Remove Install Headliner CL203 AR68.30-P-4300PB

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

AR68.

30-P-4300PB Page 1 of 4

AR68.30-P-4300PB Removing and installing headliner 21.11.00

MODEL 203.7

Illustrated on vehicle with code (413)


panorama sliding roof

1 A-pillar paneling
2 Interior rearview mirror
3 Rain sensor cover (with code (345a)
rain sensor)
4 Sun visor
5 Grab handle
6 B-pillar paneling
8 Headliner

A44/3 Rear dome lamp PTS warning


display (with code (220a) Parktronic
system (PTS))
E15/3 Rear dome lamp
N70 Overhead control panel control unit

P68.30-2806-06

© 2006 Mercedes-Benz USA, LLC


AR68.30-P-4300PB Page 2 of 4

P68.30-2807-09

Illustrated on vehicle with code (413) 9 Mounting clip 14 Clip


panorama sliding roof 10 Check strap
11 Front bracket N10/2 SAM control module with rear
8 Headliner 12 Wiring harness fuse and relay module

Modification notes
24.1.01 Entry pattern changed P68.30-2315-09
24.1.01 Special tool, assembly wedge Step 17
(110 589 03 59 00) eliminated
24.1.01 Loosening rear Velcro strips (10) eliminated Step 17
24.1.01 Unhooking catch straps (10) added Step 20

Remove/Install

1 Move left and right front seats toward See Operating Instructions
front
2 Disconnect ground cable of battery AR54.10-P-0003P
3 Unclip left and right door sill molding
and remove
4 Remove edge guard from door cutout
on left and right
5 Remove left and right paneling from AR68.30-P-4050P
A-pillar (1)
6 Remove overhead control panel control AR82.20-P-1000P
module (N70)
7 Remove inside rearview mirror (2). AR68.40-P-0001P
8 Remove inside rearview mirror holder
9.1 Remove rain sensor cover (3) and On vehicles with code (345a) rain
disconnect rain sensor sensor
10 Disconnect light switch-on sensor
11 Remove left and right sun visor (4),

© 2006 Mercedes-Benz USA, LLC


AR68.30-P-4300PB Page 3 of 4

unscrew bolt from left and right pivot


bearing.
12 Remove left and right handle (5) AR68.30-P-4330P
13 Remove left and right paneling from AR68.30-P-4700PB
B-pillar (6)
14.1 Remove interior protection system Only on vehicles with code (882b) AR80.50-P-9820F
transmitter/receiver interior protection system (only with
ATA) when replacing headliner (8).
15.1 Remove rear dome lamp (E15/3) On vehicles without code (220a) AR82.20-P-0113P
Parktronic system (PTS)
15.2 Remove rear dome lamp PTS warning On vehicles with code (220a) Parktronic AR54.65-P-0004P
display (A44/3) system (PTS)
16 Move mounting clips (9) toward front
17 Fold rear seat backrest forward See Operating Instructions
18 Remove left and right paneling from AR68.30-P-4490PB
Remove C-pillar
19 Disconnect electrical connectors for
headliner (8) wiring harness (12) from
rear SAM control module with fuse and
relay module (N10/2)
20.1 Expose headliner wiring harness (8) in On vehicles with code (273) telephone
area of right C-pillar and disconnect preequipped for D-network portable
electrical connectors cellular telephone or code (329)
portable cellular telephone preequipped
for AMPS system or code (494)
California version or code (498)
Japanese version or code (852)
portable cellular telephone preequipped
completely on dome or code (853) MB
standard telephone or code (854) MB
portable cellular telephone or code
(855) TELE AID or code (810) sound
system
21 Remove edge guard from rear door
cutout

© 2006 Mercedes-Benz USA, LLC


AR68.30-P-4300PB Page 4 of 4

22 Unhook catch straps (10) from


headliner (8)
23.1 Unclip headliner (8) in area B (arrows) On vehicles with code (413) Panoramic
sliding roof
Installation: Ensure that clips (14)
arrest audibly
24.1 Unhook headliner (8) on left and right in On vehicles with code (413) Panoramic
area A sliding roof
For this purpose move headliner (8)
slightly on side left and right sides and
remove
25 Remove headliner (8) from front mount Installation: Ensure that headliner
(11) and lay down in passenger (8) is positioned on front mount (11)
compartment
26 Mask in area of rear door cutout with This allows the headliner (8) to slide
adhesive tape through the rear door cutout more
easily
27 Remove headliner (8) through rear door Remove headliner (8) with aid of
helper and lay down on suitable
subbase.
28.1 Prepare headliner (8) for installation. Only when replacing headliner (8). AR68.30-P-4305P
29 Install in the reverse order

© 2006 Mercedes-Benz USA, LLC

You might also like