Price Bid
Price Bid
Price Bid
CONSTRUCTION OF HEALTH CENTER AT MOJE- GABHENI, R.S.NO. 218/PAIKEE (AMENITIES SPACE) IN SOUTH
ZONE-B (KANAKPUR),SURAT
SCHEDULE-B
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
WORK UP TO PLINTH LEVEL
Page 1 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing, mixing, placing, compacting by machine vibrator,
curing, testing M25 Design mix concrete as per IS 456:2000
7 (latest revision) and as per tender specification in all items
including cost of form work and rendering but excluding cost of
reinforcement
(A) COLUMNS:
(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74 0.00
(2) Having cross sectional area more than 0.085 sq. mt .up to
0.00 C.M. 11136.62
0.12 sqmt. 0.00
(3) Having cross sectional area more than 0.12 sq. mt. 18.00 C.M. 9190.79 165434.22
(SOR SMC - MIX DESIGN PG. NO-14)
(B) Beam:
(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86 0.00
(2) Having cros sectional area more than 0.08 sq. mt and upto
4.00 C.M. 8075.85
0.12 sq.mt. 32303.40
(3) Having cross sectional area more than 0.12 sq. mt . 33.50 C.M. 6999.09 234469.52
(SOR SMC - MIX DESIGN PG. NO-14)
Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed
8 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from
work in: wall caps/ copings
(SOR SMC Pg No. 9 It No. 97) 5.50 C.M. 3982.62 21904.41
Providing & fixing IS Mark TMT Bar FE 500d reinforcement for
9 R.C.C. work incl. bending, binding & placing in position etc.comp.-
--
Upto G.L./P.L. 19703.00 Kg. 76.21 1501565.63
(SOR SMC Pg No. 1 It No. 8)
Providing & construction brick work using Fly Ash bricks having
10 crushing strength not less than 35 Kg./sq.cm. in foundation &
plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor
(SOR SMC Pg No. 2 It No. 16) 43.50 C.M. 4511.97 196270.70
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in
11
depth consolidating each
disposited layer by ramming and watering.
(SOR SMC Pg No. 1 It No. 10) 749.00 C.M. 130.39 97662.11
Filling in foundation and plinth with murrum or selected soil in
12 layers of 20cm. thickness including watering, ramming and
consolidating etc. complete.
(SOR SMC Pg No. 1 It No. 11) 218.00 C.M. 289.06 63015.08
carrying out plinth treatment to post construction/existing
structure by spraying chemical solution for termite control
treatment including labour and material consisting with ISI
specification using chlordene and chiorpurfiles 20 EC as per
13 6131_part II concentration weight one litter give 1% 368.00 S.M. 82.89 30503.52
concentration inclusive of one litter chemicals emulsions
application at the rate of 5 litter chemicals /sqmt of surface is
recommended as per IS.
Page 2 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & Applying 20mm. Th. Heavy Roller plaster on walls or
similar surfaces at all floor levels consisting of 12 mm av. Th.
Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing
14 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and
apply roller horizontal as well as vertical ( two times ) up to good
quality and size of grain in elevation as per directed by engineer
incharge.
(SOR SMC Pg No. 3 It No. 28) MR 83.00 S.M 324.00 26892.00
Providing & applying two coats of weather shield max paint (3
coats may be required in case of darker colours.)of ICI Dulux or
Apex Ultima of Asian Paint including applying exterior acrylic
primer coat as per manufacturers specification and directions in
shade and colour approved by architects, on exterior surfaces of
the building including scaffolding, preparing the surface,
watering, curing etc. complete and as directed by the architects
and manufacturers
Surface Preparation : surface is thoroughly clean, dry and free
from all loose dirt, chalk, grease, fungi,algae and flaking paint.
15
This can be achieved by brushing with a wire/ stiff coir brush,
followed by water jetting if required. Fill up all minor cracks and
defects with white cement and sand mixture in the ratio 1:3. For
application on previously painted wall, previous coatings of paint
must be thoroughly scraped off and Clean the surface thoroughly
using wire brushes.
Priming: Apply a liberal coat of exterior acrylic primer and allow
it to dry for 4-5 hours.Application of putty is not recommended.
Minimum 4-6 hours duration is required between each coat of
weather shield max paint
SMC SOR , COLOR WORK ITEM NO.- 17 Page No. 16 83.00 S.M 82.00 6806.00
(2) Having cross sectional area more than 0.085 sq. mt .up to
0.12 sqmt.
Ground Floor 0.00 C.M. 11136.62 0.00
First Floor 0.00 C.M. 11176.22 0.00
Page 3 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Terrace Floor 0.00 C.M. 11215.82 0.00
(B) Beam:
(1) Having cross sectional area upto 0.08 sq.mt.
Ground Floor 0.00 C.M. 8994.86 0.00
First Floor 0.00 C.M. 9034.46 0.00
Terrace Floor 0.00 C.M. 9074.06 0.00
(2) Having cros sectional area more than 0.08 sq. mt and upto
0.12 sq.mt.
Ground Floor 3.00 C.M. 8075.85 24227.55
First Floor 3.00 C.M. 8115.45 24346.35
Terrace Floor 2.50 C.M. 8155.05 20387.63
(C) Slab:
(1) Slabs having more than 8 Cm & upto 10 Cm thickness.
Ground Floor 0.00 C.M. 7887.74 0.00
First Floor 0.00 C.M. 7927.34 0.00
Terrace Floor 0.00 C.M. 7966.94 0.00
(D) Lintels:
Ground Floor 2.50 C.M. 9419.25 23548.13
First Floor 1.50 C.M. 9458.85 14188.28
Terrace Floor 0.50 C.M. 9498.45 4749.23
(SOR SMC - MIX DESIGN PG. NO-14)
(E) Chhajja
Ground Floor 4.50 C.M. 6913.25 31109.63
Page 4 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
First Floor 2.50 C.M. 6952.85 17382.13
Terrace Floor 1.50 C.M. 6992.45 10488.68
(SOR SMC - MIX DESIGN PG. NO-14)
Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed
17 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from
work in: wall caps/ copings
(SOR SMC Pg No. 9 It No. 97) 8.50 C.M. 3982.62 33852.27
Providing, mixing, placing, compacting by machine vibrator,
curing, testing M25 Design mix concrete as per IS 456:2000
18 (latest revision) and as per tender specification in all items
including cost of form work and rendering but excluding cost of
reinforcement
(A) Stair cases including landing etc.
