// This code is created by algopoint.

All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]

//@version=5
indicator('AlgoPoint | Reversal Finder', overlay=true, precision = 0, linktoseries
= true, max_bars_back = 1000, max_lines_count = 500, max_labels_count=500)

aisensitivitysetter = input.int(defval=2, minval=1, maxval = 6, step = 1,

title="Contrarian Sensitivity | 1-6", group="Contrarıan Sıgnals")
Strengthfilter = input.int(defval=0, minval=0, maxval = 5, step = 1,
title="Strength Filter | 1-5", group="Contrarıan Sıgnals") -0.1
stability = aisensitivitysetter == 1 ? 0.4 : aisensitivitysetter == 2 ? 0.5 :
aisensitivitysetter == 3 ? 0.6 : aisensitivitysetter == 4 ? 0.7 :
aisensitivitysetter == 5 ? 0.8 : aisensitivitysetter == 6 ? 0.9 : 1
rsiindex = 50
candledelta = 5

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]

//
stable_candle = math.abs(close - open) / ta.tr > stability
rsi = ta.rsi(close, 14)

bullish_engulfing = close[1] < open[1] and close > open and close > open[1]
rsi_below_50 = rsi < rsiindex
decrease_over_5 = close < close[candledelta]

bull = bullish_engulfing and stable_candle and rsi_below_50 and decrease_over_5

bearish_engulfing = close[1] > open[1] and close < open and close < open[1]
rsi_above_50 = rsi > rsiindex
increase_over_5 = close > close[candledelta]

bear = bearish_engulfing and stable_candle and rsi_above_50 and increase_over_5

lblsz = 'tiny'
sizy = lblsz == 'tiny' ? size.tiny : lblsz == 'small' ? size.small : lblsz ==
'normal' ? size.normal : lblsz == 'large' ? size.large : lblsz == 'huge' ?
size.huge : na

labystyly = 'text bubble'

labelystylybear = labystyly == 'text bubble' ? label.style_label_down : labystyly
== 'triangle' ? label.style_triangledown : labystyly == 'arrow' ?
label.style_arrowdown : na
labelystylybear1 = labystyly == 'text bubble' ? label.style_label_up : labystyly ==
'triangle' ? label.style_triangleup : labystyly == 'arrow' ? label.style_arrowup :
na

buylbl = #898d94
selllbl = #089981
txtcl = #ffffff

//=============================================================================
// INDICATOR 11 - Trend Confidence
//============================================================================

// CCI

TM_Long = ta.cci(close, 20) < -140

TM_Short = ta.cci(close, 20) > 140

//color1 = ta.cci(close, 5) >= 0 ? #0022FC : #FC0400

//plot(MagicTrend, color=color1, linewidth=3)

// ADX
lenadx = 14
lensig = 14
limadx = 18

ADX_up = ta.change(high)
ADX_down = -ta.change(low)
trur = ta.rma(ta.tr, lenadx)
plus = fixnan(100 * ta.rma(ADX_up > ADX_down and ADX_up > 0 ? ADX_up : 0, lenadx) /
trur)
minus = fixnan(100 * ta.rma(ADX_down > ADX_up and ADX_down > 0 ? ADX_down : 0,
lenadx) / trur)
sum = plus + minus
adx = 100 * ta.rma(math.abs(plus - minus) / (sum == 0 ? 1 : sum), lensig)

macol = adx > limadx and plus > minus ? #898d94 : adx > limadx and plus < minus ?
#089981 : color.black

ADX_Long = adx > limadx and plus > minus

ADX_Short = adx > limadx and plus < minus

//Acumulation/Distribution
RSI_Dist = ta.rsi(close, 14)

ACC_Long = RSI_Dist < 40

ACC_Short = RSI_Dist > 60

// MFI

MFI = ta.mfi(close , 14)

MFI_SMA = ta.sma (MFI, 9)
MFI_Long = MFI < 40
MFI_Short = MFI > 60

// Relative Volatility Index

lengthrvi = 10
srcrvi = close
lenrvi = 14
stddev = ta.stdev(srcrvi, lengthrvi)
upperrvi = ta.ema(ta.change(srcrvi) <= 0 ? 0 : stddev, lenrvi)
lowerrvi = ta.ema(ta.change(srcrvi) > 0 ? 0 : stddev, lenrvi)
rvi = upperrvi / (upperrvi + lowerrvi) * 100

MOML_Long = rvi < 40

MOML_Short = rvi > 60
//
entry_long = true
entry_short = true

Long_Signal_Strength = 0
Short_Signal_Strength = 0

if entry_long
if TM_Long
Long_Signal_Strength += 1
if ADX_Long
Long_Signal_Strength += 1
if ACC_Long
Long_Signal_Strength += 1
if MFI_Long
Long_Signal_Strength += 1
if MOML_Long
Long_Signal_Strength += 1

if entry_short
if TM_Short
Short_Signal_Strength += 1
if ADX_Short
Short_Signal_Strength += 1
if ACC_Short
Short_Signal_Strength += 1
if MFI_Short
Short_Signal_Strength += 1
if MOML_Short
Short_Signal_Strength += 1
//Plot Buy/Sell Signals on chart

enter_Long_Text = "Buy " + str.tostring(Long_Signal_Strength)

enter_Short_Text = "Sell " + str.tostring(Short_Signal_Strength)

frost = bull and Long_Signal_Strength >= Strengthfilter ? label.new(bar_index ,

low, enter_Long_Text, color=buylbl, style=labelystylybear1, textcolor=txtcl,
size=sizy) : na
frost1 = bear and Short_Signal_Strength >= Strengthfilter ? label.new(bar_index ,
high, enter_Short_Text, color=selllbl, style=labelystylybear, textcolor=txtcl,
size=sizy) : na

// Support Resistance
///////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////
//

Showasdas = input.bool(true, 'Supply & Demand Blocks', group='Supply & Demand',

inline='Supply Demand 2')
ShowSD2 = false
ShowSZ2 = Showasdas == true ? true : false
ShowRZ2 = Showasdas == true ? true : false

RSI2Length = input.int(14, minval=1, title='Senstivity', group='Supply & Demand',

inline = 'af1')
RSI2OBOSIn = '70 / 30'
NumberOfConfirmationBarsRSI2 = input.int(3, title='Confirmation', group='Supply &
Demand', inline = 'af1')

RSI2SDColorIn = color.new(color.purple, 85)

RSI2SupportColorIn = color.new(#898d94, 88)
RSI2ResistanceColorIn = color.new(#089981, 88)

RSI2 = ta.rsi(close, RSI2Length)

RSI2OB = RSI2OBOSIn == '70 / 30' ? 70 : RSI2OBOSIn == '75 / 25' ? 75 : RSI2OBOSIn

== '80 / 20' ? 80 : RSI2OBOSIn == '90 / 10' ? 90 : RSI2OBOSIn == '95 / 5' ? 95 :
100
RSI2OS = RSI2OBOSIn == '70 / 30' ? 30 : RSI2OBOSIn == '75 / 25' ? 25 : RSI2OBOSIn
== '80 / 20' ? 20 : RSI2OBOSIn == '90 / 10' ? 10 : RSI2OBOSIn == '95 / 5' ? 5 : 0

RSI2incrementer_up = RSI2 > RSI2OB ? 1 : 0

RSI2incrementer_down = RSI2 < RSI2OS ? 1 : 0
RSI2incrementer_both = RSI2 > RSI2OB or RSI2 < RSI2OS ? 1 : 0

RSI2rsx = 0

if RSI2incrementer_both
RSI2rsx := nz(RSI2rsx[1], 0) + RSI2incrementer_both
RSI2rsx
else
RSI2rsx = 0
RSI2rsx

RSI2rxH = if RSI2rsx >= NumberOfConfirmationBarsRSI2

RSI2x = high
RSI2x
RSI2rxL = if RSI2rsx >= NumberOfConfirmationBarsRSI2
RSI2y = low
RSI2y

RSI2rH = fixnan(RSI2rxH)
RSI2rL = fixnan(RSI2rxL)

