203 - Ventilation Product Catalogue For Professionals

Ventilation
Product catalogue 2023

for professionals
Fresh air for the commercial sector

Heat recovery ventilation and air handling applications
2
INTRODUCTION
DECENTRALIZED VENTILATION
SOLUTIONS
Introduction4
CENTRALIZED VENTILATION
The widest ventilation range on the market 8
SOLUTIONS
Decentralized ventilation solutions 10
Modular T 10
Modular L 11
VAM-FC9/VAM-J812
EKVDX-A14
DX AIR HANDLING UNIT

Table
SOLUTIONS
VKM-GBM16
of contents Centralized ventilation solutions 22
Professional28
Modular P 30
Modular R 31
TOOLS & PLATFORMS

DX Air Handling Unit solutions 32
Tools and platforms 43
Technical drawings 51
TECHNICAL DRAWINGS
PREVIOUS
3
Why
Indoor Air Quality?
• Indoor Air Quality (IAQ) is a measure of the air quality indoors, as breathed in by the building’s occupants.
• New residential buildings, schools, offices or light commercial buildings often neglect indoor air quality.
• Because of pollutants, such as pollen, bacteria and others, the indoor air quality can be 2 to 5 times worse than outdoors.
• Since 90% of our lives is spent indoors, it is crucial to invest in good air quality.
5 components
for ensuring good Indoor Air Quality
Delivers the required
conditioned air to optimise
the energy efficiency of
indoor HVAC equipment
AIR
Ensures the provision
of fresh and clean
PROCESSING
outdoor air and removes
contaminated air
VENTILATION HUMIDIFICATION
Ensures the desired
moisture level in the
conditioned space
Delivers energy savings by
transferring heat and moisture
between airflows, thus helping
to condition the supply
ENERGY FILTRATION &
air to the required indoor RECOVERY PURIFICATION Ensures clean and healthy
temperature and humidity air by filtering out pollen,
levels dust, odours and other
contaminants that are
harmful to our health
Ventilation
Ventilation systems ensure optimal climate conditions by
providing a fresh, healthy and comfortable environment for
buildings of all sizes and applications. When a room is enclosed, air
cannot easily enter or leave, allowing airborne pollutants to remain
and accumulate within the space. This concentration could have
an impact on the health of the room’s occupants. Ventilation is
essential for diluting and removing these pollutants.
A well-maintained ventilation system and adequate air-

exchange rate have been demonstrated to be an effective solution
to protect people from contaminants, including viruses.
4
Fresh air portfolio
INTRODUCTION
Products overview
150 500 1,000 2,000 2,500 3,000 3,500 4,000 15,000 25,000 140,000 [m3/h]
SOLUTIONS
› Superior IAQ level: up to three stage filtration on supply side
› DX coil integration for a unique Daikin fresh air package
NEW › Plug&Play control solution, for a quick and easy start-up
MODULAR T 200 m³/h up to 4,200 m³/h
SOLUTIONS
› High efficiency counterflow heat exchanger
› VDI 6022 Certified
Decentralised systems
› Compact design for false ceiling installation

MODULAR L 150 m³/h up to 3,400 m³/h
› Compact size
› High energy efficient paper recovering sensible and latent heat
› EC fan motors

› Filter clogging alarm based on pressure
SOLUTIONS
VAM-FC9 / VAM-J 150 m3/h up to 2,000 m3/h
› DX coil for post-treatment of fresh air

› Split up concept increases application flexibility
› Integrates both in R-32 and R-410A VRV systems
VAM + DX COIL 500 m3/h up to 2,000 m3/h
› With DX coil for post-treated fresh air
TOOLS & PLATFORMS

› Increased comfort
› Humidifier option
VKM-GBM 500 m3/h up to 1,000 m3/h
› Fully customizable
› Daikin Digital Plug & Play Control as option
› With DX or water coil option
D-AHU PROFESSIONAL 750 m3/h up to 144,000 m3/h
Centralised systems
TECHNICAL DRAWINGS
› High efficiency aluminium plate heat exchanger

› Pre-configured sizes
› Plug & Play pre-configured controls
D-AHU MODULAR P 500 m³/h up to 25,000 m³/h
› Rotary heat exchanger (sorption and sensible technology)

› Pre-configured sizes
› Plug & Play pre-configured controls
PREVIOUS
D-AHU MODULAR R 500 m3/h up to 25,000 m3/h
5
5 reasons
why Daikin’s ventilation range
is unique in the market
1 Market leading controls

& connectivity
› Interlock of ventilation and air conditioning system
• Control ERV/HRV and air conditioning from
the same controller
• Aligns the operation mode between the systems
to save energy
› Easy integration in the total solution
• Online control and monitoring via the Daikin Cloud Service
• Full portfolio integration in the intelligent Touch Manager,
Daikin's cost-effective mini BMS
› User-friendly controller with premium design
• Intuitive touch button control
21°C
2 Unique installation benefits

› Integrates seamlessly in the Daikin total solution,
ensuring a single point of contact
› Total fresh air solution with Daikin supplying the VAM/Modular L Smart,
Modular T and the electrical heater
› Daikin AHU and condensing unit connect Plug & Play thanks to same
pipe diameters, factory mounted controls, expansion valves, etc.
6
INTRODUCTION
SOLUTIONS
SOLUTIONS
3 High energy efficiency Up to
›
›
Energy recovery of up to 92%, reducing running costs
Free nighttime cooling using fresh outside air 92%
energy
› Inverter driven centrifugal fans
› ErP compliant recovery

4 Best comfort
SOLUTIONS
› Wide range of units to control fresh air and humidity
› Wide range of optional filters to suit the application available up to ePM1 80% (F9)
› Special paper heat exchanger recovers heat and moisture from extract air
to warm up and humidify fresh air to comfortable levels (VAM, VKM)
TOOLS & PLATFORMS

5 Top reliability
› Most extensive testing before new units leave the factory
ErP
› Widest support network and after sales service COMPLIANT
› All spare parts available in Europe
TECHNICAL DRAWINGS
COGNITIVE FUNCTION SCORES …

Did you know?
CO2 levels and ventilation rates all have significant,

independent impacts on cognitive function: + 61% + 101%
IN GREEN BUILDING IN ENHANCED
PREVIOUS
CONDITIONS GREEN BUILDING CONDITIONS
7
Widest range of DX integrated
ventilation on the market
Daikin offers a variety of solutions from small energy recovery

ventilation to large-scale air handling units for the provision
of fresh air ventilation to homes, or commercial premises.
Ventilation solutions
Daikin offers state-of-the-art ventilation solutions that can easily be integrated

into any project:
› Unique portfolio within DX manufacturers
› High-quality solutions complying with the highest Daikin quality standards
› Seamless integration of all products to provide the best indoor climate
› All Daikin products connected to a single controller for complete control
of the HVAC system.
Energy Recovery Ventilation
Our energy recovery units recover sensible energy (Modular L / Modular T) or

total (sensible + latent) energy (VAM/EKVDX/VKM-GBM), substantially reducing
the load on the air conditioning system up to 40%.
Ventilation with DX connection - Control over fresh air temperature
Daikin offers a range of inverter condensing units to be used in combination with

Daikin AHUs for ultimate control over the fresh air. There are 4 control possibilities
when combining AHU and Daikin outdoor units hence offering all the required
flexibility for any installation. Indoor units can be combined to the same outdoor
unit to reduce the installation costs. For false-ceiling installations where space
is a constraint, the VKM can fit perfectly to deliver fresh air at a comfortable
temperature and it has an optional humidification element.
8
9
DX AIR HANDLING UNIT CENTRALIZED VENTILATION DECENTRALIZED VENTILATION
PREVIOUS TECHNICAL DRAWINGS TOOLS & PLATFORMS INTRODUCTION
SOLUTIONS SOLUTIONS SOLUTIONS
Air handling units
Modular T
Top connected heat recovery unit
Highlights
› 5 Predefined sizes
› Plug & Play control solution
› Compact unit from 550 mm width (for unit up to 1,100 m3/h)
› Wide air flow coverage from 200 to 4,200 m3/h
› Right and left configuration
› Pro (open control platform) and Smart
(Daikin control platform) version
› Excellent indoor air quality (IAQ). Up to three filtration stages:
more than 90% PM1 in outdoor air are deleted achieving
the best IAQ Modular T
› DX and water coil available as option
› Recirculation mixing damper (option)
› › BIM file available at www.daikin.eu/BIM
Air flow range
3,900
Size 07
2,700
Size 06
2,300
Size 05
1,650
Size 04
800
Size 03
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500m3/h

From 200 up to 4,200 m /h 3
Nominal air flow m /h3
Technical details
More details and final information

can be found by scanning or
clicking the QR codes. Modular T
Modular T ATB03*A* ATB04*A* ATB05*A* ATB06*A* ATB07*A*
Size1 03 04 05 06 07
Airflow m3/h 800 1,650 2,300 2,700 3,900
Heat exchanger thermal efficiency2 % 89.3 88.3 85.1 85.5 90.8
External static pressure Pa 100
Current A 1.70 3.39 4.61 5.17 7.87
Power input kW 0.39 0.78 1.06 1.19 1.81
SFPv 5 kW/m3/s 1.47 1.5 1.49 1.41 1.5
Electrical supply Phase ph 1
Frequency Hz 50/60
Voltage V 220/240 Vac
Main unit dimensions Width mm 550 790 790 790 890
Heigth mm3 1,600 1,900 1,850 2,050
Length mm 1,580 1,650 2,1704 2,6205 2,9505
Circular duct flange Diameter mm 255 315 355 400 500
Unit sound power level dBA 57 52 55 58
Unit sound pressure level 6 dBA 50 45 48 51
Weight Unit Kg 200 250 400 500 620
1. All size available in Smart or Pro version and right or left handing | 2. Outdoor condition: -5°C, 90% Indoor condition: 25°C, 50% | 3. Including feet and duct connections | 4. Size 05 is provided in two sections
5. Size 06 and 07 are provided in three sections | 6. Simple source reference value at 1 meter, directivity factor Q=4 (quarter sphere) and non-reverberant field. Allowances on declared values: +/- 3dB
10
Air handling units
INTRODUCTION
Modular L
False ceiling heat recovery unit
Highlights
› 6 Predefined sizes
SOLUTIONS
› Plug & Play control solution
› Compact unit from 280 mm height (for air flow up to 550 m3/h)
› Wide air flow coverage from 150 to 3,400 m3/h
› Right and left configuration
› Pro (open control platform) and Smart
(Daikin control platform) version
› Excellent indoor air quality (IAQ). Up to ePM1 80% (F9)
filtration level with possibility to have a prefilter up to
ePM1 50% (F7) for the best IAQ
› VDI 6022 Certified Modular L
› BIM file available at www.daikin.eu/BIM
SOLUTIONS
Air flow range

3,000
Size 07
SOLUTIONS
2,500
Size 06
1,500
Size 05
1,200
Size 04
600
Size 03
300
Size 02
TOOLS & PLATFORMS

0 500 1,000 1,500 2,000 2,500 3,000 3,500 m3/h
From 150 up to 3,450 m /h with ESP 100 Pa
3
Nominal air flow m /h 3
Technical details

TECHNICAL DRAWINGS
clicking the QR codes. Modular L

Modular L ALB02*B ALB03*B ALB04*B ALB05*B ALB06*B ALB07*B
Airflow m3/h 300 600 1,200 1,600 2,500 3,000
Heat exchanger thermal efficiency1. % 90 91 90 91 90
External static pressure Nom. Pa 100
Current Nom. A 0.61 1.39 2.26 2.87 5.17 6.26
Power input Nom. kW 0.14 0.32 0.52 0.66 1.19 1.44
SFPv2. kW/m3/s 1.27 1.55 1.32 1.38 1.49 1.54
Electrical supply Phase ph 1
Frequency Hz 50/60
Voltage V 220/240 Vac
Main unit dimensions Width mm 920 1,100 1,600 2,000
Height mm 280 350 415 500
Length mm 1,660 1,800 2,000
Rectangular duct flange Width mm 250 400 500 700
PREVIOUS
Height mm 150 200 300 400

Weight unit kg 125 180 270 280 355 360
1. Winter design condition: Outdoor: -10°C, 90% Indoor: 22°C, 50% | 2. SFPv is a parameter that quantifies the fan efficiency (the lower it is the better will be). This reduces if airflow decreases.
3. Electrical current is based on 230V | 4. All data in the table refer to Modular L Pro. For Modular L Smart can be different. Please refer to Databook or Astra selection software for more details.
11
VAM-FC9/VAM-J8
Diamond
Energy recovery ventilation Return air
shape heat
Supply air exchanger!
Ventilation with heat recovery as standard
› Thinnest High Efficiency Enthalpy Heat Exchanger

in the market (J-series)
› Energy saving ventilation using indoor heating,
cooling and moisture recovery
› Free cooling possible when outdoor temperature
Exhaust air
is below indoor temperature (eg. during nighttime)
› Prevent energy losses from over-ventilation while improving Fresh air
indoor air quality with optional CO2 sensor (J-series)
› Possibility to change ESP via wired remote control allows
optimisation of the supply air volume (J - series)
› Can be used as stand alone or integrated in the Sky Air
or VRV system
› Wide range of units: air flow rate from 150 up to 2,000 m³/h High efficiency filters available:
› Shorter installation time thanks to easy adjustment ePM10 70% (M6), ePM1 55% (F7) and ePM1 70% (F8)
of nominal air flow rate, so less need for dampers compared
with traditional installation
› No drain piping needed
› Can operate in over- and under pressure
› Total solution for fresh air with Daikin supply
of both VAM / VKM and electrical heaters ErP
COMPLIANT
› VAM-J8 series are connectable to EKVDX DX coil for air processing
› Possibility of CO2 concentration when combining
VAM-J8 with optional BRYMA CO2 sensor and Madoka
remote controller (with or without EKVDX)

