Mining Excavator

R 9400

Operating Weight with

Backhoe Attachment:
345 tonnes / 380 tons
Shovel Attachment:
353 tonnes / 389 tons
Engine:
1,250 kW / 1,675 HP
Loading Capacity:
36.0 – 43.0 t / pass
18.0 – 26.0 m³
40.0 – 47.0 t / pass
23.5 – 34.0 yd³
R 9400 Productivity Efficiency
Operating Weight with Backhoe Attachment: Working Harder and Faster Moving More for Less
345 tonnes / 380 tons
Shovel Attachment:
353 tonnes / 389 tons
Engine:
1,250 kW / 1,675 HP
Loading Capacity:
36.0 – 43.0 t / pass
18.0 – 26.0 m³

40.0 – 47.0 t / pass

23.5 – 34.0 yd³

2 R 9400
 Reliability Customer Service Safety Environment
Ready to Work Worldclass Support, Protecting Your Most Mining Responsibly
When You Need It Everywhere, Every Day Important Assets

R 9400 3
 Productivity

Working Harder
and Faster
The R 9400 is built to outperform all competitors in the medium class mining market.
Boasting a 22.0 m³ / 28.8 yd³ bucket capacity in standard configuration, the R 9400 is the
ideal machine to load a fleet of 100 – 240 t mining trucks. Available in both diesel or electric
versions, the R 9400 offers the flexibility to perform many specific applications.

4 R 9400
Fast and High Digging
Precise Movement and Lifting Capabilities

Powerful Drive System High Digging Forces

The R 9400 is equipped with a Cummins diesel engine which Designed for the best mechanical force distribution, the
has been specifically adapted to withstand the most extreme production-tailored attachment delivers increased digging
environments and to reach the highest uptime performance and lifting forces. Integrating Liebherr-made cylinders and
for maximum productivity. The electric drive system provides a wide range of buckets with mining-optimized GET, the
superior performance when the machine is used in the toughest R 9400’s attachment ensures the highest forces, easy bucket
of conditions. penetration and high fill factor to perform even in the most
demanding conditions.
Fast Cycle Time
Rather than using a standard open hydraulic circuit, the R 9400 Power-Oriented Energy Management
employs a closed-loop swing circuit, enabling maximum swing The R 9400’s attachment is equipped with pressureless boom-
torque while retaining the full oil flow for the working circuit. down function to enable fast cylinder retraction without the
The independent swing circuit in combination with the powerful need for pump energy. Intelligent energy management diverts
drive system leads to fast arm motion, contributing to faster the pump flow during boom lowering, allowing other cylinder
cycle times. motions to operate unimpeded.

Precise Machine Motions

The R 9400 design integrates the Litronic Plus electronic control
system allowing for easy control even when simultaneous
movements are required. The patented Liebherr electronic
damping system provides controlled end-cushioning for
smooth attachment motions.

Engine / Electronic Cylinder Exclusive

Motor Options Damping System Bucket Solution
Diesel engine: • Patented system based on electronic control • Innovative Liebherr bucket design
• Cummins QSK 50 • Controlled end-cushioning for smooth to maximize bucket fill factor
• USA / EPA Tier 2 / Tier 4i Compliant attachment motions • Optimized Liebherr GET and wear package
• Fuel consumption optimized version (optional) • Allows the operator to focus on loading according to customer application
• Intelligent energy management • Ensures optimal penetration efficiency
Electrical motor (optional): • Increase of cylinders reliability • Single GET hammerless locking system
• 3 phase AC squirrel cage motor for safe and easy maintenance
• Voltage on request • Fully patented GET system design
• 50 or 60 Hz frequency for optimal penetration / lifetime
• Four tooth profile available for various
range of applications

R 9400 5
 Efficiency

Moving More
for Less
The R 9400 follows the Liebherr design philosophy of maximizing a machine’s performance
by improving the efficiency of all individual subsystems. Engineered for easy serviceability
the machine is designed to ensure maximum uptime. The R 9400’s spacious cab creates a
comfortable working environment, ensuring peak operator performance at every shift.

