Status:
Revision No: 02
Side Elevation Date: 10.10.2017 Scale: Not To Scale

Front Elevation A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1b-1-S Page 50
Please refer Drg No : 2.1G for Artwork detail (Page 47) Sign Type 2.1b-1
Floor Mounted Directional Sign -
with FIDS
Notes

details.
The visual design and digital content of the

screens will be done by specialised agency and
not included in this project scope of work.
Client:
2800 mm

Tata Elxsi Limited
Keynotes:
900 mm
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1b-1-G Page 51
Sign Type 2.1c
Wall Mounted Directional Sign
Principle
2. Sign Structure These sign help direct the movement pattern
of passenger to facilities, and are wall mounted.
50
2100
Plan 1. Sign Face

1. Sign Structure - 50mm wide aluminium
extrusion with inbuilt frame to recieve the
Yellow C or Cyan 311C as per graphics, pasted
Graphics as per 2.1

2100
using Power LED Strip Edge Lights with
50 638 25 675 25 638 50 electronic controllers, having even spread and
50
overlaps to avoid banding and dark spots.
50
1. Sign Face
multiple of 260

780
780
2. Sign Structure consultation and approval from structural
designer.
50

Perspective
2800
Client:

Tata Elxsi Limited
Keynotes:
Floor Finish level
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1c-S Page 58
Sign Type 2.1c
Wall Mounted Directional Sign
Notes

details.
2800 mm
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
Sign Front Elevation Please refer Drg No : 2.1G for Artwork detail (Page 47)
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1c-G Page 59
Sign Type 2.1d
Turn buckle Wall Projected Directional Sign
Principle
of passenger to facilities, and are projecting
from wall.
Detail B Material Specification

50 2100
Plan 2. Sign Structure - 50mm wide aluminium
extrusion with inbuilt frame to recieve the sign
face. The panel should be made easily openable
for maintainance.
All hardware used for fixing of sign shall

be Stainless steel. Projection supported
of small plates 8mm thick and tension rod
Tension Rod with threaded ends and turnbuckles for
min 10 mm dia adjustments. Secret fixing methods should be
used to fix parts together.
450
50 150
multiple of 260
designer.
780
780
385
Power LED Strip Edge Lights with electronic
15050
controllers, having even spread and overlaps to
avoid banding and dark spots.
2100
1. Sign face Project: Wayfinding Signage Design

Perspective
2. Sign Structure Client:

Tata Elxsi Limited
2800
Keynotes:
Floor Finish level

Signage Details
Status:
Front Elevation Side Elevation Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1d-S Page 60
Please refer Drg No : 2.1G for Artwork detail (Page 47) Sign Type 2.1d
Wall Projected Directional Sign
Notes

details.
2800 mm
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.1d-G Page 61
Sign Type 2.2a
Wall Mounted Facility Announcer
Keyholes for fixing the sign
Principle
These signs announce the various facilities and
are mounted on wall.
450
50
Side view
Front view Rear view 1. Sign Face: Graphics - Plotter cut Blockout
2. Sign Frame - 50mm wide aluminium

900 sign face. The panel should be made easily
50
Plan Lighting : All internal illumination shall be using

designer.
1. Sign Face
Perspective
900 or multiplt of 150 50
450
450
2.Sign frame Project: Wayfinding Signage Design

300
Client:

Tata Elxsi Limited
Keynotes:
2400

2100

Signage Details
Floor Finish level Status:
Revision No: 02
Front Elevation Side Elevation Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
900 mm (multiples of 150 after taking artwork width into consideration)
Sign Type 2.2a
60 mm Wall Mounted Facility Announcer
170 mm
450 mm
60 mm
30 mm
शीम शु� कायार्लय सीमा शु� कायार्लय
Customs Office
30 mm
50 mm
50 mm
As per remaining module size 30 30 a/p artwork 50 mm

Notes

Sign Face Artwork Please refer to the structural drawings for
details.

Customs Office
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print
Corrigendum
Sign Type 2.2b
Wall Projected Facility Announcer
Principle
are projecting from wall.
50
50 900
Plan 2. Sign Frame - 50mm wide aluminium

All hardware used for fixing of sign shall be

Stainless steel. Projection supported internally
by side mounting of SS frame.
parts together. The actual structural design of
the sign for its stability shall be responsibility
of the EPC contractor and shall be designed
with due consultation and approval from
structural designer.
1. Sign Face
50 900 or multiple of 150 50 using Power LED Strip Edge Lights with
electronic controllers, having even spread and
450
450
2.Sign frame
Side Elevation Client:


Tata Elxsi Limited
Keynotes:
2400

Perspective
Signage Details
Status:
Floor Finish level
Revision No: 02
A3 size print
Front Elevation
Corrigendum
Sign Type 2.2b
60 mm Wall Projected Facility
Announcer
170 mm
450 mm
60 mm
30 mm
Customs Office
30 mm
50 mm
50 mm
As per remaining module size 30 30 a/p artwork 50 mm
Notes
Sign Face Artwork The artworks are representative only.

details.

Customs Office
Client:

Tata Elxsi Limited
2400 mm
Keynotes:
Signage Details
Status:
Revision No: 02

Corrigendum
Sign Type 2.2c
Door Mounted Facility Announcer
Principle
300 are mounted on door.
1. Sign Structure -25mm wide aluminium
25 extrusion with inbuilt frame to recieve the sign
Front view Rear view face. The panel should be made easily openable
for maintainance.

Side view
600 The actual structural design of the sign for
25
Plan consultation and approval from structural
designer.
1. sign structure
600
300
Client:
2. sign face Airport Authority of India

Tata Elxsi Limited
Keynotes:
1600
Signage Details
Status:
Revision No: 02
Front Elevation Date: 10.10.2017 Scale: Not To Scale
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2c-S Page 68
Sign Type 2.2c
40 mm Door Mounted Facility Announcer
110 mm
300 mm
40 mm
20 mm
Customs Office
20 mm
35 mm
35 mm
As per remaining module size 20 20 a/p artwork 35
Notes
Sign Face Artwork
details.
शीम शु कायालय सीमा शु कायालय Project: Wayfinding Signage Design

Customs Office
Client:

Tata Elxsi Limited
Keynotes:
1600 mm
Signage Details
Status:
Revision No: 02
A3 size print
Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2c-G Page 69
Sign Type 2.2g - 2
Boarding Gates - Wall Projected
Principle
50
900 These sign help identify the boarding
gates(remote or aero bridge).These also include
the FIDS systems.
Plan
1. Sign frame - 50mm wide aluminium
Yellow C or Cyan 311C as per graphics,
pasted over 8mm thick White translucent
040 acrylic.
All hardware used for fixing of sign shall
be Stainless steel. Projection supported
900
50 internally by side mounting of SS frame.
50
parts together.
1000
900
designer.
2, Sign Face
using Power LED Strip Edge Lights with
electronic controllers, having even spread
50
and overlaps to avoid banding and dark

spots.
1. Sign Frame
Support structure Project: Wayfinding Signage Design
Client:
Side Elevation

2400
Tata Elxsi Limited
Keynotes:
Floor Finish level
Signage Details
Status:
Front Elevation
Revision No: 02
Perspective Date: 10.10.2017 Scale: Not To Scale

A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2g-2-S Page 82
Sign Type 2.2g - 2
Boarding Gates - Wall Projected
28A
70 760 mm (as per artwork size) 70
100 mm
340 mm
250 mm
1000 mm
100 mm
200 mm
Notes
25 25 25 25

60 mm details.
65 mm
100 mm
28A
60 mm
900 mm
Sign Face Artwork
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print
Sign Front Elevation Drawn by: RA Checked by: AA
Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2g-2-G Page 83
Sign Type 2.2g - 3
Boarding Gates - Wall Mounted
Principle
These sign help identify the boarding
gates(remote or aero bridge).These also include
the FIDS systems.
2. Sign Frame
1. Sign face: Graphics - Plotter cut Blockout
50
3000 Yellow C or Cyan 311C as per graphics,
pasted over 8mm thick White translucent
Plan 1.Sign Face 040 acrylic.
2. Sign Frame - 50mm wide aluminium
LED 32” display:FIDS/Information Panel-
Digital Panel mounted on cross ties
internally, with brackets designed for the
specified sizes.
1. Sign Face designer.
LED Dynamic Display
3000 Lighting : All internal illumination shall be
700 50 using Power LED Strip Edge Lights with
Perspective
electronic controllers, having even spread
100
and overlaps to avoid banding and dark
400 spots.
600
600
100
100
2. Sign Frame Client:


Tata Elxsi Limited
Keynotes:
2350

Signage Details
Status:
Floor Finish level Revision No: 02
A3 size print
General Notes - • All Dimensions

Front Corrigendum
Elevation are in mm. • All Dimensions are to be read and not measured. • Any Discrepancies must be brought to the notice of the consultant beforeSide
executionI of
- 80
Elevationwork at site. • This drawing must be read in conjunction with all relevant templates and sign schedule
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2g-3-S Page 84
100 mm 100 mm Sign Type 2.2g - 3
Boarding Gates - Wall Mounted
100 mm
As per size of display

100 mm
600 mm
120 mm
300 mm
400 mm
180 mm
600 mm
100 mm
100 mm
100 mm a/p artwork 100 mm a/p artwork 100 mm 150 mm As per size of display Remaining as per display
Notes
Sign Face Artwork The artworks are representative only.

details.
28A
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02

A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2g-3-G Page 85
Sign Type 2.2h
Type 1 Belt No. Sign
1. Sign Face – Entire Sign face all 4 sides, to be made of 8 mm thk
3. Sign Structure
acrylic , with the letters/pictogram to match Pantone Black 6C
and the rest of the vinyl to match Yellow Pantone Yellow C. To be
mounted onto framework using appropriate fixing ties/bolts.
2. Bottom panel – Bottom MS Pane lPU Painted in colour to match Principle
900 Vinyl Black of 95%(Pantone Black 6C).
600 3. Suspender - Stainless steel Hollow section mounted on slabs/ These sign help identify the baggage screening
450 600 beams/walls. machines in the check in areas.It also announce
1. Sign Face
the airline carrier.
All hardware used for fixing of sign shall be Stainless steel.
900
1. Sign Face
1. Sign Face
Secret fixing methods should be used to fix parts together.
600
600
2. Graphic
All internal illumination shall be using Light Guide Panels(preferred)
2. Graphic 450 2. Graphic or LED Strip Edge Lights with electronic controllers, having even
spread and overlaps to avoid banding and dark spots.
Type 2
1. Sign Face - – Entire Sign face all 4 sides, White translucent
040 acrylic, 8mm thk . Graphics - Plotter cut vinyl Pantone Yellow C, Type 3
Blockout vinyl for text Pantone Black 6-C, pasted over acrylic with 1. Sign Face – Entire Sign face all 4 sides, to be made
3. Sign Structure white diffuser film on inside face. of 8mm thk acrylic , with the letters/pictogram to
2. Bottom panel – Bottom MS Panel PU Painted in colour to match Pantone Black 6C and the rest of the vinyl to
match Vinyl Black of 95%(Pantone Black 6C). match Yellow Pantone Yellow C. To be mounted onto
3. Sign structure - All structural members in Stainless steel framework using appropriate fixing ties/bolts.
2700
75x75mm Hollow box section brush finish, base plate embedded 2. Sign structure – Internal Structure of MS, fixed to
below the floor finish and provided with a floor trim ring. All Column using brackets.
hardware used for fixing of sign shall be Stainless steel 3. Bottom panel – Bottom MS Panel PU Painted in
colour to match Vinyl Black of 95%(Pantone Black 6C).
All internal illumination shall be using Light Guide Panels(preferred)
or LED Strip Edge Lights with electronic controllers, having even All internal illumination shall be using Light Guide
spread and overlaps to avoid banding and dark spots. Panels(preferred) or LED Strip Edge Lights with
electronic controllers, having even spread and overlaps
to avoid banding and dark spots.
Plan
Floor Finish level

Front Elevation Front Elevation Front Elevation its stability shall be responsibility of the EPC
designer.
900
600 600
75
600
600
600
900
Client:
Plan - TYPE 1 Plan - TYPE 2 Plan - TYPE 3

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Perspective
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2h-S Page 86
Sign Type 2.2h
900 mm cube
Belt No. Sign
rem a/p art a/p art a/p art 75 mm
150 mm
600 mm cube
rem a/p art a/p art a/p art 35
100 mm
400 mm
900 mm
270 mm
50 mm
600 mm
120 mm
35 mm Notes
10
80 mm 20 mm
50 mm The artworks are representative only.
10
10 mm Please refer to the structural drawings for
30 mm
100 mm
details.
65 mm
Sign Face Artwork Type 1 & 2 Sign Face Artwork Type 3
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print
Type 1 Type 2 Type 3 Drawn by: RA Checked by: AA