///////////////////////////////////////////////////////
RSI2rsu = 0

if RSI2incrementer_up
RSI2rsu := nz(RSI2rsu[1], 0) + RSI2incrementer_up
RSI2rsu
else
RSI2rsu = 0
RSI2rsu

RSI2rssH = if RSI2rsu >= NumberOfConfirmationBarsRSI2

RSI2x = high
RSI2x

RSI2rssL = if RSI2rsu >= NumberOfConfirmationBarsRSI2

RSI2y = low
RSI2y

RSI2ResistanceZoneHigh = fixnan(RSI2rssH)
RSI2ResistanceZoneLow = fixnan(RSI2rssL)

////////////////////////////////////////////////////////

RSI2rsd = 0

if RSI2incrementer_down
RSI2rsd := nz(RSI2rsd[1], 0) + RSI2incrementer_down
RSI2rsd
else
RSI2rsd = 0
RSI2rsd

RSI2rsrH = if RSI2rsd >= NumberOfConfirmationBarsRSI2

RSI2x = high
RSI2x

RSI2rsrL = if RSI2rsd >= NumberOfConfirmationBarsRSI2

RSI2y = low
RSI2y

RSI2SupportZoneHigh = fixnan(RSI2rsrH)
RSI2SupportZoneLow = fixnan(RSI2rsrL)

////////////////////////////////////////////////////////

RSI2_ResZoneColor = RSI2ResistanceZoneHigh != RSI2ResistanceZoneHigh[1] ? na :

RSI2ResistanceColorIn
RSI2_SupZoneColor = RSI2SupportZoneLow != RSI2SupportZoneLow[1] ? na :
RSI2SupportColorIn

RSI2SDColor = RSI2rH != RSI2rH[1] ? na : RSI2SDColorIn

////////////////////////////////////////////////////////

RSI2RZHigh = plot(ShowRZ2 ? RSI2ResistanceZoneHigh : na, style=plot.style_cross,

title='Resistance Zone - 2 - High', transp=100)
RSI2RZLow = plot(ShowRZ2 ? RSI2ResistanceZoneLow : na, style=plot.style_cross,
title='Resistance Zone - 2 - Low', transp=100)
fill(RSI2RZHigh, RSI2RZLow, color=RSI2_ResZoneColor, title='Support Zone - 2 -
Fill', transp=90)

RSI2SZHigh = plot(ShowSZ2 ? RSI2SupportZoneHigh : na, style=plot.style_cross,

title='Support Zone - 2 - High', transp=100)
RSI2SZLow = plot(ShowSZ2 ? RSI2SupportZoneLow : na, style=plot.style_cross,
title='Support Zone - 2 - Low', transp=100)
fill(RSI2SZHigh, RSI2SZLow, color=RSI2_SupZoneColor, title='Support Zone - 2 -
Fill', transp=90)

PlotRSI2rH = plot(ShowSD2 ? RSI2rH : na, style=plot.style_cross, linewidth=1,

title='Supply Demand - 2 - High')
PlotRSI2rL = plot(ShowSD2 ? RSI2rL : na, style=plot.style_cross, linewidth=1,
title='Supply Demand - 2 - Low')
fill(PlotRSI2rH, PlotRSI2rL, color=RSI2SDColor, title='Supply Demand - 2 - Fill',
transp=90)

// Order Blocks Settings

show_order_blocks=input.bool(true,"Order Blocks", inline = "ob1", group = 'Order
Blocks')
ibull_ob_css = input.color(#898d9419, '', inline = 'ob1', group = 'Order Blocks')
ibear_ob_css = input.color(#08998119, '', inline = 'ob1', group = 'Order Blocks')
mode = input.bool(true, 'Auto-Optimizer |', group='Order Blocks', inline =
'Autohtd')
HTF_manual = input.timeframe('Chart', title='Timeframe', group='Order Blocks',
inline = 'Autohtd')

//auto higher time frame

HTF_auto = timeframe.period == '1' ? '15' :
timeframe.period == '2' ? '15' :
timeframe.period == '3' ? '30' :
timeframe.period == '5' ? '30' :
timeframe.period == '15' ? '45' :
timeframe.period == '30' ? '120' :
timeframe.period == '45' ? '180' :
timeframe.period == '60' ? '240' :
timeframe.period == '120' ? '480' :
timeframe.period == '180' ? '720' :
timeframe.period == '240' ? 'D' :
timeframe.period == '360' ? 'D' :
timeframe.period == '480' ? '2D' :
timeframe.period == '720' ? '3D' :
timeframe.period == 'D' ? '3D' :
timeframe.period == '3D' ? 'W' : ''

//
i_tf_ob = mode == true ? HTF_auto : HTF_manual

// Dashboard
bullish = #898d94
bearish = #089981
// Dashboard
gr_dashboard = "DASHBOARD SETTINGS"
showDash = input(true, "Dashboard", group = gr_dashboard)
dashLoc = input.string('Bottom Right', 'Location', options = ['Top Right', 'Bottom
Right', 'Bottom Left'], group = gr_dashboard)
textSize = input.string('Normal', 'Size', options = ['Tiny', 'Small', 'Normal'],
group = gr_dashboard)
// # ========================================================================= #
// DASHBOARD
// # ========================================================================= #
// Predicted Reversal
predictedreversal = Long_Signal_Strength > Short_Signal_Strength ? 0 :
Short_Signal_Strength > Long_Signal_Strength ? 1 : Short_Signal_Strength ==
Long_Signal_Strength ? 2 : na
predictedtext = predictedreversal == 0 ? '▲' : predictedreversal == 1 ? '▼' :
predictedreversal == 2 ? 'Undetected' : 'Undetected'
predictedtextcolor = predictedtext == '▲' ? #898d94 : predictedtext == '▼' ?
#089981 : color.white
predictedtext2 = Long_Signal_Strength > Short_Signal_Strength ?
Long_Signal_Strength : Short_Signal_Strength > Long_Signal_Strength ?
Short_Signal_Strength : na
//Short_Signal_Strength
//Long_Signal_Strength

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
// Trend Strength Function
rsilength = 14
overboughtlevel = 70
oversoldlevel = 30

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
rsiValue = ta.rsi(close, rsilength)

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
trendStrength = rsiValue > overboughtlevel ? 100 : rsiValue < oversoldlevel ? 0 :
((rsiValue - oversoldlevel) / (overboughtlevel - oversoldlevel)) * 100

isTrending = trendStrength > 50

trendStrengthPercentage = math.round(trendStrength, 2)
 ❄️
trendIndication = isTrending ? "" : " "
trendemote = isTrending ? "🐮" : "🐻"
trendtext = isTrending ? "Bullish" : "Bearish"
textColorstrength = trendStrengthPercentage < 50 ? bearish : bullish

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
// Volume Function
vollength = 20
buyThreshold = 0.7
sellThreshold = -0.7

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
volumeRatio = volume / ta.sma(volume, vollength)

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
volumeSentiment = (math.min(math.max(volumeRatio - 0.5, -0.5), 0.5) * 200)

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
isBuySentiment = volumeSentiment > buyThreshold
isSellSentiment = volumeSentiment < sellThreshold
textcolorvolu = isBuySentiment ? bullish : bearish

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
// Volatility Function
volatilength = 20
lowVolatilityThreshold = 0.5
highVolatilityThreshold = 1.5

Volatility = ta.atr(1) / ta.atr(volatilength)

isRisingVolatility = Volatility > ta.sma(Volatility, volatilength)
isFallingVolatility = Volatility < ta.sma(Volatility, volatilength)

isLowVolatility = Volatility < lowVolatilityThreshold

isHighVolatility = Volatility > highVolatilityThreshold

volatilityPercentage = math.min(Volatility * 100, 100)

volatilityIndication = isRisingVolatility ? "📈" : isFallingVolatility ? "📉" : ""
volatilitycolor = isHighVolatility ? bearish : bullish