Ground Floor 7.00 C.M. 7158.83 50111.81
First Floor 7.00 C.M. 7198.43 50389.01
(SOR SMC - MIX DESIGN PG. NO-14)
(B) Vertical and horizontal fins
Ground Floor 3.00 C.M. 9030.72 27092.16
First Floor 3.00 C.M. 9070.32 27210.96
Terrace Floor 3.00 C.M. 9109.92 27329.76
(SOR SMC - MIX DESIGN PG. NO-14)
Providing & fixing IS Mark TMT Bar FE 500d reinforcement for
19 R.C.C. work incl. bending, binding & placing in position etc.comp.-
--
Ground Floor 18895.00 Kg 76.21 1439987.95
First Floor 18540.00 Kg 77.21 1431473.40
Terrace Floor 6675.00 Kg 78.21 522051.75
Stair Cabin Top 128.00 Kg 79.21 10138.88
(SOR SMC Pg No. 2 It No. 15)
Brick work using common burnt clay building bricks having
20 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar
1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks
Ground Floor 59.00 C.M. 4511.97 266206.23
First Floor 46.00 C.M. 4786.95 220199.70
Terrace Floor 35.50 C.M. 5061.92 179698.16
Stair Cabin Top 13.00 C.M. 5379.24 69930.12
(SOR SMC Pg No. 2 It No. 16)
Half brick masonry in common brunt clay building bricks having
crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar
21 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (C)Fly Ash Bricks
Ground Floor 320.00 S.M. 678.86 217235.20
First Floor 345.00 S.M. 685.11 236362.95
Terrace Floor 0.00 S.M. 691.37 0.00
(SOR SMC Pg No. 2 It No. 17)
Providing & Applying 10mm.th.cement plaster in single coat on
brick/ concrete walls similar surfaces for plastering & finished
22 even & smooth with a floating coat of cement slurry mixed with
admixture of lime or neeru in required proportion etc. comp. in
C.M 1:3 (1 cement : 3sand)
Page 5 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
(A) for wall and similar surfaces
Ground Floor 1174.00 S.M 189.79 222813.46
First Floor 1129.00 S.M 217.93 246042.97
Terrace Floor 236.00 S.M 246.07 58072.52
LMR Floor 67.00 S.M 274.20 18371.40
(B) for ceilings and soffits of stairs
Ground Floor 356.00 S.M 214.60 76397.60
First Floor 312.00 S.M 242.74 75734.88
Terrace Floor 80.00 S.M 270.88 21670.40
(SOR SMC Pg No. 3 It No. 24)
Providing and fixing 150 mm wide, approved quality chicken wire
mesh (FRP / PVC) at junction of brick work and RCC work or two
23 dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag
by cement mortar 1:3 before applying the plaster, including
curing, scaffolding all complete as directed.
Ground floor 77.00 S.M. 102.00 7854.00
First floor 73.00 S.M. 102.00 7446.00
Terrace Floor 20.00 S.M. 102.00 2040.00
(SOR SMC Pg No. 11 It No. 124)
Providing & Applying 20mm. Th. Heavy Roller plaster on walls or
similar surfaces at all floor levels consisting of 12 mm av. Th.
Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing
24 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and
apply roller horizontal as well as vertical ( two times ) up to good
quality and size of grain in elevation as per directed by engineer
incharge.
Ground Floor 419.00 S.M 324.00 135756.00
First Floor 324.00 S.M 324.00 104976.00
Terrace Floor 211.00 S.M 324.00 68364.00
LMR Floor 34.00 S.M 324.00 11016.00
(SOR SMC Pg No. 3 It No. 28) MR
Providing throating or plaster drip and moulding it to R.C.C.
25 chajja etc.comp.. For all floor
Ground Floor 84.50 R.M 41.66 3520.27
First Floor 39.50 R.M 41.66 1645.57
(SOR SMC Pg No. 3 It No. 29)
Providing 20 mm deep finished groove in plaster in line and
26
level etc. Comp. For all Floor (M.R.)
Ground Floor 156.00 R.M 50.00 7800.00
First Floor 156.00 R.M 50.00 7800.00
(SOR SMC Pg No. 3 It No. 30) MR
Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in
flooring treads of steps and landing laid on a bed of 12mm thick
27
cement mortar 1:3 (1 cement : 3 coarse sand) finishing with
flush pointing in white cement.
Ground Floor 265.00 S.M 1040.35 275692.75
First Floor 260.00 S.M 1040.35 270491.00
Terrace Floor 42.00 S.M 1040.35 43694.70
(SOR SMC Pg No. 4 It No. 44)
Page 6 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in
skrting risers of steps and dedo on 10mm thick cement plaster
28 1:3 (1 cement : 3 coarse sand) and jointed with white cement
slurry.
Providing and laying polished Kota stone slab flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse
sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and
30 jointed with grey cement slurry mixed with pigment to match the
shade of slab including rubbing and polishing etc. complete. (A)
25mm thick
Page 8 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing and fixing window having extruded aluminium colour
anodized section frame main outer size 63.50 x 38.10 x1.95 mm
(of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two
track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal
section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size
61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @ wt.
of 0.659 kg/mt) with sliding shutters of horizontal member size
37 1705.67
40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of
.456 Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm
(of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948,
@ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour
tineted float glass with powder coated aluminium fittings and
fixtures and transparent silicon sealant glass fixing to frame as
per details etc. complete for window.For all Floors. 0.00 S.M 0.00
(A) Same as above but colour anodized 9.00 S.M 1705.67 15351.03
SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17
Providing and fixing window having extruded aluminium colour
anodized section frame main outer size 95 mm x 24 mm x 1.17
mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal
Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal
section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92
mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt.
38 1.06 Kg/mt) with sliding shutters of horizontal member size 40 1591.87
mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of
0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm
(of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick
transparent bronze colour tinted float glass with powder coated
aluminium fittings & fixtures and transparent silicon sealant glass
fixing to frame as per details etc. 0.00 S.M 0.00
(A) Same as above but colour anodized
All Floor 57.00 S.M 1591.87 90736.59
SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17
Providing and fixing standared extruded ofalluminium section of
size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour
39 Powder Coated alluminium frame for ventilation with 5 mm thick 2414.00
frosted glass as details etc complete for Ventilation
0.00 S.M 0.00
All Floor
A) Same as above but Colour anodized 8.50 S.M 2414.00 20519.00
SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR
Providing & laying granite slab 18 mm thick in Window-Door
seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1
Cement: 4 Coarse sand) with necessary adhesive material and
40
finished with flush pointing in white or colour cement, including
rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all
Floors.
For all Floors. 145.00 S.M 2026.00 293770.00
Page 9 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
SMC SOR , PAGE No.4 ITEM NO.41 MR
41 Labour Charges For Edge Finished For Granite for all floors
For all Floors. 958.00 R.M 43.43 41605.94
SMC SOR, PAGE No.4 ITEM NO.42
Providing & fixing Powder Coated Aluminium partly glazed and partly
panelled partition using medium duty sections of Hindalco,Zindal,
Narmada, Banco or Equivalent approved make having section 63.50
mm x 38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt),
Galzing Clip with 5 mm thick clear float glass of approved make
including all other necessary fittings and fixtures. Entire work will have
42
to be made water proof using necessary rubber sectioned wherever
required. Gaps all round the frame to be filled with approved water
proof sealent. Bottom portion of doors both side to be covered with
12mm thick prelaminated particle board of approved make and quality
and as per design.