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.2h-G Page 87
Sign Type 2.4a
Washroom/Drinking Water/Baby
Care
Principle
These signs identify the key facilities essential
to the passengers.
2. Sign Face
2. Sign Face
Type 1 - Wall Projected
1. Sign Internal Structure -50mm wide aluminium
50
450 face. The panel should be made easily openable for
1. Sign Structure
maintainance.
2. Sign face - Graphics - Plotter cut Blockout vinyl
50
450
Pantone Black 6C, vinyl for text Pantone Yellow C or
Plan 1. Sign Structure Plan
Cyan 311C as per graphics, pasted over 8mm thk acrylic.
All hardware used for fixing of sign shall be Stainless
steel. Projection supported internally by side mounting
of SS frame.
Secret fixing methods should be used to fix parts
together.
Lighting : All internal illumination shall be using Power
LED Lights with electronic controllers, having even spread
and overlaps to avoid banding and dark spots.
Type 2 - Wall Mounted

1. Sign Internal Structure - 50mm wide aluminium
TYPE 2 Wall mounted
face. The panel should be made easily openable for
maintainance.
TYPE 1 - WallProjected
1. Sign Internal 1. Sign Internal Structure 2. Sign Face:Graphics - Plotter cut Blockout vinyl
Structure 50 Pantone Black 6C, vinyl for text Pantone Yellow C or
450
Cyan 311C as per graphics, pasted over 8mmthk acrylic.
2. Sign Face 2. Sign Face Lighting : All internal illumination shall be using Power LED
Lights with electronic controllers, having even spread and
450
450
450

100
50
450
Client:
Perspective
Tata Elxsi Limited
2200
2100
Keynotes:
Finished Floor Level
Signage Details
Status:
Front Elevation: TYPE 2 Wall mounted Side Elevation: TYPE 2 - wall mount Front Elevation: TYPE 1 - WallProjected
Revision No: 02
Type 2 Type 1
A3 size print

Corrigendum
Sign Type 2.4a
450 mm
Washroom/Drinking Water/Baby
Care
60 mm
170 mm
450 mm
45 mm
5 mm
30 mm
30 mm
पु�ष पु�ष
Gents
30 mm
Notes
50 mm
30 mm Please refer to the structural drawings for
details.
30 30 50 mm
Sign Face Artwork
कुमाऊ प्रसाधन
Toilets पु�ष पु�ष
Gents
Client:

Tata Elxsi Limited
Keynotes:
Signage Details
Status:
Revision No: 02

Corrigendum
Sign Type 2.4b
3 250 Service Areas
Principle
These are regulatory signs which the AAI
Pasted with administration would like to communicate and
VHB Sign face keep the passengers and staff informed.
300
eq eq
150
Graphics (V2) Material Specification
1. Sign Face: Digitally printed Graphics pasted

on 3mm thick black acrylic mounted on walls/
calddings/ panelllings using VHB Tape
Side View Front View

Placement on Door Placement on Wall
Door face
Side View
25 25
1550

25 25 25
Client:
150 150
150 AHU
25
25 RESTRICTED
25
25 Wayfinding Signage Design Consultant
25 25
ROOM 25 AREA 25 Tata Elxsi Limited
25 25
Keynotes:
25 25 25 The final shop drawing for internal
ELECTRICAL 25 150 150
25 submitted for approval before production.
ROOM 25 25 25
25 SURVAILANCE
BY CCTV
25
25
25
GARBAGE
COLLECTION
25
25
25 Signage Details
25 25
Status:
Sign face artwork Revision No: 02
A3 size print

Corrigendum
Sign Type 2.5a, 2.5b
3 Statutory Sign
594
Pasted with
VHB Sign face
841
Graphics (V2)
Surface Notes

Side View Front View details.
2.5b - Poster A1 size Portrait 1. Sign Face: Digitally printed Graphics pasted
2.5a - Poster A0 size Landscape
on 3mm thick acrylic mounted on walls/
65 120 mm 52 120 mm 52 120 mm 65 calddings/ panelllings using VHB Tape
30 mm
20 mm Prohibited Goods
40 mm
120 mm
xxx
15 mm
10 mm Narcotic Drugs and Pornographic Counterfeit and
10 mm
10 mm Psychotropic Substance Material Pirated Goods
35 mm Project: Wayfinding Signage Design
736 mm
120 mm Client:
841 mm
841 mm
15 mm
10 mm Antiquities Firearms Maps & Literature with Wayfinding Signage Design Consultant
10 mm
10 mm wrong Indian Boundaries
35 mm Tata Elxsi Limited
Keynotes:
120 mm
15 mm be created by signage contractor and
10 mm Wildlife Products Specified Live Birds Counterfeit Currency,
10 mm
10 mm and Animals Stamps & Coins submitted for approval before production.
80 mm
25 mm Signage Details
105 mm
40 mm Status:
20 mm Airport Authority of India Revision No: 02
20 mm
12 30
594 mm Date: 10.10.2017 Scale: Not To Scale
1189 mm A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.5G-01 Page 108
Sign Type 2.5c, 2.5d, 2.5e
Statutory Sign
2.5c - Poster A2 size Portrait 2.5d - Poster A3 size Portrait 2.5e - Poster A4size Portrait
267 mm
20 380 mm 20 15 15 210 mm
15 mm
25 mm Lorem ipsum 24 mm
10 mm Lorem ipsum
10 mm
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore
magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo
consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est
laborum.Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et
100 mm
100 mm
dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea
commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla
pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim idelit
esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui Notes
officia deserunt mollit anim id est laborum.Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed tempor
25 mm The artworks are representative only.
जरना अधिकार 24 mm
320 mm
10 mm
10 mm 297 mm Please refer to the structural drawings for
जरना अधिकार माहितीवानीज्य काम समाजो प्राण दिशामे विश्वव्यापि प्रतिबध्दता आपको औषधिक कर्य खरिदने सिद्धांत करके(विशेष 24 mm details.
करेसाथ एसेएवं सकते बाजार अनुवादक ढांचामात्रुभाषा थातक बलवान पेदा ध्वनि दिशामे निर्देश गोपनीयता जिम्मे आशाआपस पुष्टिकर्ता
No Smoking
420 mm
संदेश एकएस चुनने आपको प्रेरना आंतरजाल ढांचामात्रुभाषा रखति क्षमता उपलब्ध सार्वजनिक प्रति डाले। व्याख्या अर्थपुर्ण हीकम
प्रदान वेबजाल मुखय बलवान करते भाषाओ अत्यंत बेंगलूरबनाति करेसाथ सोफ़तवेर प्रव्रुति दिये बलवान समस्याओ व्याख्यान
विस्तरणक्षमता बहतर तकनिकल स्वतंत्रता मानव औषधिक दारी पहोच। आवश्यक परिवहन हमेहो। तरीके चाहे लचकनहि व्याख्यान 1. Sign Face: Digitally printed Graphics pasted
धूम्रपान िनषेध
100 mm विश्वव्यापिसुनत वर्णन अनुवाद मुश्किले वर्ष कुशलता करेसाथ करता। पहेला जिसे सहायता एसेएवं माहितीवानीज्य होने विश्लेषण on 3mm thick acrylic mounted on walls/
यन्त्रालय प्रौध्योगिकी हिंदी करके आशाआपस प्राधिकरन मार्गदर्शन विवरन सारांश मुश्किले ध्येय लाभो हमेहो। प्राथमिक नीचे विवरण
calddings/ panelllings using VHB Tape
100 mm
बहतर प्रदान प्रोत्साहित अन्तरराष्ट्रीयकरन मजबुत अनुवादक कार्यलय सुस्पश्ट बहतर भाषाओ बहुत सादगि आशाआपस दिनांक 594 mm
जोवे बलवान एसेएवं सभीकुछ एकत्रित बनाकर लिए। पहोचने सभिसमज मुश्किल पासपाई परिभाषित विस्तरणक्षमता पहोच। किया उन्हे
25 mm
एकएस आशाआपस आंतरजाल अन्तरराष्ट्रीयकरन मुख्य जाता प्रदान वेबजाल समस्याए संदेश जिम्मे बातसमय अविरोधता किके त
धूम्रपान िनषेध
10 mm जरना अधिकार
10 mm
जरना अधिकार माहितीवानीज्य काम समाजो प्राण दिशामे विश्वव्यापि प्रतिबध्दता आपको औषधिक कर्य खरिदने सिद्धांत करके(विशेष
करेसाथ एसेएवं सकते बाजार अनुवादक ढांचामात्रुभाषा थातक बलवान पेदा ध्वनि दिशामे निर्देश गोपनीयता जिम्मे आशाआपस पुष्टिकर्ता
24 mm
संदेश एकएस चुनने आपको प्रेरना आंतरजाल ढांचामात्रुभाषा रखति क्षमता उपलब्ध सार्वजनिक प्रति डाले। व्याख्या अर्थपुर्ण हीकम
प्रदान वेबजाल मुखय बलवान करते भाषाओ अत्यंत बेंगलूरबनाति करेसाथ सोफ़तवेर प्रव्रुति दिये बलवान समस्याओ व्याख्यान
विस्तरणक्षमता बहतर तकनिकल स्वतंत्रता मानव औषधिक दारी पहोच। आवश्यक परिवहन हमेहो। तरीके चाहे लचकनहि व्याख्यान
24 mm
24 mm
100 mm 162 mm
विश्वव्यापिसुनत वर्णन अनुवाद मुश्किले वर्ष कुशलता करेसाथ करता। पहेला जिसे सहायता एसेएवं माहितीवानीज्य होने विश्लेषण
यन्त्रालय प्रौध्योगिकी हिंदी करके आशाआपस प्राधिकरन मार्गदर्शन विवरन सारांश मुश्किले ध्येय लाभो हमेहो। प्राथमिक नीचे विवरण
15 mm
बहतर प्रदान प्रोत्साहित अन्तरराष्ट्रीयकरन मजबुत अनुवादक कार्यलय सुस्पश्ट बहतर भाषाओ बहुत सादगि आशाआपस दिनांक 15 mm
जोवे बलवान एसेएवं सभीकुछ एकत्रित बनाकर लिए। पहोचने सभिसमज मुश्किल पासपाई परिभाषित विस्तरणक्षमता पहोच। किया उन्हे
एकएस आशाआपस आंतरजाल अन्तरराष्ट्रीयकरन मुख्य जाता प्रदान वेबजाल समस्याए संदेश जिम्मे बातसमय अविरोधता किके त
25 mm 40 mm Project: Wayfinding Signage Design

25 mm
15 mm
Client:
64 mm 297 mm
Airport Authority of India Wayfinding Signage Design Consultant
25 mm
Tata Elxsi Limited
420 mm
Keynotes:
Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.5G-02 Page 109
Sign Type 2.6a
Emergency Direction Signs
Illuminated
Principle
Internally illuminated signs for

3. Sign fixing making the emergency escape
routes
openings with glass for Suspended

Projected
light wash on wall and below signs Face mounted
Perspective
1. Sign Frame - 1.5mm CRCA MS powder
1. Sign frame coated white
2. Sign face
675 80 2. Sign Face - Laminated acrylic 6mm
thick with graphics in white and green
transluscent vinyl on the inside face of the
10 glass
255
3. Illumination : All Internal illumination
usingLED lamps connected to a UPS with
a min 1.5hr backup
10
Front Side
4. Sign Fixing - Suspenders and projecting
openings with glass for pipes shall be stainless steel to match
light wash on wall and below signs other similar hardware 35mm dia.
100
The actual structural design of the sign
for its stability shall be responsibility of
Note: the EPC contractor and shall be designed
80
40
Both 6.1a and 6.1b will be fabricated with due consultation and approval from
using same details
Top 125 125 Perspective structural designer.
2.6a-1
KEY
Suspended
Projected
Floor mounted
Face mounted
c d e f
Orientation of the sign Size : 675 x 255mm Size : 675 x 255mm Size : 675 x 255mm Size : 675 x 255mm Client:
Protuding line out of the circle indi-
cates the orientiation of the sign. Airport Authority of India

Highlighted area denotes the orienta-
tion of the sign. Tata Elxsi Limited
Keynotes:
Double sided sign:
Represented by a sign symbol with 2
aS bS gS hS
alphabets (denoting the artwork from
ones given below) on either side
Size : 530 x 255mm Size : 530x 255mm Size : 530 x 255mm Size : 530 x 255mm The final shop drawing for internal
XY
X
2.6a-2 be created by signage contractor and
Y
Single sided sign:
Signage Details
Represented by a sign symbol with 1
alphabet (denoting the artwork from
ones given below)
X
Status:
X
EE
Size : 900 x 225mm Revision No: 02
X X
Notes :
Wall
1. All the signs coming in retail area should not be blocked. They can be moved within the vicinity of 1m - 2 m as per the correct escape route.
A3 size print