clicking the QR codes. VAM-FC9 VAM-J8
Ventilation VAM/VAM 150FC9 250FC9 350J8 500J8 650J8 800J8 1000J8 1500J8 2000J8
Power input - 50Hz Heat exchange Nom. Ultra high/High/Low kW 0.132/0.111/ 0.161/0.079/ 0.097/0.070/ 0.164/0.113/ 0.247/0.173/ 0.303/0.212/ 0.416/0.307/ 0.548/0.384/ 0.833/0.614/
mode 0.058 0.064 0.039 0.054 0.081 0.103 0.137 0.191 0.273
Bypass Nom. Ultra high/High/Low kW 0.132/0.111/ 0.161/0.079/ 0.085/0.061/ 0.148/0.100/ 0.195/0.131/ 0.289/0.194/ 0.417/0.300/ 0.525/0.350/ 0.835/0.600/
mode 0.058 0.064 0.031 0.045 0.059 0.086 0.119 0.156 0.239
Temperature Ultra high/High/Low % 77.0(1)/72.0(2)/ 74.9(1)/69.5(2)/ 85.1/86.7/ 80.0/82.5/ 84.3/86.4/ 82.5/84.2/ 79.6/81.8/ 83.2/84.8/ 79.6/81.8/
exchange 78.3(1)/72.3(2)/ 76.0(1)/70.0(2)/ 90.1 87.6 90.5 87.7 86.1 88.1 86.1
efficiency - 50Hz 82.8(1)/73.2(2) 80.1(1)/72.0(2)
Enthalpy exchange Cooling Ultra high/High/Low % 60.3(1)/61.9(1)/ 65.2/67.9/ 59.2/61.8/ 59.2/63.8/ 67.7/70.7/ 62.6/66.4/ 68.9/71.8/ 62.6/66.4/
60.3(1)/61.2(1)/
efficiency - 50Hz 67.3(1) 64.5(1)74.6 69.5 73.1 76.8 74.0 77.5 74.0
Heating Ultra high/High/Low % 66.6(1)/67.9(1)/ 75.5/77.6/ 69.0/72.2/ 73.1/76.3/ 72.8/75.3/ 68.6/71.7/ 73.8/76.1/ 68.6/71.7/
66.6(1)/67.4(1)/
72.4(1) 82.0
70.7(1) 78.7 82.7 80.2 77.9 80.8 77.9
Operation mode Heat exchange mode, bypass mode, fresh-up mode
Heat exchange system Air to air cross flow total heat (sensible + latent heat) exchange
Heat exchange element Specially processed non-flammable paper
Dimensions Unit HeightxWidthxDepth mm 285x776x525 301x1,113x886 368x1,354x920 368x1,354x1,172 731x1,354x1,172
Weight Unit kg 24.0 46.5 61.5 79.0 157
Casing Material Galvanised steel plate
Fan Air flow Heat exchange Ultra high/High/ m³/h 150/140/105 250/230/155 350 (1)/300 (1)/ 500 (1)/425 (1)/ 650 (1)/550 (1)/ 800 (1)/680 (1)/ 1,000 (1)/850 (1)/ 1,500 (1)/1,275 (1)/ 2,000 (1)/1,700 (1)/
rate - 50Hz mode Low 200 (1) 275 (1) 350 (1) 440 (1) 550 (1) 825 (1) 1,100 (1)
Bypass Ultra high/High/ m³/h 150/140/105 250/230/155 350 (1)/300 (1)/ 500 (1)/425 (1)/ 650 (1)/550 (1)/ 800 (1)/680 (1)/ 1,000 (1)/850 (1)/ 1,500 (1)/1,275 (1)/ 2,000 (1)/1,700 (1)/
mode Low 200 (1) 275 (1) 350 (1) 440 (1) 550 (1) 825 (1) 1,100 (1)
External static Ultra high/High/Low Pa 90/87/40 70/63/25 90 (1)/70.0/50.0 (1)
pressure - 50Hz
Air filter Type Multidirectional fibrous fleeces Multidirectional fibrous fleeces (G3)
Sound pressure Heat exchange Ultra high/High/Low dBA 27.0/26.0/ 28.0/26.0/ 34.5 (1)/32.0 (1)/ 37.5 (1)/35.0 (1)/ 39.0 (1)/36.0 (1)/ 39.0 (1)/36.0 (1)/ 42.0 (1)/38.5 (1)/ 42.0 (1)/39.0 (1)/ 45.0 (1)/41.5 (1)/
level - 50Hz mode 20.5 21.0 29.0 (1) 30.5 (1) 31.0 (1) 30.5 (1) 32.5 (1) 33.5 (1) 36.0 (1)
Bypass Ultra high/High/Low dBA 27.0/26.5/ 28.0/27.0/ 34.5 (1)/32.0 (1)/ 38.0 (1)/35.0 (1)/ 38.0 (1)/34.5 (1)/ 40.0 (1)/36.5 (1)/ 42.5 (1)/40.0 (1)/ 42.0 (1)/39.0 (1)/ 45.0 (1)/41.0 (1)/
mode 20.5 21.0 28.0 (1) 29.5 (1) 30.5 (1) 30.5 (1) 32.5 (1) 32.5 (1) 35.0 (1)
Operation range Around unit °CDB - 0°C~40°CDB, 80% RH or less
Connection duct diameter mm 100 150 200 250 2x250
Power supply Phase/Frequency/Voltage Hz/V 1~; 50/60; 220-240/220
Current Maximum fuse amps (MFA) A 15.0 16.0
Specific energy Cold climate kWh/(m².a) -56.0 (5) -60.5 (5) -
consumption (SEC) Average climate kWh/(m².a) -22.1 (5) -27.0 (5) -
Warm climate kWh/(m².a) -0.100 (5) -5.30 (5) -
SEC class D / See note 5 B / See note 5 -
Maximum flow rate Flow rate m³/h 130 207 -
at 100 Pa ESP Electric power input W 129 160 -
Sound power level (Lwa) dB 40 43 51 54 58 61 62 65
Annual electricity consumption kWh/a 18.9 (5) 13.6 (5) -
Annual heating Cold climate kWh/a 41.0 (5) 40.6 (5) -
saved Average climate kWh/a 80.2 (5) 79.4 (5) -
Warm climate kWh/a 18.5 (5) 18.4 (5) -
(1)Measured according to JIS B 8628 | (2)Measured at reference flow rate according to EN13141-7 | (5) At reference flow rate in accordance with commission regulation (EU) No 1254/2014
12
GSIEKA
INTRODUCTION
Electrical heater for VAM
› Total solution for fresh air with Daikin supply of both VAM
and electrical heaters
› Increased comfort in low outdoor temperature thanks
to the heated outdoor air
› Integrated electrical heater concept
(no additional accessories required)
SOLUTIONS
› Standard dual flow and temperature sensor
› Flexible setting with adjustable setpoint
› Increased safety with 2 cut-outs: manual & automatic
SOLUTIONS
SOLUTIONS
clicking the QR codes. GSIEKA
GSIEKA 10009 15018 20024 25030 35530(1)
TOOLS & PLATFORMS

Capacity kW 0.9 1.8 2.4 3.0 3.0
Duct diameter mm 100 150 200 250 355
VAM650J8,
VAM1500J8,
Connectable VAM VAM150FC9 VAM250FC9 VAM350,500J8 VAM800J8,
VAM2000J8
VAM1000J8
GSIEKA10009 GSIEKA15018 GSIEKA20024 GSIEKA25030 GSIEKA35530

Height mm 171 221 271 321 426
Dimensions Depth mm 100 150 200 250 355
Width mm 370 370 370 370 373
m/s 1.5
Minimum air velocity / airflow
m³/h 45 100 170 265 535
Power supply 1~230 VAC/50Hz
TECHNICAL DRAWINGS
Nominal current A 4.1 8.2 10.9 13.1 13.1

Heating power kW 0.9 1.8 2.4 3.0 3.0
Connection duct diameter mm 100 150 200 250 355
Min. °C -40°C
Operation range Max. °C 40°C
Rel. Humidity % 90%
Temperature sensor 10 kΩ at +25°C / TJ-K10K
Temperature sensor range - 30°C to 105°C
Temperature set point range - 10°C to 50°C
flashing every 5 seconds heater is starting up
flashing every second air flow detected, heating allowed
LED 1
OFF no power supply or no flow
LED indicators
ON problem with duct temperature sensor, set point potentiometer or PTC airflow sensor
OFF heater is not operation
PREVIOUS
LED 2
ON heater is operating
Ambient temperature adjacent to controller 0°C to +50°C
Auto high temperature cut-out 50°C
Manual reset high temperature cut-out 100°C
13
EKVDX-A
DX coil for post treatment

of fresh air
Supply air
Return air
EKVDX - DX coil for post

treatment of fresh air Exhaust air
VAM energy Fresh air

recovery unit
› Creates a high quality indoor environment by pre conditioning of incoming fresh air
› Maximum installation flexibility thanks to separate DX coil
• Different installation possibilities to suit the application
Vertical installation of VAM Upside-down installation of VAM Flexibility in positioning
VAM
EKVDX Ceiling
Maintenance cover
VAM
Switch box
VAM EKVDX
Access
hatch
EKVDX
EKVDX
VAM
› Fresh air flows from 500 up to 2,000 m³/h

› High ESP up to 150 Pa
› Can be integrated in both R-32/R-410A VRV systems
› Replaces VKM-GB range, delivering increased capacity range and reduced sound levels
14
EKVDX-A
INTRODUCTION
DX coil for air processing
Post heating or cooling of fresh air to lower the load on
the air conditioning system
ʯ Creates a high quality indoor environment by pre conditioning of
incoming fresh air
ʯ Maximum installation flexibility thanks to separate DX coil
SOLUTIONS
ʯ Wide range of units covering fresh air flows of 500 up to
2,000 m³/h EKVDX50A
ʯ High ESP up to 150 Pa
ʯ Can be integrated in both R-32/R-410A VRV systems
SOLUTIONS
SOLUTIONS
clicking the QR codes. EKVDX-A
EKVDX32A EKVDX50A EKVDX80A EKVDX100A
Power input - 50Hz Cooling Nom. kW 0.035 0.035 0.035 0.035
Heating Nom. kW 0.035 0.035 0.035 0.035
Insulation material Opcell and anti-sweat material
Dimensions Unit Height mm 250
Width mm 550 700 1,000 1,400
Depth mm 809
TOOLS & PLATFORMS

Weight Unit kg 19 23.4 30.1 37.7
Operation range Around unit °CDB 10°C~40°CDB, 80% RH or less
On coil Cooling Max. °CDB 35
temperature Heating Min. °CDB 11
Piping connections Liquid OD mm 6.35
Gas OD mm 12.7
Drain VP20 (I.D. 20/O.D. 26), drain height 625 mm
Refrigerant Type R410A/R32
GWP 2,087.5/675
Heat exchange system Direct expansion
Power supply Phase single phase
Frequency Hz 50/60
Voltage V 220-240/220
TECHNICAL DRAWINGS
EKVDX32A + EKVDX50A + EKVDX50A + EKVDX80A + EKVDX100A + EKVDX100A +

VAM500J8 VAM650J8 VAM800J8 VAM1000J8 VAM1500J8 VAM2000J8
Cooling capacity Total (VAM+DX coil) At ultra high fan speed kW 5.1 7.1 8.6 9.3 15.4 18.4
DX coil At ultra high fan speed kW 3.4 4.8 5.5 5.7 9.5 11.2
At high fan speed kW 2.7 4.1 4.4 4.5 8.8 9.2
Heating capacity Total (VAM+DX coil) At ultra high fan speed kW 6.7 8.5 11 11.9 18.7 22.9
DX coil At ultra high fan speed kW 4.2 5.1 6.9 7 10.8 13
At high fan speed kW 3.6 4.6 5.8 6.3 9.6 11.7
Fan Air flow Heat exchange Ultra high m³/h 500 650 800 1,000 1,500 2,000
rate - mode High m³/h 425 550 680 850 1,275 1,700
50Hz Bypass Ultra high m³/h 500 650 800 1,000 1,500 2,000
mode High m³/h 425 550 680 850 1,275 1,700
External static Maximum Pa 81.9 73.0 133.7 106.0 153.6 92.1
pressure - Ultra high Pa 51.9 43.0 23.7 26.0 43.6 12.1
50Hz High Pa 39.0 33.9 19.4 21.4 35.1 11.9
Sound pressure Cooling Ultra high dBA 32 34 35.5 40.5 38.5 43.5
PREVIOUS
level - 50Hz High dBA 30.5 32 34 38 37 40

Heating Ultra high dBA 32.5 34.5 36 40.5 39 44
High dBA 31.5 32 34 38.5 37 40.5
Current Maximum fuse amps (MFA) A 6 6 6 6 16 16
The heat reclaim ventilation unit and the EKVDX indoor unit MUST share the same electrical safety devices and power supply
15
VKM-GBM
Energy recovery ventilation,

humidification
and air processing
Post heating or cooling of fresh air for lower load on the
air conditioning system
› Energy saving ventilation using indoor heating,

cooling and moisture recovery
› Creates a high quality indoor environment by pre conditioning
of incoming fresh air VKM80-100GBM
› Humidification of the fresh air results in comfortable
indoor humidity level, even during heating
› Free cooling possible when outdoor temperature is below
indoor temperature (eg. during nighttime)
› Low energy consumption thanks to DC fan motor
› Prevent energy losses from over-ventilation while improving
indoor air quality with optional CO2 sensor
› Shorter installation time thanks to easy adjustment
of nominal air flow rate, so less need for dampers compared
with traditional installation
› Specially developed heat exchange element
with High Efficiency Paper (HEP)
› Can operate in over- and under pressure

clicking the QR codes. VKM-GBM
Ventilation VKM-GBM 50GBM 80GBM 100GBM
Power input - 50Hz Heat exchange mode Nom. Ultra high/ kW
0.270/0.230/0.170 0.330/0.280/0.192 0.410/0.365/0.230
High/Low
Bypass mode Nom. Ultra high/ kW
0.270/0.230/0.170 0.330/0.280/0.192 0.410/0.365/0.230
High/Low
Fresh air Cooling kW 4.71/1.91/3.5 7.46/2.96/5.6 9.12/3.52/7.0
conditioning load Heating kW 5.58/2.38/3.5 8.79/3.79/5.6 10.69/4.39/7.0
Temperature exchange Ultra high/High/Low %
76/76/77.5 78/78/79 74/74/76.5
efficiency - 50Hz
Enthalpy exchange Cooling Ultra high/High/Low % 64/64/67 66/66/68 62/62/66
efficiency - 50Hz Heating Ultra high/High/Low % 67/67/69 71/71/73 65/65/69
Operation mode Heat exchange mode / Bypass mode / Fresh-up mode
Heat exchange system Air to air cross flow total heat (sensible + latent heat) exchange
Heat exchange element Specially processed non-flammable paper
Humidifier System Natural evaporating type
Dimensions Unit HeightxWidthxDepth mm 387x1,764x832 387x1,764x1,214
Weight Unit kg 100 119 123
Fan-Air flow rate Heat exchange mode Ultra high/High/Low m³/h 500/500/440 750/750/640 950/950/820
- 50Hz Bypass mode Ultra high/High/Low m³/h 500/500/440 750/750/640 950/950/820
Fan-External static Ultra high/High/Low Pa
200/150/120 205/155/105 110/70/60
pressure - 50Hz
Air filter Type Multidirectional fibrous fleeces
Sound pressure Heat exchange mode Ultra high/High/Low dBA 38/36/34 40/37.5/35.5 40/38/35.5
level - 50Hz Bypass mode Ultra high/High/Low dBA 39/36/34.5 41/38/36 41/39/35.5
Operation range Around unit °CDB 0°C~40°CDB, 80% RH or less
Supply air °CDB -15°C~40°CDB, 80% RH or less
Return air °CDB 0°C~40°CDB, 80% RH or less
On coil temperature Cooling/Max./Heating/Min. °CDB -15/43
Refrigerant Control Electronic expansion valve
Type R-410A
GWP 2,087.5
Connection duct diameter mm 200 250
Gas OD mm 12.7
Water supply mm 6.4
Drain PT3/4 external thread
Power supply Phase/Frequency/Voltage Hz/V 1~/50/220-240
Current Maximum fuse amps (MFA) A 15
16
17
Options - Ventilation
Energy recovery ventilation - VAM
VAM 150FC9 VAM 250FC9 VAM 350J8 VAM 500J8 VAM 650J8 VAM 800J8 VAM 1000J8 VAM 1500J8 VAM 2000J8
BRC301B61
VAM wired remote control • • • • • • • • •
Individual control systems
Madoka
BRC1H52W (White) / BRC1H52S (Silver) /
BRC1H52K (Black)
User-friendly wired remote
• • • • • • • • •
controller with premium design
BRC1E53A/B/C
Wired remote control with full-text
interface and back-light
• • • • • • • • •
BRC1D52
Standard wired remote control
with weekly timer
• • • • • • • • •
DCC601A51
• • • • • • • • •
Centralised control
intelligent Tablet Controller

DCS601C51
• • • • • • • • •
systems
intelligent Touch Controller

DCS302C51
Central remote control • • • • • • • • •
DCS301B51
Unified ON/OFF control • • • • • • • • •
DCM601A51
• • • • • • • • •
System & Standard
protocol interface
intelligent Touch Manager

Management
EKMBDXB
• • • • • • • • •
Building
Modbus interface
DMS502A51
BACnet Interface • • • • • • • • •
DMS504B51
LonWorks Interface • • • • • • • • •
Coarse 55% (G4)
ePM10 75% (M5)
ePM10 70% (M6) EKAFVJ50F6 EKAFVJ50F6 EKAFVJ65F6 EKAFVJ100F6 EKAFVJ100F6 EKAFVJ100F6 x2 EKAFVJ100F6 x2
ePM1 50% (F7)

Filters
ePM1 60% (F7) EKAFVJ50F7 EKAFVJ50F7 EKAFVJ65F7 EKAFVJ100F7 EKAFVJ100F7 EKAFVJ100F7 x2 EKAFVJ100F7 x2
ePM1 70% (F8) EKAFVJ50F8 EKAFVJ50F8 EKAFVJ65F8 EKAFVJ100F8 EKAFVJ100F8 EKAFVJ100F8 x2 EKAFVJ100F8 x2
ePM1 80% (F9)
High efficiency filter
Replacement air filter

Mechanical
accessories
Rail
Rectangular to round duct transition
Separate plenum EKPLEN200 (5) EKPLEN200 (5)
CO2 sensor BRYMA65 BRYMA65 BRYMA65 BRYMA100 BRYMA100 BRYMA200 BRYMA200
Electrical heater for pre treatment of fresh air GSIEKA10009 GSIEKA15018 GSIEKA20024 GSIEKA20024 GSIEKA25030 GSIEKA25030 GSIEKA25030 GSIEKA35530 (6)
DX coil for post treatment of fresh air EKVDX32A EKVDX50A EKVDX50A EKVDX80A EKVDX100A EKVDX100A
Silencer (900mm depth)

Wiring adapter for external monitoring/ KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2) KRP2A51 (2)
control (controls 1 entire system)
Electrical accessories
Adapter PCB for humidifier
Adapter PCB for third party heater BRP4A50A BRP4A50A BRP4A50A (4) BRP4A50A (4) BRP4A50A (3/4) BRP4A50A (4) BRP4A50A (4) BRP4A50A (3/4) BRP4A50A (3/4)
External wired temperature sensor
Adapter PCB Mounting plate EKMP25VAM EKMP25VAM EKMP65VAM EKMPVAM
Installation box for adaptor PCB KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101 KRP1BB101
Notes
(1) Do not connect the system to DIII-net devices LONWorks interface, BACnet interface, …; (intelligent Touch Manager, EKMBDXA are allowed)
(2) Installation box needed
(3) Adapter PCB mounting plate needed, applicable model can be found in the table above
(4) 3rd party heater and 3rd party humidifier cannot be combined
(5) Contains 1 plenum and can be used for half side of the unit (up to 4 plenums can be used on 1 unit)
(6) Available only with optional plenum
18
INTRODUCTION
Energy recovery ventilation VKM Air handling unit applications
VKM 50GBM VKM 80GBM VKM 100GBM EKEQFCBA (1) EKEQDCB (1) EKEQMCBA (1)
• • • • • •
• • • • • •
SOLUTIONS
• • • • • •
• • • • • •
• • • • • •
• • •
• • •
• • • • • •
• • • • • •
SOLUTIONS
• • •
• • •

