KINH NGU TRANG – KINH NGU TRANG NAM

FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010

CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 2 of 15

TRACK CHANGES

No Rev. Content of Change Note

1 A Issued for Review
2 0 Issued for Approval
3 1 Issued for Approval
Updated as per Process P&IDs Rev. 1
4 2 Issued for Approval
Updated as per Process P&IDs Rev. 1
5 3 Issued for Approval
Updated as per Process P&IDs Rev. 1

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 3 of 15

FLEXIBLE HOSE INDEX

Qty. Page
No. Tag. No. NPS Line No. P&ID No. No.
(pcs)
1. KNT-SHF-1501 3/4” 1 ST-EC3-2"-1502-IH KNT-002-TS-PR1-PID-002
5
2. KNT-SHF-1502 3/4” 1 ST-EC3-2"-1503-IH KNT-002-TS-PR1-PID-002
3. KNT-SHF-7701 2” 1 FD-AC1-2"-6727-N KNT-002-TS-PR1-PID-050-SHT2 6
4. KNT-SHF-6703 1" 1 FD-AC1-2"-6735-N KNT-002-TS-PR1-PID-081-SHT1
10&11
5. KNT-SHF-5213 1” 1 WP-AS1-2”-5263-N KNT-002-TS-PR1-PID-081-SHT1
6. KNT-SHF-5314 2" 1 WS-AG1-4"-5324-N KNT-002-TS-PR1-PID-011 6
7. KNT-SHF-5315 2" 1 WS-AG1-4"-5324-N KNT-002-TS-PR1-PID-011 6
8. KNT-SHF-0301 2” 1 DH-AC1-2"-0308-IE KNT-002-TS-PR1-PID-059
9. KNT-SHF-0701 2” 1 PD-AS1-2"-0701-N KNT-002-TS-PR1-PID-060-SHT1
10. KNT-SHF-0731 2" 1 DM-AS1-2"-0751-N KNT-002-TS-PR1-PID-061-SHT1
7
11. KNT-SHF-0771 2" 1 CI-AS1-2"-0771-N KNT-002-TS-PR1-PID-062-SHT1
12. KNT-SHF-0761 2" 1 CI-AS1-2"-0761-N KNT-002-TS-PR1-PID-062-SHT1
13. KNT-SHF-0781 2" 1 MT-AS1-2"-0781-N KNT-002-TS-PR1-PID-063-SHT1
14. KNT-SHF-0501 1/2" 1 AU-AS1-1"-0512-N KNT-002-TS-PR1-PID-068
15. KNT-SHF-0502 1/2" 1 AU-AS1-1"-0511-N KNT-002-TS-PR1-PID-068
16. KNT-SHF-0503 1/2" 1 AU-AS1-1"-0519-N KNT-002-TS-PR1-PID-068
17. KNT-SHF-0504 1/2" 1 AU-AS1-1"-0509-N KNT-002-TS-PR1-PID-068
18. KNT-SHF-0505 1/2" 1 AU-AS1-1"-0508-N KNT-002-TS-PR1-PID-068
19. KNT-SHF-0506 1/2" 1 AU-AS1-1"-0520-N KNT-002-TS-PR1-PID-068
20. KNT-SHF-0507 1/2" 1 AU-AS1-1"-0506-N KNT-002-TS-PR1-PID-068
21. KNT-SHF-0508 1/2" 1 AU-AS1-1"-0521-N KNT-002-TS-PR1-PID-068
22. KNT-SHF-0509 1/2" 1 AU-AS1-1"-0522-N KNT-002-TS-PR1-PID-068
23. KNT-SHF-0510 1/2" 1 AU-AS1-1"-0505-N KNT-002-TS-PR1-PID-068
24. KNT-SHF-0511 1/2" 1 AU-AS1-1"-0503-N KNT-002-TS-PR1-PID-068
25. KNT-SHF-0512 1/2" 1 AU-AS1-1"-0502-N KNT-002-TS-PR1-PID-068
26. KNT-SHF-0513 1/2" 1 AU-AS1-1"-0523-N KNT-002-TS-PR1-PID-071 8&9
27. KNT-SHF-2601 1/2" 1 NT-AC1-2"-2638-N KNT-002-TS-PR1-PID-070
28. KNT-SHF-2602 1/2" 1 NT-AC1-2"-2639-N KNT-002-TS-PR1-PID-070
29. KNT-SHF-2603 1/2" 1 NT-AC1-2"-2640-N KNT-002-TS-PR1-PID-070
30. KNT-SHF-2604 1/2" 1 NT-AC1-2"-2641-N KNT-002-TS-PR1-PID-070
31. KNT-SHF-2605 1/2" 1 NT-AC1-2"-2642-N KNT-002-TS-PR1-PID-070
32. KNT-SHF-2606 1/2" 1 NT-AC1-2"-2643-N KNT-002-TS-PR1-PID-070
33. KNT-SHF-2607 1/2" 1 NT-AC1-2"-2644-N KNT-002-TS-PR1-PID-070
34. KNT-SHF-2608 1/2" 1 NT-AC1-2"-2645-N KNT-002-TS-PR1-PID-070
35. KNT-SHF-2609 1/2" 1 NT-AC1-2"-2646-N KNT-002-TS-PR1-PID-070
36. KNT-SHF-2610 1/2" 1 NT-AC1-2"-2647-N KNT-002-TS-PR1-PID-070
37. KNT-SHF-2611 1/2" 1 NT-AC1-2"-2648-N KNT-002-TS-PR1-PID-070
38. KNT-SHF-2612 1/2" 1 NT-AC1-2"-2649-N KNT-002-TS-PR1-PID-070

