Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Smartcare Tile Coat Pis

    Uploaded by

    um24019

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Smartcare Tile Coat Pis

    Uploaded by

    um24019
    5 views2 pages

    Original Title

    smartcare-tile-coat-pis

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views2 pages

    Smartcare Tile Coat Pis

    Uploaded by

    um24019

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PRODUCT CODE 1B18

    SmartCare Tile Coat


    SmartCare Tile Coat is a single component, ready to use, UV stable, clear waterproof coating for
    terraces with mosaic tiles on horizontal surfaces.

    PRODUCT BENEFITS
    Warranty Crack Bridging
    2 years of waterproofing warranty on mosaic Good crack bridging ability due to elastomeric
    tiles on terraces properties
    Waterproofing Adhesion
    Waterproofing protection of upto 2 bars of Strong adhesion to the mosaic tiled substrate
    hydrostatic pressure
    Excellent Resistance
    Clear Coating Excellent resistance against UV, infrared rays, algal
    The transparent film maintains the beauty of the and fungal growth
    mosaic tiled surface
    Easy Application
    Single pack, self-priming and easy to apply

    AVAILABLE PACKS COLOURS AVAILABLE COVERAGE

    Clear
    35 sq.ft. / Ltr
    4L 20L

    Shelf life: 3 years from date of manufacture in original tightly


    closed containers away from direct sunlight and excessive heat.

    DRYING TIME TO TOUCH RECOMMENDED USAGE

    2-3
    0

    45 15

    30 HOURS

    Can be used on mosaic tile surfaces on building roofs and terraces

    Surface Preparation: Application Method:


    • Prepare the surface by cleaning and ensure that it is free of dust, • Before application, mix the material well with mechanical mixer to
    oil, grease, grime and loose particles etc. get homogeneous brushable consistency.
    • Remove any loosely adhered tile or chips, if any • Apply 1st coat of SmartCare Tile coat with brush followed by roller.
    • The substrate must be checked for its soundness. Small cracks Allow it to dry completely for 2-3 hours.
    (3mm or less) should be opened, cleaned & filled with SmartCare • Apply 2nd coat of SmartCare Tile coat in the direction
    Crack Seal. Bigger cracks, damaged portions & hollow areas must perpendicular to the first coat and allow it to dry for 2-3 hours.
    be repaired with polymer modified screed.
    • Apply 3rd coat in the direction of the first coat and allow it to dry
    for 3 days for complete curing
    • Achieve a forced system coverage of 3.25 sq. mtr./L or 35 sq.ft./L
    in 3 coats.

    Post Painting Care – For the best performance of the coat, ensure proper washing only with water and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
    Form: Ready to use viscous liquid It should not be applied while direct contact with water. The surface coated with Tile coat should
    Density: 1.02 +/- 10% be allowed to dry completely for at least 3 days without water contact, after which foot traffic can
    Application Temperature: 18 to 40 degree C commence.
    Solid %: 40 +/- 3%
    The product is specifically designed for foot traffic and not for vehicle, point load or equipment or
    Crack Bridging Ability: 0.4 mm +/- 10% as
    machinery movement, which may rupture the coating.
    per ASNZ 4548 at recommended coverage of
    35 sq.ft./L All the corners, joints, protrusions, and outlets should be coated with two extra coats of Tile Coat.
    Adhesion to substrate: >1.5 MPa, as per For ceramic/vitrified tiles, itching with cerium oxide powder should be done as part of surface
    ASTM D 4541
    preparation for smoother application and proper adhesion.
    Use Asian Paints SmartCare Joints Tapes at all joints & corners for better reinforcement.
    The forced coverage leads to long term performance hence it is recommended to ensure coverage
    as per datasheet only.
    Do not apply during rains or extreme temperatures.
    Not recommended for rain water harvesting purpose.
    Avoid abuses which may lead to puncturing of membrane.

    Kindly refer to the MSDS for Asian Paints SmartCare Tile Coat which gives detailed information
    on safety measures while handling the paint, which is available on request.
    Store the container with the lid tightly closed in an upright position, in a cool, dry place
    Keep out of reach of children and away from eatables.
    May be harmful if swallowed. In case of ingestion seek immediate medical attention.
    Wear eye protection during application. In case of contact with eyes, rinse immediately with
    plenty of water and seek medical advice.
    In case of skin contact immediately wash skin with soap and plenty of water. Get medical
    attention if irritation develops or persists.
    Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding
    and surface preparation to avoid dust inhalation
    Do not pour leftover paint down the drain or in water courses.
    In the event of spills, contain spillage using sand or earth.
    No added Lead, Mercury or Chromium compounds.

    Version No. VN 27/06/2022

    Version No. VN 27/06/2022. Please note that this datasheet supersedes all previous versions. For Feedback/complaints, write to Customer Centricity
    Manager at Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India or call 1800-209-5678 or email to [email protected]

    You might also like