KINH NGU TRANG – KINH NGU TRANG NAM

KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 2 of 10

TRACK CHANGES

No Rev. Content of Change Note

1 A Issued for Review
2 0 Issued for Approval

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 3 of 10

CHEMICAL INJECTION INDEX

QTY. Page
No. Tag. No. NPS LINE No. P&ID No.
(PCS) No.

1. KNT-SCI-0421 1.1/2” 1 P-CC2-10"-0423-IE KNT-002-TS-PR1-PID-015 4

2. KNT-SCI-0422 1.1/2” 1 P-CC2-10"-0423-IE KNT-002-TS-PR1-PID-015 5

3. KNT-SCI-2231 1.1/2” 1 PG-DC1-4"-2260-N KNT-002-TS-PR1-PID-028 6

4. KNT-SCI-0951 1.1/2” 1 PG-DC1-4"-2261-N KNT-002-TS-PR1-PID-029 7

5. KNT-SCI-0952 1.1/2” 1 PG-DC1-4"-2261-N KNT-002-TS-PR1-PID-029 8

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 4 of 10

DATASHEET FOR CHEMICAL INJECTION (DEMULSIFIER INJECTION)

GENERAL
1 Tag. No. KNT-SCI-0421
2 P&ID No. KNT-002-TS-PR1-PID-015
3 Line No./ Equipment No. P-CC2-10"-0423-IE
4 Header size 10” SCH 80 (O.D = 273.05 mm ; ID = 242.87 mm)
5 Piping Class / Rating CC2 / 600# (Note 8)
6 Corrosion Allowance 4.0 mm
7 Insulation Yes, 25mm THK (Supply by other) (Note 7)
PROCESS DATA
8 Fluid service Demulsifier Injection Process Liquid
9 Design Pressure bar(g) 60 60
oC
10 Design Temperature 0/65 -29/120
11 Operating Pressure bar(g) 46.89 18.7/44.8
oC
12 Operating Temperature AMB 85
13 Fluid Velocity m/sec. 0.061 9.29
14 Density kg/m³ 890 774.88 - 908.11
15 Normal Capacity m³/hr 0.01871 48.91 - 219.57
16 Fluid Viscosity cP 4.477 0.54 - 9.24
DESIGN / CONSTRUCTION
17 Design Code ASME B31.3; ASME B16.5/ B16.34; API 14E & Manufacturer's Standard
Type: Check Ball Ball Quill
1.1/2”x1/2” Double Block and Bleed Valve (Ball x Ball x Needle) one piece
18 body with integral quill and key block check valve assembly (check valve
Needle
integral with body); Ball shall be Full Bore to BS EN ISO 17292 or API 6D
19 End Connection 1.1/2” Flange, RF, 600#, SCH 160, ASME B16.5 (Note 5)
20 Other end connection 1/2” FNPT combined with hexagon plug, ASME B1.20.1
21 Bleed end 1/2” FNPT combined with hexagon plug, ASME B1.20.1
22 Injection Quill 1/2” Perpendicular to flow quill with 45-degree angle cut
23 Quill Length 265mm, VTA (Note 4, 6)
24 Fire Safe Design API 6FA, API 6FD, API 607, BS 6755 part 2 or ISO 10497
25 Overall Dimension / Weight VTA (Note 6)
MATERIALS (Note 2)
26 Body ASTM A182 F316
27 Ball, Needle, Disc SS 316 as per MSS SP-55
28 Seat, Packing, O-ring PTFE or PEEK or Flexible Graphite (VTA)
29 Quill, Spring SS 316
30 Bolts / Nuts ASTM A320 Gr.B8M/ A194 Gr.8M Xylan Fluorocarbon Coated
INSPECTION & TESTING (Note 3)
31 Pressure Test 100% as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
32 Visual Examination 100%
33 MPI/LPI Examination 100% for Pressure containing components as per KNT-002-TS-PI1-SP-002
34 Radiographic Test Required, as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
35 PPositive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
36 Site Testing Required, as per KNT-002-TS-PI1-SP-002
37 Material Certification EN 10204 Type 3.1 for Pressure containing components Type 2.2 for others
38 Fire Safe Certificate Required, as per KNT-002-TS-PI1-SP-002
39 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise
1. Chemical Injection marking to be to MSS SP-25. In additional to name plate, VENDOR supply with a SS316 Tag. No.
stamped securely fixed to the Chemical Injection with SS wire. Body to be clearly marked with an arrow indicated
direction flow.
2. VENDOR to confirm material suitable for the fluid at design process data.
3. All inspection, testing, certificate, and general requirements shall be complied with Doc. No. KNT-002-TS-PI1-SP-
002_Specification for Manual Valves and KNT-002-TS-PI1-SP-004_Specification for Piping Special Items.
4. Quill length to middle header pipe (refer typical drawing on page 9 of 10), VENDOR to calculate and advise design of
injection quill shall be such that it does not vibrate and chatter in service condition.
5. Raised Face (RF) flange end connections shall have surface roughness between 3.2 µm and 6.3 µm to ASME B16.5
6. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
7. VENDOR to confirm stem length to suitable with insulation thickness
8. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification
____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 5 of 10

