1z0-447.exam.

42q

Number: 1z0-447
Passing Score: 800
Time Limit: 120 min
File Version: 1

Oracle 1z0-447

https://www.gratisexam.com/

Oracle GoldenGate 12c Implementation Essentials

https://www.gratisexam.com/
Exam A

QUESTION 1
Your Goldengate deployment is using a shared wallet, and older versions of the master key should be retained after the master key is renewed until all processes
are using the newest version.

How should you determine whether all of the processes are using the newest version so that you can delete older versions of the master key?

https://www.gratisexam.com

A. GoldenGate deployments cannot use a shared wallet.

B. View the GoldenGate log files to monitor Replicat report files to verify that the SCN was applied by all Replicat groups.
C. View the report file of the newest Extract after renewing the master key to confirm the last SCN that was mined with old key.
D. View the report file of each Extract immediately after renewing the master key to confirm the last SCN that was mined with the old key. Then, monitor the
Replicat report files to verify that this SCN was applied by all Replicat groups.

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/ggsci_commands042.htm#GWURF945 (see note)

QUESTION 2
What is the function of the GoldenGate JAgent?

A. It performs connections via JDBC to run the Veridata comparisons.

B. It enables communication between GoldenGate and Monitor, and Enterprise Manager Agent.
C. It reads the database transaction logs.
D. It integrates GoldenGate with Oracle Data Integrator.

Correct Answer: B
Section: (none)
Explanation

https://www.gratisexam.com/
Explanation/Reference:

QUESTION 3
What software is required prior to running Oracle GoldenGate in a Windows Server environment?

A. Oracle Gateway software configured for that particular database platform

B. JDBC drivers into the GoldenGate home directory
C. Microsoft Visual C++ 2010 SP1 Redistributable Package
D. Nothing, configure GoldenGate Jagent for that particular database platform.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GIMSS/system_requirements.htm#GIMSS182

QUESTION 4
Which statement is valid for DDL replication?

A. GoldenGate User Exits are not supported for DDL.

B. Source and target objects can be different.
C. Target objects can be different from source when using SOURCEDEFS in Replicat.
D. It can use WILDCARDRESOLVE IMMEDIATE.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 5
You installed GoldenGate on your server, but you received an error when you tried to start GGSCI. What is the reason for this issue?

A. The incorrect version of GoldenGate was installed for your CPU architecture.
B. A license key must be applied first.
C. GoldenGate Manager was not started first.

https://www.gratisexam.com/
D. The LD_LIBRARY_PATH variable to $ORACLE_HOME was not set.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 6
Identify the correct statement regarding Trails.

https://www.gratisexam.com

A. Extract and Pump are different OS level executable binary files.

B. Extracts cannot perform filtering, mapping, and transformations.
C. RMTTRAIL is for remote trails and EXTTRAIL is for local trails.
D. Extract is typically used to produce local trail files over a TCP/IP connection.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 7
Replicat makes checkpoints in the trail file to mark its last read position. Select two ways to create checkpoint tables.

A. Run the chkpt_db_extracttrail.sql script.

B. Run the chkpt_db_create.sql script.
C. Use the ADD Extract Trail command.
D. Use the INFO REPLICAT command with the SHOWCH option.
E. Use the ADD CHECKPOINTTABLE command.

https://www.gratisexam.com/
Correct Answer: BE
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_ogg_checkpts.htm#GWUAD972

QUESTION 8
You want to generate an extract file or trail in a non-GoldenGate canonical format like those used in the Initial Load file-to–database utility. How should you
configure GoldenGate in order to accomplish this?

A. Configure Replicat with the FORMATASCII SQLLOADER OPTION.

B. Configure Extract with the FORMATSQL SQLLOADER OPTION.
C. Configure Extract with the FORMATASCII SQLLOADER OPTION.
D. Configure Replicat with the FORMATXML OPTION.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_initsync.htm#GWUAD546

QUESTION 9
Your Extract process, which is using an Oracle database, has stopped with uncommitted transactions. How should you guarantee an efficient recovery after Extract
has stopped?

