Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    Aluminum Edge Specs

    Uploaded by

    megalux501

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aluminum Edge Specs

    Uploaded by

    megalux501
    2 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views1 page

    Aluminum Edge Specs

    Uploaded by

    megalux501

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    protected with reinforced green rubber garden hose.

    Cables spaced at 120degree


    spacing around the tree.

    B. Palm Bracing: Battens or blocks, struts, straps, and protective padding.


    1. Battens or Blocks and Struts: Rough-sawn, new hardwood, free of knots, holes, cross
    grain, and other defects, 50 x 100mm nominal by lengths indicated on drawings.
    2. Braces: 100x100mm at length to suit 60 degree angle to strut, nailed at mid point and
    placed at 120degree spacings around trunk.
    3. Straps: Adjustable steel package banding.
    4. Padding: 5 layers of Burlap.

    2.7 LANDSCAPE EDGINGS

    A. Aluminum Edging: Standard-profile extruded-aluminum edging, ASTM B 221M, Alloy


    6063-T6, fabricated in standard lengths with interlocking sections with loops stamped from
    face of sections to receive stakes.
    1. Basis-of-Design Product: Subject to compliance with requirements, or comparable
    product by one of the following:
    a. Permaloc Corporation.
    2. Edging Size: 3.2mm x 100mm.
    3. Stakes: Aluminum, ASTM B 221M, Alloy 6061-T6, approximately 38 mm wide by
    305 mm long.
    4. Finish: Mill (natural aluminum) .

    B. Plastic Edging: Standard black polyethylene or vinyl edging, V-lipped bottom , extruded in
    standard lengths, with 225-mm stakes.
    1. Basis-of-Design Product: Subject to compliance with requirements, or comparable
    product by one of the following:
    a. Oly-Ola Edgings, Inc.
    2. Edging Size: 2.5 mm thick by 125 mm deep .
    3. Top Profile: Round top, 25 mm in diameter.
    4. Accessories: Manufacturer's standard alignment clips or plugs.

    2.8 TREE GRATES

    A. Basis-of-Design Product: Subject to compliance with requirements, or comparable product


    by one of the following:
    1. Benito.com - Brico Tree Protector

    B. Shape and Size: 1800x1800x200mm

    C. Material: Ductile Iron.

    D. Finish: Natural.
    1. Color: Natural.

    2.9 MISCELLANEOUS PRODUCTS

    A. Wood Pressure-Preservative Treatment: AWPA U1, Use Category UC4a; acceptable to


    authorities having jurisdiction, and containing no arsenic or chromium.

    PLANTS 329300 - Page 11 of 21

    You might also like