ICS1020G UPCOM Switch
ICS1020G UPCOM Switch
Features
● Support 16-port 10/100/1000M Base-T (x) +4-port Gigabit SFP;
● Comply with IEC61850-3 standard;
● Support RIP, OSPF, PIM Layer 3 Routing protocol;
● Support MW-Ring, MSTP, VRRP, EAPS redundancy network;
● Support multiple management methods and network centralized management;
● Support Front and rear indicator lights design;
● Support firmware upgrade online;
● Support relay alarm output;
● Support indicator status display;
● Support Broadcast storm suppression;
● Support dual AC/DC 220V power supply;
● Power supply input support anti-reverse protection and non-polarity;
● Support over Voltage, over current, EMC protection;
● Support wide operating temperature range from -40-85oC;
● 1U, 19-inch Rack-mount Installation;
● Warranty:5years;
Introduction
ICS1020G-16G-4GS is an industrial grade, Rack-mount, layer3, Managed Ethernet switch which supports 16-
port 10/100/1000M RJ45 + 4-port Gigabit SFP. providing sufficient data for aggregation and core data
exchange of the bandwidth; to provide high-capacity switching capabilities to support based on the three
layers of ACL function. Perfect security control strategy and CPU protection policy to improve fault tolerance
and ensure stable operation of the network and link load balancing.
UPCOM ICS1020G-16G-4GS not only supports rich Layer 2 software features such as ports, VLANs, multicast,
QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports
multiple management methods of Console, Web, and host computer network management software, can
satisfied the requirement of various industrial applications such as Intelligent Transportation System, Security
Surveillance, Industrial Automation, Smart Grid, Rail Transportation Industry, Safely City, and New Energy, etc.
Application
● Intelligent Transportation System
● Industrial Automation
● Security Surveillance
● New Energy and Utilities
● Data Center Network
● Electric Power Industry
● Smart City
[email protected] 1 www.upcomnet.com
Specification
Specification
Product Name 20-port Full Gigabit Rack-mount Managed layer3 Industrial Ethernet switch
Software performance
Support VRRP/EAPS
Technical specifications
IEEE802.3-10BaseT
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3x-Flow Control
Ethernet Standard
IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX
IEEE802.1ab
[email protected] 2 www.upcomnet.com
IEEE802.1D-Spanning Tree Protocol
Priority queue 8
VLAN ID 4096
Route Table 8k
Interface
Port numbers: 20
Gigabit ports Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port
Communication distance
Power Requirements
[email protected] 3 www.upcomnet.com
Full-load consumption <15W
Working Environment
Physical Characteristics
Installation 19" 1U rack mounted for front and rear outlet installation
Industry standard
EN61000-4-2(ESD), Level 4
EN61000-4-3(RS), Level 4
EN61000-4-4(EFT), Level 4
EMC
EN61000-4-5(Surge), Level 4
EN61000-4-6(CS), Level 4
EN61000-4-8, Level 5
Impact IEC60068–2-27
Falling IEC60068-2-32
Shock IEC60068-2-6
Warranty
Warranty 5 Years
[email protected] 4 www.upcomnet.com
Dimension
Order Information
Model NO. Description
ICS1020G-16G-4GS 16-port 10/100/1000M RJ45 + 4-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028-4GS 24-port 10/100M Base-T (x) +4-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028G-16G-8GC-4GS 16-port 10/100/1000M Base-T (x) +8 Gigabit Combo port +4-port Gigabit SFP, Layer 3
ICS1028G-8GC-20GS 8 Gigabit Combo port +20-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028G-16G-8GC-4TS 16-port 10/100/1000M Base-T (x) +8 Gigabit Combo port +4-port 10G SFP, Layer 3
Packing List
● Layer 3 Industrial Ethernet Switch *1
● User manual * 1
● Certificate of quality * 1
● Warranty card * 1
[email protected] 5 www.upcomnet.com