Document number V4771-Z-MA-001 section 2

TABLE OF CONTENTS Revision: 0

Page: 1

Vol. Section Title Add. code Rev. Document number

Other document number

2 Data Sheets
Product Data Sheet, 30T A-Frame 0 V4771-Z-DS-001
Product Data Sheet, Active Heave Compensated Winch 0 V4772-Z-DS-001
W-AHC-H-10mT-3000m-Ø38-0.67m/s
Product Data Sheet, Hydraulic Power Unit 0 V4773-Z-DS-001

R5488 Skandi Commander

V4771 30T A-Frame

www.nov.com
 Technical Description
10/30T A-Frame

RIG/PLANT REFERENCE REFERENCE DESCRIPTION

Skandi Commander V4771 30T A-Frame
ADDITIONAL CODE SDRL CODE TOTAL PGS
4 This document contains proprietary and confidential National Oilwell Varco Norway AS
information which belongs to National Oilwell Varco; it is Postboks 401, Lundsiden
REMARKS loaned for limited purposes only and remains the property
of National Oilwell Varco. Reproduction, in whole or in N-4604 Kristiansand
MAIN TAG NUMBER DISCIPLINE part; or use of this design or distribution of this information Norway
to others is not permitted without the express written
consent of National Oilwell Varco. This document is to be
CLIENT PO NUMBER returned to National Oilwell Varco upon request and in Phone +47 38 19 20 00
any event upon completion of the use for which it was Fax +47 38 19 26 04
loaned.
© Copyright National Oilwell Varco - 2011

CLIENT DOCUMENT NUMBER DOCUMENT NUMBER REV

V4771-Z-SA-001 0
 Document number V4771-Z-SA-001
Revision 0
Page 2 of 4

REVISION HISTORY

0 11.03.2011 Issued for Approval SODE CCL CCL

Rev Date (dd.mm.yyyy) Reason for issue Prepared Checked Approved

CHANGE DESCRIPTION

Revision Change description

0
 Document number V4771-Z-SA-001
Revision 0
Page 3 of 4

TABLE OF CONTENTS

1 INTRODUCTION ............................................................................................................... 4
1.1 Purpose .................................................................................................................. 4
2 BRIEF OVERALL DESCRIPTION .................................................................................... 4
3 DETAILED DESCRIPTION ............................................................................................... 4
3.1 Mechanical Description ........................................................................................... 4
3.2 Hydraulic Description .............................................................................................. 4
3.3 Control System / PLC Software Description............................................................ 4
3.4 Electrical Description .............................................................................................. 4
 Document number V4771-Z-SA-001
Revision 0
Page 4 of 4

1 INTRODUCTION

1.1 Purpose

The purpose of this procedure is to describe the design and function of the National
Oilwell Varco A-frame, to give a better understanding of the different component
interactions and to act as an introduction to the operating instructions.

2 BRIEF OVERALL DESCRIPTION

The National Oilwell Varco A-frame is designed for operating in rough marine
environment. The design is made with focus on long life time, easy maintenance and an
optimized construction with regards to weight and strength. The A-frame is designed for
various lifting tasks. The top girder is equipped with sheave, mounted in a single hinged
bracket underneath the Top Girder. The flood light mounted underneath top girder gives
necessary illumination on the deck and the area around the stern of the ship.

3 DETAILED DESCRIPTION

3.1 Mechanical Description

The A-frame consists of starboard and port side jib legs which are connected with a top
girder. The pivot points are near deck level and the mounting is at the stern of the ship.
The foundation for Jib legs and cylinder are welded to the deck.

3.2 Hydraulic Description

The A-frame is equipped with two cylinders that rotate the A-frame from aft to forward
position. Each cylinder is equipped with counter balance valve.

3.3 Control System / PLC Software Description

The A-frame can be operated from two locations: From the control cabinet and by
remote control.