// Drawing Dashboard
var table_position = dashLoc == 'Bottom Left' ? position.bottom_left
: dashLoc == 'Top Right' ? position.top_right
: position.bottom_right

var table_size = textSize == 'Tiny' ? size.tiny

: textSize == 'Small' ? size.small
: size.normal

var tb = table.new(table_position, 8, 8
, bgcolor = #1e222d
, border_color = #373a46
, border_width = 1
, frame_color = #373a46
, frame_width = 1)

if showDash
if barstate.isfirst
tb.cell(0, 0, "AlgoPoint | Reversal Finder", text_color = color.white,
text_size = table_size)
tb.merge_cells(0,0,1,0)

if barstate.islast
tb.cell(0, 3, str.tostring(trendIndication) + "Trend Strenght", text_color
= color.white, text_size = table_size, text_halign = text.align_left)
tb.cell(0, 4, "💠 Volume", text_color = color.white, text_size = table_size,
text_halign = text.align_left)
tb.cell(0, 5, str.tostring(volatilityIndication) + " Volatility",
text_color = color.white, text_size = table_size, text_halign = text.align_left)
tb.cell(0, 6, str.tostring(trendemote) + " Trend", text_color =
color.white, text_size = table_size, text_halign = text.align_left)
tb.cell(1, 3, str.tostring(trendStrengthPercentage, format.percent),
text_color=textColorstrength, text_size=table_size)
tb.cell(1, 4, str.tostring(volumeSentiment, format.percent), text_color =
textcolorvolu, text_size = table_size)
tb.cell(1, 5, str.tostring(volatilityPercentage, format.percent),
text_color=volatilitycolor, text_size=table_size)
tb.cell(1, 6, str.tostring(trendtext), text_color = textColorstrength,
text_size = table_size)
tb.cell(0, 7, 'Predicted Reversal', text_color = color.white, text_size =
table_size, text_halign = text.align_left)
tb.cell(1, 7, str.tostring(predictedtext) + ' | ' +
str.tostring(predictedtext2), text_color = predictedtextcolor, text_size =
table_size)

// Smart Money Concepts

//----------------------------------------}
//Order Blocks
//----------------------------------------{

v_buy = #898d944d
v_sell = #71ad724d

timeframe1=' : '
show_iob = 'All'=='All' or 'All'=='Internal' //input(true, 'Internal', inline =
'ob', group = 'Order Blocks')
show_ob = 'All'=='All' or 'All'=='External' //input(false, 'External', inline =
'ob', group = 'Order Blocks')
ob_showlast = 5//input.int(10, 'LookBack', minval = 1, inline = 'ob', group =
'Order Blocks')
iob_showlast = 5//input.int(5, 'LookBack', minval = 1, inline = 'iob', group =
'Order Blocks')

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
style = 'Colored'
v_lookback= 10
ob_loockback=10
timediff=(time[1]-time[101])/100

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
//----------------------------------------}
//Liquidity Levels
//----------------------------------------{

currentTF = false
htfTF = ""
_highLineStyleHTF = "Solid"//input.string("Solid", title = "Line Style",
options=["Solid", "Dashed", "Dotted"], group=liquidity_level_group,inline='5')
highLineStyleHTF = _highLineStyleHTF=="Solid" ? line.style_solid :
_highLineStyleHTF=="Dashed" ? line.style_dashed : line.style_dotted
box_width = 2.5//input.float(3.0, title = "Width",
group=liquidity_level_group,inline='5', minval = 1, maxval = 10, step = 0.5)
lineWidthHTF=2
lowLineColorHTF = #00bbf94d
highLineColorHTF = #e91e624d
highBoxBorderColorHTF = color.new(highLineColorHTF,90)
lowBoxBorderColorHTF = color.new(lowLineColorHTF,90)
displayStyle_liq = "Boxes"//'Lines'

//----------------------------------------}
//Fair Value Gaps (FVG
//----------------------------------------{

show_fvg = false
i_tf = ""
i_mtfbearishfvgcolor = #ffffff20
i_mtfbullishfvgcolor = #ffffff20

// This code is created by algopoint. All other leaked algos is available at

algopoint.mysellix.io
// AlgoPoint Official Contact Adrress
// Instagram: algopoint
// Instagram: algopoint01
// Website: algopoint.mysellix.io
// Mail: [email protected]
i_bullishfvgcolor = color.new(color.green,100)
i_bearishfvgcolor = color.new(color.green,90)
i_fillByMid = true
i_deleteonfill = true
i_textColor = color.white
i_mtf = "HTF"
i_tfos = 10
i_mtfos = 50

//----------------------------------------}
//BOS and ChoCH
//----------------------------------------{

// Constants
color CLEAR = color.rgb(0,0,0,100)

// Inputs
showms=false
bosColor1 = #787b86
bosColor2 = #787b86
swingSize = 3

//-----------------------------------------------------------------------------}
//Global variables
//-----------------------------------------------------------------------------{
color transparent = #ffffff00
length = 50
is_newbar(res) =>
t = time(res)
not na(t) and (na(t[1]) or t > t[1])

Show_MS(x, y, txt, css, dashed, down, lbl_size)=>

label.new(int(math.avg(x, bar_index)), y, txt, color = transparent, textcolor =
css, style = down ? label.style_label_down : label.style_label_up, size = lbl_size)
line.new(x, y, bar_index, y, color = css, style = dashed ? line.style_dashed :
line.style_solid)

f_barssince(_cond, _count) =>

_barssince = bar_index - ta.valuewhen(_cond, bar_index, _count)
_barssince

//Swings detection/measurements
calculate_swing_points(length)=>
var prev = 0
prev := high[length] > ta.highest(length) ? 0 : low[length] < ta.lowest(length)
? 1 : prev[1]
t = prev == 0 and prev[1] != 0 ? high[length] : 0
b = prev == 1 and prev[1] != 1 ? low[length] : 0
 [t, b]

var t_MS = 0, var int_t_MS = 0

var internal_y_up = 0., var internal_x_up = 0, var internal_y_dn = 0., var
internal_x_dn = 0
var y_up = 0., var x_up = 0 , var y_dn = 0., var x_dn = 0
var crossed_up = true, var crossed_down = true
var internal_up_broke = true, var internal_dn_broke = true
var up_trailing = high, var down_trailing = low
var up_trailing_x = 0, var down_trailing_x = 0
var high_text = '', var low_text = ''
bullish_OB_Break = false
bearish_OB_Break = false

//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------
//--------------------------------------------------------------- Market
Structure
//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------

bosConfType = 'Candle High'//input.string('Candle Close', 'BOS Confirmation',

['Candle Close', 'Wicks'], tooltip='Choose whether candle close/wick above previous
swing point counts as a BOS.')
ChoCH = true//input.bool(false, 'Show ChoCH', tooltip='Renames the first counter
t_MS BOS to ChoCH' )
// showSwing = false//input.bool(true, 'Show Swing Points', tooltip='Show or hide
HH, LH, HL, LL')

// Functions
lineStyle(x) =>
switch x
'Solid' => line.style_solid
'Dashed' => line.style_dashed
'Dotted' => line.style_dotted
pivot_high_found = ta.pivothigh(high, 10, 10)
pivot_low_found = ta.pivotlow(low, 10, 10)

var float prevHigh_s = na,var float prevLow_s = na,var int prevHighIndex_s = na,var
int prevLowIndex_s = na
bool higher_highs = false, bool lower_highs = false, bool higher_lows = false, bool
lower_lows = false

var int prevSwing_s = 0

if not na(pivot_high_found)
if pivot_high_found >= prevHigh_s
higher_highs := true
prevSwing_s := 2
else
lower_highs := true
prevSwing_s := 1
prevHigh_s := pivot_high_found
prevHighIndex_s := bar_index - 10
if not na(pivot_low_found)
if pivot_low_found >= prevLow_s
higher_lows := true
prevSwing_s := -1
else
lower_lows := true
prevSwing_s := -2
prevLow_s := pivot_low_found
prevLowIndex_s := bar_index - 10