6 R 9400
Built for Comfortable Cab
Maximum Profitability for Efficient Work

Electro-Hydraulic System Efficiency Superior Operator Comfort

Liebherr hydraulic technology in combination with the precision The large and spacious cab provides ideal working conditions
of electronic control contributes to the R 9400’s efficient use of and optimal operator’s comfort. Mounted on silent blocks, the
energy. The high-pressure hydraulic system and the optimized cab design reduces vibrations and limits noise pollution to
pipe and hose layout maximize usable power transmission. provide a quiet working environment.
Hydraulic pumps are electronically managed to provide
optimal pressure compensation and oil flow management. The
hydraulic system is independently regulated over the engine
circuit for the best operational efficiency.

Independent Cooling System Extended

Oil and water cooling fans are independent and electronically
managed. The on-demand cooling control provides efficient Components Lifetime
power for the working process. This technology contributes to
maintaining sustainable temperature of all hydraulic components,
extending their life. The R 9400’s high pressure hydraulic oil filtration systems
remove contaminants from the fluid to offer the highest rate of
Closed Loop Swing Circuit hydraulic system efficiency. To maintain the oil quality, all return
All Liebherr Mining excavators are equipped with a closed loop hydraulic oil flow goes through a 15 / 5 μm fine filtration system,
swing circuit. Kinetic energy can be saved when the swing while the grease and fuel tanks are sized to considerably
motion is used during deceleration, to drive the main and extend the time between service intervals.
auxiliary pumps, reducing fuel consumption and allowing faster
boom lift motion.

Hydraulic Fast Comfort-Oriented

System Efficiency Maintenance System Cab Design
The R 9400’s hydraulic system is designed The service flap is hydraulically actuated and • Tinted laminated safety glass
for an optimized hydraulic power management accessible from the ground level allowing for • Armored front and attachment side windows
via the: fast maintenance: • Heavy duty sun louvers on windows
• Closed-loop swing circuit • Hydraulic oil refill • Adjustable air suspended seat
• Pressureless boom down function • Engine oil refill and drainage • A/C with dust filter in fresh air / recirculated
• Electronic hydraulic pumps management • Splitter box and swing gearbox oil exchange • Pressurization to prevent dust penetration
• High pressure hydraulic oil filtration system • Attachment / swing ring bearing • Trainer’s seat
• Electro-hydraulic control system grease barrel refilling with filters
• Optimized pipe and hose layout • Windshield washer water refilling
• Fast fuel refilling line

R 9400 7
 Reliability

Ready to Work
When You Need It
With over 50 years of innovative thinking, engineering and manufacturing excellence, Liebherr
sets the industry standard for advanced equipment design and technology tools to provide
the most up-to-date product, responding to requirements of mining customers.

8 R 9400
Quality: Long-lasting
the Liebherr Trademark Job Performances

Liebherr Components Integration Maximized Component Lifetime

As an OEM, Liebherr has built a solid reputation for its The R 9400 is equipped with an automatic single line lubrication
development and production of high quality strategic system for the entire attachment and swing ring. All greasing
mining components. The R 9400 integrates robust and points are suitably protected against external damages,
reliable mining optimized components that are developed, extending component life and ensuring constant performance
manufactured and controlled by Liebherr ensuring reliable over the excavator’s operational life.
performance for the entire machine.
Rugged Undercarriage Structure
Machine Reliability Survey The R 9400 is mounted on a heavy duty fatigue resistant
Based on years of experience and the systematic measurement undercarriage. The swing ring is reinforced to provide an
of key performance indicators of the machine behavior in improved superstructure weight distribution. Designed and
the field, the Liebherr Mining Reliability Engineering Group is built for both shovel and backhoe configurations, the enlarged
constantly seeking new ways to enhance reliability. undercarriage offers an efficient ground bearing pressure
management providing the necessary stability and reliability.
Quality Management Continuous Improvement
Liebherr quality begins during machine design and simulations.
Liebherr meets the highest standards for special selections
of steels and casting materials. Based on the expertise of
certified internal auditors and a highly qualified workforce, all
manufacturing process steps are devised to provide the most
comprehensive control, monitoring and traceability. Liebherr-
Mining Equipment Colmar SAS is ISO 9001 certified.

