0% found this document useful (0 votes)
24 views1 page

Eie315 Tutorial Questions

eie315
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
24 views1 page

Eie315 Tutorial Questions

eie315
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EIE315 TUTORIAL QUESTIONS

1. Show that mechanical power developed in the armature of a shunt wound excited motor is
expressed Pm = Eb I a
2. Show that
  ZI a P 
i. armature torque 1, 000Ta = 159   ; and
 A 
P
ii. Shaft torque 20Tsh = 191 out N - m
N

3. A 440-V, shunt motor has armature resistance of 0.5 Ω and field resistance of 200 Ω.
Determine the back e.m.f. when given an output of 7.46kW at 80% efficiency.
4. Show that for maximum efficiency of a loaded shunt machine I Ra = Pc for both motor
2

mode and generator mode

where

I = input current

Ra = armature resistance

Pc = constant losses

State the necessary assumption.

5. A DC shunt, wave wound generator with 8poles, 880 armature conductors, runs at 650rpm supplies
a 13.5-Ω resistive load at a terminal voltage of 230-V. The generator armature and field resistance of
0.24 and 150 Ω respectively. Find the
i. Armature current,
ii. Generated e.m.f.
iii. Flux per pole.

You might also like