Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.

in ®

Chapter 6
Electromagnetic Induction
Introduction
In the early decades of the nineteenth century, experiments on electric
current by Oersted, Ampere and a few others established the fact that
electricity and magnetism are inter-related. They found that moving electric
charges produce magnetic fields.

Is the converse effect possible?

The experiments of Michael Faraday in England and Joseph Henry in USA,
demonstrated that electric currents were induced in closed coils when
subjected to changing magnetic fields. The pioneering experiments of
Faraday and Henry have led directly to the development of modern day
generators and transformers.
Electromagnetic Induction
The phenomenon in which electric current is generated by varying magnetic
fields is appropriately called electromagnetic induction.
The Experiments of Faraday and Henry
Experiment 1
A coil 𝐶1 is connected to a galvanometer G.
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®

Observations
▪ When the North-pole of a bar magnet is pushed towards the coil, the
pointer in the galvanometer deflects, indicating the presence of electric
current in the coil.
▪ The deflection lasts as long as the bar magnet is in motion.
▪ The galvanometer does not show any deflection when the magnet is
held stationary.
▪ When the magnet is pulled away from the coil, the galvanometer shows
deflection in the opposite direction, which indicates reversal of the
current’s direction.
▪ Moreover, when the South-pole of the bar magnet is moved towards or
away from the coil, the deflections in the galvanometer are opposite to
that observed with the North-pole.
▪ Further, the deflection (and hence current) is found to be larger when
the magnet is pushed towards or pulled away from the coil faster.
▪ When the bar magnet is held fixed and the coil C1 is moved towards or
away from the magnet, the same effects are observed.
Conclusion
It shows that it is the relative motion between the magnet and the coil that is
responsible for generation (induction) of electric current in the coil.
Experiment 2
The bar magnet is replaced by a second coil C2 connected to a battery. The
steady current in the coil C2 produces a steady magnetic field.

Observations
▪ As coil C2 is moved towards the coil C1 , the galvanometer shows a
deflection. This indicates that electric current is induced in coilC2 .
▪ When C2 is moved away, the galvanometer shows a deflection in the
opposite direction.
▪ The deflection lasts as long as coil C2 is in motion.
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®
▪ When the coil C2 is held fixed and C1 is moved, the same effects are
observed.
Again, it is the relative motion between the coils that induces the electric
current.

Experiment 3
Two coils C1 and C2 are held stationary. Coil C1 is connected to galvanometer
G while the second coil C2 is connected to a battery through a tapping key K.

▪ The galvanometer shows a momentary deflection when the tapping

key K is pressed. The pointer in the galvanometer returns to zero
immediately.
▪ If the key is held pressed continuously, there is no deflection in the
galvanometer.
▪ When the key is released, a momentory deflection is observed again,
but in the opposite direction.
▪ It is also observed that the deflection increases dramatically when an
iron rod is inserted into the coils along their axis.
Magnetic Flux

Magnetic flux through a plane of area A placed in a uniform magnetic field B

can be written as
𝝓𝑩 = B . A = BA cos θ
where θ is angle between B and A.
The SI unit of magnetic flux is weber (Wb) or tesla meter squared (T m2 ).
Magnetic flux is a scalar quantity.
The flux can be varied by changing any one or more of the terms B, A and θ .
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®

Faraday’s law of electromagnetic induction

The magnitude of the induced emf in a circuit is equal to the time rate of
change of magnetic flux through the circuit.
ⅆ𝛟𝐁
𝛆=− ⅆ𝐭
The negative sign indicates the direction of ε and hence the direction of
current in a closed loop.
In the case of a closely wound coil of N turns, the total induced emf ,
ⅆ𝛟
𝛆 = −𝐍 𝐁
ⅆ𝐭
The induced emf can be increased by increasing the number of turns N of a
closed coil.
Lenz’s Law
German physicist Heinrich Friedrich Lenz deduced a rule, known as Lenz’s
law which gives the polarity of the induced emf .
The statement of the law is: The polarity of induced emf is such that it tends
to produce a current which opposes the change in magnetic flux that
produced it.
When North-pole of a bar magnet is moved towards the coil, a
current is induced in the coil in such a direction that it opposes
the increase in flux. That means the face of coil (towards
magnet) should have North-polarity .So current in that face
will be anti clockwise (counter- clockwise) .