//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------
//--------------------------------------------------------------- Fair Value
Gaps
//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------

// }

// ———————————————————— Global data {

//Using current bar data for HTF highs and lows instead of security to prevent
future leaking
var htfH = open
var htfL = open

if close > htfH

htfH:= close
if close < htfL
htfL := close

//Security Data, used for HTF Bar Data reference

sClose = request.security(ticker.standard(syminfo.tickerid), i_tf, close[1],

barmerge.gaps_off, barmerge.lookahead_on)
sHighP2 = request.security(ticker.standard(syminfo.tickerid), i_tf, high[2],
barmerge.gaps_off, barmerge.lookahead_on)
sLowP2 = request.security(ticker.standard(syminfo.tickerid), i_tf, low[2],
barmerge.gaps_off, barmerge.lookahead_on)
sOpen = request.security(ticker.standard(syminfo.tickerid), i_tf, open[1],
barmerge.gaps_off, barmerge.lookahead_on)
sBar = request.security(ticker.standard(syminfo.tickerid), i_tf, bar_index,
barmerge.gaps_off, barmerge.lookahead_on)

// }

//var keyword can be used to hold data in memory, with pinescript all data is lost
including variables unless the var keyword is used to preserve this data
var bullishgapholder = array.new_box(0)
var bearishgapholder = array.new_box(0)

var bullishgapholder_fill = array.new_box(0)

var bearishgapholder_fill = array.new_box(0)
var bullish_high_holder = array.new_line(0)
var bearish_high_holder = array.new_line(0)
var bullish_low_holder = array.new_line(0)
var bearish_low_holder = array.new_line(0)
var bullishmidholder = array.new_line(0)
var bearishmidholder = array.new_line(0)
var bullishlabelholder = array.new_label(0)
var bearishlabelholder = array.new_label(0)
var transparentcolor = color.new(color.white,100)

var fvg_apper=false
var fvg_break=false

fvg_apper:=false
fvg_break:=false
// ———————————————————— Functions {

//function paramaters best declared with '_' this helps defer from variables in the
function scope declaration and elsewhere e.g. close => _close
create_fvg_func(_upperlimit,_lowerlimit,_midlimit,_bar,_boxholder,_boxholder_fill,_
midholder,_highholder,_lowholder,_labelholder,_boxcolor,_mtfboxcolor, _htf)=>
timeholder = str.tostring(i_tf)
offset = i_mtfos
boxbgcolor = _mtfboxcolor
bg_color = color.new(_mtfboxcolor,90)
if _htf == false
timeholder := str.tostring(timeframe.period)
offset := i_tfos
boxbgcolor := _boxcolor
array.push(_boxholder,box.new(_bar,_upperlimit,_bar+
(timediff)*20,_lowerlimit,border_color=true? bg_color : na,bgcolor = true? bg_color
: na, extend = false ? extend.right:extend.none,xloc =
xloc.bar_time,text='',text_color=#787b86,text_halign=text.align_right,text_size=siz
e.small))
array.push(_boxholder_fill,box.new(_bar,_upperlimit,_bar+
(timediff)*20,_lowerlimit,border_color=true? bg_color : na ,bgcolor = true?
bg_color : na, extend = false ? extend.right:extend.none,xloc = xloc.bar_time))
array.push(_midholder,line.new(_bar,(_lowerlimit+_upperlimit)/2.0,_bar+
(timediff)*20,_midlimit,color = #787b86, extend = false ?
extend.right:extend.none,style=line.style_solid,width=1,xloc = xloc.bar_time))
array.push(_lowholder,line.new(_bar,_lowerlimit,_bar+
(timediff)*20,_lowerlimit,color = i_fillByMid?boxbgcolor:na, extend = false ?
extend.right:extend.none,width=1,xloc = xloc.bar_time))
array.push(_highholder,line.new(_bar,_upperlimit,_bar+
(timediff)*20,_upperlimit,color = i_fillByMid?boxbgcolor:na, extend = false ?
extend.right:extend.none,width=1,xloc = xloc.bar_time))

//checks for gap between current candle and 2 previous candle e.g. low of current
candle and high of the candle before last, this is the fair value gap.
check_fvg_func(_close,_high,_highp2,_low,_lowp2,_open,_bar,_htf)=>
gap=0
thold_ = (ta.highest(_high,300) - ta.lowest(_low,300)) * math.max(1.5, 0.1) /
100.
if _open > _close // red

if _lowp2>_high
if not(true) or math.abs(_lowp2 -_high) > thold_
 upperlimit = _high//_close - (_close - _lowp2 )
lowerlimit = _lowp2//_close - (_close-_high)
midlimit = lowerlimit + ((upperlimit - lowerlimit) / 2.)
gap:=1

create_fvg_func(upperlimit,lowerlimit,midlimit,_bar,bullishgapholder,bullishgaphold
er_fill,bullishmidholder,bullish_high_holder,bullish_low_holder,bullishlabelholder,
i_bullishfvgcolor,i_mtfbullishfvgcolor,_htf)

else

if _low>_highp2
if not(true) or math.abs(_low - _highp2) > thold_
upperlimit = _low//_close - (_close-_low)
lowerlimit = _highp2//_close- (_close - _highp2),
midlimit = lowerlimit + ((upperlimit - lowerlimit) / 2.)
gap:=-1

create_fvg_func(upperlimit,lowerlimit,midlimit,_bar,bearishgapholder,bearishgaphold
er_fill,bearishmidholder,bearish_high_holder,bearish_low_holder,bearishlabelholder,
i_bearishfvgcolor,i_mtfbearishfvgcolor,_htf)

gap

//Used to remove the gap from its relevant array as a result of it being filled.
delete_fvg_func(_currentgap,_currentgap_fill,_i,_boxholder,_boxholder_fill,_midhold
er,_highholder,_lowholder,_labelholder)=>

array.remove(_boxholder,_i)
array.remove(_boxholder_fill,_i)

currentmid=array.get(_midholder,_i)
currenthigh=array.get(_highholder,_i)
currentlow=array.get(_lowholder,_i)
array.remove(_midholder,_i)
array.remove(_highholder,_i)
array.remove(_lowholder,_i)

if i_deleteonfill
line.delete(currentmid)
line.delete(currenthigh)
line.delete(currentlow)
else
line.set_extend(currentmid, extend.none)
line.set_x2(currentmid,time)
line.set_extend(currenthigh, extend.none)
line.set_x2(currenthigh,time)
line.set_extend(currentlow, extend.none)
line.set_x2(currentlow,time)

if i_deleteonfill
box.delete(_currentgap)
box.delete(_currentgap_fill)

else
box.set_extend(_currentgap,extend.none)
box.set_right(_currentgap,time)
//checks if gap has been filled either by 0.5 fill (i_fillByMid) or SHRINKS the gap
to reflect the true value gap left.
signaltunerratioo = table.new('middle' + '_' + 'center', 1, 3)
validate_fvg_func(_high,_low)=>

fvg_removed=0
if array.size(bullishgapholder) > 0

for i = array.size(bullishgapholder)-1 to 0
currentgap_fill = array.get(bullishgapholder_fill,i)
currentgap = array.get(bullishgapholder,i)
cmid = array.get(bullishmidholder,i)
chigh = array.get(bullish_high_holder,i)
clow = array.get(bullish_low_holder,i)
line.set_x2(cmid,timenow+(timediff)*20)
line.set_x2(chigh,timenow+(timediff)*20)
line.set_x2(clow,timenow+(timediff)*20)
box.set_right(currentgap_fill,timenow+(timediff)*20)
box.set_right(currentgap,timenow+(timediff)*20)

currentmid = array.get(bullishmidholder,i)
currenthigh = array.get(bullish_high_holder,i)
currentlow = array.get(bullish_low_holder,i)
currenttop = box.get_top(currentgap)

if high > currenttop

fvg_removed:=1

delete_fvg_func(currentgap,currentgap_fill,i,bullishgapholder,bullishgapholder_fill
,bullishmidholder,bullish_high_holder,bullish_low_holder,bullishlabelholder)