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 4 of 15

FLEXIBLE HOSE INDEX

Qty. Page
No. Tag. No. NPS Line No. P&ID No. No.
(pcs)
39. KNT-SHF-5304 1" 1 WW-AG1-1"-5341-N KNT-002-TS-PR1-PID-075
40. KNT-SHF-5312 1" 1 WW-AG1-1"-5342-N KNT-002-TS-PR1-PID-075
41. KNT-SHF-5303 1" 1 WW-AG1-1"-5347-N KNT-002-TS-PR1-PID-075
42. KNT-SHF-5309 1" 1 WW-AG1-1"-5338-N KNT-002-TS-PR1-PID-075
43. KNT-SHF-5310 1" 1 WW-AG1-1"-5339-N KNT-002-TS-PR1-PID-075
44. KNT-SHF-5311 1" 1 WW-AG1-1"-5340-N KNT-002-TS-PR1-PID-075
45. KNT-SHF-5305 1" 1 WW-AG1-1"-5335-N KNT-002-TS-PR1-PID-075
46. KNT-SHF-5306 1" 1 WW-AG1-1"-5336-N KNT-002-TS-PR1-PID-075
47. KNT-SHF-5307 1" 1 WW-AG1-1"-5337-N KNT-002-TS-PR1-PID-075
48. KNT-SHF-5302 1" 1 WW-AG1-1"-5346-N KNT-002-TS-PR1-PID-075
49. KNT-SHF-5308 1" 1 WW-AG1-1"-5334-N KNT-002-TS-PR1-PID-075
50. KNT-SHF-5301 1" 1 WW-AG1-1"-5345-N KNT-002-TS-PR1-PID-075
51. KNT-SHF-5212 1" 1 WP-AC1-1"-5240-N KNT-002-TS-PR1-PID-081-SHT1 10&11
52. KNT-SHF-5202 1" 1 WP-AC1-1"-5244-N KNT-002-TS-PR1-PID-081-SHT1
53. KNT-SHF-5201 1" 1 WP-AC1-1"-5274-N KNT-002-TS-PR1-PID-081-SHT1
54. KNT-SHF-5209 1" 1 WP-AC1-1"-5273-N KNT-002-TS-PR1-PID-081-SHT1
55. KNT-SHF-5210 1" 1 WP-AC1-1"-5238-N KNT-002-TS-PR1-PID-081-SHT1
56. KNT-SHF-5211 1" 1 WP-AC1-1"-5239-N KNT-002-TS-PR1-PID-081-SHT1
57. KNT-SHF-5205 1" 1 WP-AC1-1"-5271-N KNT-002-TS-PR1-PID-081-SHT1
58. KNT-SHF-5206 1" 1 WP-AC1-1"-5232-N KNT-002-TS-PR1-PID-081-SHT1
59. KNT-SHF-5207 1" 1 WP-AC1-1"-5272-N KNT-002-TS-PR1-PID-081-SHT1
60. KNT-SHF-5208 1" 1 WP-AC1-1"-5233-N KNT-002-TS-PR1-PID-081-SHT1
61. KNT-SHF-5203 1" 1 WP-AC1-1"-5282-N KNT-002-TS-PR1-PID-081-SHT1
62. KNT-SHF-5204 1" 1 WP-AC1-1"-5270-N KNT-002-TS-PR1-PID-081-SHT1
63. KNT-SHF-5215 1" 1 WP-AC1-2"-5275-N KNT-002-TS-PR1-PID-071
64. KNT-SHF-6130 2" 1 HO-AC2-2"-6719-N KNT-002-TS-PR1-PID-039 7
65. KNT-SHF-0514 1/2" 1 AU-AS1-1"-0514-N KNT-002-TS-PR1-PID-084
66. KNT-SHF-0515 1/2" 1 AU-AS1-1"-0515-N KNT-002-TS-PR1-PID-084 8&9
67. KNT-SHF-0516 1/2" 1 AU-AS1-1"-0516-N KNT-002-TS-PR1-PID-084
68. KNT-SHF-5216 1" 1 WP-AS1-1"-5276-N KNT-002-TS-PR1-PID-084
10&11
69. KNT-SHF-5217 1" 1 WP-AS1-1"-5231-N KNT-002-TS-PR1-PID-084

