Protocol Converter Gen 2 Specification Sheet Rev 8
Protocol Converter Gen 2 Specification Sheet Rev 8
The protocol converter provides safety barrier protection for the nozzle receiver. It provides power
and converts the nozzle receiver signal to either RS232, Profinet or Profibus output
SPECIFICATION VALUE UNIT REMARKS
DESCRIPTION
Signal input
Format RS485
Sensitivity level +/- 200 mV
Baud rate 38.4 kps
Power input
Voltage (typ) 24 V
Voltage (min) 22 V
Current (typ) 130 mA Profinet is highest
Current (max) 200 mA
Absolute maximum
Power voltage in 45 V
Data voltage in +/- 5 V
Signal output-RS232
Format RS232
Voltage different level 0-6 V
Signal output-Profibus
Format Profibus,
Profinet
Voltage different level 4-7 V
Safety parameters (Uo) 7.6 V, (Io) 200 mA, (Po) 0.380 W, (Co) 10.4 µF, (Lo) 0.89 mH,
(Um) DC 24 V,
Form factor Rectangular
Length 21 Cm
Width 19 Cm
height 5 Cm
Weight 1.1 Kg
Housing material Aluminum
Operation temperature -10 to 50 C
Ingress protection IP20
Mounting DIN
Certification ATEX, NEC, KTL, TIIS,CCC; [Ex ib] IIC Gb
Output connector type- DB9F
RS232
RS232 Pin out 2 RS-232 RD
5 RS-232 Sig GND
Output connector type- DB9F
Profibus
ORDERING INFORMATION
200526 Protocol converter Gen 2 RS232-ATEX
200527 Protocol converter Gen 2 Profibus-ATEX
200577 Protocol converter Gen 2 Profinet-ATEX
200632 Protocol converter Gen 2 RS232 -NEC
200633 Protocol converter Gen 2 Profibus -NEC
200634 Protocol converter Gen 2 Profinet -NEC
200658 Protocol converter Gen 2 RS232 –KTL
200659 Protocol converter Gen 2 Profibus –KTL
200660 Protocol converter Gen 2 Profinet -KTL
200688 Protocol converter Gen 2 RS232 –TIIS
200689 Protocol converter Gen 2 Profibus –TIIS
200690 Protocol converter Gen 2 Profinet -TIIS
200807 Protocol converter Gen 2 RS232 –CCC
200808 Protocol converter Gen 2 Profibus –CCC
200809 Protocol converter Gen 2 Profinet -CCC