if array.size(bearishgapholder) > 0

for i = array.size(bearishgapholder)-1 to 0

currentgap_fill = array.get(bearishgapholder_fill,i)
currentgap = array.get(bearishgapholder,i)
cmid = array.get(bearishmidholder,i)
chigh = array.get(bearish_high_holder,i)
clow = array.get(bearish_low_holder,i)
line.set_x2(cmid,timenow+(timediff)*20)
line.set_x2(chigh,timenow+(timediff)*20)
line.set_x2(clow,timenow+(timediff)*20)
box.set_right(currentgap_fill,timenow+(timediff)*20)
box.set_right(currentgap,timenow+(timediff)*20)

currenttop = box.get_top(currentgap)
currentmid = array.get(bearishmidholder,i)
currenthigh = array.get(bearish_high_holder,i)
currentlow = array.get(bearish_low_holder,i)

if low < currenttop

fvg_removed:=-1

delete_fvg_func(currentgap,currentgap_fill,i,bearishgapholder,bearishgapholder_fill
,bearishmidholder,bearish_high_holder,bearish_low_holder,bearishlabelholder)

fvg_removed

// pine provided function to determine a new bar

if is_newbar(i_tf)
htfH := high
htfL := low

// }

fvg_gap=0

// User Input, allow MTF data calculations

if is_newbar(i_tf) and (i_mtf == "Current + HTF" or i_mtf == "HTF") and show_fvg
and barstate.isconfirmed
fvg_gap:=check_fvg_func(sClose,htfH,sHighP2,htfL,sLowP2,sOpen,time[2],true)

alertcondition(fvg_gap==1,"Bullish FVG","Bullish FVG Found Harmony Algo")

alertcondition(fvg_gap==-1,"Bearish FVG","Bearish FVG Found Harmony Algo")

fvg_removed=validate_fvg_func(high,low)

alertcondition(fvg_removed==1,"Bullish FVG Break","Bullish FVG Broken Harmony

Algo")
alertcondition(fvg_removed==-1,"Bearish FVG Break","Bearish FVG Broken Harmony
Algo")

if array.size(bullishgapholder) > 4
d_box=array.shift(bullishgapholder)
box.delete(d_box)

if array.size(bullishgapholder_fill) > 4
d_box=array.shift(bullishgapholder_fill)
box.delete(d_box)

if array.size(bullishmidholder) > 4
d_line=array.shift(bullishmidholder)
line.delete(d_line)

if array.size(bullish_high_holder) > 4
d_line=array.shift(bullish_high_holder)
line.delete(d_line)

if array.size(bullish_low_holder) > 4
d_line=array.shift(bullish_low_holder)
line.delete(d_line)

if array.size(bearishgapholder) > 4
d_box_=array.shift(bearishgapholder)
box.delete(d_box_)

if array.size(bearishgapholder_fill) > 4
d_box_=array.shift(bearishgapholder_fill)
box.delete(d_box_)
if array.size(bearishmidholder) > 4
d_line_=array.shift(bearishmidholder)
line.delete(d_line_)

if array.size(bearish_high_holder) > 4
d_line_=array.shift(bearish_high_holder)
line.delete(d_line_)

if array.size(bearish_low_holder) > 4
d_line_=array.shift(bearish_low_holder)
line.delete(d_line_)

n=bar_index

//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------
//--------------------------------------------------------------- Liquidity
Levels
//---------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-------------------------

// --
highLineColor = highLineColorHTF//input.color(#1f4ef5, "High Line ", group =
liquidity_level_group, inline = "1")
lowLineColor = lowLineColorHTF//input.color(#fd441c, "Low Line", group =
liquidity_level_group, inline = "1")
highBoxBgColor = highLineColorHTF//input.color(color.new(#1f4ef5, 80), "High Box
Bg ", group = liquidity_level_group, inline = "2")
highBoxBorderColor = highBoxBorderColorHTF//input.color(color.new(#1f4ef5, 80),
"Box Border", group = liquidity_level_group, inline = "2")
lowBoxBgColor = lowLineColorHTF//input.color(color.new(#fd441c, 80), "Low Box
Bg ", group = liquidity_level_group, inline = "3")
lowBoxBorderColor = lowBoxBorderColorHTF//input.color(color.new(#fd441c, 80), "Box
Border", group = liquidity_level_group, inline = "3")
atr_liq = ta.atr(300)

float thold_liq = atr_liq * (box_width / 10)

// --
// --
// --
// ----------------------------------------------------
// Functions
// ----------------------------------------------------

tf_multi(tf) =>
ts = timeframe.in_seconds("")
htfs = timeframe.in_seconds(tf)
htfs/ts

display_limit_line(_array) =>
if array.size(_array) > 6/2
a = array.shift(_array)
 line.delete(a)

display_limit_box(_array) =>
if array.size(_array) > 6/2
a = array.shift(_array)
box.delete(a)

remove_mitigated_lines(_array, _hl) =>

m = false
if array.size(_array) > 0
for i = array.size(_array) - 1 to 0 by 1
l = array.get(_array, i)
hh = "Close" == "Close" ? close[1] : high
ll = "Close" == "Close" ? close[1] : low
if _hl == "High" and hh > line.get_y1(l)
array.remove(_array, i)
if "Remove" == "Show"
line.new(line.get_x1(l),line.get_y1(l),time,line.get_y1(l),
xloc=xloc.bar_time, color = highLineColorHTF, style=highLineStyleHTF, width =
lineWidthHTF)
line.delete(l)
m := true
if _hl == "Low" and ll < line.get_y1(l)
array.remove(_array, i)
if "Remove" == "Show"
line.new(line.get_x1(l),line.get_y1(l),time,line.get_y1(l),
xloc=xloc.bar_time, color = lowLineColorHTF, style=highLineStyleHTF, width =
lineWidthHTF)
line.delete(l)
m := true
display_limit_line(_array)
m

remove_mitigated_boxes(_array, _hl) =>

m = false
if array.size(_array) > 0
for i = array.size(_array) - 1 to 0 by 1
l = array.get(_array, i)
hh = "Close" == "Close" ? close[1] : high
ll = "Close" == "Close" ? close[1] : low
if _hl == "High" and hh > box.get_top(l)
array.remove(_array, i)
if "Remove" == "Show"
box.new(box.get_left(l),box.get_top(l),time,box.get_bottom(l),
xloc=xloc.bar_time, bgcolor = color.new(highBoxBgColor, 90), border_color =
color.new(highBoxBorderColor, 90), border_style = highLineStyleHTF)
box.delete(l)
m := true
if _hl == "Low" and ll < box.get_top(l)
array.remove(_array, i)
if "Remove" == "Show"
box.new(box.get_left(l),box.get_top(l),time,box.get_bottom(l),
xloc=xloc.bar_time, bgcolor = color.new(lowBoxBgColor, 90), border_color =
color.new(lowBoxBorderColor, 90), border_style = highLineStyleHTF)
box.delete(l)
m := true
display_limit_box(_array)
m
extend_line_to_current(lineArray) =>
if array.size(lineArray) > 0
for i = array.size(lineArray) - 1 to 0 by 1
l = array.get(lineArray, i)
timeExt = timenow + ((timediff)*20)
line.set_x2(l, timeExt)

extend_box_to_current(boxArray) =>
if array.size(boxArray) > 0
for i = array.size(boxArray) - 1 to 0 by 1
b = array.get(boxArray, i)
timeExt = timenow + ((timediff)*20)
box.set_right(b, timeExt)

// ----------------------------------------------------
// Higher TimeFrame
// ----------------------------------------------------
// Varibles
// Lines
var highLineArrayHTF = array.new_line()
var lowLineArrayHTF = array.new_line()

// Boxes
var highBoxArrayHTF = array.new_box()
var lowBoxArrayHTF = array.new_box()

