Features: • Compliant with IEEE Std 802.3bs and 802.3ck on 400Gbps Optical and Electrical Interfaces • Compliant with 400G-DR4 Optical Specifications • 4x53.125GBd PAM4 Electrical Interface • MPO-12 Receptacles • CMIS 5.0 Interface • Transmission Distance: Up to 500m SMF • Compliant with QSFP112 MSA • Single 3.3V Power Supply • Operating Temperature: 0 to 70 Celsius • RoHS Compliant and Lead-Free
Applications: • 400GBase Ethernet • Access and Enterprise
Product Description This Mellanox® QSFP112 transceiver provides 400GBase-DR4 throughput up to 500m over single-mode fiber (SMF) using a wavelength of 1310nm via an MPO connector. It is guaranteed to be 100% compatible with the equivalent Mellanox® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
ProLabs’ transceivers are RoHS compliant and lead-free.
TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.” Rev. 110424 Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Notes
Storage Temperature Tstg -40 85 °C
Operating Case Temperature Tc 0 25 70 °C Relative Humidity RH 15 85 % Supply Voltage Vcc -0.5 3.6 V Data Rate DR 53.125 Modulation Format PAM4
Electrical Characteristics Parameter Symbol Min. Typ. Max. Unit Notes
Power Supply Voltage Vcc 3.135 3.3 3.465 V
Power Supply Current Icc 2.55 A Power Dissipation PDISS 8 W Transmitter
Input Differential Impedance ZIN 100 Ω
Differential Data Input Swing VIN,pp 180 900 mVp-p Receiver
Output Differential Impedance ZOUT 100 Ω
Differential Data Input Swing VOUT,pp 300 850 mVp-p 1
Notes: 1. Internally AC coupled but requires a external 100Ω differential load termination. Optical Characteristics Parameter Symbol Min. Typ. Max. Unit Notes
Transmitter
Center Wavelength Range λC 1304.5 1317.5 nm
Side-Mode Suppression Ratio SMSR 30 dB Average Launch Power Per Lane P -2.9 4 dBm Outer Optical Modulation Amplitude OMAouter -0.8 4.2 dBm Per Lane Transmitter and Dispersion Penalty Eye TDECQ 3.4 dB Closure for PAM4 Per Lane Launch Power in OMAouter Minus -2.2 dBm TDECQ Per Lane (Minimum) Extinction Ratio ER 3.5 dB Average Launch Power of Off Transmitter Poff -15 dBm Optical Return Loss Tolerance ORLT 21.4 dB Transmitter Reflectance -26 dB Receiver
Lane Wavelengths Λ 1304.5 1317.5 nm
Receiver Sensitivity Per Lane (OMAouter) -4.4 dBm 1 Stressed Receiver Sensitivity (OMAouter) OMA -1.9 dBm 1 Per Lane Receiver Overload (Pavg) POL 4 dBm Damage Threshold POL 5 dBm Receive Power Per Lane (OMAouter) OMA 4.2 dBm Receiver Reflectance ORL -26 dB LOS De-Assert LOSD -10 dBm LOS Assert LOSA -16 dBm LOS Hysteresis 0.5 dB
Notes: 1. Measured with PRBS31Q test pattern @53.125GBd with PAM4 modulation and BER<2.4E-4. Pin Descriptions Pin Symbol Name/Description Plug Sequence Notes
1 GND Transmitter Ground (Common with Receiver Ground). 1 1
2 Tx2- Transmitter Inverted Data Input. 3 3 Tx2+ Transmitter Non-Inverted Data Output. 3 4 GND Transmitter Ground (Common with Receiver Ground). 1 1 5 Tx4- Transmitter Inverted Data Input. 3 6 Tx4+ Transmitter Non-Inverted Data Output. 3 7 GND Transmitter Ground (Common with Receiver Ground). 1 1 8 ModSelL Module Select. 3 9 ResetL Module Reset. 3 10 VccRx +3.3V Receiver Power Supply. 2 3 11 SCL 2-Wire Serial Interface Clock. 3 12 SDA 2-Wire Serial Interface Data. 3 13 GND Transmitter Ground (Common with Receiver Ground). 1 1 14 Rx3+ Receiver Non-Inverted Data Output. 3 15 Rx3- Receiver Inverted Data Output. 3 16 GND Transmitter Ground (Common with Receiver Ground). 1 1 17 Rx1+ Receiver Non-Inverted Data Output. 3 18 Rx1- Receiver Inverted Data Output. 3 19 GND Transmitter Ground (Common with Receiver Ground). 1 1 20 GND Transmitter Ground (Common with Receiver Ground). 1 1 21 Rx2- Receiver Inverted Data Output. 3 22 Rx2+ Receiver Non-Inverted Data Output. 3 23 GND Transmitter Ground (Common with Receiver Ground). 1 1 24 Rx4- Receiver Inverted Data Output. 3 25 Rx4+ Receiver Non-Inverted Data Output. 3 26 GND Transmitter Ground (Common with Receiver Ground). 1 1 27 ModPrsL Module Present. 3 28 IntL/RxLOS Interrupt. 3 2 29 VccTx +3.3V Transmitter Power Supply. 2 3 30 Vcc1 +3.3V Power Supply. 2 3 31 LPMode/TxDis Low-Power Mode. 3 32 GND Transmitter Ground (Common with Receiver Ground). 1 1 33 Tx3+ Transmitter Non-Inverted Data Input. 3 34 Tx3- Transmitter Inverted Data Output. 3 35 GND Transmitter Ground (Common with Receiver Ground). 1 1 36 Tx1+ Transmitter Non-Inverted Data Input. 3 37 Tx1- Transmitter Inverted Data Output. 3 38 GND Transmitter Ground (Common with Receiver Ground). 1 1 Notes: 1. QSFP112 uses common ground (GND) for all signals and supply (power). All are common within the QSFP DD module, and all module voltages are referenced to this potential unless otherwise noted. Connect these directly to the host board signal common ground plane. Each connector GND contact is rated for a maximum current of 500mA. 2. This is an open collector/drain output that, on the host board, requires a 4.7kΩ to 10kΩ pull-up resistor to the Host_Vcc. 3. VccRx, Vcc1, and VccTx shall be applied concurrently. For power classes 4 and above, the module differential loading of input voltage pads must not result in exceeding contact current limits. Each connector Vcc contact is rated for a maximum current of 1500mA.
Module Pad Layout
Recommended Host Board Power Supply Filter Network Mechanical Specifications About ProLabs Our experience comes as standard; for over 15 years ProLabs has delivered optical connectivity solutions that give our customers freedom and choice through our ability to provide seamless interoperability. At the heart of our company is the ability to provide state-of-the-art optical transport and connectivity solutions that are compatible with over 90 optical switching and transport platforms.
Complete Portfolio of Network Solutions
ProLabs is focused on innovations in optical transport and connectivity. The combination of our knowledge of optics and networking equipment enables ProLabs to be your single source for optical transport and connectivity solutions from 100Mb to 400G while providing innovative solutions that increase network efficiency. We provide the optical connectivity expertise that is compatible with and enhances your switching and transport equipment.
Trusted Partner Customer service is our number one value. ProLabs has invested in people, labs and manufacturing capacity to ensure that you get immediate answers to your questions and compatible product when needed. With Engineering and Manufacturing offices in the U.K. and U.S. augmented by field offices throughout the U.S., U.K. and Asia, ProLabs is able to be our customers best advocate 24 hours a day.
Contact Information ProLabs US Email: [email protected] Telephone: 952-852-0252