Corrigendum
Sign Type 2.6b
Emergency Signs -
Photoluminiscent Signs
Principle
Principles for fire signing - 2.6b
These signs glow in dark in case of
1. Signs not shown on GA drawing 2. Signs not shown on GA drawing no lights in case of power failure.
All 2.6b-1 signs shall be placed next to 2.6b-5 and 6 shall be printed with
2.6b-1 Fire equipment signs 2.6b-2 Fire doors inside 2.6b-2 shall be pasted on all the emer-
the respective equipment at a promi- all arrows directions and placed
gency escape doors with the Push bar
nently visible location at 1.5m form the Push handle down to open the door walls along the escape route
activating the alarm system, 75mm
Finished floor level 700 x 95
above the push bar installation. Material Specification
2.6b-3 Fire doors outside 2.6b-4 At lifts All signs are screen printed using artworks
Fire
Fire hose Fire alarm
Fire call
In case of fire
2.6b-3 shall be pasted on outer side of provided and with photoluminiscent
extingusiher point
A4P A4P A4P A4P
all the emergency doors with push bar material as per technical specifications.
at an height of 1.5m from finished floor Screen printing shall be done on self
adhesive vinyl and pasted on 2mm thick
level
powdercoated white aluminium plate and
Emergency exit Do not use
Keep clear lifts or escalators fixed at location using screws.
A4P
2.6b-4 shall be pasted on glass/wall At locations with available flat and non-
Fire call Use Stairs next to elevator on the opposite side of porus surfaces the printed vinyl can be
Ladder applied directly.
point A3P
the call button at 1.5m from finished
A4P A4P All sizes are graphic sizes excluding sign frame floor level Sign placement
All sizes are graphic sizes excluding sign frame
2.6b-1 at 1.5m above finished floor near
equipment at visible place
2.6b-2 On door just above the push bar
2.6b-3 On the door centrally at 1.2m /below
3. Signs not shown on GA drawing glass window
2.6b-4 On side walls of lifts above call
All 2.6b-5 signs will be positioned along the
2.6b-5 button panel at 1.5m above Finished floor
escape routes to ensure that the route is 2.6b-5 Along long corridors spaced 3m and
clearly marked. This means - signs placed straggered on opposite
appropriatly directing the escape path at walls. 1.2m above finished floor
every junction or change of direction on Fire plans- End long corridors and every
that route. If a long straight corridor or space change in direction on wall 1.2m above
finished floor on either side
is part of an escape route then it is usual to
place repeater exit signs, at around 2.0 - 2.5 Project: Wayfinding Signage Design
meter spacing. Signs are placed at a height
above head-height so they can be clearly Client:
seen and will need to be above the height of Airport Authority of India
doorways (at least 2.1m).
Tata Elxsi Limited
Keynotes:
Note: Photoluminiscent signs are not given structure and sign fabrication shall
any unique number and also not shown in the be created by signage contractor and
Schedule and marked in GA drawings. These submitted for approval before production.
will be provided across the terminal basis using
principles as elaborated. Signage Details
Status:
Revision No: 02
A3 size print

Corrigendum
Sign Type 2.6d
Principles for fire signing - 2.6d
Emergency Signs - Fire Life Safety
Fire plans
Layout
Fire safety plans : Recommended for the awarness of passengers
and airport staff by informing the fire policy, locations of fire
Emergency Exit
fighting equipments, alarms and access to nearest escape stair- Principle

case.
Printed layouts placed at prominent
Fire ladder
Wheel chair
Placement locations across all the levels of

In passenger areas : Near frequently visited areas like toilets and airport.
prominently visible in large areas with seating or waiting and at
high movement areas like escalators and staircases. On Level
L1 Level Plan 1and 2 these are also placed near the access to the fire escape
staircases. Material Specification
In Staff areas : Near toilets and at the access doors in long corri-
dors. All signs are digitally printed using
In Fire escape staircase : At Level L0 before exiting as reference for artworks made specific to each
path to assembly areas locatino. Laminated Digital prints
on photoluminiscent self adhesive
film mounted on 3mm thick white
acrylic plate.
At location with available flat and
non-porous surfaces like glass
Emergency Exit
laminate panels, cladding- the
Emergency Exit
printed vinyl can be applied directly
Fire ladder Artworks : The artworks will have to

Wheel chair be made by the execution agency
Fire ladder using inputs from consultants who
Wheel chair have designed the emergency
evacuation routs & firefighting
equipment location.
L1 Level Plan
Client:

L1 Level Plan
Tata Elxsi Limited
Keynotes:
Artwork : Procedure to prepare Fire plans
As built architectural drawings should be used as background. submitted for approval before production.
The Drawings should show all the doors and the furniture layout and should not have any text.
Identify the location of the plan in the map.
Rotate the drawing in the fire plan in such a way that the orientation in the drawing matches to Signage Details
that of the location where it is placed. Status:
Mark out the two nearest fire exists from that plan location using Green arrows. Revision No: 02
Show the fire exit stairs and all fire fighting equipment on the floor. Date: 10.10.2017 Scale: Not To Scale
Ensure updating the phone numbers and details after taking the details from the Airport Team. A3 size print

Corrigendum
drawings. • This drawing is the sole property of AAI. It should not be copied/reproduced in any manner without permission of AAI. Drg No 2.6d-G Page 115
NOTES
The drawing is indicative in nature and detailed
design / GFC drawings shall be submitted by the
successful bidder before start of physical
execution on site.
M CITY 15 m WIDE CIVIL AIRPORT ROAD

15 m WIDE CIVIL
ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

BOUNDARY WALL
OPEN MUNICIPAL DRAIN
OPEN MUNICIPAL DRAIN OPEN MUNICIPAL DRAIN
BOUNDARY WALL OPEN MUNICIPAL DRAIN
AIRPORT ROAD LEGEND
X X X
X X X X X X X X X X X X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X
X X X X X X
X X X X
X X X X X X X X X
X X X X X X X X X X X X X X X X X
ROAD 9.0 M WIDE ROAD 9.0 M WIDE
X X X X X X X
EXISTING BOUNDARY WALL
6M WIDE DRIVEWAY
ROAD 3.75 M WIDE ROAD 3.75 M WIDE ROAD 3.75 M WIDE
6M WIDE DRIVEWAY
EXIT
ROAD 3.75 M WIDE
ROAD 3.75 M WIDE

ROAD 3.75 M WIDE
ROAD 3.75 M WIDE

ROAD 3.75 M WIDE
ROAD 3.75 M WIDE

CITYSIDE BOUNDARY WALL TO BE
6M WIDE DRIVEWAY
ROAD 3.75 M WIDE ROAD 3.75 M WIDE ROAD 3.75 M WIDE BUILT IN PHASE 1 AFTER
DEMOLITION OF EXISTING
ENTRY ROAD 3.75 M WIDE ROAD 3.75 M WIDE ROAD 3.75 M WIDE
ROAD 4.0 M WIDE ROAD 3.75 M WIDE ROAD 3.75 M WIDE ROAD 3.75 M WIDE
BOUNDARY WALL
ROAD 4.0 M WIDE
8M WIDE DRIVEWAY
X X
D.G. SET
D.G. SET
D.G. SET
X
PROPOSED BOUNDARY WALL
D.G. SET
TRUCK UNLOADING
PLATFORM
(3000 x 6000)
X
TO BE BUILT IN PHASE 1
X
UP
ESS
X
16M WIDE DRIVEWAY
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
X
X
PROPOSED ROAD TO BE
TRANSFORMER TRANSFORMER-3 TRANSFORMER-2 TRANSFORMER-1
FUTURE
X
X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X
BUILT IN PHASE 1
8M WIDE DRIVEWAY
X
X X X X X X X X X X X X X X X X X X X
TERMINAL BUILDING TO BE
BUILT IN PHASE 1
X
X
X
COMMERCIAL (ONLY
X
X
INDICATIVE)
DN DN DN DN
X
X
X
AIRPORT SERVICES TO BE
X
X
BUILT IN PHASE - 1
X
X
13 12 11 10
X
9 8 7 6 5 4 3 2 1 AIRPORT SERVICES TO BE
BOUNDARY WALL
X
PW100 PW100
X
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
BUILT IN PHASE - 2
X
(ONLY INDICATIVE)
X
X
ATR 72-500
ATR 72-500
X
MLCP (ONLY INDICATIVE)

X
X
-200
-200 A321 -200
-200
-200
-200 -200
A321 A321
A321
A321
A321 -200 A321
A321
X
GREEN AREA
PROPOSED SECURITY CHECK

POST 10 SQ.M. EACH TO BE
BUILT IN PHASE 1
PROPOSED SHOULDER 7.5 M WIDE R10.2204R23.9002
10.2204
26.0000
BOUNDARY WALL BOUNDARY WALL

REV. DESCRIPTION DATE CHD.
50.0047
AMENDMENT
c ti on PROJECT :
r u
K1
on s t
c
23.0000
nd e r
Tax
K3 u Development of Jodhpur
i FILLET 2
Taxi Airport.
i
ink
x R23
Ta
.9M
L
R23.9M
FILLET 4
K
CLIENT :
R23 FILLET 3
.9M
c ti o n
.9M t r u
R23.9M
R2
3 FILLET 6
c on s FILLET 5
r
K 3 unde
Tax i
Link ARCHITECTURAL & ENGINEERING CONSULTANTS :
K1
Tax
STHAPATI ASSOCIATES (P) LTD.
Architects, Engineers, Interior designers, Project Management Consultants
i
Lucknow Studio : 1/24, Vipul Khand, Gomti Nagar, Lucknow - 226010
FILLET 7
i K3
Delhi Studio : T - 34/ 302, Common Wealth Games Village, Delhi - 110092
R23
Ph no. 0522 - 4027793, 011 - 21211409
a x
.
T
9M
g L ink
isti n DRAWING TITLE: NORTH:
Ex N
LAND USE PLAN

i
DISCIPLINE:
x
ARCHITECTURE DRAWING
Ta
STATUS:
TENDER DRAWING
K
DRAWING NO. SAPL / JDH / TD / AR / LUP
SCALE NTS SHEET NO 01
Corrigendum I - 92
Y
SHEET SIZE A1 DATED 10-11-2022
NOTES
execution on site.

15 m WIDE CIVIL
ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

BOUNDARY WALL
AIRPORT ROAD
X X X
X X X X X X
X X X X
X X X X X X X X X
X X X X X X X
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
EXIT

6M WIDE DRIVEWAY
LEGEND
ROAD 4.0 M WIDE
8M WIDE DRIVEWAY
X X
D.G. SET
D.G. SET
D.G. SET
X
D.G. SET
TRUCK UNLOADING
PLATFORM
(3000 x 6000)
X
X
UP
X
16M WIDE DRIVEWAY
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
X
X
BUILT IN PHASE 1 AFTER
FUTURE
X
X
8M WIDE DRIVEWAY BOUNDARY WALL
X

X
X
X
X
X
DN DN DN DN
X
X
X
X
X
X
X
13 12 11 10
9
X
8 7 6 5 4 3 2 1
BOUNDARY WALL
X
PW100 PW100
X
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
X
X
X
ATR 72-500
ATR 72-500
X
X
-200
X
-200 A321 -200

-200
-200
-200 -200
A321 A321
A321
A321
A321 -200 A321
A321
X
10.2204
26.0000

50.0047
AMENDMENT
c ti on PROJECT :
r u
K1
on s t
c
23.0000
nd e r
Tax
i FILLET 2
Taxi Airport.
i
ink
x R23
Ta
.9M
L
R23.9M
FILLET 4
K
CLIENT :
R23 FILLET 3
.9M
c ti o n
.9M t r u
R23.9M
R2
3 FILLET 6
c on s FILLET 5
r
K 3 unde
Tax i
K1
Tax
i
FILLET 7
i K3
R23
Ph no. 0522 - 4027793, 011 - 21211409
a x
.
T
9M
g L ink
Ex N
SITE PLAN
i
DISCIPLINE:
x
Ta
STATUS:
TENDER DRAWING
K
DRAWING NO. SAPL / JDH / TD / AR / SP
Corrigendum I - 93
Y
NOTES
execution on site.