Page 10 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required) and
fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories &
46 stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist slab
with suitable arrangement as per approval of Engineer-incharge,
(for payment purpose only
weight of stainless steel members shall be considered excluding
fixing accessories such as nuts, bolts, fasteners etc.)
SMC SOR, ITEM NO 120,Pg No.11, MR 645.00 Kg. 450.00 290250.00
(1) The whole work is to be executed through specialized agency
with a guarantee of 10 (Ten) years given on a prescribed
47
proforma duly stamped (2) The rate shall include for work at all
floors & conducting water proof test as directed. (M.R.)
B) Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc. consisting of
following operations. (a) Applying and grouting a slurry coat of
neat cement using 2.75 kg/sqm of cement admixed with
proprietary water proofing compound comforming to IS:2645
over the R.C.C. slab including cleaning the surface before
tratment.(b) Laying cement concrete using broken bricks/brick
bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1
Cement : 5 Coarse sand) admixed with proprietary water
proofing compound conforming to IS:2645 ,brick bats is finally
covered by jointless cement plaster 20mm th. in C.M. 1:4 added
with special water proofing compound confirming to IS:2645 &
top smooth finished with trowel with false chequered marking of
300 mm.size.The treatment is carried along the vertical surface
of the parapet & other adjoining wall up to height of about 300
mm in a shape of quarter round vata Incl. curing etc. Comp. With
average thickness of 120 mm and minimum thickness at khurra
as 65 mm.
(c) The whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final test. All
above operations to be down in order and as directed and
specified by the engineer-in-charge. With average thickness of
120 mm and minimum thickness at khurra as 65 mm. (Cement
consumption 0.511 Bags / S.M.)
Page 11 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Terrace and staircabin top 410.00 S.M 511.00 209510.00
SMC SOR, PAGE NO 6 IT NO 62 B M.R.
(A) Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C.,kitchen and
the like consisting of :
(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with
water proofing compound conforming to IS : 2645 in
recommended proportions.
(b) II course of a layer of plaster in C.M. 1:3 with water proofing
compound confirming to IS:2645 about 25 mm. th' in the floor of
the depression & about 18mm th' On the side walls of the
depression up to the floor level, water proofing plaster about 18
mm. th' be continued on the walls above the floor level for a
height of 600 mm. with surface suitable to receive further
treatment
(c) Finishing top with stone aggregate 10mm to 12mm nominal
size spreading @0.008 C.M./S.M., thoroughly embedad in plaster
layer.
as per specifications & instructions of Engineer in charge
(Cement consumption 0.316 Bags / S.M.)
For all Floors 72.00 S.M 296.00 21312.00
SMC SOR, PAGE NO 6,IT NO 62 B M.R.
Providing and laying broken china mosaic flooring for terrace
using 12 mm to 20 mm broken pieces of glased tiles of to be laid
over cementr morter 1:3 to plain or slope and to be tempered to
48
bring morter crème out up to surface using white cement
including grounding off jnctions and extending them up to 15 cm
along the wall, clearing with water and oxalic acid etc as directed.
SMC SOR, PAGE NO 12 IT NO 131 410.00 S.M 747.29 306388.90
Apply two coats of putty and two coats of primer of approved
brand and manufacture on new wall surface to give an even
49
shade including thoroughly brushing the surface free from
mortar dropping and other matter and sand papered smooth.
(A) for wall and similar surfaces
For all Floors 2606.00 S.M 40.59 105777.54
(B) for ceilings and soffits
For all Floors 748.00 S.M 40.59 30361.32
SMC SOR ,coiour works,Pg No.15,item no.-4
Wall painting (two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated wall surface to
50 give an even shade including throughly brushing the surface free
from mortar droppings and other foreign matter and sand
papered smooth.
(A) for wall and similar surfaces
For all Floors 2606.00 S.M 79.39 206890.34
(B) for ceilings and soffits
For all Floors 748.00 S.M 79.39 59383.72
SMC SOR , coiour works,Pg No.15,item no.-5
Page 12 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & applying two coats of weather shield max paint (3
coats may be required in case of darker colours.)of ICI Dulux or
Apex Ultima of Asian Paint including applying exterior acrylic
primer coat as per manufacturers specification and directions in
shade and colour approved by architects, on exterior surfaces of
the building including scaffolding, preparing the surface,
watering, curing etc. complete and as directed by the architects
and manufacturers.
Surface Preparation : surface is thoroughly clean, dry and free
from all loose dirt, chalk, grease, fungi, algae and flaking paint.
51
This can be achieved by brushing with a wire/ stiff coir brush,
followed by water jetting if required. Fill up all minor cracks and
defects with white cement and sand mixture in the ratio 1:3. For
application on previously painted wall, previous coatings of paint
must be thoroughly scraped off and Clean the surface thoroughly
using wire brushes. Priming: Apply a liberal coat of exterior
acrylic primer and allow it to dry for 4-5 hours. Application of
putty is not recommended. Minimum 4-6 hours duration is
required between each coat of weather shield max paint.For all
Floors.
For all Floors 988.00 S.M 82.00 81016.00
SMC SOR, coiour works,Pg No.16,item no.-17
Providing & laying granite slab 18mm thick in flooring, treads of
steps and landing laid on bed of 20mm thick cement mortar 1:6
(1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished
52
with flush pointing in white or colour cement including rubbing
and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)
Page 13 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Steel work welded in built up sections, framed work including
cutting, hoisting, fixing in position and applying a priming coat of
red lead paint
55
(A) in beams & joists channels angles, tees, flats with connection
plates or angle cleats as in main & cross beams,hip & trussed
purlins connected to common raffers & the like. For all Floor
For all Floors. 5.00 Qtl. 9047.86 45239.30
SMC SOR ,Pg No.9,IT NO 98(A)
Providing & fixing in position collapsible steel shutters with
vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals
20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with
56
38mm dia. steel pulleys comp. with bolts, locking arrangements,
stoppers, handles incl. applying a priming coat of Redlead paint
etc. comp.
Ground Floor 19.50 S.M 5865.10 114369.45
SMC SOR , PAGE NO 5, IT NO 58
Providing & fixing at all floor levels,both face polished machine
cut edge Marble slab for Shelve joined with grey/White cement
57
slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic
Cost Rs. 450/S.M.)