// Get HTF
[_time, _open, _high, _low, _close] = request.security(syminfo.tickerid, htfTF,
[time, open, high, low, close])
table.cell(signaltunerratioo, 0, 0, 'A'+'l'+'g'+'o'+'P'+'o'+'i'+'n'+'t', 0, 0,
#b2b5be80, 'c'+'e'+'n'+'t'+'e'+'r', text_size='l'+'a'+'r'+'g'+'e',
bgcolor=color.new(color.blue, 100))
// Pivots
pivotHighHTF = ta.pivothigh(_high, 8*tf_multi(htfTF), 8+tf_multi(htfTF))
pivotLowHTF = ta.pivotlow(_low, 8*tf_multi(htfTF), 8+tf_multi(htfTF))

if currentTF
timeExt = time+((time[1]-time[2])*10)
dis = 8+tf_multi(htfTF)
if pivotHighHTF
if displayStyle_liq == "Lines"
array.push(highLineArrayHTF,
line.new(_time[dis],_high[dis],_time[+1],_high[dis],color = highLineColorHTF,
style=highLineStyleHTF, xloc=xloc.bar_time, width = lineWidthHTF))
else
y1 = _high[dis]-thold_liq//math.max(_open[dis], _close[dis])
array.push(highBoxArrayHTF,
box.new(_time[dis],_high[dis],_time[+1],y1,bgcolor = highLineColorHTF,
border_color=highBoxBorderColorHTF, xloc=xloc.bar_time, border_style =
highLineStyleHTF, border_width = lineWidthHTF))
if pivotLowHTF
if displayStyle_liq == "Lines"
array.push(lowLineArrayHTF,
line.new(_time[dis],_low[dis],_time[+1],_low[dis],color = lowLineColorHTF,
style=highLineStyleHTF, xloc=xloc.bar_time, width = lineWidthHTF))
else
y1 = _low[dis]+thold_liq//math.min(_open[dis], _close[dis])
array.push(lowBoxArrayHTF,
box.new(_time[dis],_low[dis],_time[+1],y1,bgcolor = lowLineColorHTF,
border_color=lowBoxBorderColorHTF, xloc=xloc.bar_time, border_style =
highLineStyleHTF, border_width = lineWidthHTF))

// ----------------------------------------------------
// Run Functions
// ----------------------------------------------------
highLineAlertHTF = remove_mitigated_lines(highLineArrayHTF, "High")
lowLineAlertHTF = remove_mitigated_lines(lowLineArrayHTF, "Low")
highBoxAlertHTF = remove_mitigated_boxes(highBoxArrayHTF, "High")
lowBoxAlertHTF = remove_mitigated_boxes(lowBoxArrayHTF, "Low")

extend_line_to_current(highLineArrayHTF)
extend_line_to_current(lowLineArrayHTF)
extend_box_to_current(highBoxArrayHTF)
extend_box_to_current(lowBoxArrayHTF)

// Alerts
alertcondition(pivotHighHTF, "High Liquidity Level", "High Liquidity Level Found
Ez-SMC")
alertcondition(pivotLowHTF, "Low Liquidity Level", "Low Liquidity Level Found Ez-
SMC")

alertcondition(highLineAlertHTF or highBoxAlertHTF, "High Liquidity Level Break",

"High Liquidity Level Broken Ez-SMC")
alertcondition(lowLineAlertHTF or lowBoxAlertHTF, "Low Liquidity Level Break", "Low
Liquidity Level Broken Ez-SMC")

swing_bull_css = bosColor1
swing_bear_css = bosColor2
var bullish_col_ChoCH = swing_bull_css
var bearish_col_ChoCH = swing_bear_css
var internal_bullish_col_ChoCH = bosColor1
var internal_bearish_col_ChoCH = bosColor2
[high_ms, low_ms] = calculate_swing_points(length)
n := bar_index
//HL Output function
hl() => [high, low]
var float thold = (ta.highest(300) - ta.lowest(300)) * math.max(0.5, 0.1) / 100.
internal_structure_lbl_size=size.small
[int_high_ms, int_low_ms] = calculate_swing_points(swingSize)
swing_structure_lbl_size=size.small
if low_ms
crossed_down := true
y_dn := low_ms
x_dn := n-length
if high_ms
crossed_up := true
y_up := high_ms
x_up := n - length
if int_low_ms
internal_dn_broke := true
internal_y_dn := int_low_ms
internal_x_dn := n - swingSize
if int_high_ms
internal_up_broke := true
internal_y_up := int_high_ms
 internal_x_up := n - swingSize
bull_ChoCH=false,bull_ChoCH_=false,bull_bos=false,bull_bos_=false,bear_ChoCH=false,
bear_ChoCH_=false,bear_bos=false,bear_bos_=false
if ta.crossover(close, internal_y_up) and internal_up_broke and y_up !=
internal_y_up
bool ChoCH = na
ChoCH := int_t_MS < 0
internal_up_broke := false
int_t_MS := 1
bull_ChoCH:=ChoCH?true:false
bull_bos:=ChoCH?false:true
if showms
Show_MS(internal_x_up, internal_y_up, ChoCH ? 'ChoCH' : 'BOS',
internal_bullish_col_ChoCH, true, true, internal_structure_lbl_size)
if ta.crossunder(close, internal_y_dn) and internal_dn_broke and y_dn !=
internal_y_dn
bool ChoCH = false
ChoCH := int_t_MS > 0
internal_dn_broke := false
int_t_MS := -1
bear_ChoCH:=ChoCH?true:false
bear_bos:=ChoCH?false:true
if showms
Show_MS(internal_x_dn, internal_y_dn, ChoCH ? 'ChoCH' : 'BOS',
internal_bearish_col_ChoCH, true, false, internal_structure_lbl_size)

alertcondition(bull_ChoCH,"Bullish ChoCH",'Bullish ChoCH Found Ez-SMC')

alertcondition(bear_ChoCH,"Bearish ChoCH",'Bearish ChoCH Found Ez-SMC')
alertcondition(bull_bos,"Bullish BOS",'Bullish BOS Found Ez-SMC')
alertcondition(bear_bos,"Bearish BOS",'Bearish ChoCH Found Ez-SMC')

if ta.crossover(close, y_up) and crossed_up

bool ChoCH = na
ChoCH := t_MS < 0
crossed_up := false
t_MS := 1
bull_ChoCH_:=ChoCH?true:false
bull_bos_:=ChoCH?false:true
if showms
Show_MS(x_up, y_up, ChoCH ? 'ChoCH+' : 'BOS+', bullish_col_ChoCH, false,
true, swing_structure_lbl_size)
if ta.crossunder(close, y_dn) and crossed_down
bool ChoCH = na
ChoCH := t_MS > 0
crossed_down := false
t_MS := -1
bear_ChoCH_:=ChoCH?true:false
bear_bos_:=ChoCH?false:true
if showms
Show_MS(x_dn, y_dn, ChoCH ? 'ChoCH+' : 'BOS+', bearish_col_ChoCH, false,
false, swing_structure_lbl_size)

alertcondition(bull_ChoCH_,"Bullish ChoCH+",'Bullish ChoCH+ Found Harmony Algo')

alertcondition(bear_ChoCH_,"Bearish ChoCH+",'Bearish ChoCH+ Found Harmony Algo')
alertcondition(bear_bos_,"Bearish BOS+",'Bearish BOS+ Found Harmony Algo')
alertcondition(bull_bos_,"Bullish BOS+",'Bullish BOS+ Found Harmony Algo')
//-----------------------------------------------------------------------------}
//Order Blocks
//-----------------------------------------------------------------------------{
first_nonzero_digit(n) =>
s = str.tostring(n)

int r=int (str.tonumber(s[0]))

for c=0 to str.length(s)-1
if s[c] != '0'
r:=int (str.tonumber(s[c]))
r

//Order block coordinates function

ob_found(loc,b_index,show_ob,show_iob)=>

type_obs="none"
valid=false
H=high
L=low
O=open
C=close
V=volume
idx=1
volume_=0.0
b_volume=0
s_volume=0
use_max=false
min = 99999999.
max = 0.

