SoundBar

Training Manual
HW-MS6501/ZL
 • Output
- 180W(20Wx9)

• Built in Woofer

• One Power Cable

• Supported products Device

- Mobile : iOS 6.0 or above HW-MS650
Android ver.2.3.3
(Gingerbread) or above
with compatible Android
device

• Bluetooth, Wi-Fi
USB(Service Only)

• Wireless Surround
Speaker(SWA-9000S, Not
supplied) HW-MS6500
Componentes
Panel frontal/ lateral derecho
Panel inferior
Panel inferior
Conexión del suministro eléctrico
Conexión HDMI ARC (Audio Return Channel)
Conexión cable óptico
Conexión vía Bluetooth
Conexión vía WI-FI
Conexión vía WI-FI
Conexión de un dispositivo externo HDMI
Conexión con un cable de audio óptico o analógico (AUX)
Control Remoto
Control Remoto
Control Remoto
Control Remoto
Opciones ocultas

Hidden Button

Remote Control Button Function Description

Use the TV menu to set the TV

Surround 5sec TV remote control On/Off speaker on a Samsung TV to
external speakers.

Source 5sec BT Paring

You can turn Anynet+ and Auto

Play/Pause 5sec Auto Power Down On/Off (AUX mode)
Power Link on or off.
Auto Power Link automatically turns
Left 5sec Auto Power Link ON/OFF on the Soundbar when the TV is
turned on.
You can turn Anynet+ and Auto
Right 5sec Anynet+ ON/OFF
Power Link on or off.
Adjust the
Sound Control 5sec 7 Band EQ
sound for each frequency band.
Sound Mode 5sec Lets you apply dynamic range control
DRC ON/OFF
(Standby) to Dolby Digital tracks.

Sound Control 10sec Reset Initial Setting.

SPK add 30sec

Bluetooth off
(Main Unit)
Wi-Fi Setup 30sec
Wi-Fi off
(Main Unit)
Desensamble

a) Unfasten 25 screws on COVER-BOTTOM.

- SCREW : 6002-000126 (FH,+,-,2S,M3,L10,ZPC(BLK),SWRCH18A,-)
b) Lift and set COVER-BOTTOM vertically.
c) Disconnect CN2, CN3, CN8 and dettach the Tape in green box.
Desensamble

Combo
Module

a) Unfasten 13 screws on Main PCB and Jack ASSY.

- SCREW : 6003-001561 (BH,+,-,B,M3,L6,ZPC(WHT),SWRCH18A,RF) x 3EA
- SCREW : 6003-000276 (BH,+,-,B,M3,L10,ZPC(WHT),SWRCH18A,-) x 10EA
b) Disconnect cables from connectors (CN4, CN5)
c) Remove Main ASSY and Jack ASSY.
Desensamble

Combo
Module

a) Unfasten 2 screws on Main PCB and Combo Module.

- SCREW : 6003-001561 (BH,+,-,B,M3,L6,ZPC(WHT),SWRCH18A,RF) x 1EA
- SCREW : 6003-000276 (BH,+,-,B,M3,L10,ZPC(WHT),SWRCH18A,-) x 1EA
b) Disconnect cables from connectors (CN1, Module Connector).
c) Remove Main PCB and Combo module.
Desensamble

Combo
Module
Main Board Top

CN3 CN2
CN5 CN4
CN8
IC29

IC12 IC33

IC 4, 6, 8, 10, 13

D/L PIN SEC code FUNCTION

IC4,6,8,10,13 48 1204-003611 IC-AUDIO AMP

IC12 144 1107-002204 IC-DSP

CN8 24 3708-003266 CONNECTOR to Side Key

CN3 12 3711-006100 CONNECTOR to SPEAKER

CN2 8 3711-005941 CONNECTOR to SPEAKER

CN5 10 3711-006099 CONNECTOR to SMPS

CN4 24 3708-003266 CONNECTOR to JACK

Main Board Bottom

CN1

IC27 HCN8

IC23
IC10 HIC15 HCN7
IC25

D/L PIN SEC code FUNCTION

CN1 16 3711-009090 CONNECTOR for WIFI/BT

HCN7,8 19 3701-001967 CONNECTOR for HDMI

IC23 80 0903-002134 IC-MICOM

IC25 373 1204-003611 IC-MAIN(HAWK-A)