Arctic Package Strengthened Quality

(optional) Attachment Design Commitment
Designed for reliability in regions with Backhoe or face shovel attachments are • Liebherr-Mining Equipment Colmar, France,
temperatures of down to – 50 °C / – 58 °F: built to face all standard and specific applications: ISO 9001 certified
• Integrated into machine structure • Use of advanced welding techniques • Compliance of materials tested in laboratory
• Start up easily even at very low • Reinforced with strategically located • Quality control during the stages
temperatures castings in high stress areas of production
• Increases machine availability • Heat treatment to reduce residual stresses • Vertical integration practice
and component lifetime and increase fatigue life
• Optimum operator comfort even in harsh • Designed for maximum structure life
temperature conditions • Use of cutting-edge engineering tools such
• Facilitate machine servicing as Finite Element Analysis and Fatigue Life
Analysis

R 9400 9
 Customer Service

Worldclass Support,
Everywhere, Every Day
By partnering with our customers, Liebherr implements tailored solutions from technical
support, spare parts and logistics solutions to global maintenance for all types of equipment,
all over the world.

10 R 9400
Customer Support Remanufacturing Parts Business

International Service Organization Reduced Costs and Investment Performance

The Liebherr Service Support has always Over the course of a mining machine’s Using genuine Liebherr components
been an important focus for the company. lifetime, major components must be ensures the best interaction within
Complete service during all operating replaced to ensure continued safety, your machine, encouraging optimal
phases from machinery installation to productivity and reliability. The Liebherr performance and most effective machine
problem solving, spare parts inventory Mining Remanufacturing Program offers operation and you can be sure that you are
and technical service. Our service team customers an OEM alternative to pur- in line with the latest improvements and
is close to our customers, delivering the chasing brand new replacement com- updates on parts providing peaceofmind
best specific maintenance solution to ponents. Enabling customers to achieve as all major components are tracked in
reduce both equipment downtime and lowest possible equipment lifecycle the Liebherr Maintenance Management
repair costs. costs without compromising quality, per- System.
formance or reliability.
Complete Training Program Partnership
From fully trained technicians to a full Fast Availability Liebherr regularly reviews requirements
team of certified field service engineers, A international service network and for parts and components for individual
Liebherr commits to provide you with component facilities worldwide means machines, based on operating hours,
world class training. Dedicated to mining, that component repair services and consumption and planned maintenance,
the Liebherr training team provides exchange components are available to resulting in minimized down time for
maintenance staff training programs to customers regardless of their location. customers. With access to the Global
allow cost-efficient and safe operations. stock via all Liebherr Mining Warehouses,
you will improve productivity by having
the part you need, when you need it.

Liebherr Repair and Easy Access

Service Tools Remanufacturing Programs Parts Online
Liebherr delivers a wide range of service • Liebherr certified quality • Available any time anywhere
tools for excavator-specific maintenance • As-new warranty • User friendly interface
ensuring optimal working conditions no • OEM expertise • Online ordering
matter the size of the component. • Reduced costs and investment • Save time and money
• An OEM-certified solution • Fast availability
• Maximized machine uptime
• Cost-efficient maintenance
• Easy machine serviceability
• Uncompromising operational safety

R 9400 11
 Safety

Protecting Your Most

Important Assets
The Liebherr R 9400 provides uncompromising safety for operators and maintenance crews.
Equipped with the service flap accessible from the ground level and integrating wide open
accesses, the R 9400 allows quick and safe maintenance. The R 9400’s cab provides
numerous features for operator safety.

12 R 9400
Safety-First Efficient
Working Conditions Machine Protection

Safe Service Access Protection Against Fire Ignition

The R 9400 is fitted with ergonomic access for fast and safe The engine compartment integrates a bulkhead wall that
maintenance. All service points are within reach from one side separates the engine from the hydraulic pumps. This reduces
and at machine level. The R 9400’s upperstructure is accessible the risk of hydraulic oil entering the engine compartment. The
via a robust fixed ladder or via an optional hydraulic actuated turbochargers and exhaust systems are heat shielded, and all
45° stairway. the hydraulic hoses are made from a fire resistant material.

