Fast Rectifier Diod 60P-400

 BYT 60P-400
FAST RECOVERY RECTIFIER DIODES
VERY LOW REVERSE RECOVERY TIME

VERY LOW SWITCHING LOSSES Cathode connected to case
LOW NOISE TURN-OFF SWITCHING
A
K
SUITABLE APPLICATIONS: SOD93

(Plastic)
FREE WHEELING DIODE IN CONVERTERS
AND MOTOR CONTROL CIRCUITS
RECTIFIER IN S.M.P.S.
ABSOLUTE RATINGS (limiting values)

Symbol Parameter Value Unit
IFRM Repetitive Peak Forward Current tp ≤ 10µs 800 A
IF (RMS) RMS Forward Current 100 A
IF (AV) Average Forward Current Tc = 70°C 60 A

δ = 0.5
IFSM Surge non Repetitive Forward Current tp = 10ms 550 A
Sinusoidal
P Power Dissipation Tc = 70°C 100 W
Tstg Storage and Junction Temperature Range - 40 to + 150 °C

Tj - 40 to + 150

VRRM Repetitive Peak Reverse Voltage 400 V
VRSM Non Repetitive Peak Reverse Voltage 440 V
THERMAL RESISTANCE
Rth (j - c) Junction-case 0.8 °C/W
August 1998 Ed : 1A 1/5

BYT 60P-400
ELECTRICAL CHARACTERISTICS
STATIC CHARACTERISTICS
Synbol Test Conditions Min. Typ. Max. Unit
IR Tj = 25°C VR = VRRM 60 µA
Tj = 100°C 10 mA
VF Tj = 25°C IF = 60A 1.5 V

Tj = 100°C 1.4
RECOVERY CHARACTERISTICS
Symbol Test Conditions Min. Typ. Max. Unit
trr Tj = 25°C IF = 1A diF/dt = - 15A/µs VR = 30V 100 ns
IF = 0.5A IR = 1A Irr = 0.25A 50
TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)

tIRM diF/dt = - 240A/µs VCC = 200 V IF = 60A 75 ns
Lp ≤ 0.05µH Tj = 100°C
diF/dt = - 480A/µs See Figure 11 50
IRM diF/dt = - 240A/µs 18 A
diF/dt = - 480A/µs 24
TURN-OFF OVERVOLTAGE COEFFICIENT - (With Series Inductance)

VRP Tj = 100°C VCC = 120V IF = IF (AV) See note 3.3
C=
VCC diF/dt = - 60A/µs Lp = 1.3 µH See figure 12
Note: Applicable to BYT 60P-400 only
To evaluate the conduction losses use the following equations:

VF = 1.1 + 0.0045 IF P = 1.1 x IF(AV) + 0.0045 IF2(RMS)
Figure 1. Low frequency power losses versus Figure 2. Peak current versus form factor.
average current.
2/5
BYT 60P-400
Figure 3. Non repetitive peak surge current Figure 4. Thermal impedance versus pulse
versus overload duration width.
Figure 5. Voltage drop versus forward current. Figure 6. Recovery charge versus diF/dt.
Figure 7. Recovery time versus di F/dt. Figure 8. Peak reverse current versus diF/dt.
3/5
BYT 60P-400
Figure 9. Peak forward voltage versus di F/dt. Figure 10. Dynamic parameters versus
junction temperature.
Figure 11. Turn-off switching characteristics (without series inductance).
Figure 12. Turn-off switching characteristics (with series inductance).
4/5
BYT 60P-400
PACKAGE MECHANICAL DATA

SOD93 Plastic
REF. DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 4.70 4.90 0.185 0.193
C 1.17 1.37 0.046 0.054
D 2.50 0.098
D1 1.27 0.050
E 0.50 0.78 0.020 0.031
F 1.10 1.30 0.043 0.051
F3 1.75 0.069
G 10.80 11.10 0.425 0.437
H 14.70 15.20 0.578 0.598
L 12.20 0.480
L2 16.20 0.638
L3 18.0 0.709
L5 3.95 4.15 0.156 0.163
L6 31.00 1.220
O 4.00 4.10 0.157 0.161
Marking: type number

Cooling method: by conduction (method C)
Weight : 3.79g
Recommended torque value: 80cm. N
Maximum torque value: 100cm. N
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Spec ifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previous ly supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval
of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
 1998 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco -
The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
5/5

Fast Rectifier Diod 60P-400

Uploaded by

Copyright:

Available Formats

Fast Rectifier Diod 60P-400

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fast Rectifier Diod 60P-400

Uploaded by

Copyright:

Available Formats

 BYT 60P-400

FAST RECOVERY RECTIFIER DIODES

VERY LOW REVERSE RECOVERY TIME

LOW NOISE TURN-OFF SWITCHING

SUITABLE APPLICATIONS: SOD93

ABSOLUTE RATINGS (limiting values)

IFRM Repetitive Peak Forward Current tp ≤ 10µs 800 A

IF (RMS) RMS Forward Current 100 A

IF (AV) Average Forward Current Tc = 70°C 60 A

Tstg Storage and Junction Temperature Range - 40 to + 150 °C

Symbol Parameter Value Unit

VRSM Non Repetitive Peak Reverse Voltage 440 V

August 1998 Ed : 1A 1/5

VF Tj = 25°C IF = 60A 1.5 V

TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)

IRM diF/dt = - 240A/µs 18 A

TURN-OFF OVERVOLTAGE COEFFICIENT - (With Series Inductance)

Note: Applicable to BYT 60P-400 only

To evaluate the conduction losses use the following equations:

Figure 11. Turn-off switching characteristics (without series inductance).

Figure 12. Turn-off switching characteristics (with series inductance).

PACKAGE MECHANICAL DATA

Marking: type number

You might also like