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 5 of 15

DATASHEET FOR FLEXIBLE HOSE

GENERAL
1 Tag. No. KNT-SHF-1501; KNT-SHF-1502
2 P&ID No.
Refer to page 12 of 15 to 15 of 15
3 Line No./ Equipment No.
4 Size 3/4”
5 Piping Class / Rating / CWP EC3 / 1500# / 6000 PSI (Note 8)
6 Corrosion Allowance 3.0 mm
PROCESS DATA
7 Fluid service
8 Design Pressure bar(g)
oC
9 Design Temperature
10 Operating Pressure bar(g)
oC Refer to page 12 of 15 to 15 of 15
11 Operating Temperature
12 Fluid Velocity m/sec.
13 Density kg/m³
14 Fluid Viscosity cP
DESIGN / CONSTRUCTION
Hammer Union API 7HU2, API 6A & Manufacture's Standard
15 Design Code
Flexible Hose BS EN ISO 10380 & Manufacture's Standard (Note 9)
Type Flexible Hose with 02 Hammer Unions end connections
Hammer Union includes male sub and nut with 01 cap for temporary close.
16 Male Sub shall be matched and connected / disconnected to hammer union
(KNT-SHU-1501; KNT-SHU-1502; KNT-SHU-1503; KNT-SHU-1504) (Note 6)
Flexible hose shall be minimum corrugated hose, braiding and hose protection
17 End Connection 3/4” Male Sub with Nut to threaded ACME to ASME B1.5 (Note 4)
18 Other End Connection 3/4” Male Sub with Nut to threaded ACME to ASME B1.5 (Note 4)
19 Tolerance API 7HU2/ BS EN ISO 10380 or Manufacture's Standard
20 Dimension and wall thickness API 7HU2/ BS EN ISO 10380 or Manufacture's Standard (Note 5)
21 Minimum bend radius As per Table 6 and 8 of ISO 10380
22 Marking API 7HU2/ BS EN ISO 10380 or Manufacture's Standard
23 Overall Length / Weight 15.0m / VTA (Note 5)
MATERIALS
24 Male Sub and Nut AISI 4130
25 Corrugated hose SS316
26 Braiding SS316, Double Braided
27 Flexible hose protection Anti-abrasion protective coil or synthetic rubber (VTA)
28 Cap protection AISI 4130 or Plastic with SS316 chain (VTA)
INSPECTION & TESTING (Note 3 & 9)
29 Pressure Test 100% hydrotest 1.5 times the maximum flange rating at ambient
30 Tensile test and Hardness Test Required, as per APItemperature
7HU2/ API 6A and AISI 4130
31 Heat Treatment Required, as per API 7HU2/ API 6A and AISI 4130
32 Impact Test As per API 7HU2/ API 6A and AISI 4130
33 Elongation/ Pliability/ Fatigue test Required, as per BS EN ISO 10380
34 Visual Examination 100% as per MSS SP-55 & Manufacture's Standard
35 MPI/LPI Examination 100% for Pressure containing components and weld joint
36 Radiographic/ Ultrasonic Test 100% applied for body and weld joint
37 Positive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
38 PMaterial Certification EN 10204 Type 3.1 for all components except Non-metallic type 2.2
39 Fabrication and welding As per API 7HU2/ API 6A/ BS EN ISO 10380
40 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise; TBC: To Be Confirm
1. Flexible Hose marking to be API 7HU2/ BS EN ISO 10380 or Manufacture's Standard. In additional to name plate,
VENDOR supply with a SS316 Tag. No. stamped securely fixed to the flexible hose with SS wire.
2. All welds, welding procedure qualifications, and welder qualifications shall be strictly in accordance with API 7HU2/ API
6A/ BS EN ISO 10380/ ASME B31.3 or ASME IX.
3. All inspection, testing, certificate, evaluation of conformity and general requirements shall be complied with Doc. No. KNT-
002-TS-PI1-SP-004_Specification for Piping Special Items and API 7HU2, BS EN ISO 10380, API 6A, ASTM A29/29M
4. Female sub end connections shall have groove surface roughness max 1.6 µm
5. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
6. Flexible Hose (KNT-SHF-1501; KNT-SHF-1502) and Hammer Union (KNT-SHU-1501; KNT-SHU-1502; KNT-SHU-1503;
KNT-SHU-1504) shall be supplied by same manufacturer. Refer to KNT-002-TS-PI1-DS-019_Datasheet for Hammer Union
7. VENDOR to confirm the design and material of Flexible Hose shall be covered the process condition (row No. 7 to 14)
8. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
9. Flexible hose shall be designed and burst pressure tested to comply with section 6.4 and table 1 of TCVN 6767-3: 2016
____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 6 of 15

DATASHEET FOR FLEXIBLE HOSE

GENERAL
1 Tag. No. KNT-SHF-7701; KNT-SHF-5314; KNT-SHF-5315
2 P&ID No.
Refer to page 12 of 15 to 15 of 15
3 Line No./ Equipment No.
4 Size 2”
5 Piping Class / Rating AC1 & AG1 / 150# (Note 8)
6 Corrosion Allowance 3.0 mm (for AC1); 0mm (for AG1)
PROCESS DATA
7 Fluid service Refer to page 12 of 15 to 15 of 15 (Note 7)
8 Design Pressure bar(g)
oC
9 Design Temperature
10 Operating Pressure bar(g)
oC
11 Operating Temperature Refer to page 12 of 15 to 15 of 15
12 Fluid Velocity m/sec.
13 Density kg/m³
14 Fluid Viscosity cP
DESIGN / CONSTRUCTION
15 Design Code ISO 4079/ ISO 14113, ASME B16.5 & Manufacture's Standard (Note 9)
Type
Hoses shall consist of a rubber lining that is resistant to oil or water based
hydraulic fluids or water, one or more layers of suitable textile yarn and a
16 weather and oil resistant rubber cover (Type 3TE)
Hoses shall be designed to end Flange to be assembled without removal of
the cover

