Scribd
Upload
21 views32 pages

Practical File

Uploaded by

msmeghuldixit19
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21 views32 pages

Practical File

Uploaded by

msmeghuldixit19
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 32

EXAMINATION ROLL NO.

- 22044570040
COLLEGE ROLL NO.- CSC/22/46
SUBJECT- COMPUTER NETWORKS
PRACTICAL FILE

PRACTICAL-1
BASIC NETWORKING COMMANDS

1. ping

2. Ping www.google.com
3. nslookup

4. hostname

5. tracert

6. Tracert www.google.com

7. netstat
8. systeminfo
9. Ipconfig
PRACTICAL-2
TO STUDY AND PERFORM PC TO PC COMMUNICATION USING ETHERNET .

STEP 1- Add 4 PCs and a hub.

STEP 2- Connect all PCs with Hub with Copper straight wire.

STEP 3- Give unique addresses to each PC.


STEP 4- Test network using ping command.

PRACTICAL-3
TO CREATE A STAR TOPOLOGY USING HUB AND SWITCH.

STEP 1- Add 6 PCs, a Hub and a Switch.

STEP 2- Connect 3 PCs with the hub and other 3 with the switch using a copper straight
wire.
STEP 3- Give unique IP address to each PC.

STEP 4- Check PDU connection in realtime and simulation between the PCs connected
to hub and switch separately.
STEP 5- Connect the hub and switch using copper-cross over wire.
STEP 6- Check PDU connection amongst PCs betwe

en PCs, hub
and the switch.
STEP 7- Test the connection using ping commands.

PRACTICAL-4
TO CREATE RING, BUS, TREE, HYBRID, MESH TOPOLOGIES.

1. RING TOPOLOGY

STEP 1- Align 4 PCs and 4 Switches in a ring.


STEP 2- Connect all with ‘Automatically choose connection type’ wire.

STEP 3- Give unique IP address to each PC.


STEP 4- Connect all PCs through PDU.

STEP 5- Test connection with ping commands.


2. BUS TOPOLOGY

STEP 1- Align 5 PCs and 5 Switches like a bus.


STEP 2- Connect all with ‘Automatically choose connection type’ wire.
STEP 3- Give unique IP address to each PC.
STEP 4- Connect all PCs through PDU.

STEP 5- Test connection with ping commands.

3. TREE TOPOLOGY

STEP 1- Align 8 PCs and 8 Switches like a tree.


STEP 2- Connect all with ‘Automatically choose connection type’ wire.
STEP 3- Give unique IP address to each PC.
STEP 4- Connect all PCs through PDU.

STEP 5- Test connection with ping commands.

4. MESH TOPOLOGY

STEP 1- Align 4 PCs and 4 Switches as shown.


STEP 2- Connect all with ‘Automatically choose connection type’ wire.
STEP 3- Give unique IP address to each PC.
STEP 4- Connect all PCs through PDU.

STEP 5- Test connection with ping commands.

5. HYBRID TOPOLOGY

STEP 1- Align 9 PCs and 4 Switches as shown below.


STEP 2- Connect all with ‘Automatically choose connection type’ wire.
STEP 3- Give unique IP address to each PC.
STEP 4- Connect all PCs through PDU.

STEP 5- Test connection with ping commands.

KRITIKA DIXIT
CSC/22/46

PRACTICAL-5
PERFORM AN INTIAL SWITCH CONFIGURATION

STEP 1- Add 1 switch from devices.

STEP 2- Change host name of switch.


STEP 3- Change message of the day and the delimiting character.
STEP 4- Change the line console password.
STEP 5- Change the secret password.
PRACTICAL6

PERFORM AN INITIAL ROUTER CONFIGURATION

1.ADD 1 ROUTER.

2.CHANGING DISPLAY NAME

3.CHANGING HOST NAME


4.ADDING MODULES( HWIC-2T)
5.INITIAL CONFIGURATION
6.POWER OFF THE DEVICE

7.ADDING ANOTHER ROUTER


REPEAT THE ABOVE STEPS .

8.CONNECTING ROUTER1 AND R USING SERIAL DTE


ROUTER R1

ROUTER R

RESULT

PRACTICAL-7
TO IMPLEMENT CLIENT SERVER NETWORK

STEP 1- Add a server, a switch and PCs as shown.


STEP 2- Connect all with automatic switch cable.
STEP 3- Config the server.
Turn on DHCP service.
IPv4 address of server on fastethernet.
Then, config the services on DHCP wherein default gateway,max users=24, start adrs=101(acc
to ip adrs) are to be saved.
Lastly write the default gateway on config settings.
STEP 4- Now config the ip address of PCs, it will notify as successful when configuration is
changed to DHCP.
STEP 5- Check the connection amongst all devices through PDU.

PRACTICAL-8
TO IMPLEMENT CONNECTION BETWEEN DEVICES USING ROUTER

STEP 1- Add 2 PCs and a Router.


STEP 2- Connect them with cross over wires

.STEP 3- Assign unique IP addresses to both the PCs.


STEP 4- Go to Router’s config and assign unqiue values in Gigabitethernet 0/0, Gigabitethernet
0/1 and RIP.
STEP 5- Connect all devices with each other with PDU.

STEP 6- Test with ping commands.

PRACTICAL-9
TO PERFORM REMOTE DESKTOP SHARING WITHIN LAN CONNECTION

STEP 1- Add a switch, server and a laptop as shown.


STEP2- Connect the switch and laptop with fastethernet while the switch and router with
gigaethernet both using copper straight through wire.
STEP 3- Config the ip address of laptop.

STEP 4- Perform commands on Router>CLI


STEP 5- Check ping and telnet commands on cmd on laptop.

You might also like