SOLUTIONS
KAF242H80M KAF242H100M KAF242H100M
KAF241H80M KAF241H100M KAF241H100M
TOOLS & PLATFORMS

BRYMA65 BRYMA100 BRYMA100
GSIEKA20024 (8) GSIEKA20024 (8) GSIEKA20024 (8)
BRP4A50A (4) BRP4A50A (4) BRP4A50A (4)

TECHNICAL DRAWINGS
KRCS01-1
PREVIOUS
19
Modular L Pro Modular T Pro

Accessories ALB02LB ALB03LB ALB04LB ALB05LB ALB06LB ALB07LB ATB03RA ATB04RA ATB05RA ATB06RA ATB07RA
ALB02RB ALB03RB ALB04RB ALB05RB ALB06RB ALB07RB ATB03LA ATB04LA ATB05LA ATB06LA ATB07LA
Iso Coarse 55% (G4) Filter ALF02G4A ALF03G4A ALF05G4A ALF07G4A ATF03G4A ATF04G4A ATF05G4A ATF06G4A ATF07G4A
ePM10 75% (M5) Filter ALF02M5A ALF03M5A ALF05M5A ALF07M5A ATF03M5A ATF04M5A ATF05M5A ATF06M5A ATF07M5A
ePM1 50% (F7) Filter ALF02F7A ALF03F7A ALF05F7A ALF07F7A ATF03F7A ATF04F7A ATF05F7A ATF06F7A ATF07F7A
ePM1 80% (F9) Filter ALF02F9A ALF03F9A ALF05F9A ALF07F9A ATF03F9A ATF04F9A ATF05F9A ATF06F9A ATF07F9A
Sound attenuator ALS0290A ALS0390A ALS0590A ALS0790A ATS0360A ATS0460A ATS0560A ATS0660A ATS0760A
Rails for door ALA02RLA ALA03RLA ALA05RLA ALA07RLA
Duct transition ALA02RCA ALA03RCA ALA05RCA ALA07RCA
Mixing damper ATA03MDA ATA04MDA ATA05MDA ATA06MDA ATA07MDA
External damper ATA03EDA ATA04EDA ATA05EDA ATA06EDA ATA07EDA
Electric pre heater 1 ALD02HEFA ALD03HEFA ALD05HEFA ALD07HEFA ATD03HEFAU ATD04HEFAU ATD05HEFAU ATD06HEFAU ATD07HEFAU
Electric post heater 1 ALD02HESA ALD03HESA ALD05HESA ALD07HESA ATD03HESAU ATD04HESAU ATD05HESAU ATD06HESAU ATD07HESAU
ATD03UDSAR ATD04UDSAR ATD05UDSAR ATD06UDSAR ATD07UDSAR

DX coil 2
ATD03UDSAL ATD04UDSAL ATD05UDSAL ATD06UDSAL ATD07UDSAL
ATD03UWSAR ATD04UWSAR ATD05UWSAR ATD06UWSAR ATD07UWSAR

WATER coil 2 ALD02CWSA ALD03CWSA ALD05CWSA ALD07CWSA
ATD03UWSAL ATD04UWSAL ATD05UWSAL ATD06UWSAL ATD07UWSAL
Water pre heating coil ALD02HWUA ALD03HWUA ALD05HWUA ALD07HWUA ATD03HWFAU ATD04HWFAU ATD05HWFAU ATD06HWFAU ATD07HWFAU
ATD03HWSAR ATD04HWSAR ATD05HWSAR ATD06HWSAR ATD07HWSAR

Water post heating coil 2 ALD02HWUA ALD03HWUA ALD05HWUA ALD07HWUA
ATD03HWSAL ATD04HWSAL ATD05HWSAL ATD06HWSAL ATD07HWSAL
Water valve 2 way cooling ALV02CW2A ALV03CW2A ALV05CW2A ALV07CW2A ATV03CW2A ATV04CW2A ATV05CW2A ATV06CW2A ATV07CW2A
Water valve 2 way heating ALV02HW2A ALV03HW2A ALV05HW2A ALV07HW2A ATV03HW2A ATV04HW2A ATV05HW2A ATV06HW2A ATV07HW2A
Water valve 3 way cooling ALV02CW3A ALV03CW3A ALV05CW3A ALV07CW3A ATV03CW3A ATV04CW3A ATV05CW3A ATV06CW3A ATV07CW3A
Water valve 3 way heating ALV02HW3A ALV03HW3A ALV05HW3A ALV07HW3A ATV03HW3A ATV04HW3A ATV05HW3A ATV06HW3A ATV07HW3A
Valve modulating actuator ALE00AMVA ATE00AMVA
Damper modulating actuator ATE00AMDA
Digital PCB ATE00DPUA
Frost switch ATE00FSUA
CO2 sensor ALP00COA
Humidity sensor ALP00HUA
Temperature probe ALP00TEA
Room Interface ALC00822A (POL 822)
Commissioning module ALC00895A (POL 895)
Modbus RTU module ALC00902A (POL 902)
Bacnet IP module ALC00908A (POL 908)
LonWorks Interface
Intelligent Touch Manager
Intelligent Tablet Controller
Intelligent Touch Controller
Central remote control
Unified ON/OFF control

Notes
(1) For modular T pro only, both electric heater can be used as pre and post heater
(2) For modular T pro only, sixth digit on main unit material name has to be aligned with last digit of the coil material name
ATB0*RA --> ATD00*UDSAR
ATB0*LA --> ATD00*UDSAL
ATB0*RA --> ATD00*UWSAR
ATB0*LA --> ATD00*UWSAL
ATB0*RA --> ATD00*HWSAR
ATB0*LA --> ATD00*HWSAL
(3) Please refer to the selection software for more details on accessories and their incompatibilities.
20
INTRODUCTION
Modular L Smart Modular T Smart
ALB02LBS ALB03LBS ALB04LBS ALB05LBS ALB06LBS ALB07LBS ATB03RAS ATB04RAS ATB05RAS ATB06RAS ATB07RAS
ALB02RBS ALB03RBS ALB04RBS ALB05RBS ALB06RBS ALB07RBS ATB03LAS ATB04LAS ATB05LAS ATB06LAS ATB07LAS
ALF02G4A ALF03G4A ALF05G4A ALF07G4A ATF03G4A ATF04G4A ATF05G4A ATF06G4A ATF07G4A
ALF02M5A ALF03M5A ALF05M5A ALF07M5A ATF03M5A ATF04M5A ATF05M5A ATF06M5A ATF07M5A
ALF02F7A ALF03F7A ALF05F7A ALF07F7A ATF03F7A ATF04F7A ATF05F7A ATF06F7A ATF07F7A
ALF02F9A ALF03F9A ALF05F9A ALF07F9A ATF03F9A ATF04F9A ATF05F9A ATF06F9A ATF07F9A
ALS0290A ALS0390A ALS0590A ALS0790A ATS0360A ATS0460A ATS0560A ATS0660A ATS0760A
ALA02RLA ALA03RLA ALA05RLA ALA07RLA
SOLUTIONS
ALA02RCA ALA03RCA ALA05RCA ALA07RCA
ALD02HEFB ALD03HEFB ALD05HEFB ALD07HEFB ATD03HEFBU ATD04HEFBU ATD05HEFBU ATD06HEFBU ATD07HEFBU
SOLUTIONS
SOLUTIONS
BRYMA200
BRC301B61 / BRC1H52W / BRC1H52S / BRC1H52K / BRC1E53A / BRC1E53B / BRC1E53C / BRC1D52
TOOLS & PLATFORMS

EKMBDXB
DMS502A51
DMS504B51
DCM601A51
DCC6011A51
DCC6011C51
DCS302C51
TECHNICAL DRAWINGS
DCS301B51
PREVIOUS
21
Daikin air handling units
Why choose Daikin air handling units?

› Maximum energy efficiency and indoor air quality
› Wide range of functions and options
› High quality components The unique quality of Daikin
› Innovative technology: Unique features and state of the art
technology for short payback AHU is accomplished by:
› Operation efficiency and energy savings
› Outstanding reliability and performance Panels
› Various applications are possible including › The outer panel is Pre-painted with Corrosion Class RC5
air conditioning applications, industry-type process cooling, › The inner panel is made of Aluzinc with Corrosion Class RC4
and large-scale district heat source systems
› Plug and play concept for easy installation and commissioning Gasket
› Unique Daikin fresh air package available for connection of AHU › Liquid gasket technology drastically reduces unit air leakage
to VRV or ERQ
Frame
› All anodized aluminium which has the highest corrosion
resistance compared to natural aluminium
› Unique Daikin thermal break (35 mm or 27 mm thermal
Certifications break). Polyamide bars design to enhance thermal break unit
performances
› Eurovent certified performances › Distinctive Section to section thermal break profile to ensure
› Exceeding 2018 ErP – ECODESIGN requirements thermal break design on the whole unit
› Certified according to the Hygiene Directive › Rounded profile for increased ease of cleaning
VDI 6022 (Modular L and Professional ranges)
› Certified according to the Hygiene Directive IAQ
DIN 1946 (Professional range) › Flush internal surface and rounded corner flush surface to
› RLT certified performances avoid the retention of dirt and to be easily cleanable
› Wide filtration possibility to reduce pollution
Plug & Play Controls

› Pre-commissioned and Factory-tested control for quicker on
site commissioning
› Sole manufacturer to provide a complete AHU DX solution
from a single manufacturer available for connection of AHU
to VRV or ERQ (everything factory-mounted)
22
INTRODUCTION
Marketing tools
› Watch the time-lapse video of a Daikin AHU construction on
www.youtube.com/daikineurope
› Watch the Modular L promotional video on

www.youtube.com/daikineurope
› Download our brochure on air handling units from my.daikin.eu
› Get the access to the selection tool http://tools.daikinapplied.eu
SOLUTIONS
to select your air handling units in a few clicks.
› Download the Modular L “Daikin Air Design” App on the

App stores for iOS and Android
› Consult the “Argue Card” document to support in promoting
the Modular L range (available on request – refer to your Daikin
AHU specialist)
Benefits for the installer
SOLUTIONS
Plug and play design
› Pre-programmed and factory-tested controls for an easier
and fast commissioning
BIM models › Low voltage fast connectors between AHU sections
› Flush mounted or external electrical control panel
› Get the Modular L and T BIM models
on bim.daikin.eu Daikin Fresh air package

› Get the BIM tool plugin for Revit for › Plug & Play connection of Professional or Modular AHU to
Professional and Modular R/P series Daikin VRV and ERQ
SOLUTIONS
› Factory-mounted package contains expansion valves,
electronic interface and sensors
Benefits for the consultant

Quick selection tool
› In-house developed web software with improved user
interface and preset parameters ensure that you can always
TOOLS & PLATFORMS

find the optimum and most energy efficient product for your
application
› Extremely flexible design
› Infinite variable sizes (increments of 1 cm)
BIM models
› Regardless if your AHU is standard or fully customized,
BIM models are available and can be downloaded with just
a few clicks
TECHNICAL DRAWINGS
Benefits for the end user

Customized or standard
› Amazing tailor-made capability to meet the specific customer
needs with the Professional range or fast availability thanks to
the “make to stock” standard Modular L and T range
Efficient control logic

› Open communication protocols (BACnet and Modbus) that
guarantee BMS, and iTM compatibility
› Energy efficient controls with reduced energy and
PREVIOUS
operating cost
› Highest efficiency ensure savings on energy consumption
costs
23
D-AHU MODULAR R
INSTALLATION
SMART CONTROLS DAMPER AND EC FAN
HEAT RECOVERY COMFORTABLE

WHEEL AND FILTER INDOOR CLIMATE
24
INTRODUCTION
D-AHU MODULAR R
Pre configured unit with side connection and rotary heat exchanger
(sensible or sorption)
SOLUTIONS
D-AHU MODULAR P
Pre configured unit with side connection and aluminium counter
flow plate heat exchanger
SOLUTIONS
D-AHU PROFESSIONAL

SOLUTIONS
Fully customize solution to meet all projects demand
Eurovent certification
TOOLS & PLATFORMS

Daikin Applied Europe S.p.A. participates in the Eurovent Certified Performance programme
for Air Handling Units. Check ongoing validity of certificate: www.eurovent-certification.com
AHU N°: 14.05.003
Range: D-AHU
or www.certiflash.com
Result Energy TermiC° S2&F2 Eurovent Classification according to EN1886

TECHNICAL DRAWINGS
Casing strength class D1 D2 D3

D1
Max. relative deflection mm x m -1
4.00 10.00 Exceeding10
Casing air leakage class at -400 Pa L1 L2 L3

L1
Max. leakage rate (f400) l x s x m
-1 -2
0.15 0.44 1.32
Casing air leakage lass at +700 Pa L1 L2 L3

L1
Max. leakage rate (f 700) l x s-1 x m-2 0.22 0.63 1.90
Filter bypass leakage class ePM1 80% (F9) ePM1 70% (F8) ePM1 50% (F7) ePM2,5 50% (M6) ISO Coarse
ePM1 80% (F9)
Max. filter bypass leakage rate k in % of the volume flow rate 0.50 1 2 4 6
Thermal transmittance T1 T2 T3 T4 T5
T2
PREVIOUS
(U) W x m x K
-2 -1
U <= 0.5 0.5 < U <= 1 1 < U <= 1.4 1.4 < U <= 2 No requirements
Thermal bridging factor TB1 TB2 TB3 TB4 TB5

TB2
(kb) 0.75 < Kb <= 1 0.6 < Kb <= 0.75 0.45 < Kb <= 0.6 0.3 < Kb <= 0.45 No requirements
25
Air handling units
The working principle at a glance
Typical configurations for Daikin air handling units

provide a versatile range of functions.
Our system offers numerous options for
customisation through an extensive range of
variations and added functionality.
Supply side
› › Damper section including ventilation grilles,

factory-mounted actuators
› › Premium efficiency filters with factory-

Exhaust air
mounted differencial pressure manometer
› › Heat recovery system (cross flow and

counter flow plate heat exchanger or rotary
heat exchanger)
› › Mixing box with damper and factory-

mounted actuators
› › Heating/cooling coil section with stainless

steel condensate tray and drip protection Fresh air
› › Supply air fan, EC technology (with hinged

door, opening drive monitoring, mounted
and cabled lighting and ON/OFF switch)
Fans Exchangers Humidifiers

› EC plug fan › Water coils › Evaporative humidifier without pump (loss water)
› Forward curved fan › Steam coils › Evaporative humidifier with re-circulating pump
› Backward curved fan › Direct expansion coil › Steam humidifier with direct steam production
› Backward airfoil blades fan › Superheated water coils › Steam humidifier with local distributor
› Plug fan › Electric coils › Atomized water spray humidifier
26
Air handling units
INTRODUCTION
Plug and Play control solution Unique section to section thermal break profile
› Air flow control › Thermal bridge free for the entire AHU
› Air temperature control › Smooth interior surface with improved IAQ
SOLUTIONS
› Chilled water and DX cooling system control (Indoor Air Quality)
› Free cooling
› CO2 automatic control
› Air temperature control (supply, return, Common
Conventionaldesign
design New McQuay
Daikin designdesign
ambient)
› Variable Air Volume (VAV) and Constant Air
Volume (CAV) systems
SOLUTIONS
Return side
› › Premium efficiency filters with

factory-mounted differencial
pressure manometer
Return air

› › Exhaust air fan, EC technology
(with hinged door, opening drive
SOLUTIONS
monitoring, mounted and cabled
lighting and ON/OFF switch)
› › Mixing box with damper and factory-

mounted actuators
› › Heat recovery system (cross flow and

counter flow plate heat exchanger or
rotary heat exchanger)
Supply air
TOOLS & PLATFORMS

› › Damper section including ventilation
grilles, factory-mounted actuators
TECHNICAL DRAWINGS
Heat recovery systems Other section Filters Accessories

› Heat wheel, sensible or sorption › Attenuator section › Synthetic pleated filter › Control features
› Cross flow and Counter flow plate › Mixing box section › Flat filter aluminium mesh › Frost protection
heat exchangers with actuators or manual › Rigid bag filter › Manometers
› Run-around coils controlled dampers › Soft bag filter › Drive guard
› Empty section › High efficiency filter › Roof
› Carbon absorption filter ›…
› Carbon deodorizing filter
PREVIOUS
27
Air Handling Units
Professional
Flexible solution for custom applications
Highlights
› Air flow from 750 m³/h to 144,000 m³/h, for all customer needs
› Indoor and outdoor versions
› Custom designed to facilitate the transport and the assembly
on site
› Smooth interior surface with improved IAQ (Indoor Air Quality)
› DX cooling system integration (VRV IV and ERQ coupling capability)
› Daikin Digital Control compatible
› Different heat recovery systems: heat wheel (sensible, enthalpy
or sorption), cross flow and counter flow plate heat exchangers,
run-around coils
› Wide range of fans selectable: EC, AC plug, belt driven
(forward curved, backward curved and backward airfoil blades)
› Heating/cooling coil section with stainless steel condensate tray
and drip protection
› Different humidifiers available depending on customer needs
› Premium efficiency filters with factory mounted differential
pressure manometer
› Profile in anodized aluminum with or without thermal break
› Base frame in Galvanized steel, Aluminium, Stainless Steel 430 or 316
› Panel insulation in polyurethane foam or mineral wool
› Different material options selectable for internal, external panel
skin: Pre-coated, Aluzinc, Aluminum, Stainless Steel 304 or 316
› Wide range of accessories
› Possibility to import BIM objects in Autodesk® Revit, thanks to
a dedicated free plug-in available for download
28
Air Handling Units
INTRODUCTION
Daikin Digital Control
patented
solution
Highlights
SOLUTIONS
› Plug and play control system
› Free cooling/free heating management
› VRV direct expansion systems management
› Chilled water system control
› Eco and reduced night modes
› Up to 310 I/O (inputs/outputs)
› All components internally wired
› Fast connection between sections
› Programming schedule
› Indoor Air Quality (IAQ) controlled by CO2 Probe
SOLUTIONS
› Regulation logic: Temperature Supply, Return, Ambient
› Preloaded control parameters simplify the field commissioning
› Unit delivered tested and programmed in the factory ensuring
high quality level
› Time and cost savings thanks to easy assembly on site
› Minimum maintenance required
› No involvement of external company or need of a third-party
warranty thanks to integration of low and high voltage
› User friendly control interface