17 End Connection
2" Flange, RF, 150#, SCH 40S, ASME B16.5 (Note 4)
18 Other End Connection
19 Tolerance ISO 4079/ ISO 14113, ASME B16.5 & Manufacture's Standard
20 Dimension and wall thickness ISO 4079/ ISO 14113, ASME B16.5 & Manufacture's Standard (Note 5)
21 Minimum bend radius As per Table 6 of ISO 4079
22 Marking ISO 4079/ ISO 14113, ASME B16.5 & Manufacture's Standard
23 Overall Length / Weight 6.0m / VTA (Note 5)
MATERIALS (Note 6)
24 Flange ASTM A182 Gr. F316
Synthetic rubber (hoses with one or more braid(s) of textile reinforcement),
25 Flexible hose
VTA
INSPECTION & TESTING (Note 3 & 9)
26 Pressure Test 100% hydrotest 1.5 times the maximum flange rating at ambient
27 Performance requirements Required, as temperature
per ISO 4079/ ISO 14113
28 Frequency of testing Required, as per ISO 4079/ ISO 14113
29 Visual Examination 100% as per MSS SP-55 & Manufacture's Standard
30 MPI/LPI Examination 100% for Pressure containing components and weld joint (if any)
31 Radiographic/ Ultrasonic Test 100% applied for body and weld joint (if any)
32 Positive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
33 PMaterial Certification EN 10204 Type 3.1 for all components except Non-metallic type 2.2
34 Fabrication and welding (if any) As per ISO 4079/ ISO 14113, ASME B31.3 or ASME IX
35 Painting As per KNT-002-GE-AC7-SP-002 (VTA)
NOTES
VTA: Denotes Vendor to advise; TBC: To Be Confirm
1. Flexible Hose marking to be ISO 4097/ ISO 14113, ASME B16.5 or Manufacture's Standard. In additional to name plate,
VENDOR supply with a SS316 Tag. No. stamped securely fixed to the flexible hose with SS wire.
2. All welds, welding procedure qualifications, and welder qualifications shall be strictly in accordance with ASME B31.3 or
ASME IX (if any).
3. All inspection, testing, certificate, evaluation of conformity and general requirements shall be complied with Doc. No.
KNT-002-TS-PI1-SP-004_Specification for Piping Special Items and ISO 4079/ ISO 14113
4. Raised Face (RF) flange end connections shall have surface roughness between 3.2 µm and 6.3 µm to ASME B16.5
5. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
6. VENDOR to confirm the design and material of Flexible Hose shall be covered the process condition (row No. 7 to 14)
7. Flexible Hose for different fluid service shall be provided with unique colour coding (VTA)
8. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
9. Flexible hose shall be designed and burst pressure tested to comply with section 6.4 and table 1 of TCVN 6767-3: 2016

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 7 of 15

DATASHEET FOR FLEXIBLE HOSE

GENERAL
KNT-SHF-0301; KNT-SHF-0701; KNT-SHF-0731; KNT-SHF-0771; KNT-SHF-
1 Tag. No.
0761; KNT-SHF-0781; KNT-SHF-6130
2 P&ID No.
Refer to page 12 of 15 to 15 of 15
3 Line No./ Equipment No.
4 Size 2”
5 Piping Class / Rating AC1 & AS1 / 150# (Note 10)
6 Corrosion Allowance 3.0 mm (for AC1); 0mm (for AS1)
PROCESS DATA
7 Fluid service Refer to page 12 of 15 to 15 of 15 (Note 8)
8 Design Pressure bar(g)
oC
9 Design Temperature
10 Operating Pressure bar(g)
oC
11 Operating Temperature Refer to page 12 of 15 to 15 of 15
12 Fluid Velocity m/sec.
13 Density kg/m³
14 Fluid Viscosity cP
DESIGN / CONSTRUCTION
15 Design Code (Note 11) ISO 4079/ ISO 14113, A-A-59326A/ ASTM F1122 & Manufacture's Standard
Type Hoses shall consist of a rubber lining that is resistant to oil or water based
hydraulic fluids or water, one or more layers of suitable textile yarn and a
16 weather and oil resistant rubber cover (Type 3TE)
Hoses shall be designed to end Camlock Female Adaptor to be assembled
without removal of the cover included dust plug protection with safety chain
17 End Connection 2" Camlock Female Adaptor to A-A-59326A/ ASTM F1122 (Note 4,7,9)
18 Other End Connection 2" Camlock Female Adaptor to A-A-59326A/ ASTM F1122 (Note 4,7,9)
19 Tolerance ISO 4079/ ISO 14113, A-A-59326A/ ASTM F1122 & Manufacture's Standard
20 Dimension and wall thickness (Note 5) ISO 4079/ ISO 14113, A-A-59326A/ ASTM F1122 & Manufacture's Standard
21 Minimum bend radius As per Table 6 of ISO 4079
22 Marking (Note 1, 8) ISO 4079/ ISO 14113, A-A-59326A/ ASTM F1122 & Manufacture's Standard
23 Overall Length / Weight 15.0m / VTA (Note 5)
MATERIALS (Note 6)
24 Camlock Female Adaptor SS316
25 Flexible hose Synthetic rubber (hoses with one or more braid(s) of textile reinforcement), VTA
26 Dust plug protection SS316 or Plastic with SS316 chain (VTA)
INSPECTION & TESTING (Note 3 & 11)
27 Pressure Test 100% hydrotest 1.5 times the maximum flange rating at ambient temperature
28 Performance requirements Required, as per ISO 4079/ ISO 14113
29 Frequency of testing Required, as per ISO 4079/ ISO 14113
30 Visual Examination 100% as per MSS SP-55 & Manufacture's Standard
31 MPI/LPI Examination 100% for Pressure containing components and weld joint (if any)
32 Radiographic/ Ultrasonic Test 100% applied for body and weld joint (if any)
33 Positive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
34 PMaterial Certification EN 10204 Type 3.1 for all components except Non-metallic type 2.2
35 Fabrication and welding (if any) As per ISO 4079/ ISO 14113, ASME B31.3 or ASME IX
36 Painting As per KNT-002-GE-AC7-SP-002 (VTA)
NOTES
VTA: Denotes Vendor to advise; TBC: To Be Confirm
1. Flexible Hose marking to be ISO 4097/ ISO 14113, A-A-59326A/ ASTM F1122 or Manufacture's standard. In additional
to name plate, VENDOR supply with a SS316 Tag. No. stamped securely fixed to the flexible hose with SS wire.
2. All welds, welding procedure qualifications, and welder qualifications shall be strictly in accordance with ASME B31.3 or
ASME IX (if any).
3. All inspection, testing, certificate, evaluation of conformity and general requirements shall be complied with Doc. No.
KNT-002-TS-PI1-SP-004_Specification for Piping Special Items and ISO 4079/ ISO 14113, A-A-59326A/ ASTM F1122
4. Camlock Female Adaptor end connections shall have groove surface roughness max 1.6 µm
5. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
6. VENDOR to confirm the design and material of Flexible Hose shall be covered the process condition (row No. 7 to 14)
7. Flexible Hose (KNT-SHF-0301; KNT-SHF-0701; KNT-SHF-0731; KNT-SHF-0771; KNT-SHF-0761; KNT-SHF-0781;
KNT-SHF-6130) and Hose Connection (KNT-SHC-0301; KNT-SHC-0701; KNT-SHC-0731; KNT-SHC-0771; KNT-SHC-
0761; KNT-SHC-0781; KNT-SHC-6130) shall be connected/ disconnected and supplied by same manufacturer. Refer to
KNT-002-TS-PI1-DS-012_Datasheet for Hose Connection
8. Flexible Hose for different fluid service shall be provided with unique colour coding (VTA)
9. KNT-SHF-0301 shall be matched and connected / disconnected to Transfer Pots
10. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
11. Flexible hose shall be designed and burst pressure tested to comply with section 6.4 and table 1 of TCVN 6767-3: 2016
____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 8 of 15

