Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    SABIC DS PCGR40 00900 Healthcare English

    Uploaded by

    arturtkatsch69
    Sabic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SABIC DS PCGR40 00900 Healthcare English

    Uploaded by

    arturtkatsch69
    6 views2 pages
    Sabic

    Original Title

    SABIC_DS_PCGR40_00900_Healthcare_English

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sabic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views2 pages

    SABIC DS PCGR40 00900 Healthcare English

    Uploaded by

    arturtkatsch69
    Sabic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SABIC® PP PCGR40

    PP random copolymer for Healthcare

    Description: SABIC® PP grades for healthcare applications are produced under controlled conditions
    resulting in high product quality, consistency and a high level of purity.

    SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties.
    This grade combines improved aesthetics of the finished articles with low temperature processability and a
    very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for
    a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding
    characteristics and has a good stiffness to impact ratio.

    Typical applications: SABIC® PP PCGR40 is typically used for injection moulding of housings for empty
    disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing
    window are also possible.

    Compliance to regulations: SABIC® PP PCGR40 complies with the food contact regulations and the
    relevant monographs of the US Pharmacopoeia.

    Typical values Revision 20151001


    Properties Unit (Si) Values Test methods
    Polymer properties
    Melt flow rate (MFR) ISO 1133
    at 230 °C and 2.16 kg dg/min 40
    Density kg/m³ 905 ISO 1183
    Formulation
    Anti static agent - Yes -
    Clarified - Yes -
    Mechanical properties
    Tensile test ISO 527-2 1A
    stress at yield 1) MPa 29
    strain at yield 1) % 13
    tensile modulus 2) MPa 1150
    Izod impact notched ISO 180/1A
    at 23 °C kJ/m² 4.0
    at 0 °C kJ/m² 2.0
    Charpy impact notched ISO 179/1eA
    at 23 °C kJ/m² 4.5
    at 0 °C kJ/m² 2.0
    1) Speed of testing: 50 mm/min
    2) Speed of testing: 1 mm/min

    Internet: www.sabic-europe.com
    Email: .
    SABIC® PP PCGR40
    PP random copolymer for Healthcare

    Healthcare policy. Do not use this SABIC product in all medical applications involving any of the following medical devices in
    accordance with the classification criteria and definitions as outlined in annex IX of the EU council directive on medical devices
    (93/42/EEC of 14 June 1993 including amendments):
    1. Class IIB implantable medical devices, and both short-term (not including transient use) and long term surgically invasive devices;
    2. All medical devices in class III.

    Quality:
    SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO9001.

    Storage and handling:


    Avoid prolonged storage in open sunlight, high temperatures (<50 °C) and /or high humidity as this could well speed up alteration
    and consequently loss of quality of the material and /or its packaging. Keep material completely dry for good processing.

    Disclaimer. The information contained herein may include typical properties of our products or their typical performances when
    used in certain typical applications. Actual properties of our products, in particular when used in conjunction with any third party
    material(s) or for any non-typical applications, may differ from typical properties.

    It is the customer's responsibility to inspect and test our product(s) in order to satisfy itself as to the suitability of the product(s) for its
    and its customers particular purposes. The customer is responsible for the appropriate, safe and legal use, processing and handling
    of all product(s) purchased from us.

    Nothing herein is intended to be nor shall it constitute a warranty whatsoever, in particular, warranty of merchantability or fitness for
    a particular purpose.

    SABIC as referred to herein means any legal entity belonging to the group of companies headed by SABIC Europe B.V.

    Internet: www.sabic-europe.com
    Email: .

    You might also like