IC10 96 1105-002853 IC-DDR SDRAM

HIC15 128 1205-005540 IC-REPEATER

IC27 153 1107-002374 IC-EMMC

JACK

CN1
OP1
CN2

CN3

D/L PIN SEC code FUNCTION

CN2 7 3722-003216 CONNECTOR for AUX

DIC2 24 3722-004053 CONNECTOR for DEBUG

DIC3 3 3707-001105 CONNECTOR for OPTICAL

CN3 24 3708-003062 CONNECTOR to MAIN

KEY (TOP)

CN3

CN4

D/L PIN SEC code FUNCTION

CN3 24 3708-003062 CONNECTOR to Main

CN4 14 3708-003154 CONNECTOR to OLED

OLED

CN1

CN2

D/L PIN SEC code FUNCTION

CN1 14 3708-003154 CONNECTOR to KEY

CN2 14 3708-003064 CONNECTOR to OLED

SMPS

AH44-00339A
INPUT : 100-240V 50/60Hz, 1.5A
OUTPUT : 14V, DC 3.57A
MAIN PCB Bottom
MAIN PCB Bottom
MAIN PCB TOP
OLED KEY PCB Bottom
OLED KEY PCB Bottom
Input Part (HW-MS650/MS6500)
USB IN (Wireless Dongle,
for service)
Micro USB
(Wireless Dongle, for service)
Jack
Board

35
 Diagrama de bloques
Confidential

AMP 220W
E2PROM eMMC DDR3
DSP_I2S, Front MID Audio 20W
(256Kb) (4G) (512MB)
processing Front_MID L
DATA0 Digital Amp 20W
Analog 2ch
Nor UBI Amp Front_MID R
I2S SPI Flash (UB6470)
CS5343
Analog Input DSP_I2S, MID.Woofer Audio
SPI 20W
processing MID.Woofer L
I2S_BCLK DATA1 Digital Amp
Service USB2B 20W
UBI Amp
only (UB6470) MID.Woofer R
I2S_LRCLK
USB DSP_I2S, Front TW Audio 20W
USB2A TWEETER L
I2S_DATA0~5 processing
HAWK-A ADI DSP DATA3 Digital Amp
20W
USB3A ADSP-21363
UBI Amp
TWEETER R
SDP1412 UART or I2C (UB6470)
Audio 20W
DSP_I2S, TOP TOP L
SPDIF processing
20W
Digital Amp
DATA UBI Amp TOP R
I2C1
(UB6470)
I2C2
WIFI Audio
I2C3 DSP_I2S, C.MID, C.Woofer processing 20W
Center MID
Digital Amp 20W
DATA2
UBI Amp Center M.Woofer
MUX (UB6470)
UART
DS_I2S, C.TW Audio 20W
Opt Input 1 processing Center Tw
SPDIF DATA4 Digital Amp
UBI Amp
MICOM (UB6470)
ABOV
MC97F68128L
HDMI IN1 TMDS HDMI Repeater WIRELESS
EP92A6E I2S1_DATA2 WIRELESS
(4K) MODULE
HDMI IN2 TMDS Rear
Internal
CEC Rear Ready
ARC HDMI
Micom OLED
HDMI OUT
Tact Switch
SMPS
REM DATA Remocon (19V, 80W)
IR
Solución de problemas – No enciende

Plug In Power

Check if 14V is No
measured at the Replace the SMPS.
Adapter output.

Yes

Replace Main PCB.

No
Replace Main PCB again or replace
Powers On? OLED module part.

Yes

END.
Solución de problemas – Sin Audio

Plug In Power

ALL
All Speakers
Replace the Main PCB.
are No Output?

Specific

Update the main set with lastest firmware.

Specific YES
Speakers Replace the SPEAKER UNIT.
are No Output?

No

END.
Método de inicialización.

Initialization method
1. Set Power on
2. Press and hold the ‘Sound Control’ button 10sec.
3. OLED will display
4. Set will power off automatically.

INIT OK
Verificación de la versión de software

1) Connect the Power plug

2) Make it to standby mode(power off)
3) Press and hold “Sound Control” button 5 sec.
4) OLED will display
(Micom → B/E → HDMI → DSP → Set TX → Subwoofer RX → Surround)

ON
D 050

M 050
W 050

B 050
S 050

H 050
R 050
Verificación de la versión de software

Step 1 : Insert a USB drive containing the firmware upgrade into the SERVICE
port on the rear side of the SET.
Step 2 : Connect the Power plug and wait 1~2min(any source is ok)
Step 3 : After update, Set will power off automatically.

1min ~ 2min
ON UP OK
DATE
FIN