The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

<https://www.canonical.com>

1. Overview

2. A brief history lesson

3. Opening a terminal

4. Creating folders and files

5. Moving and manipulating files

6. A bit of plumbing

7. The command line and the superuser

8. Hidden files

9. Conclusion

1. Overview
The Linux command line is a text interface to your computer. Often referred to as the shell,
terminal, console, prompt or various other names, it can give the appearance of being complex
and confusing to use. Yet the ability to copy and paste commands from a website, combined with
the power and flexibility the command line offers, means that using it may be essential when trying
to follow instructions online, including many on this very website!

This tutorial will teach you a little of the history of the command line, then walk you through some
practical excercises to become familiar with a few basic commands and concepts. We’ll assume
no prior knowledge, but by the end we hope you’ll feel a bit more comfortable the next time you’re
faced with some instructions that begin “Open a terminal”.

What you’ll learn

A little history of the command line

How to access the command line from your own computer
How to perform some basic file manipulation
A few other useful commands
How to chain commands together to make more powerful tools
The best way to use administrator powers

What you’ll need

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 1 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

A computer running Ubuntu or some other version of Linux

Every Linux system includes a command line of one sort or another. This tutorial includes some
specfic steps for Ubuntu 18.04 but most of the content should work regardless of your Linux
distribution.

2. A brief history lesson

During the formative years of the computer industry, one of the early operating systems was called
Unix. It was designed to run as a multi-user system on mainframe computers, with users
connecting to it remotely via individual terminals. These terminals were pretty basic by modern
standards: just a keyboard and screen, with no power to run programs locally. Instead they would
just send keystrokes to the server and display any data they received on the screen. There was no
mouse, no fancy graphics, not even any choice of colour. Everything was sent as text, and
received as text. Obviously, therefore, any programs that ran on the mainframe had to produce
text as an output and accept text as an input.

Compared with graphics, text is very light on resources. Even on machines from the 1970s,
running hundreds of terminals across glacially slow network connections (by today’s standards),
users were still able to interact with programs quickly and efficiently. The commands were also
kept very terse to reduce the number of keystrokes needed, speeding up people’s use of the
terminal even more. This speed and efficiency is one reason why this text interface is still widely
used today.

When logged into a Unix mainframe via a terminal users still had to manage the sort of file
management tasks that you might now perform with a mouse and a couple of windows. Whether
creating files, renaming them, putting them into subdirectories or moving them around on disk,
users in the 70s could do everything entirely with a textual interface.

Each of these tasks required its own program or command: one to change directories (cd), another
to list their contents (ls), a third to rename or move files (mv), and so on. In order to coordinate the
execution of each of these programs, the user would connect to one single master program that
could then be used to launch any of the others. By wrapping the user’s commands this “shell”
program, as it was known, could provide common capabilities to any of them, such as the ability
to pass data from one command straight into another, or to use special wildcard characters to
work with lots of similarly named files at once. Users could even write simple code (called “shell
scripts”) which could be used to automate long series of shell commands in order to make
complex tasks easier. The original Unix shell program was just called sh, but it has been extended
and superceded over the years, so on a modern Linux system you’re most likely to be using a
shell called bash. Don’t worry too much about which shell you have, all the content in this tutorial
will work on just about all of them.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 2 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

Linux is a sort-of-descendent of Unix. The core part of Linux is designed to behave similarly to a
Unix system, such that most of the old shells and other text-based programs run on it quite
happily. In theory you could even hook up one of those old 1970s terminals to a modern Linux
box, and access the shell through that. But these days it’s far more common to use a software
terminal: that same old Unix-style text interface, but running in a window alongside your graphical
programs. Let’s see how you can do that yourself!

3. Opening a terminal
On a Ubuntu 18.04 system you can find a launcher for the terminal by clicking on the Activities
item at the top left of the screen, then typing the first few letters of “terminal”, “command”,
“prompt” or “shell”. Yes, the developers have set up the launcher with all the most common
synonyms, so you should have no problems finding it.

Other versions of Linux, or other flavours of Ubuntu, will usually have a terminal launcher located
in the same place as your other application launchers. It might be hidden away in a submenu or
you might have to search for it from within your launcher, but it’s likely to be there somewhere.

If you can’t find a launcher, or if you just want a faster way to bring up the terminal, most Linux
systems use the same default keyboard shortcut to start it: Ctrl-Alt-T.

However you launch your terminal, you should end up with a rather dull looking window with an
odd bit of text at the top, much like the image below. Depending on your Linux system the colours
may not be the same, and the text will likely say something different, but the general layout of a
window with a large (mostly empty) text area should be similar.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 3 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

Let’s run our first command. Cick the mouse into the window to make sure that’s where your
keystrokes will go, then type the following command, all in lower case, before pressing the Enter
or Return key to run it.

pwd

You should see a directory path printed out (probably something like /home/YOUR_USERNAME), then
another copy of that odd bit of text.

There are a couple of basics to understand here, before we get into the detail of what the
command actually did. First is that when you type a command it appears on the same line as the
odd text. That text is there to tell you the computer is ready to accept a command, it’s the
computer’s way of prompting you. In fact it’s usually referred to as the prompt, and you might
sometimes see instructions that say “bring up a prompt”, “open a command prompt”, “at the bash
prompt” or similar. They’re all just different ways of asking you to open a terminal to get to a shell.

On the subject of synonyms, another way of looking at the prompt is to say that there’s a line in

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 4 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

the terminal into which you type commands. A command line, if you will. Again, if you see mention
of “command line”, including in the title of this very tutorial, it’s just another way of talking about a
shell running in a terminal.