SMC SOR, PAGE NO.7,IT NO 66 (MR) 9.50 S.M 1050.00 9975.00
58 Wall Vinyl Sticker 44.00 SQ. FT. 28.00 1232.00
SMC SOR, PAGE NO.13,IT NO 146 (MR)
Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)
59 44.00 SQ. FT. 38.00 1672.00
SMC SOR, PAGE NO.13,IT NO 147 (MR)
60 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SQ. FT. 22.00 968.00
SMC SOR, PAGE NO.13,IT NO 148 (MR)
61 5mm PVC sheet Eco Vinyl (Any size) 44.00 SQ. FT. 55.46 2440.24
SMC SOR, PAGE NO.13,IT NO 149 (MR)
Decorative theme base designing & painting with all waterproof
62 0.00 SQ. FT. 63.00 0.00
materials
SMC SOR, PAGE NO.13,IT NO 150 (MR)
TOTAL COST OF SUPER STRUCTURE 1,24,98,129.73
Page 15 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN
1121N ,HindWare F880007
For all Floors. 14.00 Nos 890.00 12460.00
SMC sor Sanitary Items,Page no21,It No. 10
Providing & Fixing stainless steel recessed type Soap dish of
73 approved make. Including providing & fixing screws, washers,
cutting & making good the walls.
Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-
1131N,HindWare F880011
For all Floors. 14.00 Nos 793.00 11102.00
SMC sor Sanitary Items,Page no21,It No. 12
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75
mm diameter with jali of the following nominal diameter of self
74 cleaning design with C.I. scread down or hinged grating including
the cost of cutting and making good the walls.
Page 16 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing, Laying and jointing on true line and level UPVC pipe
(SCH-40) line of prince/Supreme/Jain/Astral/ Tulsi/Finolex make
including fittings make or equivalent as approved by angineer-in-
charge. Pipe shall be fixed on the wall the help of clamp at every
79
two meter C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including cost of all
materials.
40 mm dia 0.00 R.M 148.12 0.00
50 mm dia 0.00 R.M 195.67 0.00
SMC sor Page no 8 It No. 86
Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/
Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor
levels incl. fixtures like bends, tees, shoe etc joined with resin of
approved brand & manufacture etc. comp. Pipe shall be fixed on
80
the wall the help of clamp at every two meter C/C or shall be
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
15 mm dia 8.00 R.M 166.00 1328.00
25 mm dia 33.00 R.M 256.00 8448.00
40 mm dia. 20.00 R.M 372.00 7440.00
50 mm dia 18.00 R.M 510.00 9180.00
65mm dia 0.00 R.M 635.00 0.00
SMC sor Page no8 It No. 87 MR
Providing and fixing M.S. holder bat clamps at all floor level,of
81 approved design to C.I. or S.C.I pipes including cost of cutting
holes and making good the wall etc. comp. (M.R)
(B) 100 mm Dia. 0.00 NO 30.00 0.00
SMC sor- Page no8, It No. 90 MR
Providing and fixing G.I. holder "Z" clamps at all floor level,of
82 approved pipes including cost of cutting holes and making good
the wall etc. comp. (M.R)
(A) 40 TO 50 mm Dia 16.00 NO 62.00 992.00
(B) 75 to 90 mm Dia 8.00 NO 75.00 600.00
(C) 110 mm. dia. 20.00 NO 90.00 1800.00
(C) 150 mm to 200 mm dia 0.00 NO 98.00 0.00
SMC sor- Page no 11, It No. 121 M.R.
Providing and fixing gun metal check or non return full way
83
wheel valve at floor levels,etc. complete.
(A) 15 mm. dia 0.00 NO 186.83 0.00
(B) 25 mm. dia 8.00 NO 420.63 3365.04
(C) 40 mm. dia. 8.00 NO 663.43 5307.44
SMC sor Page no8,It No. 80
Providing and fixing abonite ball cock of approved quality as
84
directed etc. comp.
(A) 25mm. dia. 8.00 NO 102.91 823.28
SMC sor- Page no 8,It No. 82
Page 17 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in
85 cement mortar in proportion 1:1 of following nominal internal
diameters including testing of pipes and joints etc. complete.
(A) 150 mm. dia. 10.00 R.M 248.67 2486.70
(B) 250 mm. dia. 10.00 R.M 656.60 6566.00
(C) 300 mm. dia. 10.00 R.M 900.20 9002.00
SMC sor- Page no.8, It No. 77
SMC Storm drainage SOR 20-21, Page no1 It No.1
Providing and fixing s.w. Gully trap with C.I. gratting brick
masonary chamber and water tight Pre cast R.C.C.cover of
86 300mm X 300mm size (inside) including plastering smooth inside 4.00 Nos 1098.48 4393.92
and outside 15 mm thick in C.M 1:3 etc. comp.i) square mouth
traps (A)300 MM X 300 MM Size - P type.For all Floors.
SMC sor,Page no 7, It No. 74
Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside
dimension ,455 x 610 mm & 450 mm deep sewer trap chamber
with 23 cm th' B.B. masonary walls in C.M 1:5 with cement
plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,
87 R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone 0.00 No. 3155.63 0.00
aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I.
cover with frame to be not less than 38 kg. On top etc. comp. for
single pipe.'.(A) Precast RCC heavy duty Cover instead of C.I.
Cover
(A).Same as above but Precast RCC heavy duty Cover instead of
4.00 No. 2904.47 11617.88
C.I. Cover
Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71 0.00
SMC sor, Page no.7, It No.75
Providing & construction simple chamber of 23 cm. th' B.B.
Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3
inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix
88 ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size), 0.00 No. 2932.93 0.00
Foundation concrete 1: 5: 10 & fixing C.I. cover with frame to be
not less than 38 kg. On top etc. comp. Inside dimension, 455 x
610 mm &450 mm deep for single pipe
(A).Same as above but Precast RCC heavy duty Cover instead of
4.00 No. 2681.76 10727.04
C.I. Cover
Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39 0.00
SMC sor - Page no8,It No.76
Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size
89
having weight not less than 35 Kg. etc. complete.
SMC sor- Page no.8, It No. 83 4.00 NO 958.17 3832.68
Providing and fixing G.I, Rain water spout of 50 mm dia and 30
90
cm Length
SMC sor- Page no6 It No. 64 6.00 NO 101.91 611.46
Page 18 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & fixing white vitreous china urinal of size 450
x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia.
91 C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P.
flange complete including cutting and making good the walls and
floors wherever required.
Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-
4.00 NO 2476.00 9904.00
WHT 13261H ,HindWare BACK SMALL 60001
SMC sor- Sanitary Items,Page no.21, It No.8
Providing & fixing at all floor levels,both face polished machine
cut edge Marble slab for urinal partition joined with grey/White
92
cement slurry (1:1) incl. Rubbing & polishing etc. complete.
