ACO ENVIRONMENT

Ø 6“
NS6/660 OLEOPATOR P - MDPE vertical body oil-water separator
Separator body

1.18“ (30mm)

ACO Specification Information

inlet outlet
Ø 6“
73.43 (1865mm)

59.06“ (1500mm)

58.27“ (1480mm)

Ø51.97“ (1320mm)

Model Maximum Volume Volume Total Weight Part

number flow* solids trap oil storage capacity lbs No.
L/s (gpm) L (gal) L (gal) L (gal)
NS6/660 6 (95) 660 (175) 235 (62) 970 (257) 200.2 3906.80.00
* Maximum flow indicated is for optimum performance - under 5mg/L hydrocarbons in effluent; higher flows can run through separator

Extension shafts & covers

PEDESTRIAN DUTY HEAVY DUTY

Cover only
31.50“ (800mm)
3.15“ (80mm)

74.17“ (1884mm)
68.11“ (1730mm)

Concrete
load
Cover with short distribution
extension shaft plate (by
others)

Cover with deep

extension shaft Cover with
extension shaft

April 2018 www.acousa.com

 ACO ENVIRONMENT
NS6/660 OLEOPATOR P - MDPE vertical body oil-water separator
Pedestrian Duty Top

Ø23.62“ (600mm) Specifications

frame & cover
ACO Specification Information

General
The oil water separator shall be ACO
Oleopator P NS6/660 complete with
ductile iron cover as manufactured by ACO,
Inc.

extension shaft Materials

The separator body shall be manufactured
from medium density polyethylene (HDPE) and
T

have minimum properties as follows:

Tensile impact strength: 152 ft-lb/in2
Tensile strength, ultimate: 3,480 psi
Water absorption 0.01%
Frost proof, salt proof and fuels and oils
resistant
Ø 6“

The oil separator shall be equipped with a

coalescing unit and automatic shut-off valve
for situations when maximum oil capacity is
T Weight Part reached. Minimum oil storage capacity shall
be 235 Liters (62 gal); minimum suspended
mm (inches) frame &lbs
cover No. solids storage capacity shall be 660 Liters
Ø24.4“ (620mm)
Cover only 440 (17.3) 298.0 3301.14.00 (175 gal). Separator shall be resistant to uplift
Cover & short extension shaft 750-1050 (29.5-41.3) 376.2 3301.14.01 forces from underground water up to finished
grade water table level. The oil separator
Cover & deep extension shaft 750-1800 (29.5-70.9) 424.8
adaptor ring 3301.14.02
should not require a concrete surround.

Heavy Duty Top Performance

The effluent water should contain maximum
frame & cover 5mg/L (5ppm) for maximum designed flow.
Ø24.4“ (620mm) Independent performance testing should be
load distibution available on request.
plate (concrete)
T

Cover
adaptor ring
extension shaft Cover shall be manufactured from ductile iron
to ASTM A 536-84 – Grade 65-45-12 and
have a minimum inside opening diameter of
600mm (24in). The cover should be marked
‘Separator’ on the top. The cover shall be
Concrete load distribution
capable of withstanding pedestrian / heavy
load distibution
Ø 6“

vehicle traffic