The second thing to understand is that when you run a command any output it produces will
usually be printed directly in the terminal, then you’ll be shown another prompt once it’s finished.
Some commands can output a lot of text, others will operate silently and won’t output anything at
all. Don’t be alarmed if you run a command and another prompt immediately appears, as that
usually means the command succeeded. If you think back to the slow network connections of our
1970s terminals, those early programmers decided that if everything went okay they may as well
save a few precious bytes of data transfer by not saying anything at all.

The importance of case

Be extra careful with case when typing in the command line. Typing PWD instead of pwd will produce
an error, but sometimes the wrong case can result in a command appearing to run, but not doing
what you expected. We’ll look at case a little more on the next page but, for now, just make sure
to type all the following lines in exactly the case that’s shown.

A sense of location

Now to the command itself. pwd is an abbreviation of ‘print working directory’. All it does is print
out the shell’s current working directory. But what’s a working directory?

One important concept to understand is that the shell has a notion of a default location in which
any file operations will take place. This is its working directory. If you try to create new files or
directories, view existing files, or even delete them, the shell will assume you’re looking for them in
the current working directory unless you take steps to specify otherwise. So it’s quite important to
keep an idea of what directory the shell is “in” at any given time, after all, deleting files from the
wrong directory could be disastrous. If you’re ever in any doubt, the pwd command will tell you
exactly what the current working directory is.

You can change the working directory using the cd command, an abbreviation for ‘change
directory’. Try typing the following:
cd /
pwd

Note that the directory separator is a forward slash ("/"), not the backslash that you may be used
to from Windows or DOS systems

Now your working directory is “/”. If you’re coming from a Windows background you’re probably
used to each drive having its own letter, with your main hard drive typically being “C:”. Unix-like
systems don’t split up the drives like that. Instead they have a single unified file system, and
individual drives can be attached (“mounted”) to whatever location in the file system makes most

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 5 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

sense. The “/” directory, often referred to as the root directory, is the base of that unified file
system. From there everything else branches out to form a tree of directories and subdirectories.

Too many roots

Beware: although the “/” directory is sometimes referred to as the root directory, the word “root”
has another meaning. root is also the name that has been used for the superuser since the early
days of Unix. The superuser, as the name suggests, has more powers than a normal user, so can
easily wreak havoc with a badly typed command. We’ll look at the superuser account more in
section 7. For now you only have to know that the word “root” has multiple meanings in the Linux
world, so context is important.

From the root directory, the following command will move you into the “home” directory (which is
an immediate subdirectory of “/”):
cd home
pwd

To go up to the parent directory, in this case back to “/”, use the special syntax of two dots (..)
when changing directory (note the space between cd and .., unlike in DOS you can’t just type
cd.. as one command):

cd ..
pwd

Typing cd on its own is a quick shortcut to get back to your home directory:
cd
pwd

You can also use .. more than once if you have to move up through multiple levels of parent
directories:

cd ../..
pwd

Notice that in the previous example we described a route to take through the directories. The path
we used means “starting from the working directory, move to the parent / from that new location
move to the parent again”. So if we wanted to go straight from our home directory to the “etc”
directory (which is directly inside the root of the file system), we could use this approach:
cd
pwd

cd ../../etc
pwd

Relative and absolute paths

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 6 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

Most of the examples we’ve looked at so far use relative paths. That is, the place you end up at
depends on your current working directory. Consider trying to cd into the “etc” folder. If you’re
already in the root directory that will work fine:
cd /
pwd
cd etc
pwd

But what if you’re in your home directory?

cd
pwd
cd etc
pwd

You’ll see an error saying “No such file or directory” before you even get to run the last pwd.
Changing directory by specifying the directory name, or using .. will have different effects
depending on where you start from. The path only makes sense relative to your working directory.

But we have seen two commands that are absolute. No matter what your current working
directory is, they’ll have the same effect. The first is when you run cd on its own to go straight to
your home directory. The second is when you used cd / to switch to the root directory. In fact any
path that starts with a forward slash is an absolute path. You can think of it as saying “switch to
the root directory, then follow the route from there”. That gives us a much easier way to switch to
the etc directory, no matter where we currently are in the file system:

cd
pwd
cd /etc
pwd

It also gives us another way to get back to your home directory, and even to the folders within it.
Suppose you want to go straight to your “Desktop” folder from anywhere on the disk (note the
upper-case “D”). In the following command you’ll need to replace USERNAME with your own
username, the whoami command will remind you of your username, in case you’re not sure:
whoami
cd /home/USERNAME/Desktop
pwd

There’s one other handy shortcut which works as an absolute path. As you’ve seen, using “/” at
the start of your path means “starting from the root directory”. Using the tilde character ("~") at the
start of your path similarly means “starting from my home directory”.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 7 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

cd ~
pwd

cd ~/Desktop
pwd

Now that odd text in the prompt might make a bit of sense. Have you noticed it changing as you
move around the file system? On a Ubuntu system it shows your username, your computer’s
network name and the current working directory. But if you’re somewhere inside your home
directory, it will use “~” as an abbreviation. Let’s wander around the file system a little, and keep
an eye on the prompt as you do so:

cd
cd /
cd ~/Desktop
cd /etc
cd /var/log
cd ..
cd

You must be bored with just moving around the file system by now, but a good understanding of
absolute and relative paths will be invaluable as we move on to create some new folders and files!

4. Creating folders and files

In this section we’re going to create some real files to work with. To avoid accidentally trampling
over any of your real files, we’re going to start by creating a new directory, well away from your
home folder, which will serve as a safer environment in which to experiment:
mkdir /tmp/tutorial
cd /tmp/tutorial

Notice the use of an absolute path, to make sure that we create the tutorial directory inside /tmp.
Without the forward slash at the start the mkdir command would try to find a tmp directory inside
the current working directory, then try to create a tutorial directory inside that. If it couldn’t find a
tmp directory the command would fail.

