Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    Mini Modulo de Monitoreo 55-045

    Uploaded by

    Jose Palacios

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mini Modulo de Monitoreo 55-045

    Uploaded by

    Jose Palacios
    1 views2 pages

    Original Title

    7. Mini Modulo de Monitoreo 55-045

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views2 pages

    Mini Modulo de Monitoreo 55-045

    Uploaded by

    Jose Palacios

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DATA SHEET

    MINI MONITOR MODULE

    DESCRIPTION
    The Mini Monitor Module, P/N 55-045 & 55-050, provides a single, Class B initiating device circuit (IDC)
    capable of monitoring normally open contact fire alarm and supervisory devices or normally open
    supervisory/process devices. In addition to monitoring the connected contacts, the module will monitor the
    wiring to the device for open circuits via an end of line resistor (Class B only). The module has a single tri-
    color LED to indicate device status. The isolator version of the module, P/N 55-050, provides complete short
    circuit isolation for installations requiring NFPA, Class X wiring.

    The module is compatible with Fike’s CyberCat® and Cheetah® Xi intelligent control panels. Its operating
    parameters are configured using the panel’s programming software and are stored within non-volatile RAM
    in the module. This on-board intelligence allows each module to communicate its status directly to other
    devices connected to the panel. This peer-to-peer digital protocol results in less information that needs to APPROVALS:
    be sent between the module and the host control panel, resulting in faster, more reliable communication. • UL - S3217
    • FM
    SPECIFICATIONS • City of New York - 376-06-E
    • CSFM - 7300-2010:0101
    Normal Operating Voltage: 15 to 30 VDC
    Standby Current: 485 µA max. (continuous broadcasts)
    IDC Voltage: 5.4 VDC max.
    Alarm Current: 2 mA (red LED on)
    Maximum IDC Wiring Resistance: 100 Ω
    Temperature Range: 32 to 120°F (0 to 49°C)
    Humidity: 10 to 93% RH Noncondensing
    Dimensions: 1.31” H x 2.73” W x 0.61” D
    (33 mm H × 69 mm W × 15 mm D)
    Wire Length: 6.5 inches (165 mm)
    Accessories: 39 kΩ End of Line Resistor P/N 10-2625 included
    Mounting: Inside standard electrical box behind monitored device

    ORDERING INFORMATION
    Fike P/N Mfg P/N Description
    55-045 EM-1MM Mini Monitor Module - Non-isolator
    55-050 EM-1MMI Mini Monitor Module - Isolator
    Accessories
    20-1346 CB500 Control Module Barrier
    20-1347 SMB500 Surface Mount Box
    55-051 EA-CT IR Tool
    10-2625 39Kohm end of line assembly
    10-2530 14K short detect resistor

    Form No. P.1.93.01-4

    704 SW 10th Street  P.O. Box 610  Blue Springs, Missouri 64013-0610 U.S.A.
    Phone: 8162293405  www.fike.com
    MODULE DIMENSIONS

    WIRE COLOR DEFINITIONS


    Red (+) SLC in/out
    Red (+) SLC in/out
    Black (-) SLC in
    Purple (+) Supervised Input
    Yellow (-) Supervised Input/(-) SLC out

    Copyright © Fike Corporation All Rights Reserved. Specifications are subject to change without notice. 2 of 2
    Form No. P.1.93.01-4, April 2014. This document shall not be used for installation purposes. Please refer to installation instructions applicable for each product.

    You might also like