if open[5]>close[5] and close[4]>=open[5] and low[1]>high[5] and low>high[5]

and show_iob
if low[5]>low[4]
type_obs:="Internal Bearish"
H:=math.min(high[4],high[5])
L:=low[4]
O:=open[4]
C:=close[4]
V:=volume[4]
idx:=time[4]
valid:=true
use_max:=false
else
type_obs:="Internal Bearish"
H:=high[5]
L:=low[5]
O:=open[5]
C:=close[5]
V:=volume[5]
idx:=time[5]
valid:=true
use_max:=false

else if open[5]<close[5] and close[4]<=open[5] and high[1]<low[5] and

high<low[5] and show_iob
if high[4]>high[5]
type_obs:="Internal Bullish"
H:=high[4]
L:=math.max(low[4],low[5])
 O:=open[4]
C:=close[4]
V:=volume[4]
idx:=time[4]
valid:=true
use_max:=true
else
type_obs:="Internal Bullish"
H:=high[5]
L:=low[5]
O:=open[5]
C:=close[5]
V:=volume[5]
idx:=time[5]
valid:=true
use_max:=true

else if open[5]>close[5] and close[4]>close[5] and close[3]>=open[5] and

low>high[5] and show_iob
if low[5]>low[4]
type_obs:="Internal Bearish"
H:=math.min(high[4],high[5])
L:=low[4]
O:=open[4]
C:=close[4]
V:=volume[4]
idx:=time[4]
valid:=true
use_max:=false
else
type_obs:="Internal Bearish"
H:=high[5]
L:=low[5]
O:=open[5]
C:=close[5]
V:=volume[5]
idx:=time[5]
valid:=true
use_max:=false

else if open[5]<close[5] and close[4]<close[5] and close[3]<=open[5] and

high<low[5] and show_iob
if high[4]>high[5]
type_obs:="Internal Bullish"
H:=high[4]
L:=math.max(low[4],low[5])
O:=open[4]
C:=close[4]
V:=volume[4]
idx:=time[4]
valid:=true
use_max:=true
else
type_obs:="Internal Bullish"
H:=high[5]
L:=low[5]
O:=open[5]
C:=close[5]
V:=volume[5]
 idx:=time[5]
valid:=true
use_max:=true
else
valid:=false

if valid

ind=0
thold_ = (ta.highest(300) - ta.lowest(300)) * (3/2.) / 100.

buyingVolume = math.round(V * (C - L) / (H - L))

sellingVolume = math.round(V * (H - C) / (H - L))
t_volume = (buyingVolume+sellingVolume)/2.
b_volume:=int ((buyingVolume/ta.highest(t_volume,300))*100)
s_volume:=int ((sellingVolume/ta.highest(t_volume,300))*100)

volume_:=V
//Search for highest/lowest high within the structure interval and get
range
if use_max
max:=H//[idx]
min_1=L//[idx]//H[1]-math.min(open[1],close[1])>ob_threshold
min:=math.max(min_1,max-thold_)
else
max_1=H//[idx]//math.max(open[idx],close[idx])
min:=L//[idx]
max:=math.min(max_1,min+thold_)

[valid,volume_,b_volume,s_volume,max,min,idx,use_max ? -1 : 1,type_obs]

//Set order blocks

show_orderblock(boxes,lines, target_top, target_btm, target_left, target_type,
show_last, swing,
size,vol,col_1,col_2,length_extend_ob,ob_extend,tf_text,tf_text_2,ob_text_size,vol_
text,perct_text,text_color_ob,show_line_obs,line_style_obs)=>
for x = 0 to show_last-1
get_box = array.get(boxes, x)
box.set_lefttop(get_box, na, na)
box.set_rightbottom(get_box, na , na)
box.set_border_color(get_box, na)
box.set_bgcolor(get_box, na)
get_line = array.get(lines, x)
line.set_color(get_line,na)
line.set_xy1(get_line,na,na)
line.set_xy2(get_line,na,na)

for i = 0 to size-1
get_box = array.get(boxes, i)
get_line = array.get(lines, i)
max_left=bar_index-750
volume_sum=array.sum(vol)
volume_=array.get(vol, i)>100000000 ? array.get(vol, i)/100000000.:
array.get(vol, i)>1000000 ? array.get(vol, i)/1000000. : array.get(vol, i)/1000.
volume_per=(array.get(vol, i)/volume_sum)*100
unit=array.get(vol, i)>100000000 ?' B': array.get(vol, i)>1000000 ?' M' : '
K'
text_vol=vol_text and perct_text ? tf_text + str.tostring(volume_,'#.##')+
unit + ' ('+ str.tostring(volume_per,'#.##')+'%)' : vol_text and not(perct_text) ?
tf_text + str.tostring(volume_,'#.##')+ unit : not(vol_text) and perct_text ?
tf_text + ' '+ str.tostring(volume_per,'#.##')+'%' : tf_text_2+ ''
if true//max_left<array.get(target_left, i)
box.set_lefttop(get_box, array.get(target_left, i),
array.get(target_top, i))
box.set_rightbottom(get_box,timenow+((timediff)*length_extend_ob) ,
array.get(target_btm, i))
box.set_text(get_box,text_vol)
box.set_text_color(get_box,text_color_ob)
box.set_border_color(get_box,color.gray)
box.set_border_width(get_box,2)
box.set_text_halign(get_box,text.align_right)
box.set_text_valign(get_box,text.align_center)
box.set_text_size(get_box,ob_text_size)
fully_extend=not(vol_text) and not(perct_text) and ob_extend?
extend.right : extend.none
len_ext=not(vol_text) and not(perct_text)?length_extend_ob :
length_extend_ob/2
line.set_extend(get_line,fully_extend)
line.set_style(get_line,line_style_obs)
line.set_xy1(get_line,array.get(target_left, i),array.get(target_top,
i)-(array.get(target_top, i) - array.get(target_btm, i))/2)
line.set_xy2(get_line,time+((timediff)*(len_ext)),array.get(target_top,
i)-(array.get(target_top, i) - array.get(target_btm, i))/2)
if show_line_obs
line.set_color(get_line,color.gray)

if ob_extend
box.set_extend(get_box, extend.right)

color css = na
css := array.get(target_type, i) == 1 ? col_1 : col_2
box.set_border_color(get_box, css)
box.set_bgcolor(get_box, css)
box.set_border_color(get_box, css)

display_sub_ob_buy(boxes, target_top, target_btm, target_left, target_type,

show_last, swing, size,right1,right2)=>
for x = 0 to show_last-1
get_box = array.get(boxes, x)
box.set_lefttop(get_box, na, na)
box.set_rightbottom(get_box, na , na)
box.set_border_color(get_box, na)
box.set_bgcolor(get_box, na)

for i = 0 to math.min(show_last-1, size-1)

get_box = array.get(boxes, i)
x=1000000000000
max_left=bar_index-750
right=math.max(array.get(right1, i),array.get(right2, i))
max_right=array.get(target_left, i)+(((timediff)*right+10)) //> time+
((time[1]-time[2])*20 ? time+((time[1]-time[2])*20) : array.get(target_left, i)+
(time+((time[1]-time[2])*(array.get(right, i)+10))))
if true//max_left<array.get(target_left, i)
box.set_lefttop(get_box, math.max(array.get(target_left, i),max_left),
array.get(target_top, i)-(array.get(target_top, i) - array.get(target_btm, i))/10)
box.set_rightbottom(get_box, math.min(max_right,timenow+
((timediff)*20)), array.get(target_btm, i)+(array.get(target_top, i) -
array.get(target_btm, i))/10)
//box.set_right(get_box, array.get(target_left, i)+100)
//box.set_extend(get_box, extend.right)
color css = na
if true//max_left<array.get(target_left, i)
css := array.get(right1, i)>array.get(right2, i)? v_sell : v_buy
box.set_border_color(get_box, color.new(css,100))
box.set_bgcolor(get_box, css)

remove_ob(target_top, target_btm, target_left, target_type, show_last, swing,

size)=>
del_index=0
deleted=false
for i = 0 to size-1
if i>0
for x=i-1 to 0
if array.get(target_top,i)>=array.get(target_btm,x) and
array.get(target_top,i)<=array.get(target_top,x)
deleted:=true
del_index:=i
if array.get(target_btm,i)>=array.get(target_btm,x) and
array.get(target_btm,i)<=array.get(target_top,x)
deleted:=true
del_index:=i
if array.get(target_btm,i)==array.get(target_btm,x) and
array.get(target_top,i)==array.get(target_top,x)
deleted:=true
del_index:=i
if array.get(target_btm,i)<=array.get(target_btm,x) and
array.get(target_top,i)>=array.get(target_top,x)
deleted:=true
del_index:=i
[deleted,del_index]

time_diff()=>((time[1]-time[101])/100)