In case you hadn’t guessed, mkdir is short for ‘make directory’. Now that we’re safely inside our
test area (double check with pwd if you’re not certain), let’s create a few subdirectories:
mkdir dir1 dir2 dir3

There’s something a little different about that command. So far we’ve only seen commands that
work on their own (cd, pwd) or that have a single item afterwards (cd /, cd ~/Desktop). But this time
we’ve added three things after the mkdir command. Those things are referred to as parameters or
arguments, and different commands can accept different numbers of arguments. The mkdir
https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 8 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

command expects at least one argument, whereas the cd command can work with zero or one,
but no more. See what happens when you try to pass the wrong number of parameters to a
command:

mkdir
cd /etc ~/Desktop

Back to our new directories. The command above will have created three new subdirectories
inside our folder. Let’s take a look at them with the ls (list) command:

ls

If you’ve followed the last few commands, your terminal should be looking something like this:

Notice that mkdir created all the folders in one directory. It didn’t create dir3 inside dir2 inside
dir1, or any other nested structure. But sometimes it’s handy to be able to do exactly that, and
mkdir does have a way:

mkdir -p dir4/dir5/dir6
ls

This time you’ll see that only dir4 has been added to the list, because dir5 is inside it, and dir6 is
inside that. Later we’ll install a useful tool to visualise the structure, but you’ve already got enough
knowledge to confirm it:

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 9 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

cd dir4
ls
cd dir5
ls
cd ../..

The “-p” that we used is called an option or a switch (in this case it means “create the parent
directories, too”). Options are used to modify the way in which a command operates, allowing a
single command to behave in a variety of different ways. Unfortunately, due to quirks of history
and human nature, options can take different forms in different commands. You’ll often see them
as single characters preceded by a hyphen (as in this case), or as longer words preceded by two
hyphens. The single character form allows for multiple options to be combined, though not all
commands will accept that. And to confuse matters further, some commands don’t clearly identify
their options at all, whether or not something is an option is dictated purely by the order of the
arguments! You don’t need to worry about all the possibilities, just know that options exist and
they can take several different forms. For example the following all mean exactly the same thing:

# Don't type these in, they're just here for demonstrative purposes
mkdir --parents --verbose dir4/dir5
mkdir -p --verbose dir4/dir5
mkdir -p -v dir4/dir5
mkdir -pv dir4/dir5

Now we know how to create multiple directories just by passing them as separare arguments to
the mkdir command. But suppose we want to create a directory with a space in the name? Let’s
give it a go:

mkdir another folder

ls

You probably didn’t even need to type that one in to guess what would happen: two new folders,
one called another and the other called folder. If you want to work with spaces in directory or file
names, you need to escape them. Don’t worry, nobody’s breaking out of prison; escaping is a
computing term that refers to using special codes to tell the computer to treat particular
characters differently to normal. Enter the following commands to try out different ways to create
folders with spaces in the name:

mkdir "folder 1"

mkdir 'folder 2'
mkdir folder\ 3
mkdir "folder 4" "folder 5"
mkdir -p "folder 6"/"folder 7"
ls

Although the command line can be used to work with files and folders with spaces in their names,
the need to escape them with quote marks or backslashes makes things a little more difficult. You
can often tell a person who uses the command line a lot just from their file names: they’ll tend to

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 10 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

stick to letters and numbers, and use underscores ("_") or hyphens ("-") instead of spaces.

Creating files using redirection

Our demonstration folder is starting to look rather full of directories, but is somewhat lacking in
files. Let’s remedy that by redirecting the output from a command so that, instead of being printed
to the screen, it ends up in a new file. First, remind yourself what the ls command is currently
showing:

ls

Suppose we wanted to capture the output of that command as a text file that we can look at or
manipulate further. All we need to do is to add the greater-than character (">") to the end of our
command line, followed by the name of the file to write to:
ls > output.txt

This time there’s nothing printed to the screen, because the output is being redirected to our file
instead. If you just run ls on its own you should see that the output.txt file has been created. We
can use the cat command to look at its content:

cat output.txt

Okay, so it’s not exactly what was displayed on the screen previously, but it contains all the same
data, and it’s in a more useful format for further processing. Let’s look at another command, echo:
echo "This is a test"

Yes, echo just prints its arguments back out again (hence the name). But combine it with a redirect,
and you’ve got a way to easily create small test files:

echo "This is a test" > test_1.txt

echo "This is a second test" > test_2.txt
echo "This is a third test" > test_3.txt
ls

You should cat each of these files to theck their contents. But cat is more than just a file viewer -
its name comes from ‘concatenate’, meaning “to link together”. If you pass more than one
filename to cat it will output each of them, one after the other, as a single block of text:
cat test_1.txt test_2.txt test_3.txt

Where you want to pass multiple file names to a single command, there are some useful shortcuts
that can save you a lot of typing if the files have similar names. A question mark ("?") can be used
to indicate “any single character” within the file name. An asterisk ("*") can be used to indicate
“zero or more characters”. These are sometimes referred to as “wildcard” characters. A couple of

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 11 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

examples might help, the following commands all do the same thing:
cat test_1.txt test_2.txt test_3.txt
cat test_?.txt
cat test_*

More escaping required

As you might have guessed, this capability also means that you need to escape file names with ?
or * characters in them, too. It’s usually better to avoid any punctuation in file names if you want to
manipulate them from the command line.