15 m WIDE CIVIL
ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

BOUNDARY WALL
AIRPORT ROAD
X X X
X X X X X X
X X X X
X X X X X X X X X
X X X X X X X
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
EXIT

6M WIDE DRIVEWAY
ROAD 4.0 M WIDE
8M WIDE DRIVEWAY
X X
D.G. SET
D.G. SET
D.G. SET
X
D.G. SET
TRUCK UNLOADING
PLATFORM
(3000 x 6000)
X
X
UP
X
16M WIDE DRIVEWAY
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
X
X
LEGEND
FUTURE
X
X
X
8M WIDE DRIVEWAY
X
X

X
X

X
X
DN DN DN DN
X
BOUNDARY WALL
X
X
X
X

X
X
13 12 11 10
9
X
8 7 6 5 4 3 2 1 BOUNDARY
X
PW100 PW100
X
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
WALL
X
X
X
ATR 72-500
ATR 72-500
X
X
-200
X
-200 A321 -200

-200
-200
-200 -200
A321 A321
A321
A321
A321 -200 A321
A321
X
10.2204
26.0000

50.0047
AMENDMENT
c ti on PROJECT :
r u
K1
on s t
c
23.0000
nd e r
Tax
i FILLET 2
Taxi Airport.
i
ink
x R23
Ta
.9M
L
R23.9M
FILLET 4
K
CLIENT :
R23 FILLET 3
.9M
c ti o n
.9M t r u
R23.9M
R2
3 FILLET 6
c on s FILLET 5
r
K 3 unde
Tax i
K1
Tax
i
FILLET 7
i K3
R23
Ph no. 0522 - 4027793, 011 - 21211409
a x
.
T
9M
g L ink
Ex N
MASTER PLAN
i
DISCIPLINE:
x
Ta
STATUS:
TENDER DRAWING
K
DRAWING NO. SAPL / JDH / TD / AR / MP
Corrigendum I - 94
Y
M CITY 15 m WIDE CIVIL AIRPORT ROAD 51.9M
15 m WIDE CIVIL
20.9M
ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

ROAD 4.0 M WIDE
ROAD 4.0 M WIDE

BOUNDARY WALL
BOUNDARY WALL OPEN MUNICIPAL DRAIN 352.8M AIRPORT ROAD
38.9M 31.0M OPEN MUNICIPAL DRAIN
61 . 0 M
X
X
X
X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X
X X X X X X X X X X X X X X X X
X
X X X X X X X
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
EXIT

6M WIDE DRIVEWAY
ROAD 4.0 M WIDE
8M WIDE DRIVEWAY
X X
72.1
D.G. SET
D.G. SET
D.G. SET
X
D.G. SET
TRUCK UNLOADING
PLATFORM
(3000 x 6000)
143.8M
X
X
UP
X
M
16M WIDE DRIVEWAY
6M WIDE DRIVEWAY
6M WIDE DRIVEWAY
X
X
FUTURE
X
X
8M WIDE DRIVEWAY
54.4M
X
X
X
X
X
X
DN DN DN DN
X
X
X
X
X
429.0M
X
X
13 12 11 10
9
X
8 7 6 5 4 3 2 1
BOUNDARY WALL
X
PW100 PW100
X
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
X
X
TERMINAL BUILDING TO
X
ATR 72-500
ATR 72-500
X
BE BUILT IN PHASE 1
X
-200
X
-200 A321 -200

-200
-200
-200 -200
A321 A321
A321
A321
A321 -200 A321
A321
X
3 M HIGH
BARRICADING
6 M HIGH
BARRICADING
10.2204
26.0000

50.0047
AMENDMENT
c ti on PROJECT :
r u
K1
on s t
c
23.0000
nd e r
Tax
i FILLET 2
Taxi Airport.
i
ink
x R23
Ta
.9M
L
R23.9M
FILLET 4
K
CLIENT :
R23 FILLET 3
.9M
c ti o n
.9M t r u
R23.9M
R2
3 FILLET 6
c on s FILLET 5
r
K 3 unde
Tax i
K1
Tax
i
FILLET 7
i K3
R23
Ph no. 0522 - 4027793, 011 - 21211409
a x
.
T
9M
g L ink
Ex N
Site Barricading Layout
PHASE - 1
i
DISCIPLINE:
x
Ta
STATUS:
TENDER DRAWING
K
DRAWING NO. SP
SAPL / JDH / TD / AR / SB
Corrigendum I - 95
Y
NOTES
execution on site.
15 m WIDE CIVIL AIRPORT ROAD

15 m WIDE CIVIL
AIRPORT ROAD
TO CITY DRAINAGE MHS
TO CITY DRAINAGE TO CITY DRAINAGE

STORM WATER LINE STORM WATER LINE
STORM WATER LINE TO CITY DRAINAGE
MHS

MHS MHS MHS MHS MHS
R.W.H MHS
MHS MHS
R.W.H R.W.H R.W.H
MHS
MHS MHS
MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS
MHS
STORM WATER LINE STORM WATER LINE STORM WATER LINE STORM WATER LINE STORM WATER LINE
R.W.H
MHS
MHS MHS
MHS MHS
MHS
MHS
MHS
STORM WATER LINE MHS
STORM WATER LINE

STORM WATER LINE R.W.H
MHS MHS MHS MHS MHS MHS MHS MHS MHS
R.W.H MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS MHS
MHS
MHS
MHS
STORM WATER LINE STORM WATER LINE STORM WATER LINE STORM WATER LINE STORM WATER LINE
LEGEND
MHS
MHS
R.W.H
R.W.H
278.3M
MHS
MHS X1 X2 X3 X4 X5 X6
D.G. SET (1250 KVA)
D.G. SET (1250 KVA)
D.G. SET (1250 KVA)

MHS MHS
(WITH CANOPY)
(WITH CANOPY)
(WITH CANOPY)
D.G. SET (500 KVA)
(WITH CANOPY)
STORM WATER LINE
MHS
MHS
DOMESTIC WATER RISER Y1
Y2
TOILET
STORM WATER LINE STORM WATER LINE FLUSHING WATER RISER
FUTURE PANEL DG PANEL
OFFICE
STORM WATER LINE

REST ROOM UP
MHS
D2 D2
MHS Y3
UP D2
LT PANEL ROOM
R.W.H
PROJECTION 600 MM
WIDE
R.W.H HT.PANEL ROOM CAP. PANEL CAP. PANEL CAP. PANEL CAP. PANEL
3.6 M WIDE RAMP

SLOPE 1:4.5
MHS
Y4
HT VCB
HT VCB
HT VCB
HT VCB
HT VCB
HT VCB
SLOPE
MHS
MAIN L.T. PANEL
Y5
SLOPE
T/X ROOM T/X ROOM T/X ROOM T/X ROOM
750MM PLINTH
750MM PLINTH PROTECTION
PROTECTION
TRANSFORMER TRANSFORMER TRANSFORMER-2 TRANSFORMER-1
OUTDOOR TYPE OUTDOOR TYPE OUTDOOR TYPE OUTDOOR TYPE
FUTURE FUTURE 1600 KVA 1600 KVA
(OPEN TO SKY) (OPEN TO SKY) (OPEN TO SKY) (OPEN TO SKY)
CHAIN LINK FENCING

SLOPE

MHS SLOPE
MHS
SLOPE
SLOPE
SLOPE
BRICK BLOCK WALL &
STORM WATER LINE

FINISHES AS PER SCHEDULE
PROJECTION 600 MM PROJECTION 600 MM PROJECTION 600 MM
WIDE WIDE WIDE
3.6 M WIDE RAMP 3.6 M WIDE RAMP 3.6 M WIDE RAMP 3.6 M WIDE RAMP
R.W.H
SLOPE 1:4.5 SLOPE 1:4.5 SLOPE 1:4.5 SLOPE 1:4.5
MHS
MHS MHS MHS
MHS
BOUNDARY WALL
MHS
MHS
MHS
STORM WATER LINE

STORM WATER LINE
MHS
MHS MHS MHS MHS MHS MHS MHS MHS
MHS MHS MHS MHS MHS

R.W.H MHS MHS MHS MHS
R.W.H MHS MHS MHS R.W.H MHS
MHS MHS MHS
STP
MHS
MHS MHS MHS MHS MHS

STORM WATER LINE STORM WATER LINE SEWERAGE LINE STORM WATER LINE SEWERAGE LINE STORM WATER LINE MHS MHS
X
MHS

STORM WATER LINE SEWERAGE LINE
FIRE HYDRANT & SPRINKLER PIPE
MHS
MHS
MHS
R.W.H
STORM WATER LINE

13 12 11 10 MHS
MHS
PW100 PW100
9 8 7 6 5 4 3 2 1
BOUNDARY WALL
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
CFM56-5B CFM56-5B
MHS CFM56-5B CFM56-5B
MHS
ATR 72-500
ATR 72-500
STORM WATER LINE
0 0 0 MHS
-20
200 A321 200
-20
200
-20 0
A321- A321 -20
A321- A321 200
MHS A321- A321-
A321
R.W.H
MHS
MHS
MHS
MHS
STORM WATER LINE MHS
STORM WATER LINE STORM WATER LINE R.W.H

MHS MHS MHS MHS MHS R.W.H MHS MHS MHS MHS MHS
MHS MHS MHS MHS MHS MHS MHS
10.2204
26.0000

50.0047
c tio n
ru
K1
ns t
co DESCRIPTION DATE CHD.
23.0000
d e r AMENDMENT
un
Tax
a x i K3 PROJECT :
Development of Jodhpur
ink T
FILLET 2
i
i
x
R23
Ta
.9M
L Airport.
R23.9M
FILLET 4
K
CLIENT :
R23 FILLET 3
.9M
u c t ion
M r
onst
R23.9M
3.9FILLET 6 FILLET 5
R2
n der c
i K 3u
a x
ink T
ARCHITECTURAL & ENGINEERING CONSULTANTS :
K1
STHAPATI
Tax
ASSOCIATES (P) LTD.
i
FILLET 7 Ph no. 0522 - 4027793, 011 - 21211409
K3
R23
a x i
.9M
L ink T DRAWING TITLE: NORTH:
x i sting
E MASTER PLAN N
EXTERNAL LAYOUT
DISCIPLINE:
i
PLUMBING DRAWING
x
Ta
STATUS:
TENDER DRAWING
K
DRAWING NO. SAPL / JDH / TD / PL / MP / 01
AY
Corrigendum I - 96
NOTES
execution on site.

AMENDMENT
PROJECT :
Airport.
CLIENT :


Ph no. 0522 - 4027793, 011 - 21211409
DRAWING TITLE: NORTH:
SCHEDULE
OF
FINISHES
DISCIPLINE:
STATUS:
TENDER DRAWING
DRAWING NO. SAPL / JDH / TD / AR / SOF-01

Corrigendum I - 97
KEY PLAN :
FROM CITY
A321-200
A321-200 A321-200
A321-200
A321-200
A321-200 A321-200
A321-200
PROPOSED SHOULDER 7.5 M WIDE
ction
K1
nstru
der co
FILLET 1
Tax
K3 un 23
FILLET 2
Taxi
i
FILLET 4
Link
FILLET 3
FILLET 6 FILLET 5
K1
Tax
i
FILLET 7
B' NOTE :
execution on site.
LEGEND
A A' DURANTA
SONELI
BOUGAINVILLEA
PALM TREE
B
DATE PALM
CHLOROPHYTUM LAXUM
LANDSCAPE PLAN
1. IVORY CREME GRANITE 4. GRASSCRETE

AMENDMENT
PROJECT :
1 4 Development of Jodhpur
Airport.
3
CLIENT :
5. STONE BENCHES
FOR LANDSCAPE
2. COBBLE STONE FURNITURE
5 ARCHITECTURAL & ENGINEERING CONSULTANTS :
2 STHAPATI

ASSOCIATES (P) LTD.
Ph no. 0522 - 4027793, 011 - 21211409
3. MOSAIC TILE FOR

SWIMMING POOL DRAWING TITLE: NORTH:
LANDSCAPE PLAN
BLOWUP DISCIPLINE:
STATUS:
TENDER DRAWING
DRAWING NO. SAPL / JDH / TD / AR / LND / 01

Corrigendum I - 98
KEY PLAN :
FROM CITY
A321-200
A321-200 A321-200
A321-200
A321-200
A321-200 A321-200
A321-200
PROPOSED SHOULDER 7.5 M WIDE
ction
K1
nstru
der co
FILLET 1
Tax
K3 un 23
FILLET 2
Taxi
i
FILLET 4
Link
FILLET 3
FILLET 6 FILLET 5
K1
Tax
i
FILLET 7
NOTE :
execution on site.
B'
LEGEND
DURANTA
SONELI
BOUGAINVILLEA
PALM TREE
A A'
DATE PALM
CHLOROPHYTUM LAXUM
PLAN
DETAIL X
SECTION A-A'
AMENDMENT
PROJECT :
Airport.
CLIENT :
JODHPUR SANDSTONE AS PER SPEC.
20MM THICK MORTAR

100 MM THICK PCC AS PER STRUCTURE
JODHPUR SANDSTONE AS PER SPEC.
150 MM THICK HARDCORE
20MM THICK MORTAR
100 MM THICK PCC AS PER STRUCTURE
150 MM THICK HARDCORE
M.S DRAIN
COVERING GRID JODHPUR SANDSTONE AS PER SPEC.
DRAIN 20MM THICK MORTAR STHAPATI

ASSOCIATES (P) LTD.
300 X 150
100 MM THICK PCC AS PER STRUCTURE Lucknow Studio : 1/24, Vipul Khand, Gomti Nagar, Lucknow - 226010
150 MM THICK HARDCORE Ph no. 0522 - 4027793, 011 - 21211409
SLOPE
DRAWING TITLE: NORTH:

KERB STONE AS PER SAMPLE
LANDSCAPE SECTION
SECTION B-B'
DISCIPLINE:
STATUS:
TENDER DRAWING
DRAWING NO. SAPL / JDH / TD / AR / LND / 02
Corrigendum I - 99 DETAIL AT-X SCALE
SHEET SIZE
NTS
A1
SHEET NO
DATED
02
15-11-2022
Corrigendum I - 100
73° 2' 49" E 73° 2' 51" E 73° 2' 53" E 73° 2' 55" E 73° 2' 56" E 73° 2' 58" E 73° 3' 0" E 73° 3' 2" E 73° 3' 4" E 73° 3' 5" E 73° 3' 7" E 73° 3' 9" E 73° 3' 11" E 73° 3' 13" E 73° 3' 14" E 73° 3' 16" E 73° 3' 18" E 73° 3' 20" E
SURVEY PLAN AT JODHPUR AIRPORT

26° 15' 56" N
N
26° 15' 56" N

W E
<< TO JODHPUR CIT

Y 215
.74
4
216
.08
5
216
.42
6
.76
7
.91
2
.75
4 8
216 216 .73 .72
2
26° 15' 54" N
216 5 9
216 216 .70 .68 .67
1 8
6 4 5 216 216 216 .63 .63
8
.64
14 .6 5 .00 .3 4 6
.6 9 6 216 216 216
2 21 215 215 1 6 .0 8 .4 83 8 7 9 4 2 3
2 216 2 16. 1 6 .9 6 .70 .6 9 4
.6 7 8 1 5
.28
7 3 2 21 216 216 .66 .64 .62
5 4
.96
NALA (MUNICIPAL DR 216

