The WINDER The Beiter Winder was developed after several years of testing. One of the aims of this unique serving tool, was to design an efficient tool to be easily used by professionals or beginners.
Not only it is important that a serving tool simply serves the yarn on a string: it is much more important, HOW this is done! The yarn must have a smooth guidance; friction and tension must be adjusted extremely fine. A unique feature of the Beiter Winder is that the yarn must not be threaded through an eye: thanks to an innovative slot you have only to clip in the yarn! Another unique property of the Beiter Winder is that you can change the spool within seconds. Some of the very new and interesting features of the Beiter Winder: Easy clip in system for the yarn Extraordinary smooth guidance. Unique sliding of the disks, thanks to a new material combination. Exchangeable gliding-disks: the one to be normally used on american spools (disks with pins), the others for example on Angel serving material (disks with no pins). This will allows highest precision and guidance. Extremely fine adjustable friction and tension, thanks to the mounted puffs. (O-Rings). Easy and fast exchangeable serving spool.
The WINDER PROFI
The Winder PROFI and Winder PROFI X-HEAVY have been developed to be able to make servings extremely tight and fast. The Winder PROFI differs from the standard Winder because of 2 stainless steel rolls. The PROFI X-HEAVY has two 15mm stainless steel knobs instead of 9mm ones. All the already known features of the Beiter Winder will remain the same for the Winder PROFI Series: Easy clip in system for the yarn, Winder PROFI X-HEAVY extraordinary smooth guidance, unique sliding of the disks, highest precision and guidance, extremely fine adjustable friction and tension, easy and fast exchangeable serving spool... Due to the heavier stainless steel knobs the Winder PROFI X-HEAVY generates higher centrifugal forces while working and so it allows a tighter serving! The weight difference between the Standard Spindle (50g) and the Profi Heavy Spindle (80g) is 30g!!...60% more!! You may use two different steel Knobs, one with 9mm and one with 15mm to generate an imbalance, to make it easier to spin the Winder. Winder PROFI The Winder PROFI Series are ideal tools for professional string makers, compound archers and demanding archers. The Beiter Winder PROFI Series can be used in combination with the Beiter Twister!
Code-number: WIBL -> Winder, Blue WIPROFIBL -> Winder PROFI One Spindle is equipped with two 9mm Steel Knobs, the second one with one 9mm and WIPROFIHVY -> Winder Profi X-HEAVY one 15mm Steel Knobs (Codes on page 3) Werner Beiter Tel. +49 7720 856860 Daimlerstr. 18 Fax +49 7720 4238 DE-78083 Dauchingen www.WernerBeiter.com email: [email protected] Update 07/2007
The WINDER ACCESSORIES - SPARE PARTS Sales unit: A: assembled Winder body, with a compete set of Rolls, consisting out of roll #1, #2 and #3. 1 For Profi and Profi X-Heavy: Roll #2 and #3 made out of Stainless Steel!)
B: 1 mounted Spindle, consisting out of 2 stainless steel knobs 9mm (Profi X- 2 3
Heavy 15mm), two Puffs on Breaking Disks, 2 ea. Gliding Disks with pins and without, to be used with the respective yarn.
Installing the spindle on the Beiter Winder:
Watch the printed thread indication on the side of the Winder (pic.3). Click in the spindle only after threading the yarn through the rolls. Clicking in the spool, pay attention that the stainless steel knobs are not too tight. While threading the yarn through the slot (pic. 4), wrap it around your fingers twice and pull it once firmly into the slot. If you want to remove the yarn, pull it completely out pic.1 of the eye. Don't try to pull it out of the slot!
BEITER WINDER & SPARE PARTS
Code# Description Winder WIBL Winder, complete, Blue WIPROFIBL Winder PROFI (with Steel Rolls), complete WIPROFIHVY Winder PROFI HEAVY, komplett WISP Spindle, (2x9mm) complete pic.2 WISPST11 Spindle X-HEAVY (2x15mm) complete WISPST12 Spindle X-HEAVY imbalanced(1x9mm/1x15mm) complete Winder Sapre Parts WIEGHBL Winder, Body, Blue (not mounted) WIESCHRAUBE Winder, Body Screw WIERO Winder, Set of Rolls (#1, #2 und #3) WIESTRO Winder, Set of Steel Rolls (#2 und #3) WIEOR Winder, Set of Puffs (O-Rings) WIESCHEIBE Winder, Set of Braking-/Gliding-Disks pic.3 WIE1032 Winder, Threaded Rod #10-32 WIEKST9 Winder, Steel Knob 9mm WIEKST15 Winder, Steel Knob 15mm
The TWISTER Features of the BEITER TWISTER: The Beiter Twister is a tool, to easier serve a serving with the Beiter Winder. Developed together with the Beiter Winder, the Beiter Twister is available as an option. It is a device, which helps the archer in different ways, for example: On one side it stabilises the serving jig - your Winder! - , while serving. pic. 1 (pic.1) Than it can be engaged and used as to serve the serving faster, tighter and more accurate. (pic.2) A third option is that you can open the serving - without losing tension -, if you served too much or in the wrong way. (pic.3) pic. 2
The Beiter Twister can be ordered as a single spare part (and used an all Beiter Winder already on the market), but it can be also ordered in combination with the Beiter Winder. In any case instructions are enclosed! Instructions: Start to serve as usual. pic. 3
Install the Beiter Twister on the string and turn the black cap so, that the Beiter Twister can not leave the string (pic.4). Fix the Twister on the Winder, klicking it in on the opposite side of the slot - there are two guiding “noses” on the correct side (pic.5). pic. 4 You can engage and dis-engage the Twister from the Winder. Code-numbers: WIETWISTERBL -> Winder, Twister, Blue WIETWSITERGRBL -> Winder, Twister for Winder Profi
pic. 5
The DISTANCE HOLDER
The Beiter Distance Holder is a very handy and useful tool to separate string and cable of a Compound, to allow specific works to be done. For example installing a peep or nocking point, but esepecially to serve a serving.
Code-number: DIHOSE -> Distance Holder for Serving with 4 DH-Plugs
Das STRING-TOOL The Beiter String-Tool is a Multi-Purpose-Tool for many different funtions not just for working on your strings. The Beiter Tool Clip is an exterm handy holster for the String-Tool, which you should own in pairs ! Basically you can: split a string for Peep-Sight installation; easily count the number of strands of your string; determine the middle of the string by counting the strands so ensuring that the Peep-Sight is in the center of your string; start a serving extremely simply and quickly; serve a Beiter nocking point more easily, defining the correct starting position; use the String-Tool as a lever to ease off a rest or glue from your bow!
With the Beiter String-Tool you can easily count the strands in your string and properly install your Peep-Sight. After you have pushed the first String-Tool through the string, you can count the single strands by inserting them into the grooves on the Tool. To be able to install the Peep-Sight easier, you can use the second Beiter String-Tool generating a bigger working-window.
1993 S C M R 603 -Competent Authority is Conferred With Discretion to Decide Whether a Departmental Inquiry Through an Inquiry Officer Was Not Necessary Such Decision is Not Controlled by Any Prerequisite or Guidelines
1993 S C M R 603 -Competent Authority is Conferred With Discretion to Decide Whether a Departmental Inquiry Through an Inquiry Officer Was Not Necessary Such Decision is Not Controlled by Any Prerequisite or Guidelines