If you look at the output of ls you’ll notice that the only files or folders that start with “t” are the
three test files we’ve just created, so you could even simplify that last command even further to
cat t*, meaning “concatenate all the files whose names start with a t and are followed by zero or
more other characters”. Let’s use this capability to join all our files together into a single new file,
then view it:
cat t* > combined.txt
cat combined.txt

What do you think will happen if we run those two commands a second time? Will the computer
complain, because the file already exists? Will it append the text to the file, so it contains two
copies? Or will it replace it entirely? Give it a try to see what happens, but to avoid typing the
commands again you can use the Up Arrow and Down Arrow keys to move back and forth
through the history of commands you’ve used. Press the Up Arrow a couple of times to get to the
first cat and press Enter to run it, then do the same again to get to the second.

As you can see, the file looks the same. That’s not because it’s been left untouched, but because
the shell clears out all the content of the file before it writes the output of your cat command into
it. Because of this, you should be extra careful when using redirection to make sure that you don’t
accidentally overwrite a file you need. If you do want to append to, rather than replace, the
content of the files, double up on the greater-than character:
cat t* >> combined.txt
echo "I've appended a line!" >> combined.txt
cat combined.txt

Repeat the first cat a few more times, using the Up Arrow for convenience, and perhaps add a
few more arbitrary echo commands, until your text document is so large that it won’t all fit in the
terminal at once when you use cat to display it. In order to see the whole file we now need to use
a different program, called a pager (because it displays your file one “page” at a time). The
standard pager of old was called more, because it puts a line of text at the bottom of each page
that says “–More–” to indicate that you haven’t read everything yet. These days there’s a far better
pager that you should use instead: because it replaces more, the programmers decided to call it
less.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 12 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

less combined.txt

When viewing a file through less you can use the Up Arrow, Down Arrow, Page Up, Page
Down, Home and End keys to move through your file. Give them a try to see the difference
between them. When you’ve finished viewing your file, press q to quit less and return to the
command line.

A note about case

Unix systems are case-sensitive, that is, they consider “A.txt” and “a.txt” to be two different files.
If you were to run the following lines you would end up with three files:
echo "Lower case" > a.txt
echo "Upper case" > A.TXT
echo "Mixed case" > A.txt

Generally you should try to avoid creating files and folders whose name only varies by case. Not
only will it help to avoid confusion, but it will also prevent problems when working with different
operating systems. Windows, for example, is case-insensitive, so it would treat all three of the file
names above as being a single file, potentially causing data loss or other problems.

You might be tempted to just hit the Caps Lock key and use upper case for all your file names.
But the vast majority of shell commands are lower case, so you would end up frequently having to
turn it on and off as you type. Most seasoned command line users tend to stick primarily to lower
case names for their files and directories so that they rarely have to worry about file name clashes,
or which case to use for each letter in the name.

Good naming practice

When you consider both case sensitivity and escaping, a good rule of thumb is to keep your file
names all lower case, with only letters, numbers, underscores and hyphens. For files there’s
usually also a dot and a few characters on the end to indicate the type of file it is (referred to as
the “file extension”). This guideline may seem restrictive, but if you end up using the command line
with any frequency you’ll be glad you stuck to this pattern.

5. Moving and manipulating files

Now that we’ve got a few files, let’s look at the sort of day-to-day tasks you might need to perform
on them. In practice you’ll still most likely use a graphical program when you want to move,
rename or delete one or two files, but knowing how to do this using the command line can be
useful for bulk changes, or when the files are spread amongst different folders. Plus, you’ll learn a
few more things about the command line along the way.

Let’s begin by putting our combined.txt file into our dir1 directory, using the mv (move) command:

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 13 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

mv combined.txt dir1

You can confirm that the job has been done by using ls to see that it’s missing from the working
directory, then cd dir1 to change into dir1, ls to see that it’s in there, then cd .. to move the
working directory back again. Or you could save a lot of typing by passing a path directly to the ls
command to get straight to the confirmation you’re looking for:

ls dir1

Now suppose it turns out that file shouldn’t be in dir1 after all. Let’s move it back to the working
directory. We could cd into dir1 then use mv combined.txt .. to say “move combined.txt into the
parent directory”. But we can use another path shortcut to avoid changing directory at all. In the
same way that two dots (..) represents the parent directory, so a single dot (.) can be used to
represent the current working directory. Because we know there’s only one file in dir1 we can also
just use “*” to match any filename in that directory, saving ourselves a few more keystrokes. Our
command to move the file back into the working directory therefore becomes this (note the space
before the dot, there are two parameters being passed to mv):

mv dir1/* .

The mv command also lets us move more than one file at a time. If you pass more than two
arguments, the last one is taken to be the destination directory and the others are considered to
be files (or directories) to move. Let’s use a single command to move combined.txt, all our
test_n.txt files and dir3 into dir2. There’s a bit more going on here, but if you look at each
argument at a time you should be able to work out what’s happening:

mv combined.txt test_* dir3 dir2

ls
ls dir2

With combined.txt now moved into dir2, what happens if we decide it’s in the wrong place again?
Instead of dir2 it should have been put in dir6, which is the one that’s inside dir5, which is in dir4.
With what we now know about paths, that’s no problem either:

mv dir2/combined.txt dir4/dir5/dir6
ls dir2
ls dir4/dir5/dir6

Notice how our mv command let us move the file from one directory into another, even though our
working directory is something completely different. This is a powerful property of the command
line: no matter where in the file system you are, it’s still possible to operate on files and folders in
totally different locations.