9 .58 9
215 213 .35 .75
5
.15
2 8 216 216 216 .58 .57
7
.58
7
214 214 215 .54 .94
4 1 216 216 .54
1
215 215 .34 .73
7
.88
8 22 216 216
216 216 1
AIN)
1 6 .8 7 0 5 4
4
2 216 2 16. 2 1 6 .6
6 . 6 3
.6 1 7
.6 0 2 9 8
.67 .79
7
.01
21 216 216 .57 .53 .53
3 3
214 214 215 .40
6
.80
2 9 216 216 216 .53 .51
5
.53
2 6
215 215 .19 .59
5 1 216 216 .48
26° 15' 54" N

216 216 .82 .78
2
705 2 216 216
216 216 16. 6 .67 . 5 63 . 5 9 7 3 7
5 2 2 1 2 16 1 6 6 .5 . 56 3 3 2 .93 .97
7
.04
1 2
. 5 3
.6 8 5
.80
8 6 2 2 1 21 6
216
.5 .4 9
.47
7
484 215 215 216 .05 .06
3
.05
1
215 215 215 .92 .05
6
453 216 216 16. 6.4
71
.46
1 76 216 216 .01
3
.97
4 8
215 1 6 6 . .7 28 1 8 4 2 2 1 1 6 6 . 4 4 3 1 216 216 215 .85 .84
4
2 21 216 216
.7
1 6 .6 7
6 .5 8 9
. 5 4 2 2 2 6
2 21 2 16 .
2 1 7 215 215
BM 2 21 2 16 1 6 .5 6 . 49 . 5 2 9 1 7 7 1 5 .8 5 . 84 . 9 9 6 7 4 4
.37 7 -
74 4 6 2 21 2 16 1 6. 5 .4 8
. 4 4 6 2 8 2 21 2 15 1 5. 9 .9 5 . 98 5 1
6 RL-2 .5 6 9 9 6 4 2 1 6 6 . 4 2 7 2 1 5 5 . 0 0 3 7 5
21 216 17.1237 16. .7 .75 7 2 21 216 .4 .42 .41 2 21 216 216
. .92 .88
5 6 .63 .66
6
216 216 .65 .62
9
.56
8 216 216 216 .41 .42
1 7 215 215 .77 .76
2 8 215 .71
6
.67
1 4
216 216 .49
9
.41
3 9 216 216 .37 2 215 215 .71 215 215 215 .40 .23
3 6
216 216 216 .37 . 37 7 1 216 .75 . 79 6 1 215 215 214 .98 .28
4
.58
1 9
2 1 6
21 6
16 . 3 .4 1 1
42 7 0 6 4 2 1 5
21 5 5 . 7 .0 7 3
04 3 7 2 213 214 214 .87 .17
6
.49
5
6.8 0 2
.7 2 3 08 1
2 2 1 6
21 6 .
16 . 4
6. 3 6
.3 1 7
2 9 2 9 4 6
2 1 2 1 6
21 6 .
2 1 5 . 9
5. 9 6
.0 4 2
. 01 0 6 6 91 2 214 215 215
1 6 . 6 5 3 6 8 2 2 1 1 6 6. . 2 7 8 2 1 1 6 6 . 9 8 7 5 . 4 5 2 7 5 8
2 21 216 216
.
1 6 .4 . 6 44 4 73 0 9 6
2 21 2 16 1 6 .2 6 .26 .3 36 3 1 7 1 DISCOM D.O.
2 9 7
2 21 2 1 5 1 5 .7 5 . 69 . 7 23 7 6 1 2 1 2 1 5. 1 5 .5 5 . 6 2
. 6 9 1 3 4 3
2 6 . .3 4 8 2 1 16 6. 2 6 5 .6 68 3 2 1 15 . 9 5 2 1 5 .2 4 15
21 216 2 1 6
21 6 .2 .1 9 1 7 2 3 5
2 2 2 1 1 6 .2 6 .1 . 1 1 3
.0 7 6 3 2 1 5
21 5 . .7 3 7 0 4 1 4 2
2 2 2 1 5
1 5 .5 5 . 5 7 2 2 1 2 1 5 1 4 . 0
3 . 2 . 5 1 3
.8 1 8
216 216
.
216
.2 .29 .31
2 5 2 21 216 216 .09 .02 .94
2 7 215 215
.
215
.9 .14 .08 7 8 MAIN
2 21 2 21 213 213 .10 .40
5 2
216 .28 .25 2 216 216 .87 6 216 216 .12 .95 6 GATE 75 214 214 .95 .36 3
216
TO SIKARGARH >>
.59
2 8 216 216 .21 .16
8 3 215 215 .87 .89
7
.87
2 216 .03 8 .34
7 2 214 215 .33
216 .52 .48
2
.50
1 216 216 .13 114 95 215 215 .83
2
773 09 215 216 215
.9 .84 858 18 215 .38 .43
1
659 15 215
216 216 .49
1
.45 19 216 16. 6.0 .25
6
201 215 215 15. 5.7 .68
7 26 .52
9
564 22 215 15. 5.6 .68
4
849 215 215 15. 5.5 .62
7 53
216 216 1 6 6 . 4 . 2 9 6 4 4 4 2 2 1 2 1 6 1 6 . .1 06
0 0 3 3 7 9 2 2 1 1 5 5 . 6 5 .6 .5 9 2 1 2 1 5 1 5 . 5 .6 .6 76 4 7 8 2 2 1 2 1 5 5 . . 5 7 9
4 6 4 7 3 7 2 2 1 1 5 5 . 1 . 8 7 4 6 1 2
2 21 216 1 6 .2 6 .2 6
.2 4 4 2 9 4 2 2 16 2 1 6. 5 .9 . 8 7 9 4 7 7 7 9
2 2 1 2 1 1 5 5 . 61 .5 75 8 4 5 2 2 1 2 1 5 1 5 .6 5 . 6 1 . 1 2 BM - 15 2 21 2 15 2 1 5. 5 .4 . 4 0 2 2 1 2 1 3 1 2 .6 2 . 74 . 0 39 9 4 4
2 21 216 . 2 5 1 2 1 21 5 . .8 .89 9 2 1 5 . 5 .8 3 2 2 21 6
21 RL-2216. 32 6 8 2 1 21 5 2 1 3 . 6 .4 5
3 216 216
.2 .21 .18
7
.16
6 215 215 215 .79 .70
9 5 2 21 215 215 .84 .81
5
16.284 216
.2 .16 .44
5 5 3 .20
2 1 2 21 213 214 .09 .05
6
.05
8 3
.50 .48 9 216 216 216 .14 .09
1 4 215 215 .80 .76
6
.71
8 215 215 4 216 215 .00 .97 .97
4 4 215 .24 .28
7
.63
1 7 215 215 215 .01 .97
1 6
216 216 .44 .42
2
.39
7 2 216 216 .10 .09
2 5 215 215 .67 .56
8
498 .51 .46
5
.51
2
561 216 215 215 .67 .58
7
646 215 215 .34 .40
1
533 215 214 .96
216 216 .36 .36 8 216 216 .07
16.
12 5 215 215 215 15.
69 2 215 215 .61
6
593 215 215 15. 5.9
37 7 215 215 215 15. 96 8 214
216 216 216 1 6 .35 6 .256 .2 2 6 7 6 8 216 2 1 6 .01 5 . 932 . 8 9 9
8 6 5 6 4 2 2 1 5.4 1 5 .42 5 . 4 75
.5 4 1 2 5 9 215 2 15. 21 5 1 5 . 5 .5 77
. 5 6 1 0 7 1 2 2 1 1 5 .66 5 . 409 . 3 3 7
3 7 1 0 5 2 2 1 5.0 1 3 .81 2 . 6 65
. 4 3 7 8 2 7
2 21 .1 4 43 2 21 15 5. .8 85 2 21 5 . 5 92 42 2 1 5 .0 0 2 2 21 15 5. .3 BM - 2 2 1 2 .1 92 72
216 6
6 . 1 1 3 1 2 2 1 5 .
ROAD .8 3 2 1 1 5 5 . . 3 4 6 1 2 1 6 . 0 8 7 6 8 5 2 1 5 1 4 2 2 1 1 3 3 . . 6 8 5 3
NALA (MUNICIPAL DR
2 1 6 . 1 2 5 2 1 21 5 5 7 3 2 1 6 . 3 6 STP PUMP SHED
2 2 1 6 . 3 6 1 2 1 . 2 .0 6 2 1 4 . 7 5 2
21 216 . 2 . .66 9 .0 21 215 . 2 215 .1 1 .7 9
HDPE TANK
.47
5 216 216
.1 .09 .07 2 21 215 .71 .69
2 6 2 21 216 216
PLATFORM
215 215
.0 .94 .95
8
215 215 .26 RL-2 2
.6015.751 1 2 21 214 214 .78 .72 .68
8
.48
8
.44
8 3 216 216 .98 .95
1 9 215 215 215 .66 .66
3 1 .50
7
.43
4 7 215 215 3 215 215 .18 .25
2 2 214 214 .60
2
.62
5 4 4
216 216 216 .39 .37
4 8 215 215 .98 .03
7
.99
3
977 215 215 .65 .63
6 2 215 215 .49 .58
7 2 CISF .35 .89
6
.17
2
026 215 215 .45 .47
7 6 214 214 214 .62 .16
.26 1 215 81 215 .62 576 .60 582 215 215 .38 605 213
MBBR TANK
216 216 .26 9 216 215 6 215 56
EQILIZATION
215 215 6 215 216 96 4 215 E 56 214
15. 16.
AIN)
.19 6 5.8 215 15. 9 .56 529 5.3 215 14. 6
216 .78 768 215 15. .30 319
PLATFORM
.17 281 65 5.5 .55 14 19 3.9 .33 71
TANK
216 216 8 2 1 5 5 5 5 . 8 POS 2 2 8 2 GAT 5
30 KLD STP
1 6 6 . . 5 7 0 3 9 2 2 1 5 5 . . 7 7 9 0 4 1 2 2 1 1 5 5 . . 0 1
.8 3 6 2 2 2 1 1 5 5 . 5 . 5 5 1 3 T 2 1 1 5 5 . . 3 2 9 5 9 9 2 2 1 1 4 4 . 2 . 2 0 5 2 6
2 21 2 16 1 6 .6 6 . 0 2
. 0 1 2
9 8 7 21 2 15 2 1 5. 1 5 .8 5 . 6 9
.6 2 4 6 7
2 21 2 1 6 1 6 6 . 48 .0 08 1
2 2 1 2 1 5 1 5 .5 1 5 .7 . 8 2 5 8 4 8
2 21 2 15 2 1 5. 1 5 .1 4 . 9 8
. 0 2 7 7 8 4
2 21 2 1 4
2 1 4. 4 . 47 4 .4 5
4 7 9 5 6 1
2 . 1 5 6 .65 2 1 6 2 8 3 .0 1 . 6
.48
1
.51
6 21 216 215 216
.0 .02 .89
9 6 2 21 215 215
.
.65
3
.64
8 1 2 21 30 KLD STP215.60 215.509 15.425 5.471 .613 598 2 215 215
.
15.
9 .09 .71
5 5 2 21 215 215 .99 .97
3
.01
1 8 2 21 214 214
.4 .40 .36
3 9 .74 .14 4
216 .53
1
.53
1 216 215 .05 .10
1
.86
3 215 215 215 .61 .59
9 4 IAF WATCH
TYRE KILLER 2 216 215 .85 .21
1 2 214 214 215 .16 .35
3 3 214 214 .28 .25
3
.27
8 3 212 213 .46
216 216 216 .33 .20
2 4 216 216 .85 .88
7
778 215 215 .62 .67
2 3 2 21 215 . .59
5 6 215 216 .19 .78 .34 322 215 215 .19 .98
7 1 214 214 214 .28 .22
6 213
216 216 .13 .11
7
.10
9 215 215 215 15.
28 2 215 215 .59 553 25 9
POST
215 215 .59 5.5
74 4 216 215 215 15.
48 1 215 214 .81
14.
61 22 214 214
216 216 .03
4
002 5.7 .80 8 02 9 215 15. 5.5 .16 82 215 1 .57 573 05 7 5.3 .35 3 27 6 214 4.5 .49 49 3
216 1 6 6 . . 1 3 6 6 3 2 2 1 2 1 5
21 5 . . 7 9 7 9 6 8 3 8 2 2 1 1 6 5 . 5 . 3 4
.5 0 5
.53
6 2 2 1 5 1 5 . 5 . 5 . 6 5 7 3 4 2 2 1 2 1 5
21 5 . . 8 4 9 2 6 8 2 3 2 2 1 2 1 4 4 .4 . 3 4
.3 5 5 1 6 2 2 3 2 6
5 2 21 216 215
.9 .92 .95
5
.08
2 215 215
.
215
.7 .76 .58
8 9 2 21 215 215 .53
3
.45
1 6 2 21 215 215
.8 .90 .97
2 23 214 214
.
214
.9 .08 .91
3 1 21 214 214 .39 .39
2
.37
2 9 214
.0 .06 .13
4 8 210
.9 .25 .72
1 1
.46 .56 6 215 215 .29
3
.97
1 2 215 215 .55 .79
2 7 215 215 215 .40 .39
5 1 215 M BAR 215RIER 216.1 .19 .24
2 1 215 214 .91 .00
8 2 214 214 214 .33 .31
4 2 214 214 .21 .25 .23
5 2 211 211 .20 .68
1
.16
2
216 216 .65 .61
3
.26
5 216 216 215 .97 .76
7 6 215 215 .80 .03
6
.98
4
883 215 215 .53 .68
1 9 BOO 216 216 .21 .14
3 3 214 215 .10 .21
9
.03
7
854 214 214 .19 .29
2 1 214 214 214 .21 .17
5 5 212 212 213
216 216 .16
5
.09
1 1 215 215 .65 886 53 215 216 215 15.
32 5 215 215 .73
15.
75 11 6 216 216 .87 557 58 215 215 215 14. 75 5 214 214 .31 257 2 8 214 214 .18 108 96
216 216 216 6 .02 .028 3 5 5 215 15. 5.8 .79
5
0 08 4 1 8 2 1 5.8 5 .65 .754 74 4 215 2 1 5.7 5 .66 .6 54 4 3 1 215 15. 5.3 .38
5
3 81 6 4 7 2 14. 4 .56 . 596 51 1 214 2 14. 2 14. 4 .27 . 2 36 8 5 7 214 14. 3.9 3 .96 9 77 6 2 4 0 9 9
26° 15' 52" N
1 6 . 0 0 2 3 5 2 2 1 1 5 6 . . 3 9 7 2 2 1 1 6 . 8 4 5 8 3 2 2 1 5 . 6 6 1 1 2 2 1 1 5 5 . . 3 8 4 2 2 1 1 4 . 6 8 6 3 6 2 1 4 . 1 3 0 8 2 2 1 1 3 . . 9 5 5 . 2 .1 9 0 4
2 21 216 2 16. 1 6 .00 5 .94 .8 94 3 8 2 2 1 2 1 6
2 1 6 .2 6 . 0 8
6 .0 6
9 5 1 2 1 8
2 2 16 2 1 6. 1 5 .5 5 .4 3
. 3 8 8 4 4 8
2 21 2 1 5
2 1 5 .
1 5 . 76
5 . 9 43
. 8 9 2 5 2 7
2 2 1 2 1 5 1 5 .1 4 . 86 . 9 4 5
0 4 7 5 3
2 2 14 2 1 4. 1 5 .1 5 .1 3
. 7 5 7 7 6 9
2 2 1 2 1 4
2 1 4 .
1 4 .2
4 . 2 39
. 1 9 8 3 1 2 2 1 2 1 3 1 3 .8 3 . 78 . 7 0 7
6 2 6 4 5 8 2 1 1
2 1 1 1 1 . 2 1 .2 3
. 7 0 8 8 8 8
2 21 215 .9 .09 9 21 21 . .7 .05 1 2 21 215 .3 .40 2 2 21 215 .9 .11 .32
2 21 214 . .9 .95 4 2 21 214 .3 .40 4 2 21 214 .2 .43 5 2 21 213 . .5 .52 4 2 21 211 .1 .66 9
455 .55 4 215 216 .92 .84
8
.79
8 215 215 216 .28 .29
4 3 215 215 .53 .65
7
.74 7 215 216 216 .25
9
.22
2 215 214 214 .03 .10
5 7 214 214 .38 .35
9
.35 7 214 214 .36 .30
9
.45 213 213 213 .53 .53
3 3 212 212 .14 .32
1
16. 216 .42 .20
1
.12 215 215 .74
1
.64
6 6 216 216 .20 .97
2
.94 8 215 215 215 .76 .83
5 3 216 .16
2
.91
9 3 215 215 .15 .90
3
.72 3 214 214 214 .36 .38
5 3 214 214 214 .31
9
.17 4 213 213 .53 213 213
IAF BOUNDARY WALL 2 216 216 216 .04
4
.96
9 2 215 215 215 .85 .80
3
001 22 216 215 215 .94 767 23 215 215 .91 .82
7
761 45 216 216 215 .67 .39
3
42 215 214 214 .62 544 55 214 214 .33 .37
1
465 08 214 214 .06 .96
6
974 213 .11
4
085 75
216 215 .04 .04
1
041 1 215 215 16. 6.4 588 2 215 15. 16. .41
9
834 2 215 215 15. 5.7 .71
5 77 BOLLARD 215 215 15. .41
5
392 04 214 14. 4.5 .55
6
558 2 214 214 14. 4.5 .55
1 38 3 214 213 13. 4.0
6
163 58 212 12. 2.0 .10
5 07 4
216 1 6 6 . .0 2 9 4 8 1 2 2 1 1 6 . 6 .0 . 1 9 4 1 9 1 2 2 2 1 6 1 5 . .4 2 3 4 2 6 2 2 2 1 1 5 5 . 6 . 7 3 1 7 7 2 2 1 5 1 5 . 5 . 1 . 1 5 8 4 9 2 2 1 1 4 4 . . 7 8 7 2 5 1 1 8 2 2 1 1 4 4 . 5 . 4 4 4 9 4 2 2 1 1 4 . 4 . 0 . 9 7 6 8 7 6 2 2 1 1 2 2 . 1 . 0 9 0 2 5
2 21 216 215
. .91 .92
5
.86
9 1 2 21 216 216
.0 .05 .37
3 2 2 215 215
.
215
.3 .39 .41
7 9 2 21 215 215
.9
215
.8 .97
3
.11
8 7 2 21 215 215
.3 .15 .93
3 6 2 21 214 214
.
214
.4 .38 .4 6 2 21 214 214
.3 .25 .46
2
.61 7 2 21 213 213
.8 .76 .65 9 2 21 212 212
.1 .17 .65
5
.13
6 2
215 .77 4 216 .91 1 215 .40 3 .33 9 215 .93 1
214 214 .37 7 214 .64 4 213 .57 4 212 .31 4
216
.44
4
216
.24
5
216
.16
216
.06
2
.98
1
.99
1
.07
2 86
215 215 215 216
.19
215
.74
8
215
.65
5
215
.69
8
215
.82
4
5.7
72
.77
2
473
216 215 216
.20
216
.24
7
216
.14
7
215
.98
6
215
.98
3
15.
998
5.9
35
.57
2 35
215 215 215
.73
215
.80
4
215
.81
215
.86
6
215
.79
1
5.9
39
.84
2
798 59
215 216 216 216
.27
216
.24
7
216
.20
2
215
.98
8
15.
806
5.4
28
.45
5 54
214 214 215
.03
215
.12
6
215
.09
1
214
.84
2
214
.59
4
14.
546
4.4
66
.39
8 96
214 214
.34
ROAD 214
.35
6
214
.44
2
214
.45
9
214
.40
9
4.5
02
.39
5
439
214 214 214 214
.68
214
.56
7
214
.39
4
214
.22
3
14.
175
4.1
27
.09
8 48
213 213 213
.55
213
.54
9
213
.57
4
213
.55
3
213
.55
7
13.
509
3.4
43
.47
1 61 213
.01
9
212
.99
212
.96
2.9
47
2.9
8
011 11
212 213 213 213
.43
215 215 1 6 6 .1 . 0 96 5 7 1 2 1 2 1 5 6 . . 2 6 6
2 2 3 1 6 1 2 2 1 1 5 5 . 6 . 6 1 1
. 6 2 21 2 1 5 1 5 . 5 .7 . 7 1 2 4 1 3 P 2 2 1 2 1 5 5 . 4 . 4 3 7
3 7 1 8 3 9 2 2 1 1 4 4 . 3 . 3 9 7 9 1 1 2 1 2 1 4 1 4 . 4 . 5 . 5 4 7 5 2 8 2 2 1 2 1 4 4 . 2 . 3 7 9
2 0 3 1 3 1 2 2 1 1 3 3 . 4 . 4 3 5 2 1 2 2 1 2 1 1 3 . 3 . 0 . 9 9 7 8 4 6
2 21 216 .0 .08 .92
8 3 21 216 216
. .0 .48 1 2 21 215 215 .46 .41
8 8 2 21 215 .8 .94 6 H 21 215 215
. .4 .38 3 2 21 214 .3 .43 .40
8 4 2 21 214 .4 .35 4 21 214 214
. .0 .96 2 2 21 213 .4 .40 .38
2 6 2 21 212 .9 .98 5
216 216 .96 .95
3 4 216 216 .93 .91
9
.71 215 215 .47 .50
4 5 215 215 .84 836 .99
1 6 ED 86 215 215 .16 .00
7 5 214 214 214 .38 .38
9 9 214 214 .44 .59 .58
4 9 214 213 .90 .75
2 7 213 213 213 .35 .37 .38 212 212 .02 .12
3
.33
2 5
5 215 215 215 .90 .96
8 5 215 215 215 .06
6
.15
7 8 215 215 .49 .46
2
.61 215 15. 215 .3P1 S2 6 215 215 .10 .17
7
.12
3 6 214 214 .34 .32 1 214 214 214 .58 .60
7 4 213 213 .67 .65
6
.62
9 6 213 213 .37
3 9 213 213 213 .39 .54
8
.29 .20
6
.12 5 215 215 .97 .73
2
843 216 216 .04 889 83 215 215 215 .83
5
697 15 BOLLARD 2 216 HED216. UPP 216.26 .25
7 13 215 215 215 .98 794 02 214 214 .29 .43
6
533 39 214 214 .64 483 54 213 213 213 .61 595 73 213 213 .39 .30
7
301 74 213 213
26° 15' 52" N