A. Use the FORCETRANS and PURGEORPHANEDTRANSACTIONS parameters to control the bounded recovery feature of the general Extract checkpointing facility.
B. Use the WARNLONGTRANS parameter to control the bounded recovery feature of the general Extract checkpointing facility.
C. Use the BR parameter to control the bounded recovery feature of the general Extract checkpointing facility.
D. Use the PURGEORPHANEDTRANSACTIONS parameter to control the bounded recovery feature of the general Extract checkpointing facility.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: http://www.oracle.com/technetwork/database/features/availability/maa-goldengate-rac-2007111.pdf

https://www.gratisexam.com/
QUESTION 10
Which database setting for the Oracle 11.2.0.4 database is required to enable Oracle GoldenGate?

A. ENABLE_GOLDENGATE_REPLICATION=true
B. ENABLE_STREAMS_REPLICATION=true
C. Configure the STREAMS_POOL_SIZE database parameter
D. ENABLE_DATABASE_REPLICATION=true

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/setup.htm#GIORA983

QUESTION 11
How should you configure Replicat to control how errors are handled in one-way replication?

A. Use REPERROR in the Replicat parameter file.

https://www.gratisexam.com

B. Use HANDLECOLLISION in the Replicat parameter file.

C. Use Conflict Detection and Resolution in the Replicat parameter file.
D. Use MAPEXCEPTION in the Replicat parameter file.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_errorhandling.htm#GWUAD502

QUESTION 12

https://www.gratisexam.com/
You must implement GoldenGate in a master-to-master configuration. What output from the profiling scripts should you look for to ensure that your implementation
is correct?

A. Tables set with nologging

B. Tables with Large Object (LOB) data types
C. Tables that have conflicts
D. Triggers and sequences

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 13
If multiple GoldenGate processes are accessing a set of trail files, which process should include the PURGEOLDEXTRACTS parameter to trigger trail file clean-up?

A. Manager
B. Replicat
C. Extract
D. Extract and Replicat

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters123.htm#GWURF1025

QUESTION 14
What is the key purpose of GoldenGate trail files?

A. They are a persistent storage area for captured transactions.

B. They are configuration files for the GoldenGate processes.
C. They are checkpoint files for the GoldenGate processes.
D. They are database auditing logs where GoldenGate captures changes.

https://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 15
You need to look up table definitions in a file. Which Replicat parameter should you use?

A. ASSUMETARGETDEFS
B. COLMATCH
C. SOURCEDEFS
D. MAP

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 16
You want to increase parallelism for greater integrated Replicat throughput while preserving the original transaction atomicity. How can you achieve this?

A. You can configure integrated Replicat with two parallel apply servers.
B. You can configure integrated Replicat with two parallel child servers.
C. You can configure integrated Replicat with the SPECIALRUN parameter.
D. You can configure integrated Replicat with ASSUMETARGETDEFS and SPECIALRUN parameters.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/process_mode.htm#GIORA219

QUESTION 17
Which statement regarding the GoldenGate Data Pump is incorrect?

https://www.gratisexam.com/
 https://www.gratisexam.com

A. Data Pump is a separate process.

B. Data Pump can be used to pump trail records to multiple locations.
C. Data Pump has distance limitations.
D. Data Pump uses TCP/IP to route the trail records.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 18
Identify two correct statements regarding GoldenGate supported features.

A. GoldenGate supports network encryption and compression.

B. GoldenGate supports DML and DDL replication for all supported databases.
C. GoldenGate for Oracle supports Exadata Hybrid Columnar Compression as a source.
D. GoldenGate for SQLServer supports only SQLServer Standard Edition as a source.

Correct Answer: AC
Section: (none)
Explanation

Explanation/Reference:

QUESTION 19
You must configure GoldenGate parameter files for conflict resolution and want to be sure that the before values are compared with current values in the target
database to detect update and delete conflicts.

How should you accomplish this?

https://www.gratisexam.com/
A. Use the COMPCOLS with the GETUPDATEBEFORES option of the MAP parameter in the Replicat parameter file to specify columns that are to be used with before
values in the Replicat WHERE clause.
B. Use the COMPARECOLS option of the MAP parameter in the Replicat parameter file to specify columns that are to be used with before values in the Replicat
WHERE clause.
C. Use the GETUPDATEBEFORES option of the MAP parameter in the Replicat parameter file to specify columns that are to be used with before values in the
Replicat WHERE clause.
D. Use the GETBEFORECOLS option of the MAP parameter in the Replicat parameter file to specify columns that are to be used with before values in the Replicat
WHERE clause.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/conflict_resolution.htm#GWUAD317

QUESTION 20
You must synchronize tables with Large Object data types. Which Initial Load method supports this process?