Since we seem to be using (and moving) that file a lot, perhaps we should keep a copy of it in our
working directory. Much as the mv command moves files, so the cp command copies them (again,
note the space before the dot):

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 14 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

cp dir4/dir5/dir6/combined.txt .
ls dir4/dir5/dir6
ls

Great! Now let’s create another copy of the file, in our working directory but with a different name.
We can use the cp command again, but instead of giving it a directory path as the last argument,
we’ll give it a new file name instead:

cp combined.txt backup_combined.txt
ls

That’s good, but perhaps the choice of backup name could be better. Why not rename it so that it
will always appear next to the original file in a sorted list. The traditional Unix command line
handles a rename as though you’re moving the file from one name to another, so our old friend mv
is the command to use. In this case you just specify two arguments: the file you want to rename,
and the new name you wish to use.

mv backup_combined.txt combined_backup.txt
ls

This also works on directories, giving us a way to sort out those difficult ones with spaces in the
name that we created earlier. To avoid re-typing each command after the first, use the Up Arrow
to pull up the previous command in the history. You can then edit the command before you run it
by moving the cursor left and right with the arrow keys, and removing the character to the left with
Backspace or the one the cursor is on with Delete. Finally, type the new character in place, and
press Enter or Return to run the command once you’re finished. Make sure you change both
appearances of the number in each of these lines.

mv "folder 1" folder_1

mv "folder 2" folder_2
mv "folder 3" folder_3
mv "folder 4" folder_4
mv "folder 5" folder_5
mv "folder 6" folder_6
ls

Deleting files and folders

Warning
In this next section we’re going to start deleting files and folders. To make absolutely certain that
you don’t accidentally delete anything in your home folder, use the pwd command to double-check
that you’re still in the /tmp/tutorial directory before proceeding.

Now we know how to move, copy and rename files and directories. Given that these are just test
files, however, perhaps we don’t really need three different copies of combined.txt after all. Let’s
tidy up a bit, using the rm (remove) command:

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 15 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

rm dir4/dir5/dir6/combined.txt combined_backup.txt

Perhaps we should remove some of those excess directories as well:

rm folder_*

What happened there? Well, it turns out that rm does have one little safety net. Sure, you can use it
to delete every single file in a directory with a single command, accidentally wiping out thousands
of files in an instant, with no means to recover them. But it won’t let you delete a directory. I
suppose that does help prevent you accidentally deleting thousands more files, but it does seem
a little petty for such a destructive command to balk at removing an empty directory. Luckily
there’s an rmdir (remove directory) command that will do the job for us instead:

rmdir folder_*

Well that’s a little better, but there’s still an error. If you run ls you’ll see that most of the folders

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 16 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

have gone, but folder_6 is still hanging around. As you may recall, folder_6 still has a folder 7
inside it, and rmdir will only delete empty folders. Again, it’s a small safety net to prevent you from
accidentally deleting a folder full of files when you didn’t mean to.

In this case, however, we do mean to. The addition of options to our rm or rmdir commands will let
us perform dangerous actions without the aid of a safety net! In the case of rmdir we can add a -p
switch to tell it to also remove the parent directories. Think of it as the counterpoint to mkdir -p.
So if you were to run rmdir -p dir1/dir2/dir3 it would first delete dir3, then dir2, then finally
delete dir1. It still follows the normal rmdir rules of only deleting empty directories though, so if
there was also a file in dir1, for example, only dir3 and dir2 would get removed.

A more common approach, when you’re really, really, really sure you want to delete a whole
directory and anything within it, is to tell rm to work recursively by using the -r switch, in which
case it will happily delete folders as well as files. With that in mind, here’s the command to get rid
of that pesky folder_6 and the subdirectory within it:

rm -r folder_6
ls

Remember: although rm -r is quick and convenient, it’s also dangerous. It’s safest to explicitly
delete files to clear out a directory, then cd .. to the parent before using rmdir to remove it.

Important Warning
Unlike graphical interfaces, rm doesn’t move files to a folder called “trash” or similar. Instead it
deletes them totally, utterly and irrevocably. You need to be ultra careful with the parameters you
use with rm to make sure you’re only deleting the file(s) you intend to. You should take particular
care when using wildcards, as it’s easy to accidentally delete more files than you intended. An
errant space character in your command can change it completely: rm t* means “delete all the
files starting with t”, whereas rm t * means "delete the file t as well as any file whose name
consists of zero or more characters, which would be everything in the directory! If you’re at all
uncertain use the -i (interactive) option to rm, which will prompt you to confirm the deletion of
each file; enter Y to delete it, N to keep it, and press Ctrl-C to stop the operation entirely.

6. A bit of plumbing
Today’s computers and phones have the sort of graphical and audio capabilities that our 70s
terminal users couldn’t even begin to imagine. Yet still text prevails as a means to organise and
categorise files. Whether it’s the file name itself, GPS coordintates embedded in photos you take
on your phone, or the metadata stored in an audio file, text still plays a vital role in every aspect of
computing. It’s fortunate for us that the Linux command line includes some powerful tools for
manipulating text content, and ways to join those tools together to create something more
capable still.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 17 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

Let’s start with a simple question. How many lines are there in your combined.txt file? The wc
(word count) command can tell us that, using the -l switch to tell it we only want the line count (it
can also do character counts and, as the name suggests, word counts):

wc -l combined.txt

Similarly, if you wanted to know how many files and folders are in your home directory, and then
tidy up after yourself, you could do this:
ls ~ > file_list.txt
wc -l file_list.txt
rm file_list.txt

That method works, but creating a temporary file to hold the output from ls only to delete it two
lines later seems a little excessive. Fortunately the Unix command line provides a shortcut that
avoids you having to create a temporary file, by taking the output from one command (referred to
as standard output or STDOUT) and feeding it directly in as the input to another command
(standard input or STDIN). It’s as though you’ve connected a pipe between one command’s
output and the next command’s input, so much so that this process is actually referred to as
piping the data from one command to another. Here’s how to pipe the output of our ls command
into wc:
ls ~ | wc -l

Notice that there’s no temporary file created, and no file name needed. Pipes operate entirely in
memory, and most Unix command line tools will expect to receive input from a pipe if you don’t
specify a file for them to work on. Looking at the line above, you can see that it’s two commands,
ls ~ (list the contents of the home directory) and wc -l (count the lines), separated by a vertical
bar character ("|"). This process of piping one command into another is so commonly used that
the character itself is often referred to as the pipe character, so if you see that term you now know
it just means the vertical bar.