DATASHEET FOR CHEMICAL INJECTION (CORROSION INHIBITOR INJECTION)

GENERAL
1 Tag. No. KNT-SCI-0422
2 P&ID No. KNT-002-TS-PR1-PID-015
3 Line No./ Equipment No. P-CC2-10"-0423-IE
4 Header size 10” SCH 80 (O.D = 273.05 mm ; ID = 242.87 mm)
5 Piping Class / Rating CC2 / 600# (Note 8)
6 Corrosion Allowance 4.0 mm
7 Insulation Yes, 25mm THK (Supply by other) (Note 7)
PROCESS DATA
8 Fluid service Corrosion Inhibitor Injection Process Liquid
9 Design Pressure bar(g) 60 60
oC
10 Design Temperature 0/65 -29/120
11 Operating Pressure bar(g) 46.89 46.89
o
12 Operating Temperature C AMB 85
13 Fluid Velocity m/sec. 0.0224 9.29
14 Density kg/m³ 990 774.88 - 908.11
15 Normal Capacity m³/hr 0.006874 48.91 - 219.57
16 Fluid Viscosity cP 0.544 0.54 - 9.24
DESIGN / CONSTRUCTION
17 Design Code ASME B31.3; ASME B16.5/ B16.34; API 14E & Manufacturer's Standard
Type: Check Ball Ball Quill
1.1/2”x1/2” Double Block and Bleed Valve (Ball x Ball x Needle) one piece
18 body with integral quill and key block check valve assembly (check valve
Needle
integral with body); Ball shall be Full Bore to BS EN ISO 17292 or API 6D
19 End Connection 1.1/2” Flange, RF, 600#, SCH 160, ASME B16.5 (Note 5)
20 Other end connection 1/2” FNPT combined with hexagon plug, ASME B1.20.1
21 Bleed end 1/2” FNPT combined with hexagon plug, ASME B1.20.1
22 Injection Quill 1/2” Perpendicular to flow quill with 45-degree angle cut
23 Quill Length 265mm, VTA (Note 4, 6)
24 Fire Safe Design API 6FA, API 6FD, API 607, BS 6755 part 2 or ISO 10497
25 Overall Dimension / Weight VTA (Note 6)
MATERIALS (Note 2)
26 Body ASTM A182 F316
27 Ball, Needle, Disc SS 316
28 Seat, Packing, O-ring PTFE or PEEK or Flexible Graphite (VTA)
29 Quill, Spring SS 316
30 Bolts / Nuts ASTM A320 Gr.B8M/ A194 Gr.8M Xylan Fluorocarbon Coated
INSPECTION & TESTING (Note 3)
31 Pressure Test 100% as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
32 Visual Examination 100% as per MSS SP-55
33 MPI/LPI Examination 100% for Pressure containing components as per KNT-002-TS-PI1-SP-002
34 Radiographic Test Required, as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
35 PPositive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
36 Site Testing Required, as per KNT-002-TS-PI1-SP-002
37 Material Certification EN 10204 Type 3.1 for Pressure containing components Type 2.2 for others
38 Fire Safe Certificate Required, as per KNT-002-TS-PI1-SP-002
39 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise
1. Chemical Injection marking to be to MSS SP-25. In additional to name plate, VENDOR supply with a SS316 Tag. No.
stamped securely fixed to the Chemical Injection with SS wire. Body to be clearly marked with an arrow indicated
direction flow.
2. VENDOR to confirm material suitable for the fluid at design process data.
3. All inspection, testing, certificate, and general requirements shall be complied with Doc. No. KNT-002-TS-PI1-SP-
002_Specification for Manual Valves and KNT-002-TS-PI1-SP-004_Specification for Piping Special Items.
4. Quill length to middle header pipe (refer typical drawing on page 9 of 10), VENDOR to calculate and advise design of
injection quill shall be such that it does not vibrate and chatter in service condition.
5. Raised Face (RF) flange end connections shall have surface roughness between 3.2 µm and 6.3 µm to ASME B16.5.
6. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
7. VENDOR to confirm stem length to suitable with insulation thickness
8. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 6 of 10