DATASHEET FOR FLEXIBLE HOSE

GENERAL
1 Tag. No. KNT-SHF-0501 to KNT-SHF-0516 and KNT-SHF-2601 to KNT-SHF-2612
2 P&ID No.
Refer to page 12 of 15 to 15 of 15
3 Line No./ Equipment No.
4 Size 1/2”
5 Piping Class / Rating AC1 & AS1 / 150# (Note 9)
6 Corrosion Allowance 3.0 mm (for AC1); 0mm (for AS1)
PROCESS DATA
7 Fluid service Refer to page 12 of 15 to 15 of 15 (Note 8)
8 Design Pressure bar(g)
oC
9 Design Temperature
10 Operating Pressure bar(g)
oC
11 Operating Temperature Refer to page 12 of 15 to 15 of 15
12 Fluid Velocity m/sec.
13 Density kg/m³
14 Fluid Viscosity cP
DESIGN / CONSTRUCTION
15 Design Code ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard (Note 10)
Type Hoses shall consist of a rubber lining that is resistant to oil or water based
hydraulic fluids or water, one or more layers of suitable textile yarn and a
weather and oil resistant rubber cover (Type 3TE)
Hoses shall be designed to Female Quick Coupling end and Male Quick
Coupling other end to be assembled without removal of the cover included
dust plug protection with safety chain.
A spray nozzle/ gun shall be included a flexible hose and connected/
disconnected with Male Quick Coupling of flexible hose
16

17 End connection of flexible hose 1/2" Female Quick Coupling Series B to ISO 7241 (Note 4,7)
18 Other end connection of flexible hose 1/2" Male Quick Coupling Series B to ISO 7241 (Note 4,7)
19 Inlet of spray nozzle/ gun 1/2" Female Quick Coupling Series B to ISO 7241 (Note 4,7)
20 Outlet of spray nozzle/ gun VTA
21 Tolerance ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard
22 Dimension and wall thickness ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard (Note 5)
23 Minimum bend radius As per Table 6 of ISO 4079
24 Marking (Note 1, 8) ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard
25 Overall Length / Weight 15.0m / VTA (Note 5)
MATERIALS (Note 6)
26 Male/Female Quick Coupling SS316
27 Flexible hose Synthetic rubber (hoses with one or more braid(s) of textile reinforcement), VTA
28 Spray nozzle/ gun SS316 + Plastic (VTA)
29 Dust plug protection SS316 or Plastic with SS316 chain (VTA)
INSPECTION & TESTING (Note 3 & 10)
30 Pressure Test 100% hydrotest 1.5 times the maximum flange rating at ambient temperature
31 Performance requirements Required, as per ISO 4079/ ISO 14113 and ISO 7241 series B
32 Frequency of testing Required, as per ISO 4079/ ISO 14113
33 Connect/ Disconnect force test Required, as per ISO 7241-2
34 Leak Test/ Endurance test Required, as per ISO 7241-2
35 Pressure/ Rotating impulse test Required, as per ISO 7241-2
36 Visual Examination 100% as per MSS SP-55 & Manufacture's Standard
37 MPI/LPI Examination 100% for Pressure containing components and weld joint (if any)
38 Radiographic/ Ultrasonic Test 100% applied for body and weld joint (if any)
39 Positive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
40 PMaterial Certification EN 10204 Type 3.1 for all components except Non-metallic type 2.2
41 Fabrication and welding (if any) As per ISO 4079/ ISO 14113, ISO 7241, ASME B31.3 or ASME IX
42 Painting As per KNT-002-GE-AC7-SP-002 (VTA)
NOTES
____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 9 of 15