A. File to Replicat
B. GoldenGate Direct Load
C. File to database utility
D. Direct bulk load to SQL*Loader

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 21
You are implementing GoldenGate monitoring via the Enterprise Manager Plug-In. When you start JAgent, it fails with “ajava.lang.Exception: One or more Java
Agent properties in Config.properties are not defined properly”.

What is the first thing to check?

A. if The Enterprise Manager Agent is running

https://www.gratisexam.com/
B. if the JAgent has been enabled in the GoldenGate Manager
C. if the agent type is set to OEM in JAgent properties
D. if the Oracle Wallet has been created for the JAgent

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:

QUESTION 22
Which three are valid Extract or Replicat statements using the @RANGE function for an Acct table with a Primary Key on the AccountID column? (Select three.)

A. MAP sales.acct, TARGET sales.acct, FILTER (@RANGE (2, 3, AccountID));

B. MAP sales.acct, TARGET sales.acct, FILTER (@RANGE (1, 3, ID));
C. TABLE fin.Sales, FILTER (@RANGE (1, 2));
D. FILTER (@RANGE (2, 2, AccountID));
E. FILTER (@RANGE 2, 2, ID);

Correct Answer: ABC

Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/column_conversion_functions022.htm#GWURF809

QUESTION 23
Which parameter for GoldenGate 12c enables DDL replication for a Replicat?

A. TARGETDDL
B. GETDDL
C. DDL for Replicat is enabled by default.
D. USEDDL

Correct Answer: C
Section: (none)
Explanation

https://www.gratisexam.com/
Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/c1230/gg-winux/GGHDB/using-ddl-replication.htm#GGHDB-GUID-C80382D7-A0D6-4C89-BAC8-B03023F9A313

QUESTION 24
Which Logdump command is used to check how many change records are in the trail file?

A. STATS
B. REPORT
C. REPORTCOUNT
D. COUNT

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GLOGD/wu_logdump.htm#GLOGD121

QUESTION 25
Veridata has completed the initial comparison and you want to view the rows that appear to be out-of-sync. How can you do this?

https://www.gratisexam.com

A. View the maybe out-of-sync (MOOS) queue.

B. View the Veridata log file.
C. View the confirm-out-of-sync (COOS) queue.
D. View the Veridata Agent repository.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/v1221/gg-veridata/GVDUG/get_started.htm#GVDUG107

https://www.gratisexam.com/
QUESTION 26
You need to locate the position of the oldest unprocessed transaction by using the command INFO EXTRACT <extractgroup> SHOWCH. How should you
proceed?

A. Use the Read Startup Checkpoint.

B. Use the Read Recovery Checkpoint.
C. Use the Write Startup Checkpoint.
D. Use the Read Current Checkpoint.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_ogg_checkpts.htm#GWUAD968

QUESTION 27
For which database, other than SQL Server, does an Extract use a method of Secondary Truncation Point management?

A. Teradata
B. Informix
C. Sybase
D. DB2

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:

QUESTION 28
Select four Oracle GoldenGate use cases.

A. real-time discovery
B. real-time data warehousing
C. offload reporting

https://www.gratisexam.com/
D. zero downtime upgrades and migrations
E. backup and recovery
F. data center load balancing by using multi-master replication

Correct Answer: BCDF

Section: (none)
Explanation

Explanation/Reference:

QUESTION 29
You want to eliminate the reporting output from processing a Macro. How should you proceed?

A. Use the optional parameter NOLIST.

B. Use the optional parameter UNLIST.
C. Use the optional parameter NOREPORT.
D. Use the optional parameter NOMACROOUTPUT.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: http://www.ateam-oracle.com/oracle-goldengate-using-macros/

QUESTION 30
You have configured and added the Extract and Replicat tasks by using the Direct Load method. What do you need to do to get the processes up and running?

A. Start the Extract task.

B. Start the Extract task, wait for it to stop, and then start the Replicat task.
C. Start the Extract task and then start the Replicat task.
D. Start the Replicat task.

Correct Answer: C
Section: (none)
Explanation

https://www.gratisexam.com/
Explanation/Reference:

QUESTION 31
Which method in GoldenGate should you use to undo DML changes previously made to a target database?

https://www.gratisexam.com

A. Run Extract and Replicat from the command line.

B. Use Extract and Replicat with the GoldenGate Logdump utility.
C. Run the Reverse Utility on the target database transaction logs.
D. Use Extract and Replicat with the GoldenGate Reverse utility.