DATASHEET FOR CHEMICAL INJECTION (METHANOL INJECTION)

GENERAL
1 Tag. No. KNT-SCI-2231
2 P&ID No. KNT-002-TS-PR1-PID-028
3 Line No./ Equipment No. PG-DC1-4"-2260-N
4 Header size 4” SCH 120 (O.D = 114.30 mm ; ID = 92.04 mm)
5 Piping Class / Rating DC1 / 900# (Note 7)
6 Corrosion Allowance 3.0 mm
PROCESS DATA
7 Fluid service Methanol Injection Process Gas
8 Design Pressure bar(g) 130 130
oC
9 Design Temperature 0/65 -29/80
10 Operating Pressure bar(g) 117.8 109.5
oC
11 Operating Temperature AMB 45
12 Fluid Velocity m/sec. 0.1141 -
13 Density kg/m³ 771.4 135.1 - 141.88
14 Normal Capacity m³/hr 0.035 131156.11 - 538377.88
15 Fluid Viscosity cP 0.451 0.018
DESIGN / CONSTRUCTION
16 Design Code ASME B31.3; ASME B16.5/ B16.34; API 14E & Manufacturer's Standard
Type: Check Ball Ball Quill
1.1/2”x1/2” Double Block and Bleed Valve (Ball x Ball x Needle) one piece
17 body with integral quill and key block check valve assembly (check valve
Needle
integral with body); Ball shall be Full Bore to BS EN ISO 17292 or API 6D
18 End Connection 1.1/2” Flange, RTJ, 1500#, SCH 160, ASME B16.5 (Note 5)
19 Other end connection 1/2” FNPT combined with hexagon plug, ASME B1.20.1
20 Bleed end 1/2” FNPT combined with hexagon plug, ASME B1.20.1
21 Injection Quill 1/2” Perpendicular to flow quill with spray nozzle
22 Quill Length 198mm, VTA (Note 4, 6)
23 Fire Safe Design API 6FA, API 6FD, API 607, BS 6755 part 2 or ISO 10497
24 Overall Dimension / Weight VTA (Note 6)
MATERIALS (Note 2)
25 Body ASTM A182 F316
26 Ball, Needle, Disc SS 316
27 Seat, Packing, O-ring PCTFE or PEEK or Flexible Graphite (VTA)
28 Quill, Spring SS 316
29 Bolts / Nuts ASTM A320 Gr.B8M/ A194 Gr.8M Xylan Fluorocarbon Coated
INSPECTION & TESTING (Note 3)
30 Pressure Test 100% as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
31 Visual Examination 100% as per MSS SP-55
32 MPI/LPI Examination 100% for Pressure containing components as per KNT-002-TS-PI1-SP-002
33 Radiographic Test Required, as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
34 PPositive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
35 Hardness Test Required (Note 5)
36 Site Testing Required, as per KNT-002-TS-PI1-SP-002
37 Material Certification EN 10204 Type 3.1 for Pressure containing components Type 2.2 for others
38 Fire Safe Certificate Required, as per KNT-002-TS-PI1-SP-002
39 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise
1. Chemical Injection marking to be to MSS SP-25. In additional to name plate, VENDOR supply with a SS316 Tag. No.
stamped securely fixed to the Chemical Injection with SS wire. Body to be clearly marked with an arrow indicated
direction flow.
2. VENDOR to confirm material suitable for the fluid at design process data.
3. All inspection, testing, certificate, and general requirements shall be complied with Doc. No. KNT-002-TS-PI1-SP-
002_Specification for Manual Valves and KNT-002-TS-PI1-SP-004_Specification for Piping Special Items.
4. Quill length to middle header pipe (refer typical drawing on page 10 of 10), VENDOR to calculate and advise design of
injection quill shall be such that it does not vibrate and chatter in service condition.
5. Ring Type Joint (RTJ) flange end connections shall have groove surface roughness max 1.6 µm in accordance with
ASME B16.5. And minimum 190 BHN.
6. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
7. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 7 of 10

DATASHEET FOR CHEMICAL INJECTION (CORROSION INHIBITOR INJECTION)

