Scribd
Upload
67 views2 pages

Long Term Deflection Check of Beams (As Per BS 8110: 1985 - Part2) Inputs

Uploaded by

MD Rizwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views2 pages

Long Term Deflection Check of Beams (As Per BS 8110: 1985 - Part2) Inputs

Uploaded by

MD Rizwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOCUMENT NO.

QATAR POWER TRANSMISSION SYSTEM EXPANSION


PROJECT:
FOR 2022 - SUBSTATION PACKAGES – S1, S2, S3 & S4 GTC1069-22-72-C002
132kV ASSAMIRIYAH SUBSTATION DESIGNED CHECKED SHEET
TITLE:
UPPER ROOF BEAM DESIGN (As per BS8110 : 1997) HAR SSRI
Long Term Deflection Check of Beams
(As per BS 8110 : 1985 - Part2) 4B18

Inputs
Grade of concrete fcu = 35 N/mm²

Static Modulus of Elasticity of Concrete = 27000 N/mm²

Elastic Modulus of Reinforcement = 200000 N/mm²

Effective span of the beam = 9.54 m

Final limiting deflection (L/350) = 9540/350 = 27.26 mm

Section Properties
Width of the beam b= 500 mm

Depth of the beam D= 1000 mm

Effective cover d' = 50 mm

Effective depth d= 918 mm

Dia of Bar used at Mid span (First Layer) 4 Nos. ɸ= 25 mm

Dia of Bar used at Mid span (Second Layer) 4 Nos. ɸ= 20 mm

Dia of Bar used at shear Stirrups ɸ= 10 mm

Design Moments at Mid span ( Unf. short term load) = 750.00 kN-m

Design Moments at Mid span (Unf. Long Term Load) = 650.00 kN-m

Centroidal axis for gross section = 500 mm


4
Gross moment of Inertia Igr = 4.17E+10 mm

Mid Span Reinforcement Provided

Area of tension steel Ast = 3219 mm²

Percentage of tension steel pt = 0.70 %


Short-Term Deflection

Modular ratio m = Es/Ec = 7.4

Location of Neutral Axis x= 251.9 mm


4
Second Moment of area Ie = 8.16E+10 mm

Calculation of Curvatures

Instanteneous Curvature for Short Team Load


3
1 (h - x) b f ct 1/rb = 2.93E-07 /mm
= M- Ee Ie =
rb (d - x) 3

Instantaneous Curvature for Long Term Load

1
3
(h - x) b f ct 1/rb = 2.48E-07 /mm
= M- Ee Ie =
rb (d - x) 3

Page 272 of 774


DOCUMENT NO.
QATAR POWER TRANSMISSION SYSTEM EXPANSION
PROJECT:
FOR 2022 - SUBSTATION PACKAGES – S1, S2, S3 & S4 GTC1069-22-72-C002
132kV ASSAMIRIYAH SUBSTATION DESIGNED CHECKED SHEET
TITLE:
UPPER ROOF BEAM DESIGN (As per BS8110 : 1997) HAR SSRI
For Long Term Loading:

Creep coefficient Ø= 2.05 (BS 8110:2 1985,Sec7.3)


Ee = Ec/(1+ Ø) = 8852.46 N/mm²

Modular ratio m = Es/Ec = 22.6

Location of Neutral Axis x= 391.2 mm


4
Second Moment of area Ie = 6.68E+10 mm
Long Term Curvature for Long Term Load
3
1 (h - x) b f ct 1/rb = 9.78E-07 /mm
= M- Ee Ie =
rb (d - x) 3

Calculation of Shrinkage Curvature


1/rcs = εcs x αe x S / I
where αe =Es/Eeff. = = 22.6

4
= 3.01E+10 mm

3
S = 1.69E+06 mm
1/rcs = 3.81E-07 /mm

Calculate Total Long Term Deflection:


Therefore, Total Long Term Curvature 1/rb = 1.40E-06 /mm
Bending Moment Shape coefficient, K = 0.104 (Table 3.1, BS8110 :
Part 2 : 1985, p.3/5)
2
Estimated Total Long Term Deflections δ = kl x 1/rb = 13.29 mm
SAFE IN DEFLECTION

Page 273 of 774

You might also like