3.4 Electrical Description

There is a 230V/60Hz/3ph supply for the floodlights on the top beam and an auxiliary
supply of 230V/60Hz/3ph.
 Product Data Sheet
Active Heave Compensated Winch
W-AHC-H-10mT-3000m-Ø38-0.67m/s

RIG/PLANT REFERENCE REFERENCE DESCRIPTION

Skandi Commander V4772 AHC Winch 10T-3000m
ADDITIONAL CODE SDRL CODE TOTAL PGS
3 This document contains proprietary and confidential National Oilwell Varco Norway AS
information which belongs to National Oilwell Varco; it is Postboks 401, Lundsiden
REMARKS loaned for limited purposes only and remains the property
of National Oilwell Varco. Reproduction, in whole or in N-4604 Kristiansand
MAIN TAG NUMBER DISCIPLINE part; or use of this design or distribution of this information Norway
to others is not permitted without the express written
consent of National Oilwell Varco. This document is to be
CLIENT PO NUMBER returned to National Oilwell Varco upon request and in Phone +47 38 19 20 00
any event upon completion of the use for which it was Fax +47 38 19 26 04
loaned.
© Copyright National Oilwell Varco - 2011

CLIENT DOCUMENT NUMBER DOCUMENT NUMBER REV

V4772-Z-DS-001 0

www.nov.com
 Document number V4772-Z-DS-001
Revision 0
Page 2 of 3

REVISION HISTORY

0 02.02.2011 For Information TONP CCL CCL

Rev Date (dd.mm.yyyy) Reason for issue Prepared Checked Approved

CHANGE DESCRIPTION

Revision Change description

0

www.nov.com
 Document number V4772-Z-DS-001
Revision 0
Page 3 of 3

DESIGN DATA
1. Service Main Winch 10mT-3000m AHC
2. Area classification Safe Zone
3. Design code / standard DNV Lifting Appliances / FEM / NS-EN ISO 9001
IEC/CENELEC
4. Rules and regulations DNV, Rules for Cert. of Lifting Appliances 2008
5. Environment Marine, on ships deck
6. Design temperature -10 deg. C
7. Operating temperature -10 to +45 deg. C
8. Safety Devices Emergency Stop
9. SWL kg 10 000
10. Weight, wire kg 21 000
11. Weight winch, without wire kg 13 000
12. Weight winch, incl wire kg 34 000
13. Equipment shipment size of winch 3026x4345x3025
( L x W x H) mm
14. UTILITY CONSUMPTIONS
15. Max. Hydr. flow rate l/min. 780
16. Min. working pressure bar 260
17. Max. operating pressure bar 300
18. CONSTRUCTION
19. Code DNV Lifting Appliances
20. Certifying authority NA
21. Equipment Category AHC Hoisting Winch
22. MANUFACTURER MAIN ITEMS
23. Pipes / Fittings Acc. to drw. V4772-H0003
24. Hoses Acc. to drw. V4772-H0003
25. Hydraulic Motor Rexroth A2FM 200/63W-VAB010
26. Winch Gear Brevini SLW6003/G3/94/FLs960. 10C-OR-AD
Brevini SLW6003/G3/94/FLs960. 10C-AO-AD
27. Hydraulic Cylinders Spooling Device Cylinder
HMS-C-D-125/80x1830(+30)-C-R
28. Control Valve Assembly LocoMec WINCH BLOCK, 960 L/MIN.
29. SURFACE PROTECTION
30. Sandblasting Ref HLA-4A System no. 1
31. Paint Specification and System No. Ref HLA-4A System no. 1
32. Top Coat Colour To be clarified
33. LUBRICATION/HYDRAULIC FLUID
34. Grease type, bearing Texaco Multifac EP2
35. Wire Lubrication Bridon 60, 70 or similar
36. Hydr. Oil type Tellus 46
37. Cleanliness requirement NAS 1638 Class 8
38. INSPECTION AND TESTING
39. Factory Acceptance Test NA
40. Pressure Testing See document No.: V4772-KA-005
41. Load testing See document No.: V4772-KA-005
42. NOTES
43.
44.