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/wu_backout.htm#GWUAD721

QUESTION 32
Which two are valid macros?

A.

https://www.gratisexam.com/
B.

C.

D.

Correct Answer: AD
Section: (none)
Explanation

Explanation/Reference:

QUESTION 33
In which process should you configure the warning for long-running transactions?

A. Jagent
B. Extract
C. Replicat
D. Manager

Correct Answer: B

https://www.gratisexam.com/
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters015.htm#GWURF410

QUESTION 34
How can you tell if GoldenGate has been configured for batch processing?

A. The SPECIALRUN parameter is in the Replicat parameter file.

B. Replicat is started with the INITIALLOAD task.
C. There is a dedicated GoldenGate process called SPECIALRUN.
D. The SPECIALRUN parameter is in the GLOBALS parameter file.

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 35
You need to configure the source database, target database, and Oracle GoldenGate for conflict detection and resolution (CDR). You want the full before image of
each record, but your database does not provide a before image in the log record and must be configured to do so with supplemental logging.

How should you proceed?

A. Include the OVERWRITE command.

B. Include the USEDELTA command.
C. Include the ADD TRANDATA command.
D. Include the UPDATAROWEXISTS command.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWUAD/conflict_resolution.htm#GWUAD316

https://www.gratisexam.com/
QUESTION 36
Which is an incorrect syntax for connecting to a source or target database by an Extract or Replicat?

A. TARGETDB TargetDSN USERID sampleID PASSWORD samplepword

B. SOURCEDB SourceDSN
C. SOURCEDB sampleDB USERID sampleID PASSWORD samplepword
D. TARGETDB sampleID samplepword

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:

QUESTION 37
Your GLOBALS file contains the parameter SYSLOG NONE, but the system logs contain warnings from the Manager. What could be causing this to occur?

https://www.gratisexam.com

A. The GGSCI session was configured incorrectly.

B. The Manager parameter file contains SYSLOG ALL.
C. An Extract or Replicat is overriding GLOBALS with SYSLOG WARN.
D. The user session running Manager is set to log all messages.

Correct Answer: C
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters159.htm#GWURF668

QUESTION 38
Which replication topology requires conflict resolution?

https://www.gratisexam.com/
A. Broadcast
B. Consolidation
C. Master-to-Master
D. Cascading

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 39
You must prepare the source database to send redo to the mining database. What sequence of steps should you follow to accomplish this?

A. Ensure that the source database is running with the required compatibility. Use the TRANSLOGOPTIONS parameter, set up redo transport at the source
database, and enable the downstream destination.
B. Ensure that the source database is running with the required compatibility. Set DB_CONFIG at the source database. Set up redo transport at the source
database.
C. Set DG_CONFIG at the source database and enable the downstream destination.
D. Ensure that the source database is running with the required compatibility. Set DG_CONFIG at the source database. Set up redo transport at the source
database and enable the downstream destination.

Correct Answer: D
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/c1221/gg-winux/GIORA/GUID-CFE66D1B-A010-44A7-94FB-0CC70CEBB8D1.htm#GIORA505 (C.3.4)

QUESTION 40
Which option is not included as part of a Veridata installation?

A. Veridata BackPlane Server

B. Veridata Agent
C. Veridata Web Server
D. Veridata Repository

https://www.gratisexam.com/
Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/v12212/gg-veridata/GVDIS/GVDIS.pdf

QUESTION 41
An integrated Replicat is running with PARALLELISM set to four, yet you discover that for a series of large operations, only one apply server is processing the
operations. What is the reason for this issue?

A. Operations are grouped into one apply server automatically based on GROUPTRANSOPS.
B. Parallelism for an Integrated Replicat cannot exceed one.
C. The operations for a particular table are pinned to a specific apply server.
D. The operations are all part of one transaction.

Correct Answer: A
Section: (none)
Explanation

Explanation/Reference:

QUESTION 42
With BATCHSQL enabled, what causes a Replicat to use normal mode operation?

A. statements with rows between 8k and 24k in length

B. when BATCHSQL and GROUPTRANSOPS coexist
C. statements which cause errors
D. when server memory < 8GB

Correct Answer: B
Section: (none)
Explanation

Explanation/Reference:
Reference: https://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters011.htm#GWURF404

https://www.gratisexam.com/
 https://www.gratisexam.com

https://www.gratisexam.com/