Scribd
Upload
4K views4 pages

Steps To Setup Mantra MFS110 (L1) Fingerprint Scanner

Uploaded by

Chendhuran Ccet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views4 pages

Steps To Setup Mantra MFS110 (L1) Fingerprint Scanner

Uploaded by

Chendhuran Ccet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Steps to setup Mantra MFS110(L1) Fingerprint Scanner

Step 1: Go to https://www.mantratec.com/Download/User

Step 2: Select MFS110(L1)

Step 3: Click driver and download

Step 4: Click RD Service and download windows version


Step 4: Go to downloads, click and install both the installers.

Step 5: Go to C: -> Program Files -> Mantra -> RDService -> MFS110

Step 6: Find config.xml right click and open properties

Step 7: Go to security tab and click edit

Step 8: Click users and tick full control, click apply and click ok
Step 9: Now open config.xml using a notepad and put PP instead of P

Step 10: Save and close the config.xml


Step 11: Plug your MFS110(L1) if not already plugged in and wait for system to detect the device.

Step 12: If it tells to unplug and plug again please do it as it guides.

Step 13: After sometimes the device will say “Framework is ready to use”.

If anything goes wrong please unplug and plug the device once.

Step 14: Wait for the prompt to close and you are ready to use the fingerprint scanner.

You might also like