VTA: Denotes Vendor to advise; TBC: To Be Confirm

1. Flexible Hose marking to be ISO 4097/ ISO 14113, ISO 7241 or Manufacture's standard. In additional to name plate,
VENDOR supply with a SS316 Tag. No. stamped securely fixed to the flexible hose with SS wire.
2. All welds, welding procedure qualifications, and welder qualifications shall be strictly in accordance with ASME B31.3 or
ASME IX (if any).
3. All inspection, testing, certificate, evaluation of conformity and general requirements shall be complied with Doc. No.
KNT-002-TS-PI1-SP-004_Specification for Piping Special Items and ISO 4079/ ISO 14113 and ISO 7241 & ISO 7241-2
4. Female Quick Coupling end connections shall have groove surface roughness max 1.6 µm
5. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
6. VENDOR to confirm the design and material of Flexible Hose shall be covered the process condition (row No. 7 to 14)
7. Flexible Hose (KNT-SHF-0501 to KNT-SHF-0516 and KNT-SHF-2601 to KNT-SHF-2612) and Hose Connection (KNT-
SHC-0501 to KNT-SHC-0516 and KNT-SHC-2601 to KNT-SHC-2612) shall be connected/ disconnected and supplied by
same manufacturer. Refer to KNT-002-TS-PI1-DS-012_Datasheet for Hose Connection
8. Flexible Hose for different fluid service shall be provided with unique colour coding (VTA)
9. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
10. Flexible hose shall be designed and burst pressure tested to comply with section 6.4 and table 1 of TCVN 6767-3: 2016

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 10 of 15

DATASHEET FOR FLEXIBLE HOSE

GENERAL
KNT-SHF-5201 to KNT-SHF-5213 and
1 Tag. No. KNT-SHF-5301 to KNT-SHF-5312 KNT-SHF-5215 to KNT-SHF-5217 and
KNT-SHF-6703
2 P&ID No.
Refer to page 12 of 15 to 15 of 15
3 Line No./ Equipment No.
4 Size 1”
5 Piping Class / Rating AG1 / 150# (Note 9) AC1 / AS1/ 150# (Note 9)
6 Corrosion Allowance 0mm 3.0mm (for AC1) & 0mm (for AS1)
PROCESS DATA
7 Fluid service Refer to page 12 of 15 to 15 of 15 (Note 8)
8 Design Pressure bar(g)
oC
9 Design Temperature
10 Operating Pressure bar(g)
oC
11 Operating Temperature Refer to page 12 of 15 to 15 of 15
12 Fluid Velocity m/sec.
13 Density kg/m³
14 Fluid Viscosity cP
DESIGN / CONSTRUCTION
15 Design Code ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard (Note 11)
Type Hoses shall consist of a rubber lining that is resistant to oil or water based
hydraulic fluids or water, one or more layers of suitable textile yarn and a
weather and oil resistant rubber cover (Type 3TE)
Hoses shall be designed to Female Quick Coupling end and Male Quick
Coupling other end to be assembled without removal of the cover included
dust plug protection with safety chain.
A spray nozzle/ gun shall be included a flexible hose and connected/
disconnected with Male Quick Coupling of flexible hose
16

17 End Connection 1" Female Quick Coupling Series B to ISO 7241 (Note 4,7)
18 Other End Connection 1" Male Quick Coupling Series B to ISO 7241 (Note 4,7)
19 Inlet of spray nozzle/ gun 1" Female Quick Coupling Series B to ISO 7241 (Note 4,7)
20 Outlet of spray nozzle/ gun VTA
21 Tolerance ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard
22 Dimension and wall thickness ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard (Note 5)
23 Minimum bend radius As per Table 6 of ISO 4079
24 Marking (Note 1, 8) ISO 4079/ ISO 14113, ISO 7241 & Manufacture's Standard
25 Overall Length / Weight 15.0m / VTA (Note 5)
MATERIALS (Note 6)
26 Female Quick Coupling 90/10 Cu-Ni (Note 10) SS316
27 Flexible hose Synthetic rubber (hoses with one or more braid(s) of textile reinforcement), VTA
28 Spray nozzle/ gun 90/10 Cu-Ni (Note 10) + Plastic (VTA) SS316 + Plastic (VTA)
29 Dust plug protection 90/10 Cu-Ni/ SS316 or Plastic with SS316 chain (VTA)
INSPECTION & TESTING (Note 3 & 11)
30 Pressure Test 100% hydrotest 1.5 times the maximum flange rating at ambient temperature
31 Performance requirements Required, as per ISO 4079/ ISO 14113 and ISO 7241 series B
32 Frequency of testing Required, as per ISO 4079/ ISO 14113
33 Connect/ Disconnect force test Required, as per ISO 7241-2
34 Leak Test/ Endurance test Required, as per ISO 7241-2
35 Pressure/ Rotating impulse test Required, as per ISO 7241-2
36 Visual Examination 100% as per MSS SP-55 & Manufacture's Standard
37 MPI/LPI Examination 100% for Pressure containing components and weld joint (if any)
38 Radiographic/ Ultrasonic Test 100% applied for body and weld joint (if any)
39 Positive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
40 PMaterial Certification EN 10204 Type 3.1 for all components except Non-metallic type 2.2
41 Fabrication and welding (if any) As per ISO 4079/ ISO 14113, ISO 7241, ASME B31.3 or ASME IX
42 Painting As per KNT-002-GE-AC7-SP-002 (VTA)
____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 11 of 15

