We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2
SRM UNIVERSITY - Ramapuram Campus
Department Of Electrical & Electronics OR
Engineering b. Design a low pass filter using Hanning window with a cut off frequency Cycle Test II of 1.2 rad / sec and N = 9 EE0303/Digital Signal Processing Year/Sem: III / V Date: 30.08.2013 Time: 90 min Marks : 50 Part – A (9 X 2 = 18 marks) Answer all the questions
1.Draw the basic butterfly diagram for DIT
2.Why FFT is needed 3.What are the differences & similarities between DIT and DIF 4.Find the DFT of sequence x(n) = {1,1,0,0} 5.The first five DFT coefficient of sequence of x(n) are X (0) = 30,X(1) = 3+j5,X (2) = 0.2+0.4j,X (3) = 0.1+0.5j,X (4) = 0.Determine the remaining coefficient for N =8 6. What are the desirable & Undesirable features of FIR filter? 7.Define Hanning & Blackmann Window function 8. What are the quantization error due to finite word length register in digital Filter? *** *** *** 9. Determine dead band of the filter Part – B (2 X 16 = 32 marks) Answer all the questions
11.a. Compute the 8 – point DFT of x(n) ={0,1,2,3,4,5,6,7}by radix -2 DIF FFT algorithm OR b. Find the DFT for the sequence x (n) = {1,1,1,2,2,3,3,3}
12.a.Determine H (z) for the response using rectangular window with N= 7
For H (ejw) = e –j3w , -∏ / 4 ≤ w ≤ ∏ / 4 = 0 , else