Download
Download
Download
This PDF package has been put together to give you options when it comes to printing. Some PDF file downloads
may contain some documents larger than an 8‐1/2” x 11” image. Pages and patterns that are larger than 8½x11
have been provided in two formats:
Full Size: If you would like to have a full size print out, take
the full size pages to your local print shop and they
can print it for you.
Tiled: The tiled pages give you the option of printing the
larger patterns at home. You print the tiled pages and then
assemble them to make the larger patterns.
Pattern PDF files are typically laid out as follows: Cover (if applicable), instructions sheets (if applicable), pattern
1 – full sized, pattern 1 – tiled, pattern 2 – full sized, pattern 2 – tiled,
pattern 3 – full sized, pattern 3 – tiled. …Etc.
Doodle Page PDF files are typically laid out as follows: Front – full sized, front – tiled, back – full sized, back –
tiled (Some Doodle Pages do not have backs).
Craftaid PDF files contain 1 (one) full Craftaid pattern or Craftaid pattern pack that has been converted into a
tracing pattern. All pages in the PDF are full sized. This means that you may have to take the PDF to a print shop
for certain oversized Craftaid patterns if your home printer cannot print the larger pages. NOTE: These digitized
patterns do not include any of the physical plastic templates (Craftaids) that may be mentioned, nor does the purchase of this PDF file
imply a promise to receive any physical plastic templates (Craftaids).
NOTE: Digital kit patterns do not include any kit parts that they may reference.
Please note: When printing on a home printer, use the settings seen on the
image to the right in the Page Handling area of the Adobe Reader print dialogue
box. If your printer is cutting edges off, set “Page Scaling” to “Shrink to
Printable Area”. This will, however, decrease the size of the pattern
a very small amount.
NOTE: Some patterns may reference tools, and other items no longer available.
NOTE: You may take this PDF file to your local print shop to have the full‐size pages printed for your own
personal use.
This premium has been published by Tandy Leather Factory, 1900 South East Loop 820, Ft. Worth, TX 76140. Copyright ©
2011 by Tandy Leather Factory, all rights reserved. The contents of this publication may not be reproduced either in whole or
in part without the consent of the copyright owner.
Please respect the copyright by not forwarding or distributing this document.
STEAMPUNK RESPIRATOR MASK
Design by George Hurst.
Pattern is reproduced at 100%.
Visit www.tandyleather.com for all the supplies
needed to complete this project.
Visit www.LeathercraftLibrary.com for more
great carving patterns.
10-1/2"
1/8" hole
1/16" hole CONNECTOR STRAP
16-1/2"
NOTE: Cut all parts from
NECK BAND
4 to 5 oz. vegetable
TABS tanned leather
Cut (4) four
1/8" holes
s
ole
8 "h
1/
HEAD BAND
CHEEK
1/8" hole
1/4" holes
1/16" hole
LEATHER
TLF_ChristmasStocking_1114 • ©2014 Tandy Leather. All rights reserved.