(M.R.)( Basic Cost Rs. 450/S.M.)
SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00 4200.00
Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.
boxing, centering, vibrating, curing & mixed with approved water
proofing cement
compound or "CEMWET"or"PIDICRETE LW"integral water
proofing admixture as water proofing agent to be mixed with 50
kg. cement bag shall be as recommended by the manufacture of
the water proofing material, concrete work for top, bottom slab
& side pardi for Under ground Tank & Item incl. Necessary
93 excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for
bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside
R.C.C. pardi as per design, 10mm.th. water proofing cement
plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to
all inner face & bottom of tank curing etc. comp. incl. Locking
arrangement, outlet, inlet, overflow & wash out pipe
arrangement as necessary & C.I. Cover 0.60 x .045 weight not
less then 35kg. etc. com. as per structural drawing excluding
Steel & as directed by Engineer-in-charge
Under Ground water Tank 20000.00 Lit 5.46 109200.00
SMC sor - Page no6. It No. 60
Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,
Jhonson, Nitco, Somani, Bell make at all floor levels, in flooring,
94 treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3
(1cement : 3 sand) finished with flush pointing in white cement
etc.com. For all floors
Under Ground water Tank 11.38 SM 857.42 9753.16
SMC SOR, Page no4, It No. 34
Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,
Jhonson, Nitco, Somani, Bell make at all floor levels in skirting
risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3 sand)
95
including necessary cement paste for fixing and joined with white
cement slurry etc.complete. For all floors
ELECTRICAL WORK
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR PVC
insulated multi strand copper wires up to 10 mtr length , in
below type of pipe erected with 6A Modular type switch / bell
push & accessories and earth continuity of following type,
erected on PVC / Metallic/Wooden box, single mounting base
98 frame covered with textured/metallic/white front plate modules 103 Pt. 471.92 48608.02
erected on / in wall / ceiling as per pipe erected, with necessary
Lamp holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III SMC SOR Item No. 1-2-
1
Point wiring for secondary light point with 2-1.5 sq.mm & earth
wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade
ZHFR PVC insulated multi strand copper wires, in below type of
pipe to be erected complete with earth continuity and necessary
connection with primary light with accessories erected on Metal
/ PVC / wooden box covered covered with appropriate front
plate modules erected on / in wall / ceiling for open / concealed
99 wiring. with necessary Lamp holder / ceiling rose / 3 Pt. 159.08 477.23
H.D.Connector as directed.as per pipe erected with following
type of accessories.
Note:- Maximum up to 6 mtrs length, excess will be considered
as Mains for Secondary Point.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III SMC SOR Item No. 1-2-
4
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5
sq.mm (Green) both are of .ISI marked 1.1 KV Grade ZHFR PVC
insulated multi strand copper wires up to 10 mtr length, in below
type of pipe erected with 6A Modular type switch and hum free
EME step type electronic fan regulator mounted and
accessories with earth continuity of following type erected on
100 PVC / Metallic/Wooden box, single mounting base frame covered 66 Pt. 660.69 43605.64
with textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.
Page 20 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III SMC SOR Item No. 1-
2-2
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade ZHFR PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling as per pipe
101 erected with following type of accessories. SMC SOR Item No. 1- 2 Pt. 497.37 994.75
2-3
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade ZHFR PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling as per pipe
102 erected with following type of accessories. SMC SOR Item No. 1- 18 Pt. 732.81 13190.50
2-3
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire
from mcb db board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Two Way Controlled Light Point with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked
1.1 KV grade ZHFR PVC insulated multi strand copper wires
erected in below type of pipe with 6A Modular type switches and
following type of accessories erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured /
104 metallic/white front plate modules erected on / in wall / ceiling 4 Pt. 588.58 2354.31
as per pipe erected. with necessary batten/angle holder or
ceiling rose or H.D.Connector as directed. SMC SOR Item No. 1-2-
5
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Page 21 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
erected with necessary connections as per site situation directed
by Engineer In charge. SMC SOR Item No. 1-2-6
(3) Two Pin/RJ-11 Telephone Socket
105
[A] For One Gang, Cat. III 5 Ea. 153.52 767.60
[B] For Two Gang, Cat. III 5 Ea. 200.99 1004.95
(4) TV Co-axial Socket outlet, Cat. III 5 Ea. 153.52 767.60
(7) Blank Plate Single, Cat. III 5 Ea. 24.24 121.20
(8) Computer RJ-45 socket, Cat. III 10 Ea. 153.52 1535.20
(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit
6 Ea. 475.71 2854.26
Complete, Cat. III
(19) Modular Indicating Call Bell, Cat.III 1 Ea. 314.11 314.11
(20) Modular Buzzer, Cat.III 1 Ea. 143.42 143.42
Providing and erecting ISI mark Medium class RIGID PVC PIPES of
following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with
106 adhesive solution & Clamps with following dia of pipes, in
approved manner as directed. SMC SOR Item No. 1-3-2
(a)20 mm 750 Mtr. 23.23 17422.50
(b)25 mm 50 Mtr. 32.32 1616.00
Providing & erecting PVC Corrugated Flexible Conduit with
required nos. of coupling, PVC bushes, Check-nuts etc. complete
107 of following sizes. SMC SOR Item No. 1-3-4
(2) 25 mm 5 Mtr. 20.20 101.00
(5) 50 mm 5 Mtr. 44.44 222.20
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)
having double-locking arrangement with grooves, trunking of size
not below 12.5 mm in height as per IS with accessories of
PVC/Resin polypropylene not below 1.8 mm thick duly sealed in
108
joint & erected on wall / ceiling of following size . SMC SOR Item
No. 1-3-5
(2) 25 mm 5 Mtr. 30.30 151.50
(4) 40 mm 5 Mtr. 40.40 202.00
Providing and erecting Mains with 1.1 KV grade ZHFR PVC
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor ZHFR PVC
109 insulated stranded wire of green colour for earth continuity of
following size SMC SOR Item No. 1-4-1
(A) With medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm 50 Mtr. 62.57 3128.48
(b) 2 wire 2.5 sq. mm 950 Mtr. 82.72 78583.05
Page 22 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
providing and erecting Mains with 1.1 KV grade ZHFR PVC
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with 2.5
sq. mm copper conductor ZHFR PVC insulated stranded wire of
110 green colour for earth continuity of following size SMC SOR Item
No. 1-4-2
(A) with medium class Rigid PVC pipe and accessories
(a) 2 wire 4 sq. mm 100 Mtr. 112.41 11241.30
(d) 3 wire 4 sq. mm 50 Mtr. 143.17 7158.38
Page 24 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Supplying & erecting approved make Electronics Starter and
relay for air conditioners in ABS plastic moulded housing.