Note that the spaces around the pipe character aren’t important, we’ve used them for clarity, but
the following command works just as well, this time for telling us how many items are in the /etc
directory:

ls /etc|wc -l

Phew! That’s quite a few files. If we wanted to list them all it would clearly fill up more than a single
screen. As we discovered earlier, when a command produces a lot of output, it’s better to use less
to view it, and that advice still applies when using a pipe (remember, press q to quit):

ls /etc | less

Going back to our own files, we know how to get the number of lines in combined.txt, but given
that it was created by concatenating the same files multiple times, I wonder how many unique

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 18 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

lines there are? Unix has a command, uniq, that will only output unique lines in the file. So we
need to cat the file out and pipe it through uniq. But all we want is a line count, so we need to use
wc as well. Fortunately the command line doesn’t limit you to a single pipe at a time, so we can
continue to chain as many commands as we need:

cat combined.txt | uniq | wc -l

That line probably resulted in a count that’s pretty close to the total number of lines in the file, if
not exactly the same. Surely that can’t be right? Lop off the last pipe to see the output of the
command for a better idea of what’s happening. If your file is very long, you might want to pipe it
through less to make it easier to inspect:

cat combined.txt | uniq | less

It appears that very few, if any, of our duplicate lines are being removed. To understand why, we
need to look at the documentation for the uniq command. Most command line tools come with a
brief (and sometimes not-so-brief) instruction manual, accessed through the man (manual)
command. The output is automatically piped through your pager, which will typically be less, so
you can move back and forth through the output, then press q when you’re finished:
man uniq

Because this type of documentation is accessed via the man command, you’ll hear it referred to as
https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 19 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

a “man page”, as in “check the man page for more details”. The format of man pages is often
terse, think of them more as a quick overview of a command than a full tutorial. They’re often
highly technical, but you can usually skip most of the content and just look for the details of the
option or argument you’re using.

The uniq man page is a typical example in that it starts with a brief one-line description of the
command, moves on to a synopsis of how to use it, then has a detailed description of each option
or parameter. But whilst man pages are invaluable, they can also be inpenetrable. They’re best
used when you need a reminder of a particular switch or parameter, rather than as a general
resource for learning how to use the command line. Nevertheless, the first line of the
DESCRIPTION section for man uniq does answer the question as to why duplicate lines haven’t
been removed: it only works on adjacent matching lines.

The question, then, is how to rearrange the lines in our file so that duplicate entries are on
adjacent lines. If we were to sort the contents of the file alphabetically, that would do the trick.
Unix offers a sort command to do exactly that. A quick check of man sort shows that we can pass
a file name directly to the command, so let’s see what it does to our file:

sort combined.txt | less

You should be able to see that the lines have been reordered, and it’s now suitable for piping
straight into uniq. We can finally complete our task of counting the unique lines in the file:

sort combined.txt | uniq | wc -l

As you can see, the ability to pipe data from one command to another, building up long chains to
manipulate your data, is a powerful tool, as well as reducing the need for temporary files, and
saving you a lot of typing. For this reason you’ll see it used quite often in command lines. A long
chain of commands might look intimidating at first, but remember that you can break even the
longest chain down into individual commands (and look at their man pages) to get a better
understanding of what it’s doing.

Many manuals
Most Linux command line tools include a man page. Try taking a brief look at the pages for some
of the commands you’ve already encountered: man ls, man cp, man rmdir and so on. There’s even
a man page for the man program itself, which is accessed using man man, of course.

7. The command line and the superuser

One good reason for learning some command line basics is that instructions online will often
favour the use of shell commands over a graphical interface. Where those instructions require
changes to your machine that go beyond modifying a few files in your home directory, you’ll
inevitably be faced with commands that need to be run as the machine’s administrator (or

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 20 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

superuser in Unix parlance). Before you start running arbitrary commands you find in some dark
corner of the internet, it’s worth understanding the implications of running as an administrator, and
how to spot those instructions that require it, so you can better gauge whether they’re safe to run
or not.

The superuser is, as the name suggests, a user with super powers. In older systems it was a real
user, with a real username (almost always “root”) that you could log in as if you had the password.
As for those super powers: root can modify or delete any file in any directory on the system,
regardless of who owns them; root can rewrite firewall rules or start network services that could
potentially open the machine up to an attack; root can shutdown the machine even if other people
are still using it. In short, root can do just about anything, skipping easily round the safeguards
that are usually put in place to stop users from overstepping their bounds.

Of course a person logged in as root is just as capable of making mistakes as anyone else. The
annals of computing history are filled with tales of a mistyped command deleting the entire file
system or killing a vital server. Then there’s the possibility of a malicious attack: if a user is logged
in as root and leaves their desk then it’s not too tricky for a disgruntled colleague to hop on their
machine and wreak havoc. Despite that, human nature being what it is, many administrators over
the years have been guilty of using root as their main, or only, account.