216 216 .03 6 215 06 816 216 15. 5.5 .89
5
215 15. 8 6.1 .92
8
214 14. 4.6 .48
8 214 214 14. 9 214 14. 4.3 .30
8
238 213 13. 3.5 4 213 213 13.
216 216 1 5 .99 6 .0 18
. 05 4 6 1 3 215 2 15. 2 15.8 1 5 . 5 . 8 53
.8 1 5 4 1 5 2 2 1 1 5 5 .7 43
. 5 4 7
. 6 6 0 8 3 2 2 1 5.5 1 5 .66 5 . 8 97
. 7 8 6 0 1 1 S U L Y 216 2 1 2 1 5 1 5 .65
5 . 5 51 . 5 9 9 2 2 1 1 4 4 . 4 11
. 3 5 2
2 8 7 0 7 2 2 2 1 4.5 1 4 .41 1 4 . 3 . 3 2 3 5 6 2 2 1 2 1 4 1 4 . 4 . 1 72 . 3 1 2 9 5 2 2 1 1 3 .53 3 .539 . 5 2 3
5 0 6 9 9 8 2 2 1 3.2 2 1 3 .3
3 . 2 79
. 2 5 9 4 6 9
2 21 216 .2 .94 93 4 2 1 5 .8 7 6 7 5 6 2 21 15 5 .7 8 1 2 2 1 1 5 .8 .8 21 1 PP G 2 1 15 5 .4 4 1 1 2 4 2 21 14 4. .2 0 1 2 2 14 4 .4 55 61 7 2 1 1 4 .3 2 2 8 6 2 21 13 3. .4 8 6 2 1 1 3 .2 23 32 2
216 1 5
216
.0 .2 6 5 4 1 2 2 1 2 1 5
21 5 . . 6 7 4 6 4 9 2 2 1 1 5 5 .7 . 6 3
.4 5 4 5 2 2 1 5 1 5
215
. 7 . 7 9 0 2 1 L I PIP 2 2 2 1 5 . . 4 3 7 3 1 3 2 2 1 1 4 4 . 2 . 2 5 2 8 4 2 2 1 1 4 .
214
. 4 . 4 2 7 1 5 2 2 2 1 4 4 . . 0 .9 8 8 1 1 2 2 1 1 3 3 . 4 . 4 8 4 8 6 2 2 1 3
21 3 .
213
. 2 . 2 3 0 3 3
2 216 216
.0 .91 .89
6
.95
7 215 215
.
215
.7 .82 .69
4 6 2 21 215 215 .52 .48
4
.40
6 5 2
215 215
.7 .79 .04
2
.12
8 5Y 21 215 215
.
215
.2 .22 .21
3 9 2 21 214 214
.3
214
.3 .36
2
.35
2 214 214
.5 .58 .57 4 21 214 213 213
.8 .78 .74
4 6 2 21 213 213
.
213
.4 .45
6
.5 9 213 213
.3 .50 .43
3 8 1 BM - 1
3 215 215 .93
3
.87
2 7 215 215 .69 .68
9
.65
1 8 215 215 215 .63 .6 8 215 216 .17 GI 6P.376 E LI .473 215 215 .15 .10
5
.96 214 214 214
.3 .26
7 214 214 .56 .57
2
.58 2 213 213 .70 .67
1 2 213 213 .51 .58
2 213 213 .48 .66
.22 .13
3
.06
1 215 215 215 .85 .83
5 6 215 215 .60 .55
9
759 215 215 .35 .14
6
.18
8 216 216 21 IPE 216NE .44
3 2 215 215 214 .78
7
.61
4
562 214 214
.3 .45
2 4 214 214 214 .57 .48
5 2 213 213 .65 .63
4
.61
5
614 213 213 .48 .39
2 1 213 213
216 216 .03
8
.06
2 6 215 215 .84 77
.92
2 215 215 215 15. 69 2 215 215 649 81 6 2" 216 .39 57
.50
8 214 214 14. 98 2 214 .45 336 17 1 214 214 .43 43 5 213 213 213 13.
11 8 213 213 .36 326 05 4 RL-213.760
216 216 216 1 6 .08 6 .1 95
.9 57 9 5 3 215 2 1 5.8 1 5 5 . 804 . 7 86 7 5 2 7 1 6 2 2 1 5.6 1 5 .54 5 . 6 84 . 6 5 0 9 1 215 2 15. 2 1 5.6 1 5 .71 5 . 7 35
.7 5 8 3 4 6 TYRE KILLER L I N 216 2 1 5.4 1 5 5 . 536 . 5 33 3 2 8 8 2 7 2 2 1 4.4 1 4 .45 4 . 4 12
. 3 5 6 8 3 3 214 2 14. 2 1 4.2 1 4 .22 4 . 37 . 5 2 7 2 214 2 1 4.3 1 4 .25 4 . 305 . 2 78 1 9 2 6 7 5 2 2 1 3.6 1 3 .58 3 . 5 65
. 5 4 2 3 2 7 213 2 13. 2 1 3.3 1 3 .28 3 . 2 69
. 2 5 8 5 1 5
.1 .42 4 2 1 5 . 2 21 5 7 0 5 .7 .69 2 1 5 . 2 21 2 4 21 4 .55 2 1 4 . 2 21 5 2 3 .2
2 21 215 216 .32 058 5 2 21 215 215
.6 .60 57
.54
8 21 215
.
215
.5
15.
41 99 1 2 21 215 215 753 79 1 E4 2 21 215 215
.1 .14 28 7 214 214
.
214
.2 .28 26 3 2 214 214
. 566 75 6 2 21 214 214
.0
13.
96
3.8
62 6 213 213
.
213
.5
13.
52 25 1 2 21 213 213 .24 306 16
216 216 2 16. 1 5 .94 6 . 29 . 1 8 3 7 2 6 215 2 15.5 1 5 1 5 .59 .6 37 7 5 3 7 5 1 2 2 1 5.3 1 5 .39 5 . 3 42 .3 2 7 7 8 215 2 15. 2 1 5.7 1 5 .74 5 . 8 83
. 9 2 6 3 9 " 2 215 2 1 5.1 1 5 .10 5 . 067 . 0 72 0 7 8 4 4 9 214 2 1 4.3 1 4 .33 4 . 35 . 3 1 2 5 7 4 214 2 14. 2 1 4.5 1 4 .55 4 . 5 39
. 5 4 7 5 5 3 2 2 1 2 1 3.7 3 .677 . 5 95 5 4 4 3 3 8 2 2 1 3.5 1 3 .53 3 . 535 . 5 5 7 6 5 2 213 2 13. 2 1 3.5 1 3 .66 3 . 6 4
. 5 6 4
2 5 5 2 1 5
216
.15
7
216
.08
7
216
.08
3
216
.10
7
216
.13 .15
2
.98
8 6
2 21 216 216
.0
215
.95
215
.90
5
215
.89
5
215
.95
9
216
.02
3
.77
8
.74
8
.75
5
2 21 215
.
215
.7
215
.67
215
.50
1
215
.80
6
216
.12
1
215
.47
6
.71
1
.77
7
2 21
PARKING 21 5
215
. 0
214
.8
215
.01
8
215
.40
3
215
.42
5
215
.47
7
215
.57
6
.56
3
.55
5
639
2 21 215 215
.9
216
.14
216
.26
3
216
.24
6
215
.52
3
215
.54
3
.57
1
.57
8
.45
7
289
2 1 21 5
215
.
214
.9
214
.76
214
.67
2
214
.62
5
214
.56
7
214
.53
5
.49
2
.45 3
2 2 214 214
. 2
214
.2 7
214
.30
9
214
.35
6
214
.43
5
214
.41
9
.23
4
.34
6
.45
8
533
2 21 214 214
.5
214
.56
214
.51
4
214
.44
4
214
.37
6
214
.33
4
.27
4
.22
7
.15
9
055
2 1 21 3
213
.
213
.5
213
.52
213
.52
3
213
.51
8
213
.52
8
213
.52
1
.49
9
.47
7 8
2 21 213 213
.
213
.4 7
213
.39
7
213
.41
3
213
.36
5
213
.33
1
213
.31 .29
3
.28
1
2 21 213
216 215 .22 .88
1
63 215 215 215 712 43 3 215 215 215
.7
15.
27 65 215 215 15.
63 8 215 215 42 6 214 214 .42 393 6 4 214 214 214 14.
47 1 214 214 63 9 213 213 .47 49 9 213 213
.27 63 4
216 215 2 15. 5 .74
8
. 0 02 3 7 8 2 15. 2 1 5.6 15 .57 5 .52 . 5 6 7 1 9 7 2 2 1 5.2 1 5 .33 . 3 97 3 9 5 STORM 3 5
WATER DRAIN
3 2 2 1 5.5 1 5 .65 5 . 683 . 6 4 2 1 3 4 215 2 15. 2 1 5.2 1 5 .23 5 . 22 . 4 1 1 0 8 2 214 2 14. 2 1 4.3 4 .33 . 3 51 3 6 1 4 1 9 2 2 1 4.5 1 4 .56 4 . 561 . 5 4 2 2 3 2 214 2 14. 2 1 3.9 1 3 .87 3 . 7 94
. 7 0 4 1 8 3 213 2 13. 2 1 3.4 3 . 486 . 4 89 4 9 7 9 5 7 213 2 1 3.2 1 3 .28 3 . 352 . 3 9 5 4 3 1
1 216 5 1 1 6 .77 5 . 2 1 . 7 6 3 1 5 .11 7 1 4 . 2 1 5 2 6 .54 3 1 3 . 2 1 4 .49
.19
8 6 2 216
.
216
.3 .07 .14
4 8 2 2 215 215
. .9 .73
4 4 2 21 215 215
.3 .32 .29
4
.34
7 2 2 215 215 215
.7 .73 .72
2 8 2 2 215 215
. .92 .78
4 2 21 214 214
.3 .25 .27
3
.30
3 4 2 214 214
.
214
.5 .53 .53
8 2 21 213 213
. .52 .50
4 4 2 21 213 213
.4 .49 .44
9
.37
6 4 2 213 213
.
213
216 .13 .06
2 3 216 216 .05 .03
4
073 24 215 215 215 .56 .27
7
145 215 215 .34 389 91 215 215 .73 .63
8
576 79 215 214 214
.72 .65
2
575 214 214 .36 465 26 214 214 214
.5 .43
1
414 213 213 213 .48 .48
1
438 213 213 .36 388 69
216 216 .08 .10
6
132 67 216 216 16. 6.1 .95
5 52 215 216 16. 5.5
13 626 69 215 215 15. 5.3 .51
8
515 06 215 215 15. 5.5 .59
7 11 214 214 14. .54
1
525 9 214 214 14. 4.5 .43
2
469 27 214 14. 4.3
97
.36
1 77 213 213 13. 3.4
2 419 99 213 213 13. 3.3 .33
6
316 5
216 216 6 . . 9 9 1 8 2 3 6 2 2 1 1 5 5 . 7 .7 7 8 9 6 8 2 2 1 1 5 . 5 . 7 . 7 1 4 5 7 9 2 2 1 2 1 5 5 . . 4 4 5 4 8 2 9 2 2 1 1 5 5 . 6 . 0 6 4
.5 0 9 9 1.5 LAKH 2 2 1 4 1 4 . 4 . 4 .4 6 6 4 6 6 2 2 1 1 4 4 . . 5 5 3 2 4 2 6 2 2 1 1 4 4 . 2 . 1 8 2
.0 8 7 2 2 2 1 1 3 . 3 . 3 . 4 0 8 2 2 2 1 1 3 3 . . 3 0 2 9 4 8 3
21 215 215
.
215
.8 .81 .85
2
.93
2 21 215 215
.6 .64 .59
8
.54
3 4 2 21 215 215
.5 .42 .42 .44
1 21 215 215
.
215
.4 .57 .58
1 6 2 21 216 215 .50 .50
9
.50
8 2 21 214 214
.4 .42 .38
5 5 2
2 21 214 214
.
214
.5 .55 .54
8 9 2 21 214 214 .00 .91
7
.83
2 3 2 21 213 213
.4 .46 .47
5 2 2 21 213 213
.
213
.2 .29 .29
1 9
215 215 .37
4
.16
5 215 215 215 .54 .64
2 9 215 215 .41
5
.32
3 6 215 215 .55 .59
7
.67
9 215 215 215 OH TANK 3 214 214 .33 .38 .34 2 214 214 .52 .50
9 8 214 213 213 .74 .65
4 2 213 213 .45 .44
3
.44 8 213 213 .33 .38
7 6
215 216 .84
9