When North-pole of a bar magnet is moved away from the coil,

a current is induced in the coil in such a direction that it
opposes the decrease in flux. That means the face of coil
(towards magnet) should have South-polarity.So current in
that face will be clockwise.

When South-pole of a bar magnet is moved towards the coil,

the face of coil (towards magnet) should have South-polarity.
So current in that face will be clockwise.

When South-pole of a bar magnet is moved away from the

coil, the face of coil (towards magnet) should have North-
polarity .So current in that face will be anti clockwise
(counter- clockwise) .
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®

Lenz’s Law and Conservation of Energy

If the induced current was in the same direction changing magnetic flux, the
front face of coil gets South polarity ,when the north pole of bar magnet is
pushed into the coil .The bar magnet will then be attracted towards the coil
at a increasing acceleration and kinetic energy will continuously increase
without expending any energy. This violates the law of conservation of
energy and hence can not happen.
The current induced in the coil is opposite to the direction of changing
magnetic flux. Then the bar magnet experiences a repulsive force due to the
induced current. Therefore, a person has to do work in moving the magnet.
This energy(work) is dissipated by Joule heating produced by the induced
current.Thus Lenz’s law is in accordance with law of conservation of energy.
Motional Electromotive Force
When a conducting rod is moved through a constant magnetic field, an emf
is developed between the ends of the rod. This emf is known as Motional
Emf.

Consider a straight conductor moving in a uniform and time independent

magnetic field.The magnetic flux Φ enclosed by the loop PQRS,
ϕ= 𝐵𝑙𝑥
Since x is changing with time, the rate of change of flux Φ will induce an emf
given by:
dϕ d
ε = − B = (𝐵𝑙𝑥)
dt dt

𝑑𝑥
𝜀 = −𝐵𝑙
𝑑𝑡
− dx
v= is the speed of the conductor
dt
𝜺 = 𝑩𝒍𝒗
The induced emf Blv is called motional emf.
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®

Inductance
An electric current can be induced in a coil by flux change produced by the
same coil or a flux change produced by a neighbouring coil .These
phenomenon are respectively called self induction and mutual induction. In
both the cases, the flux through a coil is proportional to the current.
𝜙αI
𝝓 =L I
The constant of proportionality, in this relation, is called inductance.
Inductance is a scalar quantity. It has the dimensions of [M L2 T–2 A–2] .
The SI unit of inductance is henry and is denoted by H

Self-Inductance
The phenomenon of production of induced emf in an isolated coil by
varying current through the same coil is called self-induction.
The flux linked with the coil is proportional to the current through the coil.
𝜙α I
𝝓 = L I -------------(1)
where constant of proportionality L is called self-inductance of the coil. It is
also called the coefficient of self-induction of the coil.
When the current is varied, the flux linked with the coil also changes and an
emf is induced in the coil.
dϕ
For N turns, ε=−
dt
dLI
ε=−
dt
ⅆ𝐈
𝛆 = −𝐋 ⅆ𝐭 -----------(2)
Thus, the self-induced emf always opposes any change (increase or
decrease) of current in the coil.
Self-Inductance of a Long Solenoid
Consider a solenoid of cross sectional area A and length l, having n turns per
unit length.
The total flux linked with N turns of the solenoid ,
𝜙 = 𝑁𝐵 𝐴
B = 𝜇0 n I
N=n𝑙
𝜙 = 𝑛𝑙 (𝜇0 n I ) 𝐴
𝜙 = 𝜇0 n2 A𝑙I ------------(1)
But, 𝜙 = LI -----------------(2)
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®
From eq (1) and (2)
LI = 𝜇0 n2 A𝑙I
L= 𝝁𝟎 𝐧𝟐 𝐀𝒍 -----------(3)
If we fill the inside of the solenoid with a material of relative permeability 𝜇𝑟
(for example soft iron, which has a high value of relative permiability), then,
L=𝝁𝒓 𝝁𝟎 𝐧𝟐 𝐀𝒍-----------(4)
The self-inductance depends on geometry of coil and on the
permeability of the medium.

