Features Analog output of the ITV can be monitored by the PLC corresponding to the source type.
PLC
Wiring Brown (1) Vs: Power supply 24 VDC Blue (3) S: Input signal 4 to 20 mA DC (ITVm0m0-04) 0 to 20 mA DC (ITVm0m0-14) White (2) 0 to 5 VDC (ITVm0m0-24) 0 to 10 VDC (ITVm0m0-34) Black (4) A: Output signal 4 to 20 mA DC
To ensure the safest possible operation of this product, please be sure to thoroughly read the Caution “Safety Instructions” in our “Best Pneumatics” catalog before use.
4-14-1, SOTO-KANDA, CHIYODA-KU, TOKYO 101-0021, JAPAN URL: http://www.smcworld.com SP164X-009E
Specifications (Pressure, flow rate, and relief characteristics are equivalent to the standard product. Refer to the Web Catalog.)
ITV1010 ITV1030 ITV1050
Model ITV2010 ITV2030 ITV2050 ITV3010 ITV3030 ITV3050 Minimum supply pressure Set pressure + 0.1 MPa Maximum supply pressure 0.2 MPa 1.0 MPa Set pressure range *1 0.005 to 0.1 MPa 0.005 to 0.5 MPa 0.005 to 0.9 MPa Voltage 24 VDC ±10% Power supply Current consumption 0.12 A or less Current type 4 to 20 mA DC, 0 to 20 mA DC Input signal Voltage type 0 to 5 VDC, 0 to 10 VDC Current type 250 Ω or less Input impedance Voltage type Approx. 6.5 kΩ Output signal (Monitor output) Analog output: 4 to 20 mA DC (Source type) Linearity ±1%F.S. or less Hysteresis 0.5%F.S. or less Repeatability ±0.5%F.S. or less Sensitivity 0.2%F.S. or less Temperature characteristics ±0.12%F.S./°C or less Output pressure Accuracy ±2%F.S. ±1 digit or less display *2 Minimum unit MPa: 0.001, kgf/cm2: 0.01, bar: 0.01, psi: 0.1 *3, kPa: 1 Ambient and fluid temperatures 0 to 50°C (No condensation) Enclosure IP65 ITV10m0 Approx. 250 g (without options) Weight ITV20m0 Approx. 350 g (without options) ITV30m0 Approx. 645 g (without options) *1 When the product is in an “as-shipped” condition, the output pressure when a 0% input signal is applied is 0 kPa. However, there are some cases in which there is a residual pressure of 0.005 MPa or less. If the pressure needs to be reduced to 0 kPa, install a 3-port valve on the output side to exhaust the residual pressure. *2 The adjustment of a numerical value such as zero or span adjustment is set based on the minimum unit of the output pressure display. (Example: 0.001 to 0.500 MPa) Note that this unit cannot be changed. *3 The minimum unit for 0.9 MPa (130 psi) types is 1 psi. * T he above characteristics are confined to the static state. When air is consumed on the output side, the pressure may fluctuate.
How to Order (CE-compliant product)
ITV 3 0 1 0 0 4 2 S X256 Model Analog output 4 to 20 1 1000 type mA DC (Source type) 2 2000 type 3 3000 type Pressure display unit Nil MPa Pressure range 2*1 kgf/cm2 1 0.1 MPa 3 bar 3 0.5 MPa 4*1 psi 5 0.9 MPa 5 kPa *1 This is only for overseas sales as SI units are to be used within Japan under Japan’s Power supply voltage New Measurement Act. 0 24 VDC Cable connector type Input signal S Straight type 3 m 0 Current type 4 to 20 mA DC L Right angle type 3 m 1 Current type 0 to 20 mA DC N Without cable connector 2 Voltage type 0 to 5 VDC 3 Voltage type 0 to 10 VDC Bracket Nil Without bracket Monitor output B Flat bracket 4 Analog output 4 to 20 mA DC (Source type) C L-bracket
Thread type Port size
Nil Rc 1 1/8 (1000 type) N NPT 2 1/4 (1000, 2000, 3000 type) T NPTF 3 3/8 (2000, 3000 type) F G 4 1/2 (3000 type) Electro-pneumatic Regulator P.G. information Point to Group Specialized Product ITV1000/2000/3000-m4mmmmm-X256
Dimensions [mm]
ITV1000
Setting part
Cable connection thread
(Plug type)
Digital pressure display
Solenoid valve EXH
Solenoid valve EXH
SUP port, OUT port EXH port
4 x M4 x 0.7 depth 6 Electro-pneumatic Regulator P.G. information Point to Group Specialized Product ITV1000/2000/3000-m4mmmmm-X256
Dimensions [mm]
ITV2000
Setting part
Cable connection thread
(Plug type) Digital pressure display
Solenoid valve EXH
Solenoid valve EXH
SUP port, OUT port EXH port
4 x M5 x 0.8 depth 6 Electro-pneumatic Regulator P.G. information Point to Group Specialized Product ITV1000/2000/3000-m4mmmmm-X256