Secure Maintenance Automatic Fire Suppression System

All components have been located to allow for effortless The R 9400 can be equipped with a fully integrated fire
inspection and replacement. Numerous service lights are suppression, employing a dual agent solution to prevent and
strategically located in the service areas to sustain suitable protect the machine. The fire suppression system has both
maintenance conditions, day or night. Emergency stops have automatic and manual release capabilities, emergency stop
been strategically placed in the cab, engine compartment and devices are strategically located on the machine to be easily
at ground level. The R 9400 eliminates hazards to ensure a safe accessible in any case by the operator.
environment for the service staff during maintenance.

User Friendly Machine Commitment to

Maintenance Access Employees Safety
The machine is easily visible even by night Designed for safe access on the machine • Safe and protected access
or in extremely dusty working environments upperstructure via: to the components
thanks to: • A 45° powered stairway and catwalks • Major components centralized
• Eight long-range working halogen lights with handrails and perforated steps to be easily accessible
located on attachment, uppercarriage and • Walkways with slip-resistant surfaces • E-stops located for the operator
counterweight • Emergency egress with handrails in front and maintenance staff
• Xenon or LED lights in option of the excavator(xenon / LED in option) • Ground-level fluid maintenance hub
• Travel alarm system with light and buzzer • Rear and side vision system

R 9400 13
 Environment

Mining
Responsibly
Liebherr considers the conservation and preservation of the environment as a major challenge
for the present and future. Liebherr are considerate of environmental issues in designing,
manufacturing and managing machine structures, providing solutions that allow customers to
balance performance with environmental consciousness.

14 R 9400
Minimized Sustainable Design and
Impact on Life Manufacturing Process

Optimized Energy Consumption, Fewer Emissions Certified Environment Management Systems

The intelligent energy management system facilitates interaction Subject to the stringent European program for the regulation of
between the hydraulic system and engine output with the goal the use of chemical substances in the manufacturing process
of maximum performance with minimum consumption. In “Eco- (REACH*), Liebherr undertakes a global evaluation to minimize
Mode” setting, the machine is set up to reduce engine load, the impacts of hazardous material, pollution control, water
significantly improve fuel consumption and reduce emissions. conservation, energy and environmental campaigns.

Controlled Emission Rejection Extended Components and Fluids Lifetime

The R 9400 is powered by a high horsepower diesel engine Liebherr is constantly working on ways to extend component
which complies with the USA / EPA Tier 2 or Tier 4i emission life. Through the Exchange Components program, superior
limits. This power drive makes the R 9400 cost effective without lubrication systems and the reinforcement of parts under
compromising productivity and reduces the machines impact stress, Liebherr can reduce frequency of part replacement.
on the environment. The result minimizes environmental impact and lowers the
overall total cost of ownership.

*REACH is the European Community Regulation on chemicals and their safe use (EC 1907 / 2066)
It deals with the Registration, Evaluation, Authorization and Restriction of Chemical Substances.

Remanufacturing Sound Attenuation Kit Electric

Program (optional) Drive Version
• Second life for your major components Developed with the latest noise The electric drive system is an efficient
• Liebherr certified quality measurement technologies, this approach alternative to diesel engine allowing:
• Reduced environmental impact is based on both removal of noise at the • Less vibration resulting in higher
• Reduced costs and investment source and passive sound attenuation: component lifetime
• Noise-optimized fan regulation • Lower maintenance costs
• Larger and additional mufflers with • Less noise pollution
tail pipe absorbers • High motor efficiency
• Sound attenuation on louvers, • Maximum efficiency in cold climate
doors and walls conditions when combined with the Arctic Kit
• Additional high volume
sound attenuation boxes