www.nov.com
 Product Data Sheet
Hydraulic Power Unit

RIG/PLANT REFERENCE REFERENCE DESCRIPTION

Skandi Commander V4773 Hydraulic Power Unit
ADDITIONAL CODE SDRL CODE TOTAL PGS
3 This document contains proprietary and confidential National Oilwell Varco Norway AS
information which belongs to National Oilwell Varco; it is Postboks 401, Lundsiden
REMARKS loaned for limited purposes only and remains the property
of National Oilwell Varco. Reproduction, in whole or in N-4604 Kristiansand
MAIN TAG NUMBER DISCIPLINE part; or use of this design or distribution of this information Norway
to others is not permitted without the express written
consent of National Oilwell Varco. This document is to be
CLIENT PO NUMBER returned to National Oilwell Varco upon request and in Phone +47 38 19 20 00
any event upon completion of the use for which it was Fax +47 38 19 26 04
loaned.
© Copyright National Oilwell Varco - 2011

CLIENT DOCUMENT NUMBER DOCUMENT NUMBER REV

V4773-Z-DS-001 0

www.nov.com
 Document number V4773-Z-DS-001
Revision 0
Page 2 of 3

REVISION HISTORY

0 16.02.2011 For Information TONP PHM YNB

Rev Date (dd.mm.yyyy) Reason for issue Prepared Checked Approved

CHANGE DESCRIPTION

Revision Change description

0

www.nov.com
 Document number V4773-Z-DS-001
Revision 0
Page 3 of 3

1. DESIGN DATA
2. Service Supply hydraulic oil to A-Frame and Main Winch
3. Design code / standard QSS NS-EN ISO 9001, 1994 certified by DNV
4. Specification According to Project Specification
5. Environmental loads According to project specification.
6. Area classification Safe zone
7. Design Temperature -10 deg.C.
8. Operating Temperature -10/+45 deg.C.
9. Environment indoor
10. Tank volume litre 3700
11. Max normal oil level litre 3000
12. Max. flow rate l/min. 130/40/900 Open Loop
13. Normal operating pressure barg. 5/120/350
14. Voltage V 690
15. Frequency Hz 60
16. Electrical power kW 362 (S1-100%) 470(S6-40%)
17. Protection motors and junction boxes IP 55
18. Protection instrumentation IP 55
19. Weight, dry kg 5510
20. Equipment size ( L x W x H) mm 3800 x 2680 x 2391
21. CONSTRUCTION
22. Code N/A
23. Certifying authority N/A
24. Equipment Category N/A
25. MANUFACTURER MAIN ITEMS
26. Pipes / Fittings Acc to Piping spec HL/A-04A
27. Hoses Acc to Piping spec HL/A-04A
28. Main pumps Variable piston pumps
29. Cooling pump Screw spindle pump
30. SURFACE PROTECTION
31. Sandblasting: NOV HLA-A4 rev7
32. Paint Specification: NOV HLA-A4 rev7
33. Colour: Interfine 979 Bluewith C000
34. LUBRICATION/HYDRAULIC FLUID
35. Hydraulic fluid Tellus 46
36. Temperatur -10/+45 deg. Celsius
37. Density 0.87 kg/m3
38. COOLER
39. Cooling medium/type Air
40. Max inlet temperature 39 deg. Celsius
41. Required cooling medium flow rate N/A
42. Max oil flow 1000 l/min
43. Water pressure N/A
44. Max heat transfer at max oil temp 90 kW
45. INSPECTION AND TESTING
46. FAT Yes
47. DRAWING REFERENCES
48. General Arrangement V4773-D1110-G0001
49. Hydraulic flow diagram V4773-D1110-H0001
50. Block Diagram Electrical V4773-E0001, V4773-E010
51. NOTES
52.

www.nov.com