Don’t use the root account

If anyone asks you to enable the root account, or log in as root, be very suspicious of their
intentions.

In an effort to reduce these problems many Linux distributions started to encourage the use of the
su command. This is variously described as being short for ‘superuser’ or ‘switch user’, and
allows you to change to another user on the machine without having to log out and in again. When
used with no arguments it assumes you want to change to the root user (hence the first
interpretation of the name), but you can pass a username to it in order to switch to a specific user
account (the second interpretation). By encouraging use of su the aim was to persuade
administrators to spend most of their time using a normal account, only switch to the superuser
account when they needed to, and then use the logout command (or Ctrl-D shortcut) as soon as
possible to return to their user-level account.

By minimising the amount of time spent logged in as root, the use of su reduces the window of
opportunity in which to make a catastrophic mistake. Despite that, human nature being what it is,
many administrators have been guilty of leaving long-running terminals open in which they’ve
used su to switch to the root account. In that respect su was only a small step forward for security.

Don’t use su
If anyone asks you to use su, be wary. If you’re using Ubuntu the root account is disabled by
default, so su with no parameters won’t work. But it’s still not worth taking the risk, in case the
account has been enabled without you realising. If you are asked to use su with a username then
(if you have the password) you will have access to all the files of that user, and could accidentally
https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 21 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

delete or modify them.

When using su your entire terminal session is switched to the other user. Commands that don’t
need root access, something as mundane as pwd or ls, would be run under the auspices of the
superuser, increasing the risk of a bug in the program causing major problems. Worse still, if you
lose track of which user you’re currently operating as, you might issue a command that is fairly
benign when run as a user, but which could destroy the entire system if run as root.

Better to disable the root account entirely and then, instead of allowing long-lived terminal
sessions with dangerous powers, require the user to specifically request superuser rights on a per-
command basis. The key to this approach is a command called sudo (as in “switch user and do
this command”).

sudo is used to prefix a command that has to be run with superuser privileges. A configuration file
is used to define which users can use sudo, and which commands they can run. When running a
command like this, the user is prompted for their own password, which is then cached for a
period of time (defaulting to 15 minutes), so if they need to run multiple superuser-level commands
they don’t keep getting continually asked to type it in.

On a Ubuntu system the first user created when the system is installed is considered to be the
superuser. When adding a new user there is an option to create them as an administrator, in which
case they will also be able to run superuser commands with sudo. In this screenshot of Ubuntu
18.04 you can see the option at the top of the dialog:

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 22 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

Assuming you’re on a Linux system that uses sudo, and your account is configured as an
administrator, try the following to see what happens when you try to access a file that is
considered sensitive (it contains encrypted passwords):
cat /etc/shadow
sudo cat /etc/shadow

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 23 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

If you enter your password when prompted you should see the contents of the /etc/shadow file.
Now clear the terminal by running the reset command, and run sudo cat /etc/shadow again. This
time the file will be displayed without prompting you for a password, as it’s still in the cache.

Be careful with sudo

If you are instructed to run a command with sudo, make sure you understand what the command
is doing before you continue. Running with sudo gives that command all the same powers as a
superuser. For example, a software publisher’s site might ask you to download a file and change
its permissions, then use sudo to run it. Unless you know exactly what the file is doing, you’re
opening up a hole through which malware could potentially be installed onto your system. sudo
may only run one command at a time, but that command could itself run many others. Treat any
new use of sudo as being just as dangerous as logging in as root.

For instructions targeting Ubuntu, a common appearance of sudo is to install new software onto
your system using the apt or apt-get commands. If the instructions require you to first add a new
software repository to your system, using the apt-add-repository command, by editing files in
/etc/apt, or by using a “PPA” (Personal Package Archive), you should be careful as these sources
are not curated by Canonical. But often the instructions just require you to install software from the
standard repositories, which should be safe.

Installing new software

There are lots of different ways to install software on Linux systems. Installing directly from your
distro’s official software repositories is the safest option, but sometimes the application or version
you want simply isn’t available that way. When installing via any other mechanism, make sure
you’re getting the files from an official source for the project in question.

Indications that files are coming from outside the distribution’s repositories include (but are not
limited to) the use of any of the following commands: curl, wget, pip, npm, make, or any instructions
that tell you to change a file’s permissions to make it executable.

Increasingly, Ubuntu is making use of “snaps”, a new package format which offers some security
improvements by more closely confining programs to stop them accessing parts of the system
they don’t need to. But some options can reduce the security level so, if you’re asked to run snap

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 24 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

with any parameters other than the name of the snap, it’s worth checking exactly what the
install
command is trying to do.

Let’s install a new command line program from the standard Ubuntu repositories to illustrate this
use of sudo:

sudo apt install tree

Once you’ve provided your password the apt program will print out quite a few lines of text to tell
you what it’s doing. The tree program is only small, so it shouldn’t take more than a minute or two
to download and install for most users. Once you are returned to the normal command line
prompt, the program is installed and ready to use. Let’s run it to get a better overview of what our
collection of files and folders looks like:
cd /tmp/tutorial
tree

Going back to the command that actually installed the new program (sudo apt install tree) it
looks slightly different to those you’ve see so far. In practice it works like this:

1. The sudo command, when used without any options, will assume that the first parameter is a
command for it to run with superuser privileges. Any other parameters will be passed directly
to the new command. sudo's switches all start with one or two hyphens and must

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 25 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

immediately follow the sudo command, so there can be no confusion about whether the
second parameter on the line is a command or an option.