R 9400 15
Technical Data

Engine Swing Drive

1 Cummins diesel engine Hydraulic motor 2 Liebherr axial piston motors
Rating per SAE J1995 1,250 kW (1,675 HP) at 1,800 rpm Swing gear 2 Liebherr planetary reduction gears
Model Cummins QSK50 Swing ring Liebherr, sealed triple roller swing ring, internal teeth
(USA / EPA Tier 2, Tier 4i or fuel consumption optimized Swing speed 0 – 3.9 rpm
setting) Swing-holding brake hydraulically released, maintenance-free, multi-disc
Type 16 cylinder turbocharged V-engine brakes integrated in each swing gear
after-cooler
separate water cooling circuits
common-rail
Bore / Stroke 159 / 159 mm / 6.26 / 6.26 in
Displacement 50.3 l / 3,069 in3 Hydraulic System
Engine cooling system fans driven via hydraulic piston motor Hydraulic pump
Air cleaner dry-type air cleaner with pre-cleaner, with automatic for attachment 4 variable flow axial piston pumps
dust ejector, primary and safety elements and travel drive
Fuel tank 6,908 l / 1,825 gal Max. flow 4 x 751 l/min. / 4 x 198 gpm
Electrical system Max. pressure 320 bar / 4,640 psi
Voltage 24 V for swing drive 2 reversible swashplate pumps, closed-loop circuit
Batteries 4 (+ 2) x 170 Ah / 12 V Max. flow 2 x 390 l/min. / 2 x 103 gpm
Alternator 24 V / 260 Amp Max. pressure 350 bar / 5,076 psi
Engine idling automatic engine idling Pump management electronically controlled pressure and flow manage-
Electronic engine engine power and speed sensing over the entire ment with oil flow optimisation
power management engine rpm range Hydraulic tank capacity 2,200 l / 581 gal
Hydraulic system capacity 4,200 l / 1,110 gal
Hydraulic oil filter 1 high pressure safety filter after each main pump
+ fine filtration of entire return flow (15 / 5 μm)
Hydraulic oil cooler 2 separate coolers, 2 temperature controlled fans
Electric Motor (optional) driven via hydraulic piston motor
1 electric motor
Power output 1,350 kW (1,810 HP)
Type 3-phase AC squirrel cage motor
Voltage 6,000 V, other voltage on request
Frequency 50 Hz (or 60 Hz) Electric System
Revolutions 1,500 rpm or 1,800 rpm Electric isolation easy accessible battery isolations
Motor cooling integrated air-to-air heat exchanger Working lights high brightness halogen lights:
Starting method inrush current limited to 2.2 full load current – 2 on working attachment
– 1 on RHS of uppercarriage
– 3 on LHS of uppercarriage
– 2 on counterweight
Xenon or LED lights in option
Electro-Hydraulic Controls Emergency stop switches at ground level, in hydraulic compartment, in engine
Servo circuit independent, electric over hydraulic proportional compartment and in operator cab
­controls of each function Electrical wiring heavy duty execution in IP 65 standard for operating
Emergency control via accumulator for all attachment functions with conditions of – 50 °C to 100 °C / – 58 °F to 212 °F
stopped engine
Power distribution via monoblock control valves with integrated primary
relief valves and flanged on secondary valves
Flow summation to attachment and travel drive
Control functions Uppercarriage
Attachment and swing proportional via joystick levers Design torque resistant designed upper frame in box-type
Travel proportional via foot pedals or hand levers construction for superior strength and durability
Bottom dump bucket proportional via foot pedals Attachment mounting parallel longitudinal main girders in box section
­construction
Machine access 45° access system with handrails on the cab side of
the uppercarriage, full controlled descent, in case of
emergency stop additional emergency ladder fitted
near the cab

16 R 9400
 Operator’s Cab Service Flap
Design resiliently mounted, sound insulated, large windows Design hydraulically actuated service flap, with lighting easily
for all around visibility, integrated falling object protec- accessible from ground level to allow:
tion FOPS – fuel fast refill
Operator’s seat suspended, body-contoured with shock absorber, – hydraulic oil refill
adjustable to operator’s weight – engine oil quick change
Cabin windows 20.5 mm / 0.8 in tinted armored glass for front window – splitterbox oil quick change
and 18 mm / 0.7 in for right hand side windows, all – swing gearbox oil quick change
other windows in tinted safety glass, high pressure – swing ring teeth grease barrel refilling via grease
windshield-washer system 75 l / 20 gal watertank, ­filter
­aluminium sun louvers on all windows – attachment / swing ring bearing grease barrel
Heating system / heavy duty, fully automatic, high output air conditioner ­refilling via grease filter
Air conditioning and heater unit – windshield wash water refilling
Cabin pressurization ventilation with filter other coupler type on request
Controls joystick levers integrated into armrest of seat
Monitoring via LCD-Display, data memory
Rear vision system camera installation on counterweight and right-hand
side of the uppercarriage, displayed over an additional
LCD-display Central Lubrication System
Automatic engine shut off engine self-controlled power limitation and shut off Type single-line lubrication system for the entire attach-
Destroking of main pumps in case of low hydraulic oil level ment / swing ring bearing and teeth
Safety functions additional gauges with constant display for: engine Grease pumps 1 hydraulic grease pump for the attachment / swing
speed, hourmeter, voltmeter, safety mode for engine ring bearing and 1 hydraulic grease pump for swing
speed control and pump regulation ring teeth
Noise level (ISO 6396) Diesel: LpA (inside cab) = 78 dB(A) Capacity 200 l / 53 gal bulk container for attachment / swing
with oil / water fans at 100 % and AC fan at 65 % ring bearing, separated 80 l / 21 gal container for
swing ring teeth
Refill via the service flap for both containers, fill lines with
grease filter