› Supervision and Control management local, remote options
(Modbus, Bacnet)
SOLUTIONS
› Maximum flexibility in selecting the product and control feature
directly from selection software
Daikin On Site
TOOLS & PLATFORMS

The Daikin On Site platform offers different
features and functions to monitor and
control the unit.
The monitoring system makes available
dashboards,remote access, scheduling,
online graphics, diagnostics, software
upgrade.
TECHNICAL DRAWINGS
PREVIOUS
29
Air Handling Units
Modular P
Side connected plate heat recovery air handling unit
Highlights
› 10 predefined sizes
› Airflow from 700 m³/h to 21,000 m3/h (ErP 2018)
› Counterflow plate heat recovery
› Compact design (only 720 mm depth)
› Thermal bridge free for the entire AHU
› Indoor air quality compliant with VDI 6022 hygiene guideline
› Advanced control features
› Monitoring and control through Daikin iTM
› Nominal air flow programmed at factory
› Air flow or pressure control (Variable Air Volume - Constant Air Volume)
› Free cooling capability
› Economy and Night mode operation Modular P
› Possibility to import BIM objects in Autodesk® Revit, thanks to a
dedicated free plug-in available for download
Air flow range
12,500
Size 10
10,400
Size 09
8,000
Size 08
5,500
Size 07
4,750
Size 06
3,700
Size 05
3,100
Size 04
2,400
Size 03
1,600
Size 02
1,100
Size 01
0 5,000 10,000 15,000 20,000 m3/h

3
Technical details
clicking the QR codes. Modular P
Modular P 1 2 3 4 5 6 7 8 9 10
Airflow m3/h 1,100 1,600 2,400 3,100 3,700 4,750 5,500 8,000 10,400 12,500
Heat exchanger
% 88.1 87 87.2 87.1 92.1 91.8 92.9
thermal efficiency1
External static
Nom. Pa 200
pressure
Current 2 Nom. A 1.78 2.48 2.08 2.73 3.45 4.58 5.25 7.53 9.55 11.55
Power input 2 Nom. kW 0.41 0.57 0.83 1.09 1.38 1.83 2.10 3.01 3.82 4.62
SFPv3 kW/m3/s 1.183 1.092 1.090 1.113 1.118 1.210 1.207 1.216 1.148 1.166
Electrical supply Phase ph 1 3
Frequency Hz 50
Voltage V 230 400
Dimensions unit Width mm 720 820 990 1,200 1,400 1,600 1,940 2,300
Height mm 1,320 1,540 1,740 1,920 2,180 2,460 2,570
Length mm 2,030 2,200 2,610 2,660 2,800 3,210 3,340 3,840 4,060 4,190
Weight unit kg 343 358 512 604 785 852 964 1,449 1,700 2,071
1. Winter design condition: Outdoor: -10°C, 90% Indoor: 22°C, 50% | 2. Measured with dirty filters | 3. SFPv is a parameter that quantifies the fan efficiency (the lower it is, the better will be).
This reduces if airflow decreases.
30
Air Handling Units
INTRODUCTION
Modular R
Side connected rotary heat recovery air handling unit
Highlights
› 10 predefined sizes
SOLUTIONS
› Airflow from 700 m³/h to 18,000 m3/h (ErP 2018)
› Rotary heat recovery (Sensible or Sorption)
› Compact design (only 720 mm depth)
› Thermal bridge free for the entire AHU
› Indoor air quality compliant with VDI 6022 hygiene guideline
› Advanced control features
› Monitoring and control through Daikin iTM
SOLUTIONS
› Nominal air flow programmed at factory
› Air flow or pressure control (Variable Air Volume - Constant Air Volume)
› Free cooling capability
› Economy and Night mode operation Modular R
› Possibility to import BIM objects in Autodesk® Revit, thanks to a
dedicated free plug-in available for download
Air flow range

15,000
Size 10
SOLUTIONS
11,500
Size 09
9,100
Size 08
7,000
Size 07
6,100
Size 06
5,500
Size 05
4,100
Size 04
2,700
Size 03
TOOLS & PLATFORMS

1,700
Size 02
1,200
Size 01
0 5,000 10,000 15,000 20,000 m3/h

3
Technical details
TECHNICAL DRAWINGS

clicking the QR codes. Modular R
Modular R 1 2 3 4 5 6 7 8 9 10
Airflow m3/h 1,200 1,700 2,700 4,100 5,500 6,100 7,000 9,100 11,500 15,000
Temp. efficiency winter % 76.9 76.7 77 77.2 78.5 77 78.4 78.7 77.9 78.2
External static
Nom. Pa 200
pressure
Current1 Nom. A 2.6 3.65 2.24 3.27 4.23 5.14 5.79 6.92 9.39 12.56
Power input1 Nom. kW 0.6 0.84 1.36 1.98 2.56 3.11 3.51 4.19 5.69 7.61
SFPv2 kW/m3/s 1.553 1.507 1.451 1.521 1.387 1.549 1.525 1.432 1.487 1.551
Electrical supply Phase ph 1 3
Frequency Hz 50
Voltage V 230 400
PREVIOUS
Dimensions unit Width mm 720 820 990 1,200 1,400 1,600 1,940 2,300
Height mm 1,320 1,540 1,740 1,920 2,180 2,460 2,570
Length mm 1,700 1,800 1,920 2,080 2,280 2,400 2,450 2,280 2,400
Weight unit kg 325 350 475 575 750 790 950 1,330 1,410 1,750
1. Measured with dirty filters | 2. SFPv is a parameter that quantifies the fan efficiency (the lower it is the better will be). This reduces if airflow decreases.
31
Daikin’s
air handling units solutions
You will find your match
Why choose Daikin air handling units with a DX connection?
Simplifying business Complete range of possibilities
The unique total solution approach by Daikin Thanks to the most complete offer in the market,
helps businesses to propose better cross-pillar Daikin has the solution for all types of commercial
solutions, to increase their success ratio by providing applications requiring fresh air. Daikin provides
unmatchable product combinations to the end-user ventilation solutions based on AHU from 2,500 m3/h
and to simplify the life of installers by supplying up to 140,000 m3/h either with natural heat recovery
high-quality products coming from the same or more advanced ventilation solutions where
manufacturer. Contrary to other manufacturers, a VRV outdoor unit can be connected to the Daikin
Daikin does not use OEM products in its AHU with DX AHU for ultimate climate control. The harmonized
offer. Many competitors are either offering OEM DX control, between the VRV outdoor unit and the AHU,
outdoor units or OEM AHU which create additional offer outstanding reliable operation of the system
problems when warranties or faults arise. Having a when connected to an iTM.
single interface for your business makes Daikin
the right choice.
One-stop shop
Daikin is the only global manufacturer in the market

capable of offering a true Plug & Play solution
where Daikin AHUs manufactured by Daikin Applied
Europe and certified by Eurovent, offer off-the-shelf Advantages
compatibility with Daikin’s unique VRV outdoor unit › Unique manufacturer offering
range for the best performance in the market. a complete range
This unique integration of cross-pillar products › Plug & Play solution
under the same umbrella, gives the customer › Direct iTM compatibility
both peace-of-mind and added value when
promoting a total solution approach.
32
Air handling units connectable to VRV/ERQ
INTRODUCTION
Why use VRV and ERQ condensing units for connection
to air handling units?
High Efficiency
SOLUTIONS
Daikin heat pumps are renowned for their high
energy efficiency. Integrating the AHU with a high
efficiency heat pump system lower the carbon
footprint of the building.
Outside air = 30°C
Fresh air AHU connected to VRV
outdoor unit: The AHU takes care of
the heat loads of fresh air securing air
supply at 21°C.
SOLUTIONS
VRV heat pump

connected to the VRV system with indoor units only to take
indoor units care of comfort cooling (or heating) and
SOLUTIONS
the indoor heat loads (lighting, people,
machines, sun radiation, etc)
Fast response to changing loads

resulting in high comfort levels Easy Design and Installation
Daikin ERQ and VRV units respond rapidly The system is easy to design and install since
to fluctuations in supply air temperature, resulting no additional water systems such as boilers,
in a steady indoor temperature and resultant high tanks and gas connections etc. are required.
comfort levels for the end user. The ultimate is This also reduces both the total system investment
TOOLS & PLATFORMS

the VRV range which improves comfort even more and running cost.
by offering continuous heating, also during defrost.
Daikin Fresh air package
› Plug & Play connection between VRV/ERQ and the entire D-AHU modular range.
› Factory fitted and welded DX coil control and expansion valve kits.
VRV IV or ERQ
TECHNICAL DRAWINGS
condensing unit
Factory fitted and welded

fresh air package
Electronic expansion
valve (EKEXV) Control box
PREVIOUS
(EKEQ)
33
Air handling units connectable to VRV/ERQ - Controls
In order to maximise installation flexibility,

4 types of control systems are offered
W control: Off the shelf control of air temperature (discharge Z control: Control of air temperature (suction temperature, room
temperature, suction temperature, room temperature) via any temperature) via Daikin control (no DDC controller needed)
DDC controller, easy to setup Y control: Control of refrigerant (Te/Tc) temperature via Daikin
X control: Precise control of air temperature (discharge temperature, control (no DDC controller needed)
suction temperature, room temperature) requiring
a preprogrammed DDC controller (for special applications)
1. W control (Td/Ts/Troom control): 2. X control (Td/Ts/Troom control):
Air temperature control via DDC controller Precise air temperature control via DDC controller
Room temperature is controlled as a function of the air handling Room temperature is controlled as a function of the air handling
unit suction or discharge air (customer selection). The DDC unit suction or discharge air (customer selection). The DDC
controller is translating the temperature difference between set controller is translating the temperature difference between set
point and air suction temperature (or air discharge temperature point and air suction temperature (or air discharge temperature
or room temperature) into a proportional 0-10V signal which is or room temperature) into a reference voltage (0-10V) which is
transferred to the Daikin control box (EKEQFCBA). This voltage transferred to the Daikin control box (EKEQFCBA). This reference
modulates the capacity requirements of the outdoor unit. voltage will be used as the main input value for the compressor
frequency control.
OR
OR OR
OR
AHU
AHU AHU
AHU
TText
ext TTss TText
ext TTss
0-10V Control
Daikin boxbox:
control 0-10V Control
Daikin boxbox:
control
DDC
DDC + DDC
DDC +
EKEQFCBA
EKEQFCBA Te Tc EKEQFCBA
EKEQFCBA
TToaoa TTdd TToaoa Te Tc TTdd
- -
TTroom
room
TTroom
room
4. Z control Ts / Troom control):

3. Y control (Te/Tc control):
Control your AHU just like a VRV indoor unit
By fixed evaporating/condensing temperature (100% recirculation air application)
A fixed target evaporating or condensing temperature can be set Allows the possibility to control the AHU just like a VRV indoor
by the customer. In this case, room temperature is only indirectly unit. Meaning temperature control will be focused on return air
controlled. A Daikin wired remote control (BRC1* - optional) have temperature from the room into the AHU. Requires BRC1* for
to be connected for initial set-up but not required for operation. operation. The only control that allows the combination of other
indoor units to the AHU at the same time.
AHU
AHU
AHU
TText
ext TTss
BRC1D*
BRC1D* Control box
BRC1E* Text TTss
BRC1E* EKEQFCBA + BRC1D* Control box
Control box
ext
BRC1H* TToaoa Te Tc TTdd BRC1D*

BRC1E* EKEQMCBA (VRVIV)
EKEQMCBA (VRV IV) +
- BRC1E*
BRC1H* Te Tc
EKEQDCB (ERQ)
EKEQDCB (ERQ) TToaoa Tdd
-
TTroom
room
OR
OR
TTroom
room
Td = Discharge (supply) air temperature Ts = Suction (return) air temperature Toa = Outdoor air temperature Troom = Room air temperature
Text = Extraction air temperature Te = Evaporating temperature Tc = Condensing temperature
Option kit Features

Possibility W Off-the-shelf DDC controller that requires no pre-configuration
Possibility X EKEQFCBA Pre-configured DDC controller required
Possibility Y Using fixed evaporating temperature, no set point can be set using remote control
EKEQDCB Using Daikin infrared remote control BRC1*
Possibility Z
EKFQMCBA* Temperature control using air suction temperature or room temperature (via remote sensor)
* EKEQMCB (for ’multi’ application)
34
Modular R AHU
with VRV indoor units and
VRV IV+ in mix application
35
Connectivity of air handling units to VRV/ERQ
- for larger capacities (from 8 to 54HP)
An advanced solution for both pair and multi application
› Inverter controlled units › Large range of expansion valve kits available

› Heat pump › BRC1H* is used to set the set point temperature
› Heat recovery only for mix application with indoor (connected to the EKEQMCBA).
units without hydrobox. For 100% recirculation › Connectable to all VRV heat recovery and heat pump systems (VRV
AHUs only used as a VRV indoor unit. H/R and VRV-i only connectable with Z control)
› R-410A
› Control of room temperature via Daikin control
Pair application Multi application
One ERQ or VRV IV heat pump (system) connected One VRV IV heat pump connected to several AHUs
to one AHU through one refrigerant circuit › with Z control and field supplied controls on AHU side.
› with W, X, Y and Z control › not allowed for VRV H/R
› not allowed for VRV H/R › no interlaced coil possible
One VRV IV heat pump (system) connected to the interlaced

coil of one AHU through several refrigerant circuits
› with W, X and Y control
› not allowed for VRV H/R and VRV-i
Mix application
VRV indoor units and AHU(s) mixed in the same

VRV IV heat pump or heat recovery system
› with Z control and field supplied controls on AHU side
› no interlaced coil possible
› hydrobox not possible
Several ERQ or VRV IV heat pumps connected to the interlaced

coil of one AHU through several refrigerant circuits
› with W, X and Y control
› not allowed for VRV H/R and VRV-i
Refrigerant piping
F1-F2
P1-P2
For more information on the limitations applying on all the above application types, please refer to the relevant databooks of EKEXV and EKEQ with guidelines and other information on the selection process.
36
ERQ condensing units
INTRODUCTION
ERQ - for smaller capacities
(from 100 to 250 class)
A basic fresh air solution for pair application
› Inverter controlled units
› Heat pump
SOLUTIONS
› R-410A
› Wide range of expansion valve kits available
› Perfect for the Daikin Modular air handling unit
The “Daikin Fresh Air Package” provides a complete Plug & Play Solution including
AHU, ERQ or VRV Condensing Unit and all unit control (EKEQ, EKEX, DDC controller)
factory mounted and configured. The easiest solution with only one point of contact.
More details and final information can be found
by scanning or clicking the QR codes. ERQ-AW1
SOLUTIONS
ERQ-AV1 ERQ-AW1
Ventilation ERQ 100AV1 125AV1 140AV1
Capacity range HP 4 5 6
Cooling capacity Nom. kW 11.2 14.0 15.5
Heating capacity Nom. kW 12.5 16.0 18.0
Power input Cooling Nom. kW 2.81 3.51 4.53
Heating Nom. kW 2.74 3.86 4.57
EER 3.99 3.42

COP 4.56 4.15 3.94
Dimensions Unit HeightxWidthxDepth mm 1,345x900x320
Weight Unit kg 120
SOLUTIONS
Casing Material Painted galvanized steel plate
Fan-Air flow rate Cooling Nom. m³/min 106
Heating Nom. m³/min 102 105
Sound power level Cooling Nom. dBA 66 67 69
Sound pressure Cooling Nom. dBA 50 51 53
level Heating Nom. dBA 52 53 55
Operation range Cooling Min./Max. °CDB -5/46
Heating Min./Max. °CWB -20/15.5
On coil temperature Heating/Min./Cooling/Max. °CDB 10/35
Refrigerant Type R-410A
Charge kg 4.0
TCO₂eq 8.4
TOOLS & PLATFORMS

GWP 2,087.5
Control Expansion valve (electronic type)
Gas OD mm 15.9 19.1
Drain OD mm 26x3
Power supply Phase/Frequency/Voltage Hz/V 1N~/50/220-240
Current Maximum fuse amps (MFA) A 32.0
Ventilation ERQ 125AW1 200AW1 250AW1
Capacity range HP 5 8 10
Cooling capacity Nom. kW 14.0 22.4 28.0
Heating capacity Nom. kW 16.0 25.0 31.5
Power input Cooling Nom. kW 3.52 5.22 7.42
Heating Nom. kW 4.00 5.56 7.70
TECHNICAL DRAWINGS
EER 3.98 4.29 3.77