NOTES
VTA: Denotes Vendor to advise; TBC: To Be Confirm
1. Flexible Hose marking to be ISO 4097/ ISO 14113, ISO 7241 or Manufacture's standard. In additional to name plate,
VENDOR supply with a SS316 Tag. No. stamped securely fixed to the flexible hose with SS wire.
2. All welds, welding procedure qualifications, and welder qualifications shall be strictly in accordance with ASME B31.3 or
ASME IX (if any).
3. All inspection, testing, certificate, evaluation of conformity and general requirements shall be complied with Doc. No.
KNT-002-TS-PI1-SP-004_Specification for Piping Special Items and ISO 4079/ ISO 14113 and ISO 7241 & ISO 7241-2
4. Female Quick Coupling end connections shall have groove surface roughness max 1.6 µm
5. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
6. VENDOR to confirm the design and material of Flexible Hose shall be covered the process condition (row No. 7 to 14)
7. Flexible Hose (KNT-SHF-5301 to KNT-SHF-5312 and KNT-SHF-5201 to KNT-SHF-5213 and KNT-SHF-5215 to KNT-
SHF-5217 and KNT-SHF-6703) and Hose Connection (KNT-SHC-5301 to KNT-SHC-5312 and KNT-SHC-5201 to KNT-
SHC-5213 and KNT-SHC-5215 to KNT-SHC-5217 and KNT-SHC-6703) shall be connected/ disconnected and supplied
by same manufacturer. Refer to KNT-002-TS-PI1-DS-012_Datasheet for Hose Connection
8. Flexible Hose for different fluid service shall be provided with unique colour coding (VTA)
9. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
10. Chemical composition and mechanical properties of 90/10 Cu-Ni shall be in accordance with table 68 of EEMUA 234
11. Flexible hose shall be designed and burst pressure tested to comply with section 6.4 and table 1 of TCVN 6767-3: 2016

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 12 of 15

PROCESS CONDITION FOR FLEXIBLE HOSE:

Design Operation
Fluid Fluid
Qty. Line No./ Density
No. Tag. No. NPS P&ID No. Fluid service Velocity Viscosity
(pcs) Equipment No. Press. Tempe. Press. Tempe. (kg/m³)
(m3/h) (cP)
bar(g) (oC) bar(g) (oC)

6000
1. KNT-SHF-1501 3/4” 1 ST-EC3-2"-1502-IH AMB/ 295
PSI/ 152 80 (min.)
KNT-002-TS-PR1-PID-002 Steam 325 (min.) VTA 110.71 0.1
barg (TBC)
2. KNT-SHF-1502 3/4” 1 ST-EC3-2"-1503-IH (TBC) (TBC)
(TBC)
KNT-002-TS-PR1-PID-050-
3. KNT-SHF-7701 2” 1 FD-AC1-2"-6727-N Fuel Diesel
SHT2 820-
10 0/65 5.168 AMB 5 3.5-4.5
KNT-002-TS-PR1-PID-081- 850
4. KNT-SHF-6703 1” 1 FD-AC1-2"-6735-N Fuel Diesel
SHT1

KNT-002-TS-PR1-PID-081- Fresh/Potable
5. KNT-SHF-5213 1” 1 WP-AS1-2”-5263-N 10 0/65 5 AMB VTA 1000 1
SHT1 Water

6. KNT-SHF-5314 2" 1 WS-AG1-4"-5324-N

KNT-002-TS-PR1-PID-008 Sea Water 16 0/65 11 AMB VTA 1021 1
7. KNT-SHF-5315 2" 1 WS-AG1-4"-5324-N

Open Haz.
8. KNT-SHF-0301 2” 1 DH-AC1-2"-0308-N KNT-002-TS-PR1-PID-059 7 0/80 3.79 AMB VTA 819 5.1
Drain
KNT-002-TS-PR1-PID-060- Pour Point
9. KNT-SHF-0701 2” 1 PD-AS1-2"-0701-N FW-0.05 0/65 ATM AMB 10 902 0.426
SHT1 Depressant

KNT-002-TS-PR1-PID-061-
10. KNT-SHF-0731 2" 1 DM-AS1-2"-0751-N Demulsifier FW-0.05 0/65 ATM AMB 10 890 4.477
SHT1

Liquid
11. KNT-SHF-0771 2" 1 CI-AS1-2"-0771-N Corrosion
KNT-002-TS-PR1-PID-062- Inhibitor
FW-0.05 0/65 ATM AMB 10 990 0.544
SHT1 Gas
12. KNT-SHF-0761 2" 1 CI-AS1-2"-0761-N Corrosion
Inhibitor

KNT-002-TS-PR1-PID-063-
13. KNT-SHF-0781 2" 1 MT-AS1-3"-0781-N Methanol 5 0/65 0.3 AMB 10 771.4 0.4506
SHT1
 KINH NGU TRANG – KINH NGU TRANG NAM FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 13 of 15

Design Operation
Fluid Fluid
Qty. Line No./ Density
No. Tag. No. NPS P&ID No. Fluid service Velocity Viscosity
(pcs) Equipment No. Press. Tempe. Press. Tempe. (kg/m³)
(m3/h) (cP)
bar(g) (oC) bar(g) (oC)