Company fabricated with bakelite terminal for connection with
silver coating bimetallic contact in switching device for o/p with
following features.
(1) Low Voltage Protection below 130 V
121 1 Ea. 886.78 886.78
(2) High Voltage protection above 270 V
(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp.
(inverse time chara-)
(4) Indicating LEDs for AC on LV, HV, O/L, T/D
(5) With unique feature of 3 minute of time delay SMC SOR Item
No. 3-10-6-B
Page 25 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & erecting fresh air fan 250 mm dia with square frame
136 7 Ea 1559.44 10916.08
make of ABS body with louvers, Cat. III SMC SOR Item No. 5-3-2
(a) 450mm
Providing and erecting required size HOT deep Galvanised iron
strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel
138 1 Kg. 77.77 77.77
board, Motors etc. using proper clamp. SMC SOR Item No. 3-14-
2
Page 27 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing and erecting Annealed bare Copper wire 8 to 16 SWG.
139 1 Kg. 794.87 794.87
SMC SOR Item No. 3-14-4
Providing and erecting HOT deep Galvanised iron strip wire 8 to
140 5 Kg. 77.77 388.85
16 SWG. SMC SOR Item No. 3-14-5
For using salt and charcoal / coke as required for pipe type
141 1 Ea. 171.70 171.70
earthing. SMC SOR Item No. 3-14-6-c
Page 28 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand / Solid Copper conductor for 1.1 KV. to be laid on
wall with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables. SMC SOR Item No. 4-
146
4-4
(A) 4 core 2.5 Sq. mm 5 Mtr. 269.67 1348.35
(B) 4 core 4 Sq. mm 30 Mtr. 362.59 10877.70
(C) 4 core 6 Sq. mm 5 Mtr. 508.03 2540.15
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Copper conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe at road
147
crossing or floor of following size of cables. SMC SOR Item No. 4-
4-5
(A) 4 core 10 Sq. mm 25 Mtr. 673.67 16841.75
Providing and, fixing heavy duty flange type brass cable gland
with rubber ring for PVC insulated armoured cable complete with
out going tails, insulating tape etc for following size of cables.
148 SMC SOR Item No. 4-6-1
(A) 2 to 4 core 2.5 / 4 Sq. mm 10 Ea. 33.33 333.30
(B) 2 to 4 core 6 Sq. mm 1 Ea. 38.38 38.38
(C) 2 to 4 core 10 Sq. mm 4 Ea. 38.38 153.52
Solder less crimping type Copper lugs conforming to IS suitable
for cable of following size evenly crimped with high pressure tool
& connected to switchgear terminals with brass/cadmium plated
149
nut bolts in an approved manner. SMC SOR Item No. 4-7-2
(A) 1.5/2.5 to 6 Sq.mm 40 Ea. 8.08 323.20
(B) 10 Sq.mm 16 Ea. 10.10 161.60
Supplying & erecting approved make LAN cable of following size in
150 50 Mtr 45.45 2272.50
existing pipe as per direction [C] CAT - 6 SMC SOR Item No. 1-4-8
Page 29 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Page 30 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Preparation of subgrade with compacting, Leveling and
consolidation of subgrade with miniroller/plate vibrator machine
164 917.00 S.M. 4.93 4,520.81
including watering and filling in depression occur the process as
directed by engineer in charge.
SMC SOR-PAGE NO 20 IT NO GD.2
Providing & laying Granular Sub Base(GSB) confirming to Grading
V of Table 400.0 of compacted th. Of 150 mm with specified
graded stone metal and sand mixed in place and laid with
165 mechanical means spreading with motor grader and 47.00 C.M. 1418.04 66,647.88
compactiong with vibratory roller having miimum 80-100 KN
static weight to achieve desired dencity of 98 % of MDD including
all material, labour, machinery with all leads and lifts etc. comp.
SMC SOR-PAGE NO 20 IT NO GD.9
Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded
166 stone agg. 40 m.m Nominal size )& curing comp. incl. cost of 94.00 C.M. 2517.44 2,36,639.36
from work in :Foundation & Plinth
SMC SOR-PAGE NO 1 IT NO 3
providing and laying 200 micron plastic sheet on prepared sub
167 309.00 S.M. 26.00 8,034.00
base as per instruction of Engg. In charge etc. complete.
SMC SOR-PAGE NO 20 IT NO GD.12 MR
Supplying & filling fine sand (pana) in 75 mm /100 mm /
150mm compacted thickness over the base including necessary
168 compaction, watering etc. compacted. Item includes levelling by 52.00 C.M. 413.09 21,480.68
using vibratory plates compacted machine and as directed by
engineer in charge.
SMC SOR-PAGE NO 20 IT NO GD.4
Providing 100mm th. Ready made c.c. kerb of strength M-20
(Size 300mm X 380mm) purchased from SMC's approved
paverblock manufacturer & setting in line level and in truly
vertical postion, including filling joints in C.M. 1:1 (1 part of
169 200.00 R.MT 228.00 45,600.00
cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1
part of cement : 1 part of coarse sand) including watering etc.
complete and as directed by engineer in charge.
Page 31 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & filling in plinth with murrum or selected soil in layers
172 of 20 cm. Th'. Incl. watering, ramming & consolidation etc. 90.00 C.M. 289.06 26,015.40
complete.
SMC SOR-PAGE NO 1 IT NO 11
Providing & laying cement concrete Pavement using 1:1.5:3 (1
cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &
173
Vaccuum Dewatering technique including floating surface with a
skim powder floater, curing etc. complete.
Internal road 47.00 C.M. 5981.00 2,81,107.00
SMC SOR-PAGE NO 20 IT NO GD.10
Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of 1/3 of
174 total thickness with filling of epoxy sealent as directed by 100.00 R.MT 50.00 5,000.00
engineer in charge
SMC SOR-PAGE NO 20 IT NO GD.13
Providing and fixingTMT/CRS bar reinforcement for R.C.C. work
175
including binding and placing in position etc. comp.
Upto G.L./P.L. 1410.00 Kg. 76.21 1,07,456.10
SMC SOR-PAGE NO 1 IT NO 8
Demolition
Demolition including stacking of serviceable materials and
176 disposal of unserviceable materials with all lead and lift (ii) 20.00 C.M. 366.93 7,338.60
Unreinforced cement concrete
SMC SOR-PAGE NO 18 IT NO 3
Page 32 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Garden
LAWN : Area cleaning and side grading, removing unwanted
materials, plants, chrubs,wild grass, weeds,debris,rubbish,etc.