COP 4.00 4.50 4.09
Dimensions Unit HeightxWidthxDepth mm 1,680x635x765 1,680x930x765
Weight Unit kg 159 187 240
Casing Material Painted galvanized steel plate
Fan-Air flow rate Cooling Nom. m³/min 95 171 185
Heating Nom. m³/min 95 171 185
Sound power level Nom. dBA 72 78
Sound pressure level Nom. dBA 54 57 58
Operation range Cooling Min./Max. °CDB -5/43
Heating Min./Max. °CWB -20/15
On coil temperature Heating/Min./Cooling/Max. °CDB 10/35
Refrigerant Type R-410A
Charge kg 6.2 7.7 8.4
TCO₂eq 12.9 16.1 17.5
GWP 2,087.5
PREVIOUS
Control Electronic expansion valve

Gas OD mm 15.9 19.1 22.2
Power supply Phase/Frequency/Voltage Hz/V 3N~/50/400
Current Maximum fuse amps (MFA) A 16 25
37
Integration with third party air handling units
Integration of ERQ and VRV in third party air handling units

a wide range of expansion valve kits and control boxes
Combination table
Control box Expansion valve kit
EKEQDCB EKEQFCBA EKEQMCBA EKEXV50 EKEXV63 EKEXV80 EKEXV100 EKEXV125 EKEXV140 EKEXV200 EKEXV250 EKEXV400 EKEXV500 Mixed connection
with VRV indoor units
Z control W,X,Y control Z control - - - - - - - - - -
ERQ100 P (1) P - - P P P P - - - - -
1-phase ERQ125 P (1) P - - P P P P P - - - -
ERQ140 P (1) P - - - P P P P - - - -
Not possible
ERQ125 P (1) P - - P P P P P - - - -
3-phase ERQ200 P (1) P - - - - P P P P P - -
ERQ250 P (1) P - - - - - P P P P - -
VRV IV H/P
(RYYQ, RXYQ, RXYSQ, - P Possible (not
RXYTQ, RXYLQ, RWEYQ) P (1) / n2 (1) mandatory)
VRV IV i-series - -
Mandatory (no
VRV IV H/R - - n1
hydrobox)
• P (pair application) - One or more outdoor units connected to an (interlaced) coil of one AHU. To determine exact configuration please refer to the engineering data book.
• n1 (only mix application) - Combination of (multiple) AHU(s) and VRV DX indoor(s) is mandatory. To determine the exact configuration please refer to the engineering data book.
• n2 (mix or multi application) - Combination of (multiple) AHU(s) with (mix application) or without (multi application) VRV DX indoor(s). To determine the exact configuration please refer to the engineering data book.
• Control box EKEQFA can be connected to some types of VRV IV outdoor units (with a maximum of 3 boxes per unit). Do not combine EKEQFA control boxes with VRV DX indoor units, RA indoor units or hydroboxes
(1) No interlaced coil possible with Z control
Capacity table
Cooling Heating
Allowed heat exchanger Allowed heat exchanger Allowed heat exchanger Allowed heat exchanger
EKEXV Class capacity (kW) volume (dm3) EKEXV Class capacity (kW) volume (dm3)
Minimum Standard Maximum Minimum Maximum Minimum Standard Maximum Minimum Maximum
50 5.0 5.6 6.2 1.33 1.65 50 5.6 6.3 7.0 1.33 1.65
63 6.3 7.1 7.8 1.66 2.08 63 7.1 8.0 8.8 1.66 2.08
80 7.9 9.0 9.9 2.09 2.64 80 8.9 10.0 11.1 2.09 2.64
100 10.0 11.2 12.3 2.65 3.30 100 11.2 12.5 13.8 2.65 3.30
125 12.4 14.0 15.4 3.31 4.12 125 13.9 16.0 17.3 3.31 4.12
140 15.5 16.0 17.6 4.13 4.62 140 17.4 18.0 19.8 4.13 4.62
200 17.7 22.4 24.6 4.63 6.60 200 19.9 25.0 27.7 4.63 6.60
250 24.7 28.0 30.8 6.61 8.25 250 27.8 31.5 34.7 6.61 8.25
400 35.4 45.0 49.5 9.26 13.2 400 39.8 50.0 55.0 9.26 13.2
500 49.6 56.0 61.6 13.2 16.5 500 55.1 63.0 69.3 13.2 16.5
Saturated evaporating temperature: 6°C Saturated condensing temperature: 46°C
Air temperature: 27°C DB / 19°C WB Air temperature: 20°C DB
EKEXV - Expansion valve kit for air handling applications

Ventilation EKEXV 50 63 80 100 125 140 200 250 400 500
Dimensions Unit mm 401x215x78
Weight Unit kg 2.9
Sound pressure level Nom. dBA 45
Operation range On coil Heating Min. °CDB 10 (1)
temperature Cooling Max. °CDB 35 (2)
Refrigerant Type / GWP R-410A / 2,087.5
Piping connections Liquid OD mm 6.35 9.52 12.7 15.9
(1) The temperature of the air entering the coil in heating mode can be reduced to -5°CDB. Contact your local dealer for more information. (2) 45% Relative humidity.
EKEQ - Control box for air handling applications

Ventilation EKEQ FCBA DCB MCBA
Application Pair Pair Pair/Multi/Mix
Outdoor unit ERQ / VRV ERQ VRV
Dimensions Unit mm 132x400x200
Weight Unit kg 3.9 3.6
Power supply Phase/Frequency/Voltage Hz/V 1~/50/230
The combination of EKEQFCBA and ERQ is in pair application. The EKEQFCBA can be connected to some type of VRV IV outdoor units with a maximum of 3 control boxes. The combination with DX indoor units,
hydroboxes, RA outdoor units, ... is not allowed. Refer to the combination table drawing of the outdoor unit for details.
For more information refer to the EKEXV or EKEQ databooks
38
INTRODUCTION
New generation of
expansion valve kits
and control boxes
SOLUTIONS
SOLUTIONS
Available from
Autumn
2023

Integrating third party Air Handling
SOLUTIONS
Units in the VRV 5 total solution
(EKEXVA* / EKEA*)
TOOLS & PLATFORMS
Refrigerant piping
TECHNICAL DRAWINGS
F1-F2
P1-P2
› Unified EXV range connectable to both VRV 5 R-32 and VRV IV / ERQ R-410A units
› 3 new EXV capacities: 300, 350 and 450, allowing maximum flexibility
› Unified control box, offering all existing W,X,Y,Z controls + new advanced Z control
› Complete peace of mind as Daikin provides all required tools to ensure compliance
to the IEC product standard
› Extension of operation range of EKEA: Outside installation possible down to -25°C
PREVIOUS
› Lower connection ratio limit for pair application
39
Air handling unit applications
EKEQFCBA (1) EKEQDCB (1) EKEQMCBA (1)
Madoka
BRC1H52W (White) / BRC1H52S (Silver) /
BRC1H52K (Black) • • •
Individual control systems
User-friendly wired remote

controller with premium design
BRC1E53A/B/C
Wired remote control with full-text
interface and back-light
• • •
BRC1D52
Standard wired remote control
with weekly timer
• • •
Centralised control
DCC601A51
intelligent Tablet Controller • • •
systems
DCS601C51
intelligent Touch Controller • • •
Building Management
System & Standard
protocol interface
DCM601A51
intelligent Touch Manager • • •
EKMBDXB
Modbus interface • • •
accessories
Electrical
External wired temperature sensor KRCS01-1
Notes
(1) Do not connect the system to DIII-net devices LONWorks interface, BACnet interface, …; (intelligent Touch Manager, EKMBDXA are allowed)
(2) Installation box needed
(3) Adapter PCB mounting plate needed, applicable model can be found in the table above
(4) 3rd party heater and 3rd party humidifier cannot be combined
(5) Contains 1 plenum and can be used for half side of the unit (up to 4 plenums can be used on 1 unit)
(6) Available only with optional plenum
40
41
We’re here to help you! Online and offline
Online and offline VRV selection software
Business portal via mobile or desktop

my.daikin.eu
Full BIM object library available
bim.daikin.eu
42
platforms
Tools and Literature overview
Supporting tools, software and app

46
44
43
Literature
overview
for professional network
Solutions
catalogues:
Reference Reference
books: catalogue
Reference Daikin commercial
and industrial
catalogue
references
Commercial & Industrial applications
213
Product VRV IV S-series VRV IV i-series Water-to-air heat VRV5 S-Series

i
Keep looking
Keep looking you’ll never find me
profiles: you’ll never find me Main benefits, Main benefits, pump VRV 5
application application Water-to-air
heat pump
Detailed info on VRV 5 S-series
Join us to create
Main benefits and
examples and examples and specs of VRV 5
VRV IV heat pumps for indoor installation
VRV IV W-series,
using water as a heat source a sustainable future
Compact VRV IV heat pumps
for residential and light commercial applications
specs of VRV IV specs of VRV IV application examples,

S-series product i-series product technical system
range range design background Lower CO2 equivalent
and market-leading efficiencies
Scale up your expectations CO ErP 2021

COMPLIANT
Lower CO2 Industry-leading Offering like-for-like Variable Refrigerant

equivalents real life efficiencies R-410A flexibility Temperature
208 207 209 210
Focus Replacement Infrastructure F-gas regulation L∞P by Daikin

topics: Technology cooling New F-gas
Details on the F-gas Detailed info on L∞P
Replacement Clear installer Clear installer Regulation regulation and how Certified Reclaimed
Refrigerant Allocation
by Daikin where
technology
Ready for the 2030 A/C market
for installers benefits of VRV benefits why to Daikin is prepared reclaimed refrigerant
replacement choose Daikin for the future is reused
HVAC-R market
No HFC ban but a phase down, why?
technology for infrastructure To reduce the environmental impact of refrigerants, the EU wants to reduce the consumption and
consequently reduce the use in air conditioners and other applications.
However, HFCs remain necessary in many applications because of their energy eﬃciency, safety
and economic beneﬁts. There is no ban nor a phase out of HFCs, but a gradual phase down to
a level that remains necessary for a sustainable growth of the air conditioning, heat pump and
refrigeration industry.
cooling There are 3 main areas with specific actions to achieve the phase down:
100
90
EU phase down targets towards 
1. Minimising the impact of new equipment, by reducing the use of
high GWP F-gases
› Changing to lower GWP HFCs and non-HFC gases for specific sectors
Make a positive choice and reuse refrigerant
to avoid more than 150,000 kg of virgin gas IF I
ED RE
CL
% of baseline consumption allowed
80
(e.g. use of R-32 for residential sector, etc.)
RT
70
AI
› Reducing refrigerant charges

being produced each year
CE
60
ME
50 2. Reducing the use of refrigerants for servicing HVAC-R equipment

40
› Reducing leakages
D
30
20 › Servicing ban on HFC with GWP > 2,500 for refrigeration equipment above
N
10 40 TCO2eq charge, (e.g. R-404A)

T IO
0
3. Increasing recovery and reuse of HFCs
REF
2016 2018 2020 2022 2024 2026 2028 2030
(only new HFC gases are part of the HFC phase down scheme)
CA
Baseline = the average HFC consumption between 2009 and 2012

RI
GE
LO
605
AL RA
NT
214 140 223

The quick and quality way of upgrading R-22 and R-407C systems
ECPEN17-605_F-gas Regulation_07.indd 1 28/06/17 14:28
Product Mini Sky Air Low height Sky Low height large Sky
flyers: Mini Sky Air
Alpha-series Low height Sky Air
Air Alpha-series Low height large Sky Air
Air Advance-series
RZAG-A mini Sky RZAG-N* Sky Air RZA-D Sky Air Advance-
Alpha-series Alpha-series Advance-series
RZAG-A RZAG-NV1/NY1 RZA-D / FDA-A
Air Alpha-series Alpha-series series

Main benefits and Main benefits and Main benefits and
specs of RZAG-A specs of the low specs of the low height
series height RZAG-N* RZA-D* series
Infrastructure Extension of the Sky Air Alpha-series range for light Industry leading technology in the most compact casing ever
cooling
commercial applications and technical cooling Variable Refrigerant
Large Sky Air system for commercial
› Capacities from 3,5 to 6kW › Guarantees operation in both heating and
Temperature
› Unique, low-height single fan portfolio › Reliable in operation thanks to
applications in the most compact casing ever
› Best in class performance: refrigerant cooled PCB
Inverter › Top efficient outdoor units up to A++ cooling mode down to -20°C SEER up to 8.02 (A++) › Very long piping lengths up to 85m
Replacement › Unique, low-height single fan portfolio › Reliable in operation thanks to
› Lower environmental impact thanks to R-32 › Reliable in operation thanks to refrigerant technology Replacement
› Lower environmental impact thanks › Market-leading serviceability and handling › 20 and 25 kW capacity refrigerant cooled PCB
refrigerant cooled PCB technology
› Suits infrastructure cooling applications › Maximum piping length up to 50m and 30m in to R-32 refrigerant • Easy access to all components › High efficiency: SEER up to 6.25 › Very long piping lengths up to 100 m
› Replacement technology height difference Infrastructure › Suits infrastructure cooling applications • 7-segment display › Lower environmental impact thanks › Market-leading serviceability and handling
cooling Pair, twin, triple,
› Exclusively offered for pair applications › Connectable to all common Sky Air models › Guaranteed operation in both cooling double twin application to R-32 refrigerant • Easy access to all components
and Perfera (FTXM) wall mounted unit and heating down to -20°C › Guaranteed operation in both cooling • 7-segment display
Pair, twin, triple,
and heating down to -20 °C
146
double twin application
147 148
RZAG-A More details and final information can be found on my.daikin.eu
Madoka Split, Sky Air, VRV, Chillers,

Refrigeration, Daikin Altherma
RTD
Detailed info modbus
on BRC1H* Modbus
Interface
interface
remote RTD
Detailed info
control on RTD
controls and
applications
Integration of Daikin portfolio in BMS system via Modbus
› Indoor unit control › Retail applications

via 0~10 volt, dry contact › Hotel applications
or resistance contact › IT applications
306
› Heating interlock
› Alarm signal
308
Product Sky Air VRV Catalogue Ventilation

catalogues: Catalogue Detailed
Ventilation
Catalogue
Sky Air
Detailed
Auto cleaning filter
for concealed ceiling units
Modular L
Premium efficiency heat recovery unit
VRV
technical Product catalogue 2020
for professionals Detailed info on
for professionals technical
A unique
success story repeated
UNIQUE
Patents
pending
Flexibility
to meet your needs
for professionals
information Ventilation
& benefits of
Reduced runningcosts 6 Predefined sizes
information products
Improved room air quality Compliant with VDI 6022
Minimal time required for filter cleaning Exceeding ERP 2018 requirement
Plug & Play Controls
Unique technology
VRV Product catalogue 2018 for professionals
& benefits the VRV total

Exhaust Air
airflow Fresh Air
direction
on Sky Air solution

Supply Air
Return Air
ALB
Including
NEW
Sky Air Alpha-series
and Round Flow
cassette
Daikin Europe N.V. Naamloze Vennootschap Zandvoordestraat 300 · 8400 Oostende · Belgium · www.daikin.eu · BE 0412 120 336 · RPR Oostende (Responsible Editor)
ErP
Daikin Europe N.V. participates in the Eurovent Certified
WINNER
THE BEST
Performance programme for Liquid Chilling Packages and
Hydronic Heat Pumps, Fan Coil Units and Variable Refrigerant OUR BIM
Flow systems. Check ongoing validity of certificate: ER VISIT ION Fresh air for the residential and commercial sector
PARTN
www.eurovent-certification.com
Minimum running costs, FOR GREEN
APPLICAT
ON
2018 winner
ECPEN18 - 200 04/18
The present publication is drawn up by way of information only and does not constitute an offer binding upon
maximum flexibility. compl
iant ING
BUILD RT
SUITE
IKIN.EU/B
IM Heat recovery ventilation and air handling applications
2021
Daikin Europe N.V. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge. No
WWW.DA
Fast installation, top reliability, SUPPO
express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its
content and the products and services presented therein. Specifications are subject to change without prior notice.
100 200 203

Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from
or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V.
The present publication supersedes ECPEN17-200. Printed on non-chlorinated paper.

perfect comfort. 1
44
INTRODUCTION
for your customers
SOLUTIONS
Solutions Commercial Green Buiding Maximise your Hotel Solutions
catalogues: Solutions Solutions BREEAM score Clear building
Daikin offers Green building Clear building owner/ Maximise your BREEAM categories Hotel solutions owner/investor
solutions BREEAM score
solutions for investor benefits why to with Daikin Solutions
Overview of how for hotel owners
benefits why to
commercial choose Daikin for a green to score BREEAM choose Daikin for
applications building, with emphasis points with Daikin
Heating - air conditioning - hot water - ventilation - refrigeration - control
a hotel
100 on BREEAM
Sustainable design
International New Construction 2016
218
with Daikin HVAC-R systems
216 221
Reference
SOLUTIONS
books: Success Case study
Vandervalk hotel case
Success case study In depth info on the
VRV total solution at a
Hotel Van der Valk, Mons
Vandervalk hotel
›A Daikin total solution
219
Product Intelligent Touch Intelligent Daikin Cloud Serivce

