C Igtp 825at - L
C Igtp 825at - L
C Igtp 825at - L
RJ45 port
–– Data input
Power Input
devices from being damaged by incorrect installation
24~56V DC
–– Remote power feeding up to 100m
cables, doubling that of the earlier 802.3af. It is also backward compatible with
• Supports 6KV DC Ethernet ESD protection
802.3af PoE standards to allow users to flexibly deploy standard and high powered
devices simultaneously with no need for software configuration. With data and
• -40 to 75 degrees C operating temperature
Power over Ethernet from one unit, the IGTP-825AT can reduce cable deployment
and eliminate the need for dedicated electrical outlets on the wall, ceiling or any • Plug and Play installation
unreachable place.
Power Supply
DC24-56V
DC
802.3at PoE+
Power
100m
PoE
Power Data
PoE IP Camera IGTP-825AT
1000
DC Power Line (DC) PoE 1000BASE-T UTP with PoE 1000 1000BASE-SX/LX Fiber Optic
1 1
IGTP-825AT
The SFP module (transceiver) is hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down
the Industrial 802.3at PoE+ Media Converter.
PoE
IP Camera
DC 24~56V
DC
Power
PoE
DC Power Monitoring
Center
Environmentally-hardened Design
With an industrial-level IP67-rated aluminum case, the IGTP-825AT provides a high level of immunity against electromagnetic interference and wide-ranging
temperature capability, and can protect itself from dust and water ingress. All these features ensure the highest level of reliability for mission-critical applications
in any difficult environment.
Dust-proof
Water-proof
Surge-proof
Frost-proof Vandal-proof
2
IGTP-825AT
Applications
Flexible and User-friendly PoE Deployment with Gigabit Fiber Extension
For the places difficult to find the power outlet, the IGTP-825AT provides the easiest way to power network equipment such as PTZ (pan, tilt & zoom) IP
cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network
devices that need a higher power to function normally.
With the IGTP-825AT, users can flexibly install security IP cameras, wireless access points and other IEEE 802.3af/at compliant network equipment in public
areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs.
IGTP-825AT
Internet PoE
r
ente
C
1 Surge arrester is required
and Equipment must
must be grounded
be grounded
Caution 2
The proper antenna must
be
rol
connected before powering PoE In: 802.3at PoE
the AP on Don’t turn “A” when
A B attaching “B”
nt
Dome
Co
DC
PoE
Splitter
Fiber Switch
1000
Ra
ilw
ay
1000
PoE
IGTP-825AT PoE
PTZ Speed
Fa Dome
cto IGTP-825AT
ry
y
wa
1000 1000BASE-SX/LX Fiber Optic
e
Fre
1000BASE-T UTP
PoE 1000BASE-T UTP with PoE
DC Power Line (DC)
3
IGTP-825AT
Product Specifications
Product IGTP-825AT
Hardware Specifications
Input Port (SFP Slot) 1 x 1000BASE-SX/LX/BX “Data” in SFP port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE+
Output Port “Data + DC” out RJ45 port
Interface
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
1 x 2-pin terminal block
Input Power Terminal Block
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
10BASE-T: UTP category 3, 5 cable (≤100m)
100BASE-TX: UTP category 5,5e cable (≤100m)
1000BASE-T: UTP category 5e,6 cable(≤100m)
Cables
1000BASE-SX/LX:
- Multi-mode: 50/125μm or 62.5/125μm optical fiber
- Single-mode: 9/125μm optical fiber
PWR (Green)
LED TP 10/100/1000BASE-T: LNK/ACT (Green)
Fiber 1000BASE-X: LNK (Green)
Input Voltage 24~56V DC
Voltage System on Full Load (Max.)
DC 24V 1.2W 43.2W
PowConsumption
DC 36V 1.44W 41.7W
DC 54V 1.62W 41.5W
Air 8KV DC
ESD Protection
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum metal case
Installation Wall-mount ear
150 x 43.8 x 72.94 mm
Dimensions (W x D x H)
169.85 x 43.8 x 72.94 mm, with cable gland
Weight 389g
MTBF >100000 hours
Power over Ethernet
IEEE 802.3at Power over Ethernet Plus / End-span PSE
PoE Standard
Backward compatible with IEEE 802.3af Power over Ethernet
PoE Power Output 55V DC, max. 30 watts
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 30 watts (max.) @ IEEE 802.3at PoE+ input
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
Protocols and Standards Compliance IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEC60068-2-32 (free fall)
Stability Testing IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Operating: -40~75 degrees C
Temperature
Storage: -40~85 degrees C
Operating: 5~90% (non-condensing)
Humidity
Storage: 5~90% (non-condensing)
4
IGTP-825AT
Dimensions
• IGTP-825AT without waterproof cable glands
24-56V , 2A max.
PoE+
DC Input Range:
LNK/
ACT
V+
PWR
Data
LNK IGTP-825AT
Unit: mm
DC Input Range:
LNK/
ACT
V+
PWR
Data
LNK IGTP-825AT
Unit: mm
5
IGTP-825AT
Ordering Information
IGTP-825AT Industrial IP67 1000BASE-X SFP to 10/100/1000BASE-T 802.3at PoE+ Media Converter
Related Products
IGTP-805AT 100/1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (mini-GBIC, SFP)
IGTP-802T 1000BASE-SX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (SC,MM) -- 550m
IGTP-802TS 1000BASE-LX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (SC,SM) -- 10km
IGTP-815AT Industrial Compact 100/1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Media Converter
GTP-805A 100/1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (mini-GBIC, SFP)
MGB-Series Transceiver 1000BASE-SX/LX SFP Transceiver