GENERAL
1 Tag. No. KNT-SCI-0951
2 P&ID No. KNT-002-TS-PR1-PID-029
3 Line No./ Equipment No. PG-DC1-4"-2261-N
4 Header size 4” SCH 120 (O.D = 114.30 mm ; ID = 92.04 mm)
5 Piping Class / Rating DC1 / 900# (Note 7)
6 Corrosion Allowance 3.0 mm
PROCESS DATA
7 Fluid service Corrosion Inhibitor Injection Process Gas
8 Design Pressure bar(g) 130 130
oC
9 Design Temperature 0/65 -29/80
10 Operating Pressure bar(g) 117.9 109.3
oC
11 Operating Temperature AMB 45
12 Fluid Velocity m/sec. 0.002 -
13 Density kg/m³ 990 134.73 - 141.49
14 Normal Capacity m³/hr 0.000625 35155.91 - 248377.68 (Sm3/d)
15 Fluid Viscosity cP 0.544 0.018
DESIGN / CONSTRUCTION
16 Design Code ASME B31.3; ASME B16.5/ B16.34; API 14E & Manufacturer's Standard
Type: Check Ball Ball Quill
1.1/2”x1/2” Double Block and Bleed Valve (Ball x Ball x Needle) one piece
17 body with integral quill and key block check valve assembly (check valve
Needle
integral with body); Ball shall be Full Bore to BS EN ISO 17292 or API 6D
18 End Connection 1.1/2” Flange, RTJ, 1500#, SCH 160, ASME B16.5 (Note 5)
19 Other end connection 1/2” FNPT combined with hexagon plug, ASME B1.20.1
20 Bleed end 1/2” FNPT combined with hexagon plug, ASME B1.20.1
21 Injection Quill 1/2” Perpendicular to flow quill with spray nozzle
22 Quill Length 198mm, VTA (Note 4, 6)
23 Fire Safe Design API 6FA, API 6FD, API 607, BS 6755 part 2 or ISO 10497
24 Overall Dimension / Weight VTA (Note 6)
MATERIALS (Note 2)
25 Body ASTM A182 F316
26 Ball, Needle, Disc SS 316
27 Seat, Packing, O-ring PCTFE or PEEK or Flexible Graphite (VTA)
28 Quill, Spring SS 316
29 Bolts / Nuts ASTM A320 Gr.B8M/ A194 Gr.8M Xylan Fluorocarbon Coated
INSPECTION & TESTING (Note 3)
30 Pressure Test 100% as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
31 Visual Examination 100% as per MSS SP-55
32 MPI/LPI Examination 100% for Pressure containing components as per KNT-002-TS-PI1-SP-002
33 Radiographic Test Required, as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
34 PPositive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
35 Hardness Test Required (Note 5)
36 Site Testing Required, as per KNT-002-TS-PI1-SP-002
37 Material Certification EN 10204 Type 3.1 for Pressure containing components Type 2.2 for others
38 Fire Safe Certificate Required, as per KNT-002-TS-PI1-SP-002
39 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise
1. Chemical Injection marking to be to MSS SP-25. In additional to name plate, VENDOR supply with a SS316 Tag. No.
stamped securely fixed to the Chemical Injection with SS wire. Body to be clearly marked with an arrow indicated
direction flow.
2. VENDOR to confirm material suitable for the fluid at design process data.
3. All inspection, testing, certificate, and general requirements shall be complied with Doc. No. KNT-002-TS-PI1-SP-
002_Specification for Manual Valves and KNT-002-TS-PI1-SP-004_Specification for Piping Special Items.
4. Quill length to middle header pipe (refer typical drawing on page 10 of 10), VENDOR to calculate and advise design of
injection quill shall be such that it does not vibrate and chatter in service condition.
5. Ring Type Joint (RTJ) flange end connections shall have groove surface roughness max 1.6 µm in accordance with
ASME B16.5. And minimum 190 BHN.
6. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
7. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 8 of 10

DATASHEET FOR CHEMICAL INJECTION (METHANOL INJECTION)