Tablet
profiles: Manager Tablet Details on the Daikin

Control systems Detailed benefits of intelligent Controller Daikin Cloud connection
Intelligent Touch Tablet Controller Cloud Service
Intelligent Touch Detailed benefits

Remote monitoring and control
Manager for commercial DX systems
SOLUTIONS
Manager of Intelligent Tablet
Controller
An intelligent approach
to air conditioning management
Mini Building Management System Advanced centralised controller with cloud connection
ECPEN19-542_V04.indd 1 18/09/2018 10:39
302 303 542
Focus SPLIT, SKY AIR, VRV, CHILLERS

Replacement
topics: technology
The phase-out period for
R-22 is over.
Clear building
Act now! owner/investor
benefits of
replacement
TOOLS & PLATFORMS

technology
Avoid loss of business and replace your air conditioning
system now!
15-215
TECHNICAL DRAWINGS
Technical documentation:
PREVIOUS
Download all technical documentation such as engineering

databooks, selection software, installation and operation manuals and
service manuals directly from our business portal: my.daikin.eu
45
Supporting www.daikineurope.com/
support-and-manuals/
tools, software and apps software-downloads
Web based Xpress selection software

Making selection easy, anytime, anywhere
› Web & cloudbased, access to your projects from › No need to do local installation
anywhere, anyplace… › No tool updates required
› Platform (Windows, Mac, …) and hardware (always latest version available)
(laptop, desktop, tablet) independent › Possibility to copy / share projects
› Re-engineered GUI for maximum easy of use
Easy selection, anytime, anywhere
Main functions
Toolbox Working area
Detailed properties
Import / Export / Delete indoors
Easy editing of piping Intuitive interface
Clear wiring overview, easy to make control groups Clear overview of control groups and central controls
46
INTRODUCTION
Integrated features
2D floorplan REVIT import
How does it work? How does it work?
1 Import 2D floorplan 1 Design your building/rooms in revit
2 Define reference point & scale 2 Define loads (optional)
3 Position units 3 Place Daikin BIM objects & Draw pipes
4 Draw pipes 4 Export to Xpress
SOLUTIONS
5 Xpress calculates
--> Pipe lengths and heights are automatically
determined! › Model selection
› Pipe diameters
› Accurate pipe design › and validates selection
› Work faster
› Easy compliance check
SOLUTIONS
VRV Xpress integrates seamlessly with

our ventilation selection softwares
SOLUTIONS
Ventilation Xpress
Selection tool for ventilation devices (VAM, VKM). The

selection is based on given supply/extract airflows
(including fresh up and given ESP of supply/extract
ducting:
› Determines size of electrical heaters
› Visualisation of psychrometric chart
TOOLS & PLATFORMS

› Visualisation of selected configuration
› Required field settings mentioned in the report
ASTRA Web
› Quick AHU selection that will save you precious time, drastically reducing selection time
through the new software interface.
› Very competitive solution available within the Wizard thanks to pre-uploaded parameters.
› High selection quality, thanks to the intelligence embedded within the software core.
TECHNICAL DRAWINGS
Quickly select your air handling unit by following the wizard:
1 Select the series: D-AHU Professional, D-AHU Modular R, D-AHU Modular P,

Modular L and Modular T
2 Insert the air flow supply and return
3 Insert the summer/winter air supply setpoint
4 Insert the summer/winter outdoor and extract temperature
You will get immediately your 3D result and it’s ready to customize!
Now, you will be able to modify your unit (adding or changing components) in order
PREVIOUS
to have a product that meets all your needs.
When finished a technical report, price list, fan curve chart can be generated.
These final reports can be downloaded in different formats.
47
Plugins and third-party software tools
Building Information Modelling www.daikin.eu/
(BIM) support
bim
› BIM improves efficiency of design and build phase
› Daikin is among the first
to supply a full library of BIM objects
for its VRV products
Energy simulation and design aid tools

Seasonal simulator
› The Seasonal Simulator is an innovative software

tool that calculates and compares potential
seasonal efficiency ratings.
› This user-friendly tool compares various Daikin
systems, annual power consumption, CO2
emissions, and much more, to present an accurate
ROI calculation in a matter of minutes.
Psychrometrics diagram NEW

› The Psychrometrics Diagram Viewer demonstrates
the changing properties of moist air.
› With this tool, users can choose two points with
specific conditions, plot them on the diagram and
select actions to change the conditions, i.e. heat,
cool and mix air.
48
INTRODUCTION
Software service tools
Error code app
Quickly know the meaning of fault codes, for each

product family and the potential cause
D-Checker
D-checker is a software application used to record
SOLUTIONS
and monitor operation data of Daikin applied, split,
Multi-split, Sky-air units, Daikin Altherma LT, ground
source heat pump, Hybrid, ZEAS, Conveni-pack &
R410A Booster unit
Bluetooth adaptor NEW
Monitoring of Split, Sky Air and VRV data via any

bluetooth device
Diagnosis of the Bluetooth system possible:
› No need to access the outdoor unit
• Connects with D-Checker software (for laptops)
SOLUTIONS
• Connects with monitoring app (for tablets or
smartphones) Computer with Bluetooth
VRV Service-Checker
› Connected via F1/F2 bus to check multiple

systems at the same time
› Connection of external pressure sensors possible

Online support Internet
SOLUTIONS
Find our solution for different applications:
Business portal
Supermarket Technical
Restaurant
› Experience our new extranet that
thinks with you at my.daikin.eu Hotel Store & Bank Industry
shop
› Find information in seconds
Sport &
via a powerful search Home Office Leisure
› Customise the options so you
TOOLS & PLATFORMS

see only info relevant for you
› Access via mobile device or desktop
my.daikin.eu
ON › Get more commercial details on our flagship
THE products via our dedicated minisites
R OA D
TECHNICAL DRAWINGS
AT › See our references

C U S TO M E
RS
HOTEL PORTA FIRA

AT THE OFFICE
www.daikineurope.com/references
PREVIOUS
49
50
drawings
Technical
Modular T
Modular L
VKM-GBM75
EKVDX-A70
VAM-FC9/J862
57
52
51
CLICK HERE TO VIEW ALL CLICK HERE TO VIEW ALL
ATB TECHNICAL DRAWINGS ATB-S TECHNICAL DRAWINGS
ON MY.DAIKIN.EU ON MY.DAIKIN.EU
Detailed technical drawings
ATB03RA(S) ATB03LA(S)
Right Left
Exhaust Fresh air Return Supply Supply Return Fresh air Exhaust
Right Left
52
INTRODUCTION
Right Left
SOLUTIONS
SOLUTIONS
SOLUTIONS
Right Left
TOOLS & PLATFORMS

TECHNICAL DRAWINGS
PREVIOUS
53
Right Left
ATB03RA(S)/ATB03LA(S)
1000 1000 1000

SFPv 1200 SFPv 1200
900 SFPv 1600 900 SFPv 1600 900
SFPv 2000 SFPv 2000

800 800 800
700 700 700
600 600 600

ESP (Pa)
500 500 500
400 400 400
300 300 300

The diagram shows the available external pressure for the duct
200 system given an airflow.
200 200
SFPv = Specific Fan Power (W/m /s) 3
100 100
The SFPv curves are referring to the complete unit. Moreover,100
it
includes power to both supply and extract fan divided by either
the supply or extract volume whichever is the greater.
0 0 0
0 500 1000 1500 400 900 1400 1900 2400 0 1
Air Flow m3/h

54
INTRODUCTION
1000 1000 1000

00 SFPv 1200 SFPv 1200
00 900 SFPv 1600 900 SFPv 1600 900
00 SFPv 2000 SFPv 2000
800 800 800
SOLUTIONS
700 700 700
600 600 600

ESP (Pa)
500 500 500
400 400 400
SOLUTIONS
300 300 300
200 200 system given an airflow. 200
SFPv = Specific Fan Power (W/m3/s)

100 100 100
The SFPv curves are referring to the complete unit. Moreover, it
0 0 the supply or extract volume whichever is the greater. 0

1500 400 900 1400 1900 2400 0 1000 2000 3000 0 1000
SOLUTIONS
Air Flow m3/h
1000 1000 1000

Pv 1200 SFPv 1200 SFPv 1200
TOOLS & PLATFORMS

Pv 1600 900 SFPv 1600 900 SFPv 1600 900
Pv 2000 SFPv 2000 SFPv 2000

800 800 800
700 700 700
600 600 600

ESP (Pa)
TECHNICAL DRAWINGS
500 500 500
400 400 400
300 300 300

200 200 system given an airflow. 200
SFPv = Specific Fan Power (W/m /s) 3
100 100 The SFPv curves are referring to the complete unit. Moreover, it100
PREVIOUS

0 0 0
0 2400 0 1000 2000 3000 0 1000 2000 3000 4000 400 1400
Air Flow m3/h

55
1000 1000
1200 SFPv 1200 SFPv 1200
1600 900 SFPv 1600 900 SFPv 1600
2000 SFPv 2000 SFPv 2000

800 800
700 700
600 600
ESP (Pa)
500 500
400 400
300 300
200 200
system given an airflow.
100 100
0 0 supply or extract volume whichever is the greater.
the
3000 0 1000 2000 3000 4000 400 1400 2400 3400 4400 5400
Air Flow m /h 3
1000
00 SFPv 1200
00 900 SFPv 1600
00 SFPv 2000
800
700
600
ESP (Pa)
500
400
300
200 system given an airflow.
100 The SFPv curves are referring to the complete unit. Moreover, it
0
4000 400 1400 2400 3400 4400 5400
Air Flow m /h 3
56
CLICK HERE TO VIEW ALL CLICK HERE TO VIEW ALL CLICK HERE TO VIEW ALL CLICK HERE TO VIEW ALL
ALB-LBS TECHNICAL ALB-RBS TECHNICAL DRAWINGS ALB-LB TECHNICAL DRAWINGS ALB-RB TECHNICAL DRAWINGS
DRAWINGS ON MY.DAIKIN.EU ON MY.DAIKIN.EU ON MY.DAIKIN.EU ON MY.DAIKIN.EU
INTRODUCTION
ALB02RB(S)/ALB02LB(S)
SOLUTIONS
CONDENSATE
OUTLET 1/4”G
TOP VIEW BOTTOM VIEW
SOLUTIONS
ELECTRIC
SWITCH BOX
SOLUTIONS
TOOLS & PLATFORMS

CONDENSATE BOTTOM VIEW
OUTLET 1/4”G
TOP VIEW
TECHNICAL DRAWINGS
ELECTRIC
SWITCH
BOX
PREVIOUS
57
CONDENSATE
OUTLET 1/4”G
TOP VIEW
BOTTOM VIEW
ELECTRIC
SWITCH
BOX
CONDENSATE
OUTLET 1/4”G
TOP VIEW
BOTTOM VIEW
ELECTRIC
SWITCH
BOX
58
INTRODUCTION
600 800 800

SFPv 1200 SFPv 1200
SFPv 1600
700 700
SFPv 1600
500 SFPv 2000
SOLUTIONS
SFPv 2000 SFPv 2400
600 600
SFPv 2400
400
500 500
ESP (Pa)
300 400 400
300
SOLUTIONS
The diagram shows the available external pressure for the duct 300
200 C D system given an airflow.
200 C D 200
100 A B includes power to both supply and extract fan divided by either
the supply
100 or extractAvolume whichever isBthe greater. 100

Nominal working point
0 0 0
100 200 300 400 500 600 200 400 600 800 1000 1200
SOLUTIONS
Air Flow m3/h
800 800 600

SFPv 1200 SFPv 1200
TOOLS & PLATFORMS

SFPv 1600 SFPv 1600
700 700
SFPv 2000 SFPv 2000 500
SFPv 2400 SFPv 2400
600 600
400
500 500
ESP (Pa)
400 300
TECHNICAL DRAWINGS
400
300 300
The diagram shows the available external pressure for the duct 200
200 C D 200 C D
The SFPv curves are referring to the complete unit. Moreover, it 100
100 A B
includes
100 power to both
A
supply and extract
B
fan divided by either
PREVIOUS
0 0 0
600 200 400 600 800 1000 1200 500 700 900 1100 1300 1500 500
Air Flow m /h
3
59
800 600
SFPv 1200 SFPv 1200
SFPv 1600 SFPv 1600

700
SFPv 2000 500 SFPv 2000
SFPv 2400 SFPv 2400

600
400
500
ESP (Pa)
400 300
300 The diagram shows the available external pressure for the duct
200 given anCairflow.
system D

200 C D
The SFPv curves are referring to the complete unit. Moreover,
it includes
100 power
A to both supply and extract fan
B divided by either
100 A B the supply or extract volume whichever is the greater.

0 0
1200 500 700 900 1100 1300 1500 500 1000 1500 2000
Air Flow m3/h
600 600
SFPv 1200 SFPv 1200
SFPv 1600
SFPv 1600
500 SFPv 2000 500
SFPv 2400 SFPv 2000
SFPv 2400
400 400
ESP (Pa)
300 300
200 C D 200shows the available

The diagram C D for the duct
external pressure
100 A B The SFPv curves

100 are referring
A to the complete unit.
B Moreover, it
0 0
1500 500 1000 1500 2000 100 200 300 400 500 600
Air Flow m /h
3
60
INTRODUCTION
600 800
SFPv 1200 SFPv 1200
SFPv 1600
700
SFPv 1600
500 SFPv 2000
SFPv 2400
SOLUTIONS
SFPv 2000
600
SFPv 2400
400
500
ESP (Pa)
300 400
300
SOLUTIONS
200 C D system given an airflow.
200 C D
100 A B includes power to both supply and extract fan divided by either
the supply
100 or extractAvolume whichever isBthe greater.

0 0
100 200 300 400 500 600 200 400 600 800 1000 1200
SOLUTIONS
Air Flow m3/h
800
SFPv 1200
TOOLS & PLATFORMS

SFPv 1600
700
SFPv 2000
SFPv 2400
600
500
ESP (Pa)
400
TECHNICAL DRAWINGS
300
200 C D SFPv = Specific Fan Power (W/m3/s)
100 A B
PREVIOUS
0 Nominal working point

600 200 400 600 800 1000 1200
Air Flow m3/h
61
CLICK HERE TO VIEW ALL
VAM-FC9 TECHNICAL
DRAWINGS ON MY.DAIKIN.EU
VAM150FC9
Ceiling hook
Inspection hole 4-14x40 oval hole
285 Ø 450
269 Supply air fan
120~250
600
149 Maintenance cover 104 120.3
20
67
SA OA
124 164
124
Supply air to room Fresh air from outdoors
288
509
560
(Outdoor air)
288
164
RA EA
Return air from room Exhaust air to outdoors
8 Sealing
8
Sealing
120 104 718
20
149
Damper plate
Exhaust air fan
(Maintenance cover) Exhaust spacer
(Switch box)
145 760 145
Ø200
Ø97
Heat exchange elements Air filters
NOTES
1. Be sure to provide the inspection hole (450x450 mm) to inspect the air filters, the exchange elements and fans. 3TW27874-1
VAM250FC9
Switch box Maintenance space for the heat exchange elements, the air filters and fans
Inspection hole Ceiling hook

4-14x40 oval hole
285 Ø 450
269 Supply air fan

120~250
600
149 Maintenance cover

104 120.3
20
67
SA
OA
124 164
124
Supply air to room Fresh air from outdoors

288
509
560
288
(Outdoor air)
164
RA EA
Return air from room Exhaust air to outdoors
8
Sealing Sealing
8
120 104 718

20
149
Damper plate Exhaust air fan
(Maintenance cover)
(Switch box)
145 760 145
Ø200
Ø97
Heat exchange elements Air filters
NOTES
1. Be sure to provide the inspection hole (450x450 mm) to inspect the air filters, the exchange elements and fans. 3TW27884-1
62
VAM-J8 TECHNICAL
INTRODUCTION
VAM350-500J8
Ceiling hook
·4· - ·12· x ·40·mm oblong hole Damper panel
305 Exhaust air fan
1045
122 122
22
Sealing material
Sealing material
RA
Return air from room
EA Room air
292
Exhaust air to outdoors
137
417
291 126
Exhaust air 173
837
883
866
173
SOLUTIONS
125
SA
417
137 Sealing material
Supply air to room
Supply air
OA
Fresh outdoor air Supply air fan
Outdoor air
190
22
Sealing material
122 122
≥ 675
200 - 300
Sealing material
Sealing material
475
Inspection hole
SOLUTIONS
Switch box
Maintenance space for the air filters, heat exchangers and fans
900
Heat exchanger
78 1113 78
Ø 213
Ø 197
Switch box

Maintenance cover Air filter
SOLUTIONS
NOTES
1. To allow for the inspection of the air filters, heat exchangers, and fans, be sure to provide the inspection hole. 3D112815C
VAM650J8
Ceiling hook
·4· - ·12· x ·40·mm oblong hole
Exhaust air fan Damper panel
368 Sealing material
1266
154 154
22
Sealing material
Sealing material al
TOOLS & PLATFORMS

RA
EA
Exhaust air to outdoors Return air from room
Room air
272
222
Exhaust air 162

211
491
887
Sealing material 211

933
920
493
162
220
272
SA
OA Supply air to room
Fresh outdoor air Supply air
Outdoor air Supply air fan
186
Switch box
22
Option ·KRP2A51·
154 154
200-300
Mounting plate
≥ 700
Sealing material
TECHNICAL DRAWINGS
500
Inspection hole Option ·BRP4A50A·

