Advancement Report

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Academic year 2024-2025

Aeronautics design project


Advancement report

Authors Professors
Claire Jewasinski S212564 Thomas andrianne
Tyler Mattson S2403268 Ludovic Noels
Matteo Schmetz S215386
Noam Schmitz S214896 Assistants
Thomas Ucci S214900 Arnaud Budo
Irina Vanhaverbeke S214770 Paul Dechamps
1 Task separation
We decide to separate tasks as each group member have a main one. Everybody has also one
or two task assign to help if the main member have questions. The CAD part is assigned to
two group members because it is a bigger part.

1. Definition of the design missions and requirements: Claire + everyone

2. CAD : Tyler and Thomas

3. Wing : Tyler + Noam

4. Empennage/ canard (foreplane)/ fin : Noam + Claire

5. Fuselage and Landing gear design: Claire + Matteo

6. Propulsion: Matteo + Noam

7. Structure: Thomas + Claire

8. Static stability: Irina + Matteo

9. Concepts and Trade off-study : Irina

2 First approximations
The first approximations are chosen by comparing business jet similar the one we want design.
These jet are : Falcon 10x, Bombardier 7500, Gulfstream G700 and Bombardier 8000.

We want design a jet with a long range and the ability to land and takeoff in the most ex-
treme airports. We want to minimise the distance of takeoff and landing. We also want to
have an ideal ratio between stability and manoeuvrability to deal with hard weather conditions.

Imperial unit SI unit


Max T/o weight 115 000 lbs 52 163 kg
Max Landing weight 85 000 lbs 38 555 kg
Operating weight 60 000 lb 27 215 kg
Empty weight 65 000 lbs 29 483 kg
Fuel capacity 50 000 lbs Lb 22 680 kg
Max Payload 6000 lbs 2 722 kg
Exterior height 27 ft 8.2m
Wing span 114.829 ft 35m
Length 114.829 ft 35m
Cabin Height 6.89 ft 2.1m
Cabin Width 8.2021 ft 2.5m
Tail height 11.48 - 4.76 ft 3.5 - 4.5 m
Tail span 19 - 22 ft 6-7m
Normal Range 8000 nm 14 816 km

Aeronautics design project 1


3 Design preliminary choices
Our plane will be design in order to maximise the range and later to minimise the distance of
takeoff. Therefore, we initially chose to take 3 engines to power our jet.

The overall shape and dimensions of our plane should be quite similar to a Falcon 10X, or a
Bombardier 8000.

Aeronautics design project 2

You might also like