Dr. B. R.

Ambedkar National Institute of Technology Jalandhar

B. Tech. I Semester (Electrical Engineering)
Subject: Basic Electrical Engineering (EEDC0101)
Tutorial Sheet No. 01
Topics: Resistive Networks, Series-Parallel Circuits, Star Delta & Delta Star Transformation, Source Conversion,
Mesh Analysis, Node Analysis.
1 Find the resistance for the circuit shown in Fig.

[Ans: 2.2 Ω]

2 Find the equivalent resistance at terminals A and B for the circuit shown in Fig.

[Ans: 36 Ω]

3 Find the equivalent resistance for the circuit shown in Fig.

[Ans: 10 Ω]

4 Using star-delta/ delta-star transformation determine the equivalent resistance of the circuit shown in Fig.

[Ans: 6.75 Ω]

5 Find the equivalent resistance of the network (i) when the switch is open (ii) When switch is closed.

[Ans:5Ω, 4.33 Ω]

6 Find equivalent resistance of the network across terminal ab.

[Ans: 5Ω]

7 Find equivalent resistance of the network when the switches are (i) Open (ii) Closed.

1
 [Ans: 11 Ω, 8.14 Ω]

8 Find the equivalent resistance of the network when the switches are (i) open and (ii) closed.

[Ans: 13 Ω, 10 Ω]

9 Find Vo in the network in Fig.

[Ans: 24 V]

10 Find I1 in Fig.

[Ans: -1.2 A]

11 Find out the current through 6Ω resistance in the circuit shown below using source transformation.

[Ans: 0.79A]

12 Find the open circuit voltage Vo in the circuit shown below using source transformation.

2
 [Ans: 100 Volt]

13 Find 𝑖0 in the circuit of shown below using source transformation.

[Ans: -1A]

14 Find 𝑣0 in figure shown below using source transformation.

[Ans: 7.5 Volt]

15 Find current 𝑖0 and voltage 𝑣0 in the circuit shown below:

[Ans: 𝒊0= 𝟔 𝐀, 𝒗0 = 24 V ]

16 Find the currents and voltages in the circuit shown below:

[Ans: 𝒗𝟏 = 1.3 V, 𝒗𝟐= 3.7 V, 𝒗𝟑 = 0.7 V, 𝒊𝟏= 0.65 A, 𝒊𝟐 = 0.462 A, 𝒊𝟑 =0.175 A]

17 Find the value of R and the current through it in the following network shown below, where the current in
branch OA (5Ω) is zero.

3
 [Ans: 0.5 A]

18 Obtain the loop current in the following circuit.

[Ans: I1=1.1764 A, I2=0.5882 A]

19 Find the current flowing through the 6 Ω resistor using the Mesh Analysis.

[Ans: 2.5A]

20 Using KCL, find v0 and i0 in the circuit shown in fig?

[Ans: 8V, 4A]

21 Using KVL, find v1 and v2 in the circuit shown in figure. Also calculate i1 and i2 and the power dissipated in
the 12Ω and 40Ω resistors?

[Ans: V1=5V, V2=10V, I1=416.7mA , i2 =250mA, P12Ω =2.083W,P40Ω =2.5W]

22 Using KCL, find iA ,iB , ic ?

4
 [Ans: 3A, -5.4A, 6A]

23 Determine v0 and i in th circuit using KVL?

[Ans: 48V, -8A]

24 Using KVL find i and Rab in the figure.

[Ans: 2.5A, 40Ω]

25 Calculate the node voltage in the circuit shown in figure.

[Ans: v1=3.2V, v2=1.6V, v3=-1.6V]

26 Find the current Io using the node analysis for the circuit shown in Figure.

5
 [Ans: 0.3125 mA]

27 Calculate the mesh current in the circuit shown in figure A &B ?

Figure A [Ans: 2A,0A] Figure B [Ans: -3.2A, 2.8A]

28 Using mesh analysis find i0 in the circuit

[Ans: -5A]

29 Determine voltage at each node in the circuit as shown in figure A, B, C?

Figure A [Ans: 4.8 V,2.4 V, -2.4V]

6
 Figure B [Ans: 80 V, -64 V,156 V] Figure C [Ans: -7.333 V,-5.333 V]

30 Use nodal analysis to find Vo in Fig.

[Ans: 2.79 V]

31 Find the node voltages in the circuit in Fig.

[Ans: 16 V, -8 V]

32 Find the voltage Vo in the network in Fig.

[Ans: 4 V]

33 Find Vo in Fig. using nodal analysis.

7
 [Ans: 0.952 V]

34 Use nodal analysis to find Io in the network in Fig.

[Ans: 3.8 mA]

35 Find Vo in Fig. using nodal analysis.

[Ans: 5.6 V]

36 Use nodal analysis to find Io in the circuit in Fig.

[Ans: 4/3 mA]

37 Find Vo in Fig. using nodal analysis.

8
 [Ans: 6.29 V]

38 Find Vo in Fig. using loop analysis.

[Ans: 9.71 V]

39 Find Vo in Fig. using mesh analysis.

[Ans: 6.97 V]

40 Find Vo in Fig. using mesh analysis.

[Ans: 9 V]
9
41 Find Vo in the circuit in Fig. using nodal analysis.

[Ans: 10.3 V]

42 Determine v3 in the circuit of Fig.

[Ans: 104.2 V]

43 Find v1, v2 and v3 in the circuit of Fig. using nodal analysis.

[Ans: v1 =7.608 V, v2 =17.39 V, v3 =1.6305 V.]

44 Using mesh analysis, Io find in the circuit of Fig.

10
 [Ans: -4 A]

45 Use mesh analysis to determine i1, i2 and i3 in Fig.

[Ans: i1 = 4.632 A, i2 = 631.6 mA, i3 =1.4736 A]

46 By inspection, obtain the mesh-current equations for the circuit in Fig.

Ans:

47 Obtain the equivalent resistance Rab for the circuit in Fig. and use it to find current i.

11
 [Ans: 9.632 Ω, 12.458 A]

48 Using nodal analysis, find vo in the circuit of Fig.

[Ans: 50 V]

49 Determine voltages v1 through v3 in the circuit of Fig. using nodal analysis.

[Ans: v1= 18.858 V, v2 = 6.286 V, v3 = 13 V]

12