Sealing material
1100
Heat exchanger
83 1354 83
Ø 262
Ø 245
Switch box
Air filter
PREVIOUS
Maintenance cover
NOTES
1. To allow for the inspection of the air filters, heat exchangers, and fans, be sure to provide the inspection hole. 3D113502A
63
VAM-J8 TECHNICAL
VAM800-1000J8
·4· - ·12· x ·40·mm oblong hole Damper panel

368 Exhaust air fan 1266
154 154
22
Sealing material
Sealing material
RA
Return air from room
EA
162
399
Room air
Exhaust air to outdoors
239
606
Exhaust air 212
1144
212
1172
1189
628
207
162 Sealing material SA
389
Supply air to room
Supply air
OA Supply air fan
Fresh outdoor air Sealing material
Outdoor air
192
22
154 154
200-300
Sealing material
≥ 850
650
Inspection hole
Sealing material
Switch box
Maintenance space for the air filters, heat exchangers and fans 1100
Heat exchanger
83 1354 83
Sealing material
Ø 262
Ø 245
Maintenance cover Switch box

Air filter
NOTES
1. To perform maintenance on the air filter, it is required to provide a service access panel. 3D112817D
VAM1500-2000J8
(2x) Exhaust air fan Ceiling hook Damper panel
·4· - ·12· x ·40·mm oblong hole
731 1266 (4x) Option ·EKPLEN200· 150 345
384 150
20
Sealing material
20
Sealing material
Sealing material
RA
380 (4x)
EA Return air from room

Exhaust air to outdoors Room air
360
348 250
Exhaust air
577
1144
1194
1172
1188
599
218
SA
OA Supply air to room
Fresh outdoor air Supply air
Outdoor air (2x) Supply air fan
198
20
20
Switch box
345 150 150 384
≥ 850
200 - 300
Sealing material Sealing

Sealing material
650
Inspection hole material
Switch box
1100
Heat exchanger
130 261 1354 261 130
26
Sealing material
Option ·KRP2A51·
Ø 350
Ø 330
Mounting plate
621
405
Switch box
Option ·BRP4A50A·
24
10
Maintenance cover Air filter
NOTES
1. To allow for the inspection of the air filters, heat exchangers, and fans, be sure to provide the inspection hole. 3D112818C
64
VAM-FC9 TECHNICAL
INTRODUCTION
VAM150FC9
250 20m
200
15m
SOLUTIONS
External static pressure [Pa]
150
Ultra-high
10m
100
High
Low
SOLUTIONS
5m
50
Ø 100
Pipe length
0
0 50 100 150 200 250

Air flow rate [m³/h]
SOLUTIONS
NOTES
1. The fan speeds are valid for ·230·V, ·50·Hz power supply. 4D100379A
VAM250FC9
250
TOOLS & PLATFORMS

200
Ultra-high
150
Ø 150
Pipe length
High
100 40m
TECHNICAL DRAWINGS
Low
30m
50 20m
10m
0
0 50 100 150 200 250 300
PREVIOUS
NOTES
1. The fan speeds are valid for ·230·V, ·50·Hz power supply. 4D100380A
65
VAM-J8 TECHNICAL
VAM350J8
250
UH15
200 Ultra-high speed
H15 125 m 300

150
UH8 100 m 250
L15
H8 200
100 75 m
UH1 150
L8
50 m UH15
100
50
L1 25 m 50 UH8
Ø200
H1 Duct length UH1
0 0
100 150 200 250 300 350 400 450 150 200 250 300 350 400 450
Air flow rate [m³/h] Air flow rate [m³/h]
High speed Low speed

200 200 Ultra-high speed

High speed
150 150
Low speed
100 100
H15
50 50
0 H8 0 L15
H1300 L1 L8
150 200 250 350 400 450 100 150 200 250 300 350 400 450
NOTES
1. The fan curves are determined with ·1/3· of the ESP on the outdoor side
(·EA & OA·), and ·2/3· of the ESP on the indoor side (·RA & SA·). LEGEND
EA = Exhaust air L1 = Low speed lower limit H15 = High speed upper limit
OA = Outdoor air L8 = Low speed factory setting UH1 = Ultra-high speed lower limit
RA = Room air L15 = Low speed upper limit UH8 = Ultra-high speed factory setting
SA = Supply air H1 = High speed lower limit UH15 = Ultra-high speed upper limit
2. Measured according to ·JIS B 8628 - 2003· H8 = High speed factory setting 3D113493B
VAM500J8
250
100 m
200
UH15 UH15
UH8 80 m
H15H15 Ultra-high speed
150
H8 60 m 250
UH1
L15
L15
H8 200
100
H1 40 m 150
L8
100
50
20 m
L1 50 UH15
Ø200 UH8
0 Duct length 0 UH1
150 200 250 300 350 400 450 500 550 600 250 300 350 400 450 500 550 600

High speed
150 150 Low speed
100 100
50 50
H15
L15
0 H1 0
H8
200 250 300 350 400 450 500 550 600 150 200 L1 250 300 350 400 450 L8 500
NOTES
1. The fan curves are determined with ·1/3· of the ESP on the outdoor side
(·EA & OA·), and ·2/3· of the ESP on the indoor side (·RA & SA·).
LEGEND
EA = Exhaust air
OA = Outdoor air L1 = Low speed lower limit H15 = High speed upper limit
L8 = Low speed factory setting UH1 = Ultra-high speed lower limit
66
VAM-J8 TECHNICAL
INTRODUCTION
VAM650J8
250
UH15
200
Ultra-high speed

UH8 200 m
250
H15
150
H8 160 m
200
UH1
100 L15 120 m 150
H1
SOLUTIONS
80 m 100
L8 UH15
50
40 m 50
L1 UH8
Ø250
0 Duct length 0
250 350 450 550 650 750 350 450 550 650 UH1 750

250 200
Ultra-high speed
200
150 High speed
SOLUTIONS
150 Low speed
100
100
50
50 H15
L15
0 H1 H8 0 L1
250 350 450 550 650 750 250 30 450 550 L8 650 750
NOTES
1. The fan curves are determined with 1/3 of the ESP on the outdoor side

(EA & OA), and 2/3 of the ESP on the indoor side (RA & SA). LEGEND
SOLUTIONS
VAM800J8
300
300 300
250
250 250
180m Ultra-highspeed
350
200 180m 180m Ultra-high

Ultra-high
speedspeed
150m 350300 350
TOOLS & PLATFORMS

200 200
150m 150m 300250 300
u 150 120m
u u
150 150 250200 250
120m 120m u
90m
100
200150 200
90m 90m u u
x 100 L8 100 60m
150100 150
x xL850 L1
L8 60m
30m
60m
x 100 50 100
50 50
L1 0 L1
,
30m
Ø250
30m
Duct length x 50 0x 50
300 400 500 600 700 800 , 900 ,
Ø250 Ø250
0 0 Air flow rate (m3/h) Duct length
Duct length
0
400
0
500 600 700 800 900
300 300 400 400 Air flow
500 500 rate [m³/h]
600 600 700 700 800 800 900 900
400 400 500 500 600
Air600flow rate
Air flow
700
[m³/h]
rate (m3
700
/h)
800 800 900 900
Air flow rate
Air flow
(m /h)
3
rate (m /h)
3
Air flow rate (m3/h)

Air flow rate (m3/h)
300High speed 250 Low speed
TECHNICAL DRAWINGS
300 300
Ultra-high speed
250 250
250
200
250 250
High speed
200 200 200
, ,
Low speed
150
u 200 200
u
150
u
150 ,150
, , , -
150
100
150
H15 u
100
- -
100 100
100 100 H15 u
H15 u50
50
50 50
50 50
0 HS 0
400 500 600 700 800 900 300 400 500 600 700 800 900
0 0 HS HS 0 0
Air flow rate (m3/h) Air flow rate (m3/h)
400 400 500 500 600 600 700 700 800 800 900 900 300 300 400 400 500 500 600 600 700 700 800 800 900 900
AirAirflow rate
flow rate
Air [m³/h]
(m /h)
flow rate
3
(m /h) 3
Air flow rate
Air flow
(m /h)
rate (m /h) 3 3
NOTES
PREVIOUS
2. Measured according to ·JIS B 8628 - 2003· H8 = High speed factory setting 3D112837A
67
VAM-J8 TECHNICAL
300
VAM1000J8 UH15 150m
350
250
300 UH8 Ultra-high speed 120m 300
UH15 150m H15
200 350
250

250 UH1 90m
UH8 120m H8 300 200
150
200 H15 L15
H1 250 150
UH1 90m
100
H8 L8 200
150 100
L15
50 150 30m 50
H1 L1
100 UH15
L8 100 0
0
50 30m 400 500
50
600 700 800 900 1000 1100 UH8 600 700 800
L1 Ø250
Duct length 0 UH1
0
400 500 600 700 800 900 1000 1100 600 700 800 900 1000 1100
Air flow rate [m³/h] 300 Air flow rate [m³/h] 250
250 200
300 250

200
150
250 200
150
100
200 100 150 H15
150 50
50
100 L1
100 0 H1 H8 0
H15 400 500 600
500 60050 700 800 900 1000
50 L15
0 L1
0 H1 H8
400 500 600 700 L8 800 900
500 600 700 800 900 1000
Ultra-high speed
Ultra-high speed
High speed
High speed
Low speed
Low speed
NOTES Ultra-high speed
LEGEND
High speed
(EA & OA), and 2/3 of the ESP on the indoor side (RA & SA). Low speed
300
VAM1500J8 UH15
150m
350
300
250
UH8 120m 300
H15
UH15 200 Ultra-high speed

250 250
UH1 90m
H8 350
200
150
H15
200 180m
L15 300
UH8 150
150m H1
150 100
L15 L8 250
100
H8 120m
100
UH1 50 200
30m 50
90m
L1 UH15
H1 150
L8 60m 0 0
50
400 500 600100 700 800 900 1000 1100 600 700 800
30m
L1 2 x Ø250
UH8
0 Duct length 50
700 900 1100 1300 1500 1700
0
UH1
Air flow rate [m³/h] 300 700 900 1100 1300 1500 1700 250
High speed 250 Low speed 200
300 250
200
150
250
150
200
200
100
100
150 H15
50
150 50
100
0 L1
100 H15
0 H1 H8
500 600 700 800 900 1000 400 500 600
50 L15
50
H1 H8
0 0
L1 L8
700 900 1100 1300 1500 1700 700 900 1100 1300 1500
Ultra-high speed
Ultra-high speed
High speed
High speed
Low speed
Low speed
NOTES
68
VAM-J8 TECHNICAL
INTRODUCTION
300
VAM2000J8 UH15 150m
350
250
300
150m UH8 120m 300
UH15 200 H15
UH1 Ultra-high speed 250
90m
250
H8 200

120m
UH8 150 350
H15 L15
200
H1 300 150
UH1 100
90m
L8 250 100
H8
150
L15 50 200 30m 50
H1 L1
60m
150
100
L8 0 UH15 0
SOLUTIONS
400 500 600
100 700 800 900 1000 1100 600 700 800
30m
50
L1 50 UH8
2 x Ø250
Duct length 0 UH1
0 1200 1400 1600 1800 2000 2200
800 1000 1200 1400 1600 1800 2000 2200
300 250
Air flow rate [m³/h] 250 Air flow rate [m³/h]
200
300
200
250
150

250
150
200 100
100
200 H15
150 50
50
150
0 L1
100
0 H1 H8
400 500 600
SOLUTIONS
100 500 600 700 800 900 1000
H15
50
50
L15
H1 H8 L1
0 0
L8
1000 1200 1400 1600 1800 2000 800 1000 1200 1400 1600 1800
Ultra-high speed
Ultra-high speed
High speed
High speed
Low speed
Low speed
NOTES

SOLUTIONS
TOOLS & PLATFORMS

TECHNICAL DRAWINGS
PREVIOUS
69
EKVDX-A TECHNICAL
EKVDX32A
Service space
·300· or more
40 550 163
2 x 65 = 130
342 25 809 84
50 69 301
Suspension bolt KD KF 10 KH
39
62
109
65
100
178
KK
250
KJ
View ·A· 00
KL O2
2x140= 280 32 KG 179 50 KE
365 ·600· or more
Service space View ·B·
View ·B·
900
588 Suspension position
4x65= 260
600
KA
Adjustable
0 - 625
See note ·3·
KC
550
KB
View ·B·
Inspection door
View ·A· (Ceiling opening)
Item Name Description

KA Liquid pipe connection port ·Ø6.35· flared connection
KB Gas pipe connection port ·Ø12.70· flared connection
KC Accessory pipe ·Ø9.52· flared connection
KD Drain pipe connection VP20 (OD Ø26, ID Ø20)
KE Wiring connection /
KF Power supply connection /
KG Drain outlet VP20 (OD Ø26, ID Ø20)
KH Air inlet flange /
KJ Air suction side /
NOTES KK Air discharge side /
1. When installing optional accessories, refer to their respective documentation. KL Nameplate /
2. The ceiling depth varies according to the documentation of the specific system.
3. Mandatory in case of using ·R32· refrigerant
3D127967
EKVDX50A
Service space
·300· or more
40 700 69
2 x 65 = 130
492 25 809 130

50 301 74
Suspension bolt KC KE KG
39
62
109
65
178
100
KJ
250
KH
0
View ·A·
O 25
KK
3x140= 420 32 179 50
KF KD
515 ·600· or more
Service space
View ·B· 950

600
6 x 65 = 390
Adjustable
0 - 625
KA
700
KB
View ·A· View ·B·

Inspection door
(Ceiling opening)

KC Drain pipe connection VP20 (OD Ø26, ID Ø20)
KD Wiring connection /
KE Power supply connection /
KF Drain outlet VP20 (OD Ø26, ID Ø20)
KG Air inlet flange /
KH Air suction side /
KJ Air discharge side /
NOTES KK Nameplate /
1. When installing optional accessories, refer to their respective documentation.
2. The ceiling depth varies according to the documentation of the specific system. 3D127968
70
EKVDX-A TECHNICAL
INTRODUCTION
EKVDX80A
Service space
·300· or more
40 1000 176
2 x 65 = 130
792 Suspension bolt
25 809 130
50 76 301 74
KE KG KJ
39
62
109
65
178
100
KL
250
KK 0
View ·A· O 25
KM
5x146= 730 32 179 50
KH KF
SOLUTIONS
815 ·600· or more 950
Service space View
View ·B· B·
600
625
11 x 65 = 715
0-
Adjustable
1000
KA
Suspension position
View ·A·
KB View ·B·
See note ·3· Inspection door
KC KD (Ceiling opening)
SOLUTIONS
630

KB Accessory pipe ·Ø6.35· flared connection
KC Gas pipe connection port ·Ø15.90· flared connection
KD Accessory pipe ·Ø12.70· flared connection
KE Drain pipe connection VP20 (OD Ø26, ID Ø20)
KF Wiring connection /
KG Power supply connection /
KH Drain outlet VP20 (OD Ø26, ID Ø20)
KJ Air inlet flange /

KK Air suction side /
NOTES KL Air discharge side /
KM Nameplate /
SOLUTIONS
2. The ceiling depth varies according to the documentation of the specific system.
3. Mandatory in case of using ·R32· refrigerant
3D127969
EKVDX100A
Service space
·300· or more
2 x 65 = 130
40 1400 69
25 809 130
1192
301 238 362
50 Suspension bolt KC KE KG KG
39
TOOLS & PLATFORMS

62
109
178
100
65
250
KJ KH 0 0
View ·A· O 25 O 25
KK
7x156= 1092 32 179 50 950
KF KD
1215 ·600· or more
Service space View
View ·B··B·
600

Adjustable
1400
0 - 625
16x65= 1040
TECHNICAL DRAWINGS
KA
KB View ·A· View ·B·

Inspection door
(Ceiling opening)

KC Drain pipe connection VP20 (OD Ø26, ID Ø20)
KD Wiring connection /
KE Power supply connection /
KF Drain outlet VP20 (OD Ø26, ID Ø20)
PREVIOUS
KG Air inlet flange /

KH Air suction side /
KJ Air discharge side /
NOTES KK Nameplate /
2. The ceiling depth varies according to the documentation of the specific system. 3D127970
71
H8
50 50
UH1 UH15
EKVDX-A TECHNICAL
Detailed technical H1drawings 0
300 350 400 450 500 550 600
0
300 350 400
UH1
450 500 550
UH8
600
EKVDX32A
200
200
Ultra-high speed
200
20m

150
150 UH15 150
UH8
100
100 100
H15
H8
50
50 50
UH1 UH15
H15
H1 UH1
0 0 H1 UH8
300 350 400 450 500 550 600 300 350
350 400
400 H8 450
450 500
500 550550 600600

