Scribd
Upload
24 views

Generator Engine

Uploaded by

indraadi_27
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

Generator Engine

Uploaded by

indraadi_27
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AD196T/TI/126TI MARINE GENERATOR ENGINE

Production tolerance : ± 3%
Model
Units AD196T AD196TI AD126TI
Spec.
4 cycle, in line,
4 cycle, in line, direct- injection,
direct-injection,
Engine type water cooled
water cooled
with wet- turbo charger & inter-cooler
with turbo charger
210(154)/1,500 235(173)/1,500 280(206) /1,500
50 Hz
Rating output PS(kW) (AD196TF) (AD196TIF) (AD126TIF)
(B.H.P) / rpm 246(181)/1,800 270(199)/1,800 336(247) /1,800
60 Hz
(AD196TS) (AD196TIS) (AD126TIS)
Displacement cc 11,051
Cyl. No. – bore(φ) x stroke mm 6 - Φ123 x 155
Valve clearance at cold mm 0.3 / 0.3
Low idling rpm rpm 800 ± 50
No load max. rpm Mechanical governor : 1575 (52.5 Hz) / 1890(63Hz),
rpm
(50Hz / 60Hz) Electric governor : 1500 (50 Hz) / 1800(60Hz),
Mean effective press. (Initial ) ㎏/㎠ 11.40 / 11.13 12.76 / 12.21 15.20 / 15.20
Mean piston speed
m/sec. 7.75 / 9.30
(50Hz / 60Hz)
Compression ratio 17.1 16.5 17
Max. firing press. of cylinder ㎏/㎠ 106 105 130
Comp. Press. (at 200 rpm) ㎏/㎠ About 28 (Initial condition)
Governor type of inj. pump Electric Governor
Fuel consumption g/PS.h 156 / 158 145 / 148 150 / 152
liter/h 39 / 47 41 / 48 50 / 61
Injection timing (B.T.D.C) deg. 14° ± 1° 16° ± 1° 14° ± 1°
Inj. nozzle opening press. ㎏/㎠ 224
Starting system Electric Starting by starter motor
Starter motor capacity V- kW 24 V – 6.0
Alternator capacity V- A 24 V – 50
Battery V- Ah 24V – 150
Cooling system Indirect cooling by sea water with heat exchanger
Cooling water capacity lit Max. : 25 , Min. : 23
Fresh water pump type Centrifugal type, driven gear
Sea water pump type Rubber impeller type driven by gear
Pan
Lub. Oil lit Max : 25, Min : 19 ( Engine total : 27)
capacity
(Engine)
Pressure ㎏/㎠ Full : 3.5, Idle: 1.2
Revolution of Crankshaft Counter clockwise viewed from stern side
Engine size (L x W x H)
mm 1,193 x 854 x 1,072 1,193 x 854 x 1,072 1,193 x 854 x 1,072
(Except reduction gear)
Engine dry weight
kg 975 1,009 1,060
(Except reduction gear)

※ Specifications are subject to change without prior notice.

DOOSAN Infracore Printed in November 2005 PS-SBM0505-E2D

You might also like