.01
3 6 215 215 .79 .84
3 8 215 215 215 .49 .41
9 2 215 215 .75
2
.76
3
695 .22 .91
9 6 214 214 214 .28 .24
5 1 214 214 .49 .50
6
.51
3 213 213 .58 .59
1 1 213 213 213 .43 .42
6 5 213 213 .43
8 216 .08 101 215 .71 544 215 .39 215 19 215 .81 739 .28 408 214 .51 93 213 .60 582 213 .37 326 213
216
.18
216
.09
7
2 1 6 .06
1
21 6 .087
216
.1 1 2
6 .0 4 3
9 9 3 2 8 5
215 216 216 2 16. 2 1 6 .07
9
2 1 6 .058
1 5 .8 69
5. 8 2 2
.7 6 3
6 6 8 2
215 215 2 15. 2 1 6.0
17
2 1 6 .45
7
2 1 5 . 57
1 5 . 6 7 5
5 .8 1 3
.72 7 0 6 3
215 215
2 1 5 .41
1
2 1 5 . 4 44
1 5 . 4 9 6
.4 3 1
4 4 9 4 5 1
215 215 2 15. 2 1 5.7
2 1 5 .65
8
2 1 5 . VIP
596
15 . 6 05
5. 6 1 6
.0 6 3
214 214 2 14. 2 1 4.6
62
2 1 4 .58
5
21 4 . 5 31
1 4 . 5 1 6
4 . 5 0 2
. 49 2 84 5
214 214 214 2 14. 2 1 4.4
95
2 1 4 .55
4
2 1 4 . 5 36
1 4 . 5 2 6
.5 3 1
53 6 4 1 1
214 214 214 2 1 4.4
2 1 4 .47
7
2 1 4 . 461
14 . 4 45
4. 3 6 1
.2 5 8
1 5 4 1
213 213 2 13. 2 1 3.5
38
2 1 3 .49
5
2 1 3 . 4 53
1 3 . 4 1 1
3 . 4 1 5
. 48 3
5 5 7
213 213 2 13. 2 1 3.3
18
2 1 3 .35
6
2 1 3 . 3 73
3 . 3 4 1
.3 2 9
31 8 9 5 2
2 1 21 5 .
215
. 9
215
.8 9
215
.8 8
215
.86
1
215
.98
5
215
.89
4
.81
5
.85
1 9
2 2 1 2 1 5
21 5 .
215
. 6
215
.6 5 1
215
.68
3
215
.56
215
.66
2
.75
6
.73
8
.64
2 5
2 2 1 2 1 5
21 5 .6
215
. 5 0
215
.4 3 7
215
.42
9
215
.42
9
215
.35 .29
9
.38
3 8
2 2 1 5
21 5 .
215
. 4
215
. 4 9
215
.4 8 3
215
.47
7
215
.50
9
215
.52 .57
1
.71 1 PARKING
2 2 1 2 1 6
PARKING SHED 215
.59
8
215
.51
7
215
.18 .88
9
.82
2 1
2 2 1 2 1 4
21 4 . 4
214
. 4 7
214
.4 8 4
214
.45
3
214
.36
7
214
.37
1
.28
1
.22
3 3
2 2 1 4
21 4 .
214
. 5
214
. 5 5
214
.5 3 4
214
.51
5
214
.49
6
214
.47
7
.48
1
.46
6 5
2 2 1 2 1 4
21 4 .
214
. 0 5
213
.9 5 5
213
.87
1
213
.78
1
213
.74
1
.71
6
.72
6
.68
2 8
2 2 1 2 1 3
21 3 .
213
. 6 0
213
.5 6 9
213
.54
213
.52
4
213
.51
7
.52
2
.52
1
.38
3
2 1 2 1 3
21 3 .
213
. 2
213
. 2 7
213
.2 5 7
213
.28
4
213
.33
2
213
.38
.13
9 7 215 215 .88 .92
8
121 45 215 215 215 .71 .17
6
162 215 215 .42 .61
4 215 215 .70 .79
8
737 214 214 .71 .63
6
561 214 214 .32 .45
4
.57
4
594 214 214 .44 .49
1
488 213 213 213 .63 .59
4
552 213 213 .32
6
.27
6
271
216 .05 .06
9 2 215 215 16. 6.6 .69
2
.74 215 216 16. 6.0
61
.73
7 96 215 215 15.
37
5.4
81 551 215 215 15. 5.6
21
.61
5
624 214 214 14. 4.5
35
.51
5 99 214 214 214 14. .53
4
525 214 214 14. 4.4
85
.48
3
433 213 213 13. 3.5
1
3.5 73 213 213 213 13. .30
9
347
216 216 1 6 .07 6 . 026 .9 6 9 1 2 1 2 2 1 2 1 6 1 6 . 3 98 . 6 4 5 9 7 2 2 1 1 5 5 . 7 . 7 0 6
5 4 5 9 8 2 2 1 1 5 . 5 . 4 57
. 4 4 4
4 2 8 2 2 1 2 1 5 1 5 . . 6 3 3 2 2 1 1 4 4 . 4 . 4 8 8
4 9 9 7 2 2 1 4 1 4 . 4 . 5 3
. 5 3 6 4 2 7 2 2 1 2 1 4 1 4 . 4 . 3 3
2 2 7 2 4 2 2 1 2 1 3 . 5 . 6 4 1
7 0 9 5 2 2 1 3 1 3 . 3 . 3 39
. 3 1 1 8 2 5
2 21 215 215
.9 .89 .87
6
.86
2 216 215 215
.7 .96 .92
1 3 2 21 215 215
. .4 .44 .43
3 8 2 21 215 215
. .42 .44 1 2 215 2 21 214 214
. .57 .64 .60
5 3 2 21 214 214
.5 .54 .42
1 6 2 21 214
.
214
.1 .02 .92
1 2 21 213 213
. .70 .66
7
.62
9 8 2 21 213 213
.2 .25 .24 9
215 215 215 .85
9
.86
8 7 215 215 .76 .66
5
.65
5 4 215 215 215 .46 .38 4 215 215 .45 .48
8
.53
1 5 6 9 214 214 214 .49 .43
1 9 214 214 .41 .41
1
.40
6 4 214 213 .89 .86
3 6 213 213 213 .61 .63
8 9 213 213 .22 .27
7
.32
8
215 215 .86 .97
2 2 215 215 .63 .55
5 3 215 215 .37 .44
5
.44
2
363 215 215 215 .62 .69
1 1 .13 .85 .83
5 4 214 214 .29 .28
6
.31
9 214 214 214 .42 .4 5 213 213 .81 .78
3
.73
9 5 213 213 .65 .63
5
.48
1 213 213 213
.18
1 1 215 215 .13 292 22 5 215 215 215 .75 019 6 215 215 73 8 215 215 .70 743 67 215 214 214 .68 14.
6 7 214 214 394 43 214 214 .37 407 67 213 213 213 .69 51 8 213 213 345 84 7
216 1 6 .10 6 . 083 . 0 2 8 6 2 4 216 2 16. 1 6.7 6 .47 . 4 06 3 7 5 4 4 215 2 16. 1 5 .98 5 . 945 . 7 36 7 1 6 HM 215 2 15. 2 1 5.3 1 5 .44 5 . 485 . 4 7 8 4 6 7 215 2 15. 1 5.6 5 .63
3
5 . 6 3 6 3 4 3 5 214 2 1 4 .56 4 . 547 . 5 27 1 2 4 214 2 14. 2 1 4.5 1 4.5
5
4 . 5 38
. 5 25 2 8 4 214 2 14. 1 4.4 4 .46
3
. 4 38 4 4 4 9 5 2 213 2 1 3.6 1 3 .60 3 . 586 . 6 58 7 3 213 2 13. 2 1 3.2 1 3 .22 3 . 2 25
. 3 3 1 2 6 8
Purpose Drain-1
2 21 9 3 6 2 1 6 . .4 9 2 1 5 . 8 3 2 21 4 4 5 2 1 21 . 6 2 1 4 . 5 1 9 2 5 3 9 2 1 4 . 2 1 3 . 8 2 3 9
216 215
.
215
.9
215
.90
215
.88
4
.86
7
.84
9
.84
2 21 216 216 215
.6
216
.07
5
.28
2
.12
5
.77
1
2 21 215 215
.6
215
.57
215
.53
2
.50
9
.44 .48
HM 215 215
.
215
.4
215
.44
215
.45
4
.46
1
.45
9 6
2 215 215
.
215
.58 BOR 215
.59
4
.60
3
.53
4 2 21 214 214
.5
214
.56
214
.66
7
.78
6
.71
6 9
21 214 214
.
214
.5
214
.53
214
.54
4
.33
7
.19
9 3
2 21 214 214
.3
214
.29
214
.18
9
.08
6
.00
4
.97
6
2 21 213 213
.
213
.84
213
.80
2
.76
4
.77
1 6
21 213 213
.
213
.2
213
.27
213
.24
2
.22
3
.20
5 1
215 215 215 215
.89
5
.99
8
285 31 1
216 216 215 215
.66
215
.55
4
.52
9
526 66
215 215 215 215
.41
7
.41
4
.48
8 57 6 215 215 215
.46
215
.50
4
.57
8
631 01 6 EWE 215 215
215
.02
4
.86
2
849 96
214 214 214
.46
214
.44 .34
2
.40
6 57 3 214 214 214
.23
214
.29
3
.32
3
329 09 6
214 214 213 213
.88
213
.79
6
.79
2
787 51
213 213 213
.76
213
.77
5
.79
5
749 57 213 213 213
.22
213
.29
7
. 134 35 215 2 16. 1 6.6 6 .70 . 106 3 3 9 6 4 2 215 2 15. 1 5.5 5 .64
8
. 6 91 0 7 9 215 215 2 1 5.4 1 5 .31 5 .401 . 5 04 3 7 4 215 2 15. 1 5.7 5 .78 .6 74 HM 6 4 4 2 7 7 LL 214 2 14. 1 4.6 4 .60
6
. 5 89 6 3 2 214 214 2 1 4.4 1 4 .44 4 . 574 . 5 57 4 1 9 214 2 14. 1 4.3 4 .30 . 3 75 4 1 7 9 9 6 213 2 13. 1 3.7 3 .70
7
. 6 71 4 3 6 213 2 13. 2 1 3.6 2 1 3.4 3 . 307 . 2 47 9 4 9
6 . 0 . 4 5 2 2 1 21 6 16 . 5. 9 5 9 2 2 1 5 . 7 .7 2 70 6 81 2 1 5 . 4 7 9 2 2 1 21 5 15 . 5. 6 3 2 2 2 1 4 .5 .5 6 5 38 2 1 4 . 5 2 6 2 2 1 21 4 14 . 4. 3 0 3 2 1 3 . 7 .8 1 88 8 59 1 3 . 1 3 2
21 216 216 6 .00 .9 2 4
9 0 1 7 9 2 2 2 1 1 6 .0 6 . 1 3
. 0 8 8 1 5 7 21 2 15 2 1 5 1 5 . 5 . 6 . 6 1 2 4 3 1
2 2 1 2 1 5 1 5 .4 5 . 42 . 4 3 9
4 5 3 3 7 7 2 2 1 1 5 .6 5 . 6 1
. 5 6 6 4 9 1.5 LAKH 21 2 14 2 1 4 1 4 .5
4 . 5 . 6 1 9 3 6
2 2 1 2 1 4 1 4 .5 4 . 5 2
. 5 3 2
5 3 6 4 1 3 2 2 1 1 4 .4 4 . 4 1
.3 5 7 5 4 6
2 2 1 2 1 3
2 1 3 1 3 . 3 . 9 . 9 3 8 3 6 9
2 2 1 2 1 3 1 3 .3 3 . 3 1
. 2 8 4
2 5 6 2 9 6
21 215 . .8 .86 4 2 21 216 .9 .74 5 2 21 215 .5 .47 1 2 21 215 . .6 .61 6 2 21 215 .5 2 21 214 .6 .58 3 2 21 214 . .5 .36 2 2 21 214 .2 .16 8 2 21 213 .9 .93 6 2 21 213 . .2 .20 8
215 215 215 .84 .84
8 6 215 215 .92 .79
1
.66
5 1 215 215 .47 .50
3
.47
2 215 215 215 .59 .47 215 .39
6
.31
7 2 214 214 .54 .43
9
.42
5 214 214 214 .20 .17
6 1 214 214 .07 .97
4
.87
1 213 213 .95 .95
5 2 213 213 213 .18 .17 6
215 .97 2 215 215 .63 215 .45
1 9 215 .48 9