2. The command in this case is apt. Unlike the other commands we’ve seen, this isn’t working
directly with files. Instead it expects its first parameter to be an instruction to perform
(install), with the rest of the parameters varying based on the instruction.

3. In this case the install command tells apt that the remainder of the command line will
consist of one or more package names to install from the system’s software repositories.
Usually this will add new software to the machine, but packages could be any collection of
files that need to be installed to particular locations, such as fonts or desktop images.

You can put sudo in front of any command to run it as a superuser, but there’s rarely any need to.
Even system configuration files can often be viewed (with cat or less) as a normal user, and only
require root privileges if you need to edit them.

Beware of sudo su
One trick with sudo is to use it to run the su command. This will give you a root shell even if the
root account is disabled. It can be useful when you need to run a series of commands as the
superuser, to avoid having to prefix them all with sudo, but it opens you up to exactly the same
kind of problems that were described for su above. If you follow any instructions that tell you to
run sudo su, be aware that every command after that will be running as the root user.

In this section you’ve learnt about the dangers of the root account, and how modern Linux
systems like Ubuntu try to reduce the risk of danger by using sudo. But any use of superuser
powers should be considered carefully. When following instructions you find online you should
now be in a better position to spot those commands that might require greater scrutiny.

8. Hidden files
Before we conclude this tutorial it’s worth mentioning hidden files (and folders). These are
commonly used on Linux systems to store settings and configuration data, and are typically
hidden simply so that they don’t clutter the view of your own files. There’s nothing special about a
hidden file or folder, other than it’s name: simply starting a name with a dot (".") is enough to make
it disappear.

cd /tmp/tutorial
ls
mv combined.txt .combined.txt
ls

You can still work with the hidden file by making sure you include the dot when you specify its file
name:

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 26 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

cat .combined.txt
mkdir .hidden
mv .combined.txt .hidden
less .hidden/.combined.txt

If you run ls you’ll see that the .hidden directory is, as you might expect, hidden. You can still list
its contents using ls .hidden, but as it only contains a single file which is, itself, hidden you won’t
get much output. But you can use the -a (show all) switch to ls to make it show everything in a
directory, including the hidden files and folders:
ls
ls -a
ls .hidden
ls -a .hidden

Notice that the shortcuts we used earlier, . and .., also appear as though they’re real directories.

As for our recently installed tree command, that works in a similar way (except without an
appearance by . and ..):

tree
tree -a

Switch back to your home directory (cd) and try running ls without and then with the -a switch.
Pipe the output through wc -l to give you a clearer idea of how many hidden files and folders have
been right under your nose all this time. These files typically store your personal configuration, and
is how Unix systems have always offered the capability to have system-level settings (usually in
/etc) that can be overridden by individual users (courtesy of hidden files in their home directory).

You shouldn’t usually need to deal with hidden files, but occasionally instructions might require
you to cd into .config, or edit some file whose name starts with a dot. At least now you’ll
understand what’s happening, even when you can’t easily see the file in your graphical tools.

Cleaning up

We’ve reached the end of this tutorial, and you should be back in your home directory now (use
pwd to check, and cd to go there if you’re not). It’s only polite to leave your computer in the same
state that we found it in, so as a final step, let’s remove the experimental area that we were using
earlier, then double-check that it’s actually gone:
rm -r /tmp/tutorial
ls /tmp

As a last step, let’s close the terminal. You can just close the window, but it’s better practice to log
out of the shell. You can either use the logout command, or the Ctrl-D keyboard shortcut. If you
plan to use the terminal a lot, memorising Ctrl-Alt-T to launch the terminal and Ctrl-D to close it

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 27 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

will soon make it feel like a handy assistant that you can call on instantly, and dismiss just as
easily.

9. Conclusion
This tutorial has only been a brief introduction to the Linux command line. We’ve looked at a few
common commands for moving around the file system and manipulating files, but no tutorial could
hope to provide a comprehensive guide to every available command. What’s more important is
that you’ve learnt the key aspects of working with the shell. You’ve been introduced to some
widely used terminology (and synonyms) that you might come across online, and have gained an
insight into some of the key parts of a typical shell command. You’ve learnt about absolute and
relative paths, arguments, options, man pages, sudo and root, hidden files and much more.

With these key concepts you should be able to make more sense of any command line
instructions you come across. Even if you don’t understand every single command, you should at
least have an idea of where one command stops and the next begins. You should more easily be
able to tell what files they’re manipulating, or what other switches and parameters are being used.
With reference to the man pages you might even be able to glean exactly what the command is
doing, or at least get a general idea.

There’s little we’ve covered here that is likely to make you abandon your graphical file manager in
favour of a prompt, but file manipulation wasn’t really the main goal. If, however, you’re intrigued
by the ability to affect files in disparate parts of your hard drive with just a few keypresses, there’s
still a lot more for you to learn.

Further reading

There are many online tutorials and commercially published books about the command line, but if
you do want to go deeper into the subject a good starting point might be the following book:

The Linux Command Line <http://linuxcommand.org/tlcl.php> by William Shotts

The reason for recommending this book in particular is that it has been released under a Creative
Commons licence, and is available to download free of charge as a PDF file, making it ideal for the
beginner who isn’t sure just how much they want to commit to the command line. It’s also
available as a printed volume, should you find yourself caught by the command line bug and
wanting a paper reference.

Was this tutorial useful?

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 28 of 29
The Linux command line for beginner | Ubuntu 6/26/20, 1:09 AM

© 2020 Canonical Ltd. Ubuntu and Canonical are registered trademarks of Canonical Ltd.

https://ubuntu.com/tutorials/command-line-for-beginners#4-creating-folders-and-files Page 29 of 29