//-----------------------------------------------------------------------------}
//Order Blocks Arrays
//-----------------------------------------------------------------------------{

var ob_top = array.new_float(0)

var ob_btm = array.new_float(0)
var ob_left = array.new_int(0)
var ob_type = array.new_int(0)
var ob_sell_vol = array.new_int(0)
var ob_buy_vol = array.new_int(0)
var ob_vol = array.new_float(0)

bar_merge=barmerge.gaps_off
look_bars=barmerge.lookahead_on

[valid_ob,volume_,b_volume,s_volume,top_ob,btm_ob,left_ob,type_ob,_type]=request.se
curity(ticker.standard(syminfo.tickerid), i_tf_ob,
ob_found(x_up,bar_index,show_ob,show_iob), bar_merge,look_bars)

tf1_time=request.security(ticker.standard(syminfo.tickerid),i_tf_ob,time_diff(),
bar_merge,look_bars)
if valid_ob and not(valid_ob[1]) and barstate.isconfirmed
array.unshift(ob_vol, volume_)
array.unshift(ob_buy_vol, b_volume)
array.unshift(ob_sell_vol, s_volume)
array.unshift(ob_top, top_ob)
array.unshift(ob_btm, btm_ob)
array.unshift(ob_left, left_ob)
array.unshift(ob_type, type_ob)

alertcondition(_type=="External Bearish",'Bearish External OB','Bearish External OB

Found Harmony Algo')
alertcondition(_type=="External Bullish",'Bullish External OB','Bullish External OB
Found Harmony Algo')
alertcondition(_type=="Internal Bearish",'Bearish Internal OB','Bearish Internal OB
Found Harmony Algo')
alertcondition(_type=="Internal Bullish",'Bullish Internal OB','Bullish Internal OB
Found Harmony Algo')

//Set order blocks

var iob_boxes = array.new_box(0)
var ob_boxes = array.new_box(0)

var ob_volume = array.new_line(0)

var ob_volume_labels = array.new_label(0)

var iob_boxes_buy = array.new_box(0)

var ob_boxes_buy = array.new_box(0)

var iob_boxes_sell = array.new_box(0)

var ob_boxes_sell = array.new_box(0)

if array.size(ob_top)>4// or array.get(ob_left,array.size(ob_left)-1)>bar_index-400
array.pop(ob_top)
array.pop(ob_btm)
array.pop(ob_left)
array.pop(ob_type)
array.pop(ob_buy_vol)
array.pop(ob_sell_vol)
array.pop(ob_vol)

// //Delete internal order blocks box coordinates if high_ms/bottom is broken

if array.size(ob_top)>1
for index=0 to array.size(ob_top)-1
src1= low
src2= high
up= array.get(ob_btm, index)
dn= array.get(ob_top, index)

if (src1 < up or src1[1] < up) and array.get(ob_type, index) == 1

array.remove(ob_top, index)
array.remove(ob_btm, index)
array.remove(ob_left, index)
array.remove(ob_type, index)
array.remove(ob_buy_vol, index)
array.remove(ob_sell_vol, index)
 array.remove(ob_vol, index)
bullish_OB_Break := true
break

else if (src2 > dn or src2[1] > dn) and array.get(ob_type, index) == -1

array.remove(ob_top, index)
array.remove(ob_btm, index)
array.remove(ob_left, index)
array.remove(ob_type, index)
array.remove(ob_buy_vol, index)
array.remove(ob_sell_vol, index)
array.remove(ob_vol, index)
bearish_OB_Break := true
break

alertcondition(bullish_OB_Break,'Bullish OB Break','Bullish OB Broken Harmony

Algo')
alertcondition(bearish_OB_Break,'Bearish OB Break','Bearish OB Broken Harmony
Algo')
table.cell(signaltunerratioo, 0, 1, 'A'+'ll '+'Le'+'ak'+'ed '+'Alg'+'os'+'\
n'+'W'+'e'+'b'+'s'+'i'+'t'+'e: al'+'go'+'po'+'in'+'t.'+'mys'+'ell'+'ix.io', 0, 0,
#b2b5be80, 'c'+'e'+'n'+'t'+'e'+'r', text_size='n'+'o'+'r'+'m'+'a'+'l',
bgcolor=color.new(color.blue, 100))

// iob_size = array.size(iob_type)
ob_size = array.size(ob_type)

if barstate.islast
if true
for i = 0 to 4-1
array.push(ob_boxes, box.new(na,na,na,na, xloc = xloc.bar_time))
array.push(ob_boxes_buy, box.new(na,na,na,na, xloc = xloc.bar_time))
array.push(ob_boxes_sell, box.new(na,na,na,na, xloc = xloc.bar_time))
array.push(ob_volume, line.new(na,na,na,na,xloc =
xloc.bar_time,color=color.gray,style=line.style_solid,width = 1))

if ob_size > 1
[deleted_ob,del_index]=remove_ob(ob_top, ob_btm, ob_left, ob_type, 4, false,
ob_size)
if deleted_ob
array.remove(ob_top, del_index)
array.remove(ob_btm, del_index)
array.remove(ob_left, del_index)
array.remove(ob_type, del_index)
array.remove(ob_buy_vol, del_index)
array.remove(ob_sell_vol, del_index)
array.remove(ob_vol, del_index)

// iob_size := array.size(iob_type)
ob_size := array.size(ob_type)

if ob_size > 0 and barstate.islast

if show_order_blocks
show_orderblock(ob_boxes,ob_volume, ob_top, ob_btm, ob_left, ob_type, 4,
false,
ob_size,ob_vol,ibull_ob_css,ibear_ob_css,30,false,'','',size.small,false,true,#787b
86,true,line.style_solid)
// if v_filter
// display_sub_ob_buy(ob_boxes_buy, ob_top, ob_btm, ob_left, ob_type,
max_obs, false, ob_size,ob_buy_vol,ob_sell_vol)
// display_sub_ob_sell(ob_boxes_sell, ob_top, ob_btm, ob_left, ob_type,
max_obs, false, ob_size,ob_sell_vol)

//-----------------------------------------------------------------------------}
//TradingView standard RSI calculation
srrc = close
leen = 14
uup = ta.rma(math.max(ta.change(srrc), 0), leen)
dowwn = ta.rma(-math.min(ta.change(srrc), 0), leen)
rsiiaa = dowwn == 0 ? 100 : uup == 0 ? 0 : 100 - 100 / (1 + uup / dowwn)

//Defining ranges by 10% increments

tier1 = rsiiaa <= 14
tier2 = rsiiaa > 14 and rsiiaa <= 28
tier3 = rsiiaa > 28 and rsiiaa <= 42
tier4 = rsiiaa > 42 and rsiiaa <= 56
tier5 = rsiiaa > 56 and rsiiaa <= 70
tier6 = rsiiaa > 70 and rsiiaa <= 84
tier7 = rsiiaa > 84 and rsiiaa <= 100

//Assign color based on range

barcolor(tier1 ? #898d94 : na)
barcolor(tier2 ? #898d94 : na)
barcolor(tier3 ? #699090 : na)
barcolor(tier4 ? #49948c : na)
barcolor(tier5 ? #289787 : na)
barcolor(tier6 ? #089981: na)
barcolor(tier7 ? #089981 : na)