High speed
200

LEGEND
H1 = High speed lower limit 150
H8 = High speed factory setting
H15 = High speed upper limit
UH1 = Ultra-high speed lower limit
100
UH8 = Ultra-high speed factory setting
UH15 = Ultra-high speed upper limit
50
H15
Ultra-high speed
0 H1
High speed 300 350 400 H8 450 500 550 600
200 200
20m
NOTES
150 UH15 150
1. The fan curves are determined with ·1/3· of the ESP on the outdoor side (·EA & OA·), and ·2/3· of the ESP on the indoor side (·RA & SA·).
EA = Exhaust air UH8
OA = Outdoor air
RA 100
= Room air 100
H15
SA = Supply air
2. The designed airflow of the systemH8 at H and UH tap should be kept as shown in the graphs. If the ·VAM· airflow is out of this range, the compressor of the outdoor unit
may stop
50 for selfprotection purposes.
UH1
50
UH15
3. Unit operation with R32 refrigerant is possible in the shaded area of the graphs, but the R32 safety alarm will be triggered if the system airflow drops within this area
during operation. No selection in this area is allowed.
4. Measured
0
H1 - 2003·
according to ·JIS B 8628 0
UH1 3D138264
UH8
300 350 400 450 500 550 600 300 350 400 450 500 550 600
EKVDX50A
200
Ultra-high speed
200
200
150 150
150
UH15
UH8 100
100
100
H15
50
H8 UH15
50
50
UH1
H15
0 H1
300 UH1 350 400 H8 450 500 550 600
0 0
500 550 600 650 700 750 UH8
500 550 600 650 700 750

High speed
200
LEGEND
H1 = High speed lower limit

150
100
Ultra-high speed
50 H15
High speed
0
H8
500 550 600 650 700 750

NOTES
EA = Exhaust air
OA = Outdoor air
RA = Room air
SA = Supply air
2. The designed airflow of the system at H and UH tap should be kept as shown in the graphs. If the ·VAM· airflow is out of this range, the compressor of the outdoor unit
may stop for selfprotection purposes.
3. Measured according to ·JIS B 8628 - 2003· 3D138265
72
H8
50
CLICK HERE TO VIEW ALL 50
UH1 UH15
EKVDX-A TECHNICAL
H1 UH1
INTRODUCTION
0 0 UH8
300 350 400 450 500 550 600 300 350 400 450 500 550 600
EKVDX50A
200 Ultra-high speed
300
300

250 250
150
UH15
200 200
H15
100
150 150
UH8
UH15
100 10050
H8
50 50
UH1 H15
SOLUTIONS
H1 0 H1
0 0 300 350 UH1 400 H8 450 500 550 600
UH8
500 600 700 800 900 500 600 700 800 900
High speed
250
LEGEND

200
150
100 H15
SOLUTIONS
50
Ultra-high speed
High speed H1
0
500 600 700 H8 800 900

200 200
20m
150 UH15 150

NOTES
UH8
EA 100
= Exhaust air 100

H15
OA = Outdoor air
RA = Room air H8
SA = 50 Supply air 50
SOLUTIONS
UH1 UH15
may stop for self-protection purposes.
3. Measured
0
H1 - 2003·
UH1 3D138266
UH8
300 350 400 450 500 550 600 300 350 400 450 500 550 600
EKVDX80A
200
200
Ultra-high speed
UH15
200
150 150
150
UH8
TOOLS & PLATFORMS

100 100
100
H15 UH15
50 50
50
H8
UH1 UH1
0
800 850 900 950 1000 1050
UH8 1100 H15
0
800 850 900 950 1000 1050 1100 0
300
H1
350 Air flow
400 rate
H8
[m³/h]
450 500 550 600
High speed
150

LEGEND 100

TECHNICAL DRAWINGS

UH8 = Ultra-high speed factory setting 50
UH15 = Ultra-high speed upper limit H15
0
800 850 H8 900 950 1000 1050 1100
Ultra-high speed
High speed Air flow rate [m³/h]
NOTES s
EA = Exhaust air
PREVIOUS
OA = Outdoor air
RA = Room air
SA = Supply air
73
H8
50 50
UH1 UH15
EKVDX-A TECHNICAL
Detailed technical H1drawings 0
300 350 400 450 500 550 600
0
300 350 400
UH1
450 500 550
UH8
600
EKVDX100A
200
250
Ultra-high speed
250

UH15
200 150
200
150 150
H15
100 UH15
100 UH8 100
50
50 H8 50
UH1
H15
UH1
0 0 0 H1 UH8
1100 1300 1500 1700 3001100 350 1300 400 H8 450 1500 500 5501700 600

High speed
200

LEGEND 150

H15
H15 = High speed upper limit 100

UH15 = Ultra-high speed upper limit 50
0
1100 1300 H8 1500 1700
Ultra-high speed
High speed
200 200
20m
150 UH15 150

NOTES p
UH8
EA 100
= Exhaust air 100
H15
OA = Outdoor air
RA = Room air H8
SA = 50 Supply air 50
UH1 UH15
3. Measured
0
H1 - 2003·
UH1 3D138268
UH8
300 350 400 450 500 550 600 300 350 400 450 500 550 600
EKVDX100A
250
UH15
200 200 150
UH8
150 H15 150

100
H8
100
100 UH15
UH1
50
50
50 H1
4 UH1 H15
0 H1
0 300 350 400 H8 450 500
UH8
550 600
0 1100 1300 1500 1700 1900 2100
1100 1300 1500 1700 1900 2100
Air flow rate [m³/h] High speed
250
LEGEND
200
H15 = High speed upper limit H8
UH8 = Ultra-high speed factory setting 150
100
Ultra-high speed
High speed 50
H1
H15
0
1100 1300 1500 1700 1900

NOTES
EA = Exhaust air
OA = Outdoor air
RA = Room air
SA = Supply air
74
VKM-GBM TECHNICAL
INTRODUCTION
VKM50GBM
Air discharge grille

(locally procured)
Air suction grille
(locally procured)
Heat insulator
(locally procured)
SOLUTIONS
Heat insulated
EA
(Exhaust air to outdoors) (locally procured)
Branch duct
(locally procured)
Round shape hood
(locally procured)
OA
(Fresh air to outdoors)
Control box
More than 600

Flexible duct Air discharge grille
(locally procured) (locally procured)
Inspection Inspection
hatch hatch
Maintenance space for the heat exchanger
elements the air filters, fans and humidifier
360 (in case of  450 inspection hatch)
SOLUTIONS
Water supply shut-off valve
Cistern tank (locally procured) Drain valve
(locally procured) Refrigerant piping (Gas pipe)
(Ø 12.7 flare connection)
A gradient of
more than 1/30 Strainer Refrigerant piping (Liquid pipe)
(locally procured) (Ø 6.4 flare connection)
Ø 200
Nominal diameter
(locally procured)

OA
SOLUTIONS
EA
(Exhaust air to outdoors)
□ 450 - 600 Suspention bolt
Sloping downwards at a Inspection hatch (locally procured) RA SA
gradient of the 1/100 (locally procured) (Return air from room) (Return air from room)
TOOLS & PLATFORMS

NOTES
1. Leave space for servicing the unit and include inspection hatch. (Always open a hole on the side of the control box so that the air filters heat exchange
elements, and fans can easily be inspected and serviced.)
2. Install the two outdoor ducts with down slope (slope of 1/30 or more) to prevent entry of rain water, also, provide insulation for three ducts (outdoor ducts
and indoor supply air duct) to prevent dew condensation. (Material: glass wool of 25mm thick)
3. Do not turn the unit upside down.
4. Use city water or clean water.
Include water supply piping with strainer, a water supply shut-off valve, and a drain valve (both locally procured) somewhere along the water supply piping
that can be reached from the inspection.
5. It is impossible to connect the water supply piping directly to public piping. Use a cistern tank (of the approved type), if you need to get your water supply
from public piping.
TECHNICAL DRAWINGS
6. Make sure the supply water 0.02MPa to 0.49MPa (0.2 kg/cm2 to 5 kg/cm2)
7. Make sure the supply water is between 5°C and 40°C in temperature.
8. Insulate the water supply piping to prevent condensation from forming.
9. Make sure to install drain piping, and insulate drain piping to prevent dew condensation.
10. Keep the drain pipe short and sloping downwards at a gradient of at least 1/100 to prevent air from forming.
11. Install in a location where the air around the unit or taken into the umidifier will not drop below 0°C.
12. Do not use a bent cap or a round hood as the outdoor hood if they might get rained on directly (we recommend using a deep hood) (optional accessory).
13. In areas where freezing may occur, always take steps to prevent the pipes from freezing.
14. Do not place something which shouldn’t get wet at the below of this unit. The dew would fall at following case, where humidity is 80% more, or the exit of
drain socket is choked up, or the air filter is very dirty.
15. Feed clean water. If the supply water is hard water, use a water softener because of short life.
Life of humidifying element is about 3 years (4,000 hours), under the supply water conditions of hardness: 150 mg/L. (Life of humidifying element is about
1 years (1,500 hours), under the supply water conditions of hardness: 400 mg/L.)
PREVIOUS
3D083011
75
VKM-GBM TECHNICAL
VKM80GBM
Air suction grille Air discharge grille

Heat insulator (locally procured) (locally procured)
(locally procured)
Heat insulated
EA Branch duct (locally procured)
Round shape hood
(locally procured)
OA Silencer
(Fresh air to outdoors) (locally procured)
Flexible duct Air discharge grille
More than 600

Control box
Maintenance space for the heat exchanger hatch hatch

Water supply shut-off valve Refrigerant piping (Gas pipe)
Cistern tank (locally procured) (Ø 12.7 flare connection)
Drain valve
(locally procured) Refrigerant piping (Liquid pipe)
A gradient of (Ø 6.4 flare connection)
more than 1/30 Strainer
(locally procured)
Ø 250
Nominal diameter
(locally procured)
EA
OA
□ 450 - 600 Suspention bolt
(locally procured)
Sloping downwards at a Inspection hatch RA SA
NOTES
1. Leave space for servicing the unit and include inspection hatch. (Always open a hole on the side of the control box so that the air filters heat exchange
elements, and fans can easily be inspected and serviced.)
2. Install the two outdoor ducts with down slope (slope of 1/30 or more) to prevent entry of rain water, also, provide insulation for three ducts (outdoor ducts
from public piping.
3D083012
76
VKM-GBM TECHNICAL
INTRODUCTION
VKM100GBM
Air suction grille Air discharge grille
Heat insulator (locally procured) (locally procured)
(locally procured)
SOLUTIONS
Heat insulated
EA Branch duct (locally procured)
Round shape hood
(locally procured)
OA Silencer
(Fresh air to outdoors) (locally procured)
Control box Flexible duct Air discharge grille
More than 600
Maintenance space for the heat exchanger hatch hatch
SOLUTIONS

Water supply shut-off valve Refrigerant piping (Gas pipe)
Cistern tank (locally procured) (Ø 12.7 flare connection)
Drain valve
(locally procured) Refrigerant piping (Liquid pipe)
A gradient of (Ø 6.4 flare connection)
more than 1/30 Strainer
(locally procured)

Ø 250
Nominal diameter
(locally procured)
SOLUTIONS
OA
EA
□ 450 • 600 Suspention bolt
Sloping downwards at a Inspection hatch (locally procured) RA SA
TOOLS & PLATFORMS

NOTES
1. Leave space for servicing the unit and include inspection hatch. (Always open a hole on the side of the control box so that the air filters, heat exchange
elements, fans and humidifier elements can easily be inspected and serviced.)
2. Install the two outdoor ducts with down slope (slope of 1/30 or more) to prevent entry of rain water. Also, provide insulation for three ducts (outdoor ducts
from public piping.
TECHNICAL DRAWINGS
PREVIOUS
3D083013
77
VKM-GBM TECHNICAL
VKM50GBM
Exchange
50Hz, 220V-240V efficiency
(%)
Operating air flow rate range
Temp VKM50GBM
e rature
excha
Enth nge e
alpy fficie
ncy
exch
ang
e effi
Enth cien
alpy cy (h
exch eatin Operating air flow rate range Operating air flow rate range Operating air flow rate range
ange g)
effic ø200
ienc
y (co Pipe
External static pressure (Pa)
oling length
)

Ultra High
High
Low
Air flow rate [m³/h] Air flow rate [m³/h] Air flow rate [m³/h] Air flow rate [m³/h]
Low High Ultra High
[READING OF PERFORMANCE CHARACTERISTICS]
1. For example: 19(29)--07
Mode no.: 19(29)
First code:  (Supply ┌2 Exhaust ┌3 )
Second code no.: 07 ┘ ┘
3D082901
2. Rated point: 
3. The characteristic of each tap becomes a setup of the characteristic of the same code number. 3D082901
VKM80GBM
VKM80GBM
50Hz, 220V-240V
Exchange
efficiency
Operating air flow (%) Operating air flow rate range Operating air flow rate range Operating air flow rate range
rate range
VKM80GBM
Tempe
rature
exchan
ge effic
Enth iency
alpy
exch
ang
Enth e effi
cien
alpy
exch cy (h
ang eatin
e effi g)
cien
cy (c
ooli
ng)
Ultra High ø250

Pipe
length
High
Low
Low High Ultra High
1. For example: 19(29)--07
Mode no.: 19(29)
2. Rated point: 
78
VKM-GBM TECHNICAL
INTRODUCTION
VKM100GBM
Exchange efficiency
50Hz, 220V-240V (%)
Operating air flow rate

range
Operating air flow rate range Operating air flow rate range Operating air flow rate range
Tem VKM100GBM
SOLUTIONS
per
atu
En re e
tha xch
lpy a nge
exc effi
ha cien
ng cy
ee
Ent ffic
hal ien
py cy
e xch (he

a ng ati
ee ng
ffic )
ie ncy ø200
(co Pipe
o ling
) length
Ultra High
High
SOLUTIONS
Low
Low High Ultra High
1. For example: 19(29)--07

Mode no.: 19(29)
SOLUTIONS
2. Rated point: 
TOOLS & PLATFORMS

TECHNICAL DRAWINGS
PREVIOUS
79
Daikin Europe N.V. Naamloze Vennootschap Zandvoordestraat 300 · 8400 Oostende · Belgium · www.daikin.eu · BE 0412 120 336 · RPR Oostende (Publisher)
Daikin Europe N.V participates in the Eurovent Certified

Performance programme for Fan Coil Units and Variable
Refrigerant Flow systems. Daikin Applied Europe S.p.A
participates in the Eurovent Certified Performance programme
for Liquid Chilling Packages, Hydronic Heat Pumps and Air
Handling Units.
ECPEN23-20305/23 Check ongoing validity of certificate:
www.eurovent-certification.com
The present publication is drawn up by way of information only and does not constitute an offer binding upon
Daikin Europe N.V. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge. No
express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its
content and the products and services presented therein. Specifications are subject to change without prior notice.
Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from
or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V.
Printed on non-chlorinated paper.

203 - Ventilation Product Catalogue For Professionals

Uploaded by

Copyright:

Available Formats

203 - Ventilation Product Catalogue For Professionals

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

203 - Ventilation Product Catalogue For Professionals

Uploaded by

Copyright:

Available Formats

Ventilation

Product catalogue 2023

Fresh air for the commercial sector

DX AIR HANDLING UNIT

of contents Centralized ventilation solutions 22

TOOLS & PLATFORMS

Tools and platforms 43

A well-maintained ventilation system and adequate air-

› Compact design for false ceiling installation

DX AIR HANDLING UNIT

› DX coil for post-treatment of fresh air

› With DX coil for post-treated fresh air

TOOLS & PLATFORMS

› High efficiency aluminium plate heat exchanger

› Rotary heat exchanger (sorption and sensible technology)

D-AHU MODULAR R  500 m3/h up to 25,000 m3/h

1 Market leading controls

2 Unique installation benefits

DX AIR HANDLING UNIT

TOOLS & PLATFORMS

COGNITIVE FUNCTION SCORES …

CO2 levels and ventilation rates all have significant,

CONDITIONS GREEN BUILDING CONDITIONS

Daikin offers a variety of solutions from small energy recovery

Daikin offers state-of-the-art ventilation solutions that can easily be integrated

Energy Recovery Ventilation

Our energy recovery units recover sensible energy (Modular L / Modular T) or

Ventilation with DX connection - Control over fresh air temperature

Daikin offers a range of inverter condensing units to be used in combination with

Air flow range

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500m3/h

More details and final information

DX AIR HANDLING UNIT

TOOLS & PLATFORMS

More details and final information

clicking the QR codes. Modular L

Height mm 150 200 300 400

› Thinnest High Efficiency Enthalpy Heat Exchanger

More details and final information

TOOLS & PLATFORMS

GSIEKA10009 GSIEKA15018 GSIEKA20024 GSIEKA25030 GSIEKA35530

Nominal current A 4.1 8.2 10.9 13.1 13.1

DX coil for post treatment

EKVDX - DX coil for post

VAM energy Fresh air

Vertical installation of VAM Upside-down installation of VAM Flexibility in positioning

› Fresh air flows from 500 up to 2,000 m³/h

TOOLS & PLATFORMS

EKVDX32A + EKVDX50A + EKVDX50A + EKVDX80A + EKVDX100A + EKVDX100A +

level - 50Hz High dBA 30.5 32 34 38 37 40

Energy recovery ventilation,

› Energy saving ventilation using indoor heating,

More details and final information

intelligent Tablet Controller

intelligent Touch Controller

intelligent Touch Manager

ePM10 75% (M5)

ePM1 50% (F7)

ePM1 80% (F9)

of contents Centralized ventilation solutions 22

Tools and platforms 43

D-AHU MODULAR R 500 m3/h up to 25,000 m3/h