Corrigendum 1 Compressed

Uploaded by

Copyright:

Available Formats

Corrigendum 1 Compressed

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Corrigendum 1 Compressed

Uploaded by

Copyright:

Available Formats

CORRIGENDUM-I

[Tender ID No.: 2022_AAI_136560_1]

Sub: Construction of New Passenger Terminal Building for domestic operations at

Other terms & conditions remain unchanged.

Manager (Engg-C) Manager (Engg-E)

AGM (Engg-C) AGM (Engg-E)

Jt. GM (Engg-C) Jt. GM (Engg-E)

Contract Price Weightages

SCHEDULE OF MAJOR COST CENTRE: For Item no 01 of SOQ

(iii) Slabs, Stairs etc.

d IPPBX/ EPBAX System 0.45

3.18 AICMC of AS Packages 0.26

3.19 AICMC of IT Packages 0.34

The preferred makes is listed below:

LIST OF PREFERRED MAKES

DIGIDRIVES/ AMBIT/ ELINS/ JAKSON/ ZENIYA/ EVA &

L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/ HAVELLS/

L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/ ANDREW YULE/

MEGAWIN/ SELEC/ NEWTEK ELECTRICALS/ AE* /

CG POWER (CGPSL) / L&T/ C&S/ SIEMENS/

L&T/ LEGRAND/ ABB/ TDK(EPCOS) / C&S/ SIEMENS/

CHINT & ALL MAKES IN CAT-A

FINDER/ L&T/ LEGRAND/ ABB/ C&S/ SIEMENS/

HAGER & ALL MAKES IN CAT-A

L & T/ GE POWER / SIEMENS / ABB / C&S/ INDO

HAGER & ALL MAKES IN CAT-A

B. SUBSTATION RELATED ITEMS.

ABB/ DEHN/ TERCEL/ERICO*/ PHEONIX*/ INDELEC*/

ABB/ SIEMENS/ SCHNEIDER /ALLEN BRADELY*/ GE

CONSUL NEOWATT/ ANDREW YULE

35 COMPACT SUB STATION L&T/ ABB/ C&S/ SCHNEIDER CATEGORY - 1

EATON / ALL MAKES IN CAT-A

MICROTEK/ POWER-ONE/ SOCOMEC/ GREEN /

DELTA / EATON & ALL MAKES IN CAT-A

D INTERNAL WIRING RELATED TEAMS

HAGER/ ALL MAKES IN CAT-A CATEGORY - 2

RMCON/ BEC/ SUPER

BEC/ AKG/ ANCHOR/ GM/ POLYPACK*/ PRECISION*/

KEI/ PARAMOUNT/ BONTON/ RAJNI GANDHA/ CMI/

GALAXY CONCAB & ALL MAKES IN CAT-A

BENLO/ INDO ASIAN/ C&S/ SIMON/ ANCHOR/ L&T/

HAGER & ALL MAKES IN CAT-A

E FIRE ALARM EQUIPMENTS.

KIDDE (UTC)/ GST (UTC) & ALL MAKES IN CAT-A

APOLLO/ AUTRONICA (UTC)/ EDWARDS (UTC)/

KIDDE (UTC)/ GST (UTC) & ALL MAKES IN CAT-A

APOLLO/ EDWARDS (UTC)/ SIEMENS/ BOSCH/

GST (UTC) & ALL MAKES IN CAT-A

APOLLO/ SIEMENS/ BOSCH/ TYCO SIMPLEX/ G + M

60 FIRE ESCAPE / EXIT SIGNAGES LIFE-GUARD/ PROLITE/ DELITE CATEGORY -3

VENUS & ALL MAKES IN CAT-A

68 SUCTION / POT / Y- STRAINER VTM/ ANERGY/ EMERALD / SANT / LEADER* CATEGORY - 2

KANEX/ FIRESHIELD/ LIFE-GUARD/ SUPREMEX/

MAHINDRA/ CATERPILLAR/ ASHOK LEYLAND* /

GRUNDFOS/ ANDRITZ/ XYLEM/ AQUA _ANS/ KSB /

SINGLE PHASING PREVENTOR/ OVER SELEC/ BCH/ L&T* / GE POWER* / SIEMENS* /

81 PRESSURE SWITCH DANFOSS/ EMERALD/ SWIZER* CATEGORY - 2

INSULATION MATERIAL TWIGA / ARMAFLEX / ALP AEROFLEX / K-FLEX /

ROLASTAR/ DUCTOFEB/ ADVANCE/ WAVES/ ZECO

MAPRO/ GREENHECK / RUSKIN / CARYAIRE

ABB/ DEHN/ TERCEL/ERICO/ PHEONIX/ INDELEC*/

BEC/ AKG/ ANCHOR/ GM/ POLYPACK/ PRECISION/