Excavating up to depth 30 C.M surface dressing leveling, making
slopes for drainage according to landscape, Disposal of unwanted
materials with all labour and tools. Development of lawn
including preparation of bed ground, spreading and mixing the
183 good soil with Farm Yard Manure, Gypsum, fertilizer soil with 55.00 S.M 90.00 4,950.00
farm Yard Manure, Gypsum, Fertilizer bas required hand
specified. Planting of lawn grass bits roots of approved quality,
watering and specified. Planting of lawn grass bits roots of
approved quality, watering, and specified. Planting of lawn grass
watering mowing, weeding etc. maintenance of developed lawn
for a period of 6 months.
Page 34 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
for 250 mm dia 90.00 R.M 326.84 29415.60
for 300 mm dia 35.00 R.M 391.74 13710.90
SMC SOR-PAGE NO 9 IT NO 94
Excavation for foundation includ.sorting out & stacking of useful
materials & disposing of the excavated stuff upto 50 mt. Lead &
191
all lift, watering etc. Comp. (A) Loose or Soft soil
Executed With Mechanised Efforts / Machinaries
( 1 ) up to 1.5 mt. Depth 20.00 C.M. 117.26 2345.20
( 2 ) 1.50 to 3.00 mt. Depth 0.00 C.M. 129.98 0.00
SMC SOR-PAGE NO 1 IT NO 1
Providing & laying cement concrete 1:4:8 (1 cement:4 coarse
192 sand:8 gradedstone agg. 40 mm nominal size) & curing comp.
excl.cost of form work in
(A) Foundation and plinth 5.50 C.M. 2680.21 14741.16
SMC SOR-PAGE NO 1 IT NO 4
Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4
graded stoneagg. 20 mm nominal size)& curing comp. Includ.cost
193
of form work but exclu.Cost of reinforcement for reinforced
concrete work in :
(A) foundation, footing, base of columns and mass concrete 5.00 C.M. 3637.34 18186.70
SMC SOR-PAGE NO 9 IT NO 95
Providing & laying ordinary cement con.1:2:4
(1cement:2sand:4graded graded stone agg. 20 mm nominal size)
194
finishing smooth curing etc. comp.Incld. Cost of form work but
excl. Cost of reinforcement for R.C.C. Work in :
( B ) Ground Beam:
(1)Having c/s area up to 0.08s.mt
upto G.L./P.L. 10.00 C.M. 8593.80 85938.00
(2) Having cross sectional area 0.08 to 0.12 sq. mt .
upto G.L./P.L. 0.00 C.M. 7665.60 0.00
SMC SOR-PAGE NO 9 IT NO 96
Providing & laying ordinary cement con.1:2:4
(1cement:2sand:4graded graded stone agg. 20 mm nominal size)
195
finishing smooth curing etc. comp.Incld. Cost of form work but
excl. Cost of reinforcement for R.C.C. Work in :
(A) COLUMNS:
(1) Having c/s area up to 0.08 sq.mt. 5.00 C.M. 12123.79 60618.95
SMC SOR-PAGE NO 9 IT NO 96
Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg. 20
196 mm nominal size) & curing complete including cost of formwork 5.00 C.M. 3982.62 19913.10
in wall caps & copping.
SMC SOR-PAGE NO 9 IT NO 97
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in
197 depth consolidating each disposited layer by ramming and 14.00 C.M. 130.39 1825.46
watering.
SMC SOR-PAGE NO 1 IT NO 10
Page 35 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & fixing IS Mark TMT Bar FE 500D reinforcement for
198
R.C.C. workincl. bending, binding & placing in position etc. comp.
Upto G.L./P.L. 3400.00 Kg. 76.21 259114.00
SMC SOR-PAGE NO 1 IT NO 8
Brick work using common burnt clay building bricks having
crushing strengthnot less than 35 kg./Sq.Cm. in Cement Mortar
199
1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks
Page 36 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing & applying two coats of weather shield max paint (3
coats may be required in case of darker colours.)of ICI Dulux or
Apex Ultima of Asian Paint including applying exterior acrylic
primer coat as per manufacturers specification and directions in
shade and colour approved by architects, on exterior surfaces of
the building including scaffolding, preparing the surface,
watering, curing etc. complete and as directed by the architects
and manufacturers.
Surface Preparation : surface is thoroughly clean, dry and free
from all loose dirt, chalk, grease, fungi, algae and flaking paint.
206 This can be achieved by brushing with a wire/ stiff coir brush,
followed by water jetting if required. Fill up all minor cracks and
defects with white cement and sand mixture in the ratio 1:3. For
application on previously painted wall, previous coatings of paint
must be thoroughly scraped off and Clean the surface thoroughly
using wire brushes.
Priming:
Apply a liberal coat of exterior acrylic primer and allow it to dry
for 4-5 hours. Application of putty is not recommended.
Minimum 4-6 hours duration is required between each coat of
weather shield max paint
Ground Floor
(A) For wall 450.00 S.M 82.00 36900.00
SMC SOR- COLOUR WORK PAGE NO 16 IT NO 17
Providing and fixing M.S. Gate of required pattern to wooden
frames of windows etc. at all floor levels with M.S. flats at
207 requuired spacing & frame aroundsquare or reound bars with
round headed bolts & nuts or by crews incl. Priming coat of Red
lead paint etc. comp.
Ground Floor 1000.00 Kg 104.20 104200.00
Providing & fixing M.S. Grills of required pattern to wooden
frames of windows etc. at all floor levels with M.S. flats at
required spacing & frame around square or round bars with
208
round headed bolts & round headed bolts and nuts or by screws
incl. Priming coat of Red lead paint etc. comp. (A) Plain Grill For
all floors
All Floor 1900.00 KG. 104.20 197980.00
SMC SOR-PAGE NO 5 IT NO 57
Painting two coat (excluding priming coat) on new steel and
other metal surface with synthetic enemal paint, burshing to
209 give an even shade including cleaning the surface of all dirt, dust
and other foreign matters.
Page 38 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Supplying & erecting approved make SMC press moulded
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN rail
for mounting mob & hinged doors as per requirement having
227 locking arrangements with mounting clamp with nuts, bolts & 8.00 Nos. 617.11 4936.88
washers suitable for erection on pole with cable clamps&
earth bolt of following size of box. (For wall mounted
Luminaries on building)
(E) 200mm x 140mm x 125mm [deep]
Page 39 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
G) 25 mm nominal dia 96.00 RMT 40.00 3840.00
Supplying, Installing, testing and Commissioning of
235 GunMetalfinished Ball Valves with fittings of screwed end type
Make:- Zoloto/Sant
15 mm dia nominal dia 0.00 Nos. 860.00 0.00
25mm nominal dia 3.00 Nos. 1250.00 3750.00
Supplying & erecting carbon dioxide (CO2) fire extinguisher user
236 of following capacity with necessary clamps made from 50x 6
mm M.S. IS 7285 Make:- Kanex/ Safex
4.5 kg Capacity 4.00 Nos. 9590.00 38360.00
Supplying & erecting ABC powder type 'Ceasefire' type
237 Fireextinguisher as per IS 4308 with necessary clamp for erection
on wall. Make:- Kanex/ Safex
6 Kg Capacity 4.00 Nos. 3610.00 14440.00
Extenal yard hose cabinet made of M.S.Sheet with powdercoated
238 finish of 2100 mm x 900 mm x 250 mm in size and mounted on 3.00 Nos. 6000.00 18000.00
structural support IS:636. Make:- Fabricated
Hose cabinet Door (Internal) made of M.S.Sheet with
239 powdercoated finish of 750 mm x 600 mm x 250 mm in size and 3.00 Nos. 2117.00 6351.00
mounted on Wall IS:636. Make:- Fabricated
63mm dia instantaneous pattern oblique single headed
240 S.S.Hydrant valve with S.S. cap GI chain twist release type lug. IS 3.00 Nos. 10500.00 31500.00
5290. Make:- Essel/Newage/Aaag/Swati
Providing, fixing, testing and commissioning of 63 mm dia 15m
long RRL hose pipe with 63 mm dia. Male and female S.S.
241 3.00 Nos. 4800.00 14400.00
couplings duly binded with GI wire, rivets etc. IS 636. Make:-
Essel/Newage/Aaag/Swati
Providing, fixing, testing and commissioning of Standard S.S.
Branch Pipe with nozzle of 20 mm nominal bore outlet as per
242 3.00 Nos. 1950.00 5850.00
IS:903 suitable to fit with standard instanteneous type 63 mmdia
coupling. Make:- Essel/Newage/Aaag/Swati
Supplying and fixing First Aid Hose Reel 19mm x 30mtr long with
MS construction spray painted in post office red, conforming to
243 IS 884 with upto date amendments, complete with the following 3.00 Nos. 12500.00 37500.00
as required. Make: ISI: IS 884-1985. Make:-
Essel/Newage/Aaag/Swati
Providing and fixing of Butterfly valve with all
244
accesseriescomplete sets ISI Mark. Make:- Audco/Zoloto
A) 100mm Dia 4.00 Nos. 6136.00 24544.00
B) 50mm Dia 2.00 Nos. 4950.00 9900.00
Providing and fixing horizontal type cast iron double flangedNon
245 Return Valve of approved quality confirming to IS: 5312 Make:-
Audco/Zoloto
A) 100mm Dia 2.00 Nos. 7493.00 14986.00
B) 50mm Dia 1.00 Nos. 7493.00 7493.00
Providing fixing testing and commissioning of Gun metal Four
way fire brigade inlet as per IS:904 having 63mm dia inlet with
246 0.00 Nos. 7800.00 0.00
blank cap and chain with necessary fittings flanges,nut bolts.etc.
Make:- Essel/Newage
Page 40 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Providing fixing testing and commissioning of Gun metal Two
way fire brigade inlet as per IS:904 having 63mm dia inlet with
247 1.00 Nos. 5600.00 5600.00
blank cap and chain with necessary fittings flanges,nut bolts.etc.
Make:- Essel/Newage
Supply and installation of pressure switches of suitable range for
pump sets with required size piping, globe valves, plugs & bronze
248 check valves with orifice in clapper & supplemental air chamber 1.00 Nos. 4400.00 4400.00
with complete assembly as per FM requirements. Make:-
Danfoss (ISI make)
Providing and fixing of dial type Pressure Guage having 100 mm
249 dial & range of 0-14 Kg/cm2 with syphon and cock. Make:- H 1.00 Nos. 1200.00 1200.00
Guru/ Baumer
Providing & Fixing of M.S. Structural work fabricated from
250 standard sections, (MS rounds, angles, channels etc) including 200.00 Kg 120.00 24000.00
cutting, drilling, welding, including cost of fasteners etc.
Supplying and fixing approved make 15 mm dia with
251 1.00 Nos. 2150.00 2150.00
automaticAir Release Valve with unions etc. Make:- Zoloto/Sant
252 CI Foot Valve 100mm Make:- Normax 1.00 Nos. 14570.00 14570.00
253 CI Foot Valve 80mm Make:- Normax 1.00 Nos. 9440.00 9440.00
The Following descriptive photoluminescent Green or Red colour
safety signages in different sizes / graphics / colours / text can be
made according to the standards accepted by the local fire
Service Department.Fire Hydrant - with symbolFire Hydrant &
254 750.00 Nos. 8.00 6000.00
Hose Reel - with symbol Fire Extinguisher - with symbolArrow
downwards + Running man + Emergnecy exit - with symbol.In
case of fire break the glass - with Manual Call Point symbol
Make:- Standard
Providing & fixing of 15mm dia Quartzoid bulb type GMsprinkler
255 77.00 Nos. 300.00 23100.00
head suitable to operate at 68 degree Make:- Tyco
Convetionl 2 Loop Fire Alarm Control Panel Make:- System
256 1.00 Nos. 25200.00 25200.00
Sensor/ Agni
Convetionl Multisensor Detector With Base (Optical/thermal)
257 3.00 Nos. 2570.00 7710.00
Make:- System Sensor/ Agni
258 Manual Call Point Make:- System Sensor/ Agni 3.00 Nos. 3860.00 11580.00
259 Sounder with Control Module 30.00 Nos. 1560.00 46800.00
260 2 Core 1.5 Sq. MM FRLS Cable Make:- Polycap/RR 450.00 RMT 120.00 54000.00
261 25 MM PVC Conduit Make:- Polycap 0.00 RMT 31.50 0.00
262 Cable Laying Charges 0.00 RMT 23.00 0.00
263 Conduit Laying Charges 0.00 RMT 17.25 0.00
Testing, Commissionning, Demo, refilling of all extinguser,Fire
264 1.00 Job 80260.00 80260.00
NOC renewal etc Charges of Fire System for first Year.
Testing, Commissionning, Demo, refilling of all extinguser,Fire
265 1.00 Job 36085.00 36085.00
NOC renewal etc Charges of Fire System for second Year.
Testing, Commissionning, Demo, refilling of all extinguser,Fire
266 1.00 Job 36085.00 36085.00
NOC renewal etc Charges of Fire System for Third year.
Page 41 of 42
SR. SOR RATE-
DESCRIPTION QUANTITY UNIT AMOUNT
NO. 23-24
Testing, Commissionning, Demo, refilling of all extinguser,Fire
267 1.00 Job 36085.00 36085.00
NOC renewal etc Charges of Fire System for Forth year.
Testing, Commissionning, Demo, refilling of all extinguser,Fire
268 1.00 Job 36085.00 36085.00
NOC renewal etc Charges of Fire System for Fifth year.
Totla Amount of Fire System 13,71,168.00
Page 42 of 42