Back emf
The self-induced emf is also called the back emf as it opposes any change in
the current in a circuit. Physically, the self-inductance plays the role of
inertia. Self inductance is the electromagnetic analogue of mass in
mechanics. So, work needs to be done against the back emf (ε ) in
establishing the current. This work done is stored as magnetic potential
energy.

Energy stored in an inductor

dW
= |ε|I
dt
dI
But, |ε| = L
dt
dW dI
= LI
dt dt
I dI
W = ∫ dW=∫0 LI
dt
𝟏
W = 𝐋𝐈𝟐
𝟐
1
This expression is analogous to mv 2 , kinetic energy of a particle of mass m,
2
and shows that L is analogus to m (i.e., L is electrical inertia and opposes
growth and decay of current in the circuit).
Mutual inductance
The phenomenon of production of induced emf in a coil by varying the
current through a neighbouring coil is called mutual-induction.
The flux linked with the coil is proportional to the current through the
neighbouring coil.
ϕαI
𝛟 = MI
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®
where constant of proportionality M is called mutual-inductance of the coil.
It is also called the coefficient of mutual-induction of the coil.
When the current in the nighbouring coil is varied, the flux linked with the
first coil changes and an emf is induced in the coil.
ⅆ𝐈
𝛆 = −𝐌 ⅆ𝐭
Mutual inductance of two co-axial solenoids

Two long co-axial solenoids of same length 𝑙.

Inner solenoid 𝑆1 of radius 𝑟1 and the number of turns per unit length 𝑛1 .
Outer solenoid 𝑆2 of radius 𝑟2 and the number of turns per unit length 𝑛2 .

The current 𝐼2 in 𝑆2 sets up a magnetic flux in 𝑆1 .

𝜙1 = 𝑁1 𝐵2 𝐴1
𝐵2 = 𝜇0 𝑛2 𝐼2
𝑁1 =𝑛1 𝑙
𝜙1 = (𝑛1 𝑙) (𝜇0 𝑛2 𝐼2 ) 𝐴1
𝜙1 = 𝜇0 𝑛1 𝑛2 𝐴1 𝑙𝐼2 -------------(1)
But, 𝜙1 = 𝑀12 𝐼2 -------------(2)
From eq(1) and (2)
𝑀12 𝐼2 = 𝜇0 𝑛1 𝑛2 𝐴1 𝑙𝐼2
𝑴𝟏𝟐 = 𝝁𝟎 𝒏𝟏 𝒏𝟐 𝐴1 𝒍
Similarly we get
𝑴𝟐𝟏 = 𝝁𝟎 𝒏𝟏 𝒏𝟐 𝑨𝟏 𝒍 where 𝐴1 = 𝜋𝑟12
(The flux due to the current I1 in S1 can be assumed to be confined solely inside S1 since the solenoids are very
long. So we can take A= πr12 itself)

𝑴𝟏𝟐 = 𝑴𝟐𝟏 = 𝑴
If a medium of relative permeability 𝜇𝑟 is introduced inside the solenoid ,
M =𝝁𝒓 𝝁𝟎 𝒏𝟏 𝒏𝟐 𝑨𝟏 𝒍
 Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®

AC Generator

An ac generator converts mechanical energy into electrical energy. . It

consists of a coil which is mechanically rotated in the uniform magnetic field
by some external means. The rotation of the coil causes the magnetic flux
through it to change, so an emf is induced in the coil.
The magnetic flux at any time t is
ϕ = BA cos θ = BA cos ωt
From Faraday’s law, the induced emf for the rotating coil of N turns is
dϕ
ε = −N
dt
d
ε = −N BA cos ωt
dt
d
ε = −NBA cos ωt
dt

ε = NBAω sinω t
ε = 𝛆𝟎 sin𝛚 t
where ε0 =NBAω is the maximum value of the emf.

ω = 2πν , ν=frequency of revolution of the generator’s coil

The direction of the current changes periodically and therefore the current
is called alternating current (ac).
Join Now: https://join.hsslive.in/group Downloaded from www.Hsslive.in ®