Undercarriage
Design 3-piece undercarriage, box-type structures for center
piece and side frames (stress relieved steel work
­component as a standard) Attachment
Hydraulic motor 2 axial piston motors per side frame Design box-type structure with large steel castings in all high-
Travel gear Liebherr planetery reduction gear stress areas
Travel speed 0 – 2.7 km/h / 0 – 1.67 mph Stick wear protection underneath lower beam plate
Parking brake spring engaged, hydraulically pressure released Pivots sealed with double side centering with 1 single floating
­external wet multi-disc brakes for each travel motor, pin per side, all bearings with wear resistant steel
maintenance-free bushings, bolts hardened and chromium-plated
Track components maintenance-free, forged double grouser pad, Hydraulic cylinder Liebherr design and made, all cylinders located in well
­tractor-type chain, optional maintenance-free dual pin protected areas
cast link and pad combined Hydraulic connections pipes and hoses equipped with SAE split-flange
Track rollers / Carrier rollers 9 / 2 per side frame ­connections
Track tensioner pressurized hydraulic cylinder with accumulator and Pivots bucket-to-stick O-ring sealed and completely enclosed
grease adjuster Pivots bucket-to-link
Transport undercarriage side frames are removable Lubrication connected to the centralized lubrication system,
each lubrication point independently lubricated
Kinematics Liebherr parallel face shovel attachment geometry,
backhoe bucket pivoting angle 150°, electronic
­controlled end-cushioning

R 940017
Dimensions

F E A2
D A1
A

W1
W H3 C
OEL H1 H2
H

K P
Q
R0357
L N
U S
Z B
V G
X

mm / ft in mm / ft in
A 6,405 / 21'   K 2,434 /   7'11"
A1 7,184 / 23' 6" L 6,640 / 21' 8"
A2 7,900 / 25'10" N 1,000 /   3' 3"
B 6,516 / 21' 4" P 2,455 /   8'  
C 7,957 / 26' 1" Q 1,049 /   3' 4"
D 6,400 / 20'11" S 5,516 / 18' 1"
E 6,665 / 21'10" U 8,839 / 29'  
F 3,100 / 10' 2" V 13,279 / 43' 6"
G 7,036 / 23' 1" W 8,421 / 27' 7"
H 5,664 / 18' 6" W1 9,243 / 30' 3"
H1 6,653 / 21' 9" X 18,560 / 60'10"
H2 7,227 / 23' 8" Z 10,657 / 34'11"
H3 8,343 / 27' 4" OEL Operator’s eye level 6,740 / 22' 1"

F E A2
D A1
A

W1 H3 C
W OEL H1 H2
H

K P
Q
R0356
L N
U S
Z B
V G
X

mm / ft in mm / ft in
A 6,405 / 21'   K 2,434 /   7'11"
A1 7,184 / 23' 6" L 6,640 / 21' 8"
A2 7,900 / 25'10" N 1,000 /   3' 3"
B 6,516 / 21' 4" P 2,455 /   8'  
C 7,957 / 26' 1" Q 1,049 /   3' 4"
D 6,400 / 20'11" S 5,516 / 18' 1"
E 6,665 / 21'10" U 8,839 / 29'  
F 3,100 / 10' 2" V 16,400 / 53' 9"
G 7,036 / 23' 1" W 6,800 / 22' 3"
H 5,664 / 18' 6" W1 8,100 / 26' 6"
H1 6,653 / 21' 9" X 20,600 / 67' 6"
H2 7,227 / 23' 8" Z 10,657 / 34'11"
H3 8,343 / 27' 4" OEL Operator’s eye level 6,740 / 22' 1"