14. KNT-SHF-0501 1/2" 1 AU-AS1-1"-0512-N

15. KNT-SHF-0502 1/2" 1 AU-AS1-1"-0511-N
16. KNT-SHF-0503 1/2" 1 AU-AS1-1"-0519-N
17. KNT-SHF-0504 1/2" 1 AU-AS1-1"-0509-N
18. KNT-SHF-0505 1/2" 1 AU-AS1-1"-0508-N
19. KNT-SHF-0506 1/2" 1 AU-AS1-1"-0520-N
KNT-002-TS-PR1-PID-068
20. KNT-SHF-0507 1/2" 1 AU-AS1-1"-0506-N Utility Air 12 0/90 6 AMB-45 VTA 6.68 0.018
21. KNT-SHF-0508 1/2" 1 AU-AS1-1"-0521-N
22. KNT-SHF-0509 1/2" 1 AU-AS1-1"-0522-N
23. KNT-SHF-0510 1/2" 1 AU-AS1-1"-0505-N
24. KNT-SHF-0511 1/2" 1 AU-AS1-1"-0503-N
25. KNT-SHF-0512 1/2" 1 AU-AS1-1"-0502-N
26. KNT-SHF-0513 1/2" 1 AU-AS1-1"-0523-N KNT-002-TS-PR1-PID-071
27. KNT-SHF-2601 1/2" 1 NT-AC1-2"-2638-N
28. KNT-SHF-2602 1/2" 1 NT-AC1-2"-2639-N
29. KNT-SHF-2603 1/2" 1 NT-AC1-2"-2640-N
30. KNT-SHF-2604 1/2" 1 NT-AC1-2"-2641-N
31. KNT-SHF-2605 1/2" 1 NT-AC1-2"-2642-N
32. KNT-SHF-2606 1/2" 1 NT-AC1-2"-2643-N
KNT-002-TS-PR1-PID-070 Nitrogen 12 0/90 5 AMB VTA 5.56 0.018
33. KNT-SHF-2607 1/2" 1 NT-AC1-2"-2644-N
34. KNT-SHF-2608 1/2" 1 NT-AC1-2"-2645-N
35. KNT-SHF-2609 1/2" 1 NT-AC1-2"-2646-N
36. KNT-SHF-2610 1/2" 1 NT-AC1-2"-2647-N
37. KNT-SHF-2611 1/2" 1 NT-AC1-2"-2648-N
38. KNT-SHF-2612 1/2" 1 NT-AC1-2"-2649-N
 KINH NGU TRANG – KINH NGU TRANG NAM FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 14 of 15

Design Operation
Fluid Fluid
Qty. Line No./ Density
No. Tag. No. NPS P&ID No. Fluid service Velocity Viscosity
(pcs) Equipment No. Press. Tempe. Press. Tempe. (kg/m³)
(m3/h) (cP)
bar(g) (oC) bar(g) (oC)

39. KNT-SHF-5304 1" 1 WW-AG1-1"-5341-N

40. KNT-SHF-5312 1" 1 WW-AG1-1"-5342-N
41. KNT-SHF-5303 1" 1 WW-AG1-1"-5347-N
42. KNT-SHF-5309 1" 1 WW-AG1-1"-5338-N
43. KNT-SHF-5310 1" 1 WW-AG1-1"-5339-N
44. KNT-SHF-5311 1" 1 WW-AG1-1"-5340-N Service
KNT-002-TS-PR1-PID-075 16 0/65 7 AMB VTA 1021 1
45. KNT-SHF-5305 1" 1 WW-AG1-1"-5335-N Water
46. KNT-SHF-5306 1" 1 WW-AG1-1"-5336-N
47. KNT-SHF-5307 1" 1 WW-AG1-1"-5337-N
48. KNT-SHF-5302 1" 1 WW-AG1-1"-5346-N
49. KNT-SHF-5308 1" 1 WW-AG1-1"-5334-N
50. KNT-SHF-5301 1" 1 WW-AG1-1"-5345-N
51. KNT-SHF-5212 1" 1 WP-AC1-1"-5240-N
52. KNT-SHF-5202 1" 1 WP-AC1-1"-5244-N
53. KNT-SHF-5201 1" 1 WP-AC1-1"-5274-N
54. KNT-SHF-5209 1" 1 WP-AC1-1"-5273-N
55. KNT-SHF-5210 1" 1 WP-AC1-1"-5238-N
56. KNT-SHF-5211 1" 1 WP-AC1-1"-5239-N KNT-002-TS-PR1-PID-081-
57. KNT-SHF-5205 1" 1 WP-AC1-1"-5271-N SHT1 Fresh/Potable
10 0/65 5 AMB VTA 1000 1
Water
58. KNT-SHF-5206 1" 1 WP-AC1-1"-5232-N
59. KNT-SHF-5207 1" 1 WP-AC1-1"-5272-N
60. KNT-SHF-5208 1" 1 WP-AC1-1"-5233-N
61. KNT-SHF-5203 1" 1 WP-AC1-1"-5282-N
62. KNT-SHF-5204 1" 1 WP-AC1-1"-5270-N
63. KNT-SHF-5215 1" 1 WP-AC1-2"-5275-N KNT-002-TS-PR1-PID-071

16.3-
64. KNT-SHF-6130 2" 1 HO-AC2-2"-6179-N KNT-002-TS-PR1-PID-039 Hot Oil 10 0/250 ATM AMB VTA 881.2
41.6
 KINH NGU TRANG – KINH NGU TRANG NAM FIELD DEVELOPMENT, BLOCK 09-2/09 KNT-002-TS-PI1-DS-010
CPP KNT
DATASHEET FOR FLEXIBLE HOSE Rev. 3 Page 15 of 15

Design Operation
Fluid Fluid
Qty. Line No./ Density
No. Tag. No. NPS P&ID No. Fluid service Velocity Viscosity
(pcs) Equipment No. Press. Tempe. Press. Tempe. (kg/m³)
(m3/h) (cP)
bar(g) (oC) bar(g) (oC)

65. KNT-SHF-0514 1/2" 1 AU-AS1-1"-0514-N KNT-002-TS-PR1-PID-084

66. KNT-SHF-0515 1/2" 1 AU-AS1-1"-0515-N KNT-002-TS-PR1-PID-084 Utility Air 12 0/90 6 AMB-45 VTA 6.68 0.018
67. KNT-SHF-0516 1/2" 1 AU-AS1-1"-0516-N KNT-002-TS-PR1-PID-084
68. KNT-SHF-5216 1" 1 WP-AS1-1"-5276-N KNT-002-TS-PR1-PID-084 Fresh/Potable
10 0/65 5 AMB VTA 1000 1
69. KNT-SHF-5217 1" 1 WP-AS1-1"-5231-N KNT-002-TS-PR1-PID-084 Water