GENERAL
1 Tag. No. KNT-SCI-0952
2 P&ID No. KNT-002-TS-PR1-PID-029
3 Line No./ Equipment No. PG-DC1-4"-2261-N
4 Header size 4” SCH 120 (O.D = 114.30 mm ; ID = 92.04 mm)
5 Piping Class / Rating DC1 / 900# (Note 7)
6 Corrosion Allowance 3.0 mm
PROCESS DATA
7 Fluid service Methanol Injection Process Gas
8 Design Pressure bar(g) 130 130
oC
9 Design Temperature 0/65 -29/80
10 Operating Pressure bar(g) 117.8 109.3
oC
11 Operating Temperature AMB 45
12 Fluid Velocity m/sec. 0.1141 -
13 Density kg/m³ 771.4 134.73 - 141.49
14 Normal Capacity m³/hr 0.035 35155.91 - 248377.68 (Sm3/d)
15 Fluid Viscosity cP 0.451 0.018
DESIGN / CONSTRUCTION
16 Design Code ASME B31.3; ASME B16.5/ B16.34; API 14E & Manufacturer's Standard
Type: Check Ball Ball Quill
1.1/2”x1/2” Double Block and Bleed Valve (Ball x Ball x Needle) one piece
17 body with integral quill and key block check valve assembly (check valve
Needle
integral with body); Ball shall be Full Bore to BS EN ISO 17292 or API 6D
18 End Connection 1.1/2” Flange, RTJ, 1500#, SCH 160, ASME B16.5 (Note 5)
19 Other end connection 1/2” FNPT combined with hexagon plug, ASME B1.20.1
20 Bleed end 1/2” FNPT combined with hexagon plug, ASME B1.20.1
21 Injection Quill 1/2” Perpendicular to flow quill with spray nozzle
22 Quill Length 198mm, VTA (Note 4, 6)
23 Fire Safe Design API 6FA, API 6FD, API 607, BS 6755 part 2 or ISO 10497
24 Overall Dimension / Weight VTA (Note 6)
MATERIALS (Note 2)
25 Body ASTM A182 F316
26 Ball, Needle, Disc SS 316
27 Seat, Packing, O-ring PCTFE or PEEK or Flexible Graphite (VTA)
28 Quill, Spring SS 316
29 Bolts / Nuts ASTM A320 Gr.B8M/ A194 Gr.8M Xylan Fluorocarbon Coated
INSPECTION & TESTING (Note 3)
30 Pressure Test 100% as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
31 Visual Examination 100% as per MSS SP-55
32 MPI/LPI Examination 100% for Pressure containing components as per KNT-002-TS-PI1-SP-002
33 Radiographic Test Required, as per KNT-002-TS-PI1-SP-002 (for DBB and check valve)
34 PPositive Material Identification 100% for Stainless steel and Corrosion Resistance Alloy steel components
35 Hardness Test Required (Note 5)
36 Site Testing Required, as per KNT-002-TS-PI1-SP-002
37 Material Certification EN 10204 Type 3.1 for Pressure containing components Type 2.2 for others
38 Fire Safe Certificate Required, as per KNT-002-TS-PI1-SP-002
39 Painting As per KNT-002-GE-AC7-SP-002
NOTES
VTA: Denotes Vendor to advise
1. Chemical Injection marking to be to MSS SP-25. In additional to name plate, VENDOR supply with a SS316 Tag. No.
stamped securely fixed to the Chemical Injection with SS wire. Body to be clearly marked with an arrow indicated
direction flow.
2. VENDOR to confirm material suitable for the fluid at design process data.
3. All inspection, testing, certificate, and general requirements shall be complied with Doc. No. KNT-002-TS-PI1-SP-
002_Specification for Manual Valves and KNT-002-TS-PI1-SP-004_Specification for Piping Special Items.
4. Quill length to middle header pipe (refer typical drawing on page 10 of 10), VENDOR to calculate and advise design of
injection quill shall be such that it does not vibrate and chatter in service condition.
5. Ring Type Joint (RTJ) flange end connections shall have groove surface roughness max 1.6 µm in accordance with
ASME B16.5. And minimum 190 BHN.
6. VENDOR shall furnish detail cross section, assemblies’ drawings with fully dimensions and weight.
7. Refer to Doc. No. KNT-002-TS-PI1-SP-001_Piping Material Class Specification

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 9 of 10

TYPICAL SKETCH FOR REFERENCE:

1. CHEMICAL INJECTION: KNT-SCI-0421; KNT-SCI-0422

Description KNT-SCI-0421; KNT-SCI-0422

Piping Class/ Rating CC2/600#
Flange end (Size/Face) 1.1/2”/RF
Internal Diameter of Nozzle (mm) 34
Injection Quill Length (mm) 265

____________________________________________________________________________________
 KINH NGU TRANG – KINH NGU TRANG NAM
KNT-002-TS-PI1-DS-013
FIELD DEVELOPMENT, BLOCK 09-2/09
CPP KNT
DATASHEET FOR CHEMICAL INJECTION Rev. 0 Page 10 of 10

TYPICAL SKETCH FOR REFERENCE:

2. CHEMICAL INJECTION: KNT-SCI-2231; KNT-SCI-0951; KNT-SCI-0952

Description KNT-SCI-2231; KNT-SCI-0951; KNT-SCI-0952

Piping Class/ Rating DC1/1500#
Flange end (Size/Face) 1.1/2”/RTJ
Internal Diameter of Nozzle (mm) 34
Injection Quill Length (mm) 198

____________________________________________________________________________________