18 R 9400
Backhoe Attachment
with Mono Boom 9.30 m / 30'6"

ft m
Digging Envelope
55 R0355
Stick length 4.20 m / 13'8"
16
50 Max. digging depth 9.30 m / 30'5"
45 14 Max. reach at ground level 16.30 m / 53'5"
R 3570 Max. dumping height 10.60 m / 34'8"
40 12 Max. teeth height 15.70 m / 51'5"
35
10
30 Max. digging force (ISO 6015) 965 kN / 216,940 lbf
8 Max. breakout force (ISO 6015) 1,000 kN / 224,809 lbf
25
20 6
15
10
4
Operating Weight and Ground Pressure
2
5 The operating weight includes the basic machine with backhoe attachment and backhoe
0 0 bucket 22.00 m3 / 28.8 yd3.
-5 Pad width mm / ft in 1,000 / 3'3"
-2
-10
Weight kg / lb 345,500 / 760,600
-4 Ground pressure* kg/cm2 / psi 2.33 / 33.11
-15
* according to ISO 16754
-20 -6

-25 -8
-30
-10
20 18 16 14 12 10 8 6 4 2 0 m

65 60 55 50 45 40 35 30 25 20 15 10 5 0 ft

Backhoe Buckets for Machine in Standard Configuration

For materials class according to VOB, Section C, DIN 18300 <5 5–6 5–6 5–6 7–8 7–8
Typical operation according to VOB Section C, DIN 18300 GP HD HD HD XHD XHD
Capacity ISO 7451 m3 24.00 18.00 22.00 24.00 18.00 20.00
yd3 31.4 23.5 28.8 31.4 23.5 26.2
Suitable for material up to a specific weight of t/m3 1.7 2.2 1.8 1.6 2.0 1.8
lb/yd3 2,867 3,710 3,035 2,698 3,373 3,035
Cutting width mm 3,900 3,400 3,700 3,900 3,400 3,700
 ft in 12'9" 11'1" 12'1" 12'9" 11'1" 12'1"
Weightkg 22,000 23,000 23,000 23,800 24,500 25,000
lb 48,502 50,706 50,706 52,470 54,013 55,116

Backhoe Buckets for Machine with High Performance Option

For materials class according to VOB, Section C, DIN 18300 <5 5–6 5–6 5–6 7–8 7–8
Typical operation according to VOB Section C, DIN 18300 GP HD HD HD XHD XHD
Capacity ISO 7451 m3 26.00 20.00 24.00 26.00 20.00 22.00
yd3 34.0 26.2 31.4 34.0 26.2 28.8
Suitable for material up to a specific weight of t/m3 1.7 2.2 1.8 1.6 2.0 1.8
lb/yd3 2,867 3,710 3,035 2,698 3,373 3,035
Cutting width mm 3,900 3,700 3,700 3,900 3,700 3,700
 ft in 12'9" 12'1" 12'1" 12'9" 12'1" 12'1"
Weightkg 20,500 20,700 21,500 22,300 23,000 23,500
lb 45,195 45,636 47,400 49,163 50,706 51,809
GP: General purpose bucket with Liebherr Z140 teeth
HD: Heavy-duty bucket with Liebherr Z140 teeth
XHD: Heavy-duty rock bucket with Liebherr Z140 teeth

R 940019
Face Shovel Attachment
with Shovel Boom 6.75 m / 22'1"

ft m
18
Digging Envelope
R0354
17 Stick length 4.30 m / 14' 1"
55
16 Max. reach at ground level 14.00 m / 45'11"
50 R 3750 Max. dumping height 11.20 m / 36' 8"
15
14 Max. crowd length 4.50 m / 14' 9"
45
13 Bucket opening width T 2.50 m /   8' 2"
40 12
11 Crowd force at ground level (ISO 6015) 1,145 kN / 257,406 lbf
35 T
10 Max. crowd force (ISO 6015) 1,545 kN / 347,330 lbf
30 9 Max. breakout force (ISO 6015) 1,195 kN / 268,646 lbf
8
25
7
20 6
5 Operating Weight and Ground Pressure
15
4
The operating weight includes the basic machine with shovel attachment and bucket
10 3
22.00 m3 / 28.8 yd3.
2
5
2 Pad width mm / ft in 1,000 / 3'3"
0 0 Weight kg / lb 353,000 / 778,200
-1 Ground pressure* kg/cm2 / psi 2.38 / 33.83
-5
-2 * according to ISO 16754
-10 -3
-4
-15
-5
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m

50 45 40 35 30 25 20 15 10 5 0 ft

Face Shovel Buckets

For materials class according to VOB, Section C, DIN 18300 <5 <5 5–6 5–6 7–8 7–8
Typical operation according to VOB Section C, DIN 18300 GP GP HD HD XHD XHD
Capacity ISO 7451 m3 24.00 22.00 18.00 22.00 18.00 19.00
yd3 31.4 28.8 23.5 28.8 23.5 24.9
Suitable for material up to a specific weight of t/m3 1.6 1.8 2.2 1.8 2.1 1.9
lb/yd3 2,698 3,035 3,710 3,035 3,541 3,204
Cutting width mm 4,250 4,250 4,250 4,250 4,250 4,250
 ft in 13'11" 13'11" 13'11" 13'11" 13'11" 13'11"
Weightkg 36,700 35,400 35,400 35,400 37,500 38,500
lb 80,910 78,044 78,044 78,044 82,673 84,878
GP: General purpose bucket with Liebherr Z140 teeth
HD: Heavy-duty bucket with Liebherr Z140 teeth
XHD: Heavy-duty rock bucket

20 R 9400
Optional Equipment

Undercarriage Operator’s Cab

Monoblock chain system 4-point seat belt
Undercarriage bottom cover Additional back and side wipers
Rock protection for idler wheel Double A/C system
Front protective grid

Uppercarriage
Banlaw fast fueling system Attachment
Fueling system with Multiflo Hydrau-Flo® Piston rod guard for bucket cylinders
Wiggins / Banlaw counter plugs for fuel / lube trucks High performance option
Slewing ring with 90° installation arrangement
Swing ring scrapers
Xenon lighting
LED lighting
Additional halogen working lighting Specific Solutions
Additional service lighting Arctic package (– 30 °C / – 22 °F, – 40 °C / – 40 °F)
Greasing system with two grease pumps Sound attenuation package (until + 40 °C / + 104 °F)
High altitude kit

Hydraulic System
Oil cooler inlet screens Safety
Automatic fire suppression system

Engine
Fuel consumption optimized engine version (Tier non-certified) General
Cold application start aid Maritime transport packaging
Automatic engine shutdown timer (5 min.)

R 940021
The Liebherr Group of Companies

All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
Wide Product Range State-of-the-art Technology
The Liebherr Group is one of the largest construction equipment To provide consistent, top quality products, Liebherr attaches
manufacturers in the world. Liebherr’s high-value products and great importance to each product area, its components and
services enjoy a high reputation in many other fields. The wide core technologies. Important modules and components are
range includes domestic appliances, aerospace and trans- developed and manufactured in-house, for instance the entire
portation systems, machine tools and maritime cranes. drive and control technology for construction equipment.

Exceptional Customer Benefit Worldwide and Independent

Every product line provides a complete range of models in many Hans Liebherr founded the Liebherr family company in 1949.
different versions. With both their technical excellence and Since that time, the enterprise has steadily grown to a group of
acknowledged quality, Liebherr products offer a maximum of more than 130 companies with over 41,000 employees located
customer benefits in practical application. on all continents. The corporate headquarters of the Group is
Liebherr-International AG in Bulle, Switzerland. The Liebherr
family is the sole owner of the company.

www.liebherr.com

Printed in Germany by Eberl RG-BK LEC/SP 11003238-1-03.16_enGB-US

Liebherr-Mining Equipment Colmar SAS

49 rue Frédéric Hartmann, FR-68025 Colmar Cedex
S +33 369 49 20 00, Fax +33 369 49 23 18
www.liebherr.com, E-Mail: [email protected]
www.facebook.com/LiebherrMining