AS3310
AS3310
FEATURES APPLICATIONS
Large Time Control Range: 100,000:1 for electronic music
Full ADSR Response
True RC Envelope Shape AS3310 AS3310D
Exceptionally Low Control Voltage Feedthrough: 90µVmax
РDIP-16 (300 Mil) SOIC-16 (150 Mil)
Accurate Exponential Time Control Scales
Isolated Control Inputs
Good Repeatability and Tracking Between Units Without
External Trim
Independent Gate and Trigger
Wide power supply range:
negative rail: -15V ÷ -9V (via external resistor)
positive rail: +11V ÷ +15V
General Description
The AS3310 is a self-contained, precision ADSR type of envelope generator intended for electronic music and other
sound generation applications. Attack, decay and release times are exponentially voltage controllable over a wide range, and
the sustain level is linearly voltage controllable from 0 to 100% of the peak voltage Vp. All four control Inputs are Isolated from
the rest of the circuitry so that the control pins of tracking units may be simply tied together.
On the negative power output, there is an internal Zener diode at 7.4 volts ± 10%, which allows the chip to supply a
maximum voltage of ± 15 volts with a current-limiting resistor REE, and a minimum positive supply voltage of + 11 volts and a
minimum negative supply voltage of -5 volts.. A series current limiting resistor must be added between pin 6 and the supply. Its
value is calculated as follows: REE = (VEE - 7.5) / 0,010
V P=5V
Output VCS
* Zero to -5V Varies the Times Q1 Disabled ***
from 2mS to 20S 0V
+2.4V to VCC
**Zero to +5V Varies the Sustain
Level from 0 to 100% Gate
0V
+2.4V to VCC
***Q1 Disabled if only a gate is applied with
no trigger Trigger
.
0V
2019 v.6 1
AS “АLFA RPAR”
Joint Stock Company ALFA AS3310
Riga, Latvia www.alfarzpp.lv; [email protected]
Typical Electrical Characteristics VCC=+15V VEE = -6,5 to -15V RX= 30K TA= 25°C
Note 1: Scale factor determined at mid-range. Spec represents total deviation from ideal at range
extremities.
Note 2: Output is at either sustain final voltage or release final voltage. VCA, VCD, VCR varies 0 to -240mV.
Note 3: Spec represents the difference between the actual final voltages (attack asymptote voltage,
sustain final voltage, and release final voltage in the case of attack, decay, and release respectively) and
the apparent voltage to which the output seems to be approaching asymptotically.
Note 4: Current limiting resistor required when VEE > -7 volts.
Note 5: Spec also represents time constant variation between units for VCA, VCD, VCR = 0.
2019 v.6 2
AS “АLFA RPAR”
Joint Stock Company ALFA AS3310
Riga, Latvia www.alfarzpp.lv; [email protected]
Package Information
SOIC-16 (150Mil)
Revision history
Date Revision Changes
27-Sep-2017 1 Preliminary version 1
21-Oct-2017 2 Minor changes: Ccomp=10nF
29-Nov-2017 3 Changes in supply and attack levels
19-Dec-2017 4 Changes in Description and Block Diagram
21-May-2018 5 Minor changes
30-Sep-2019 6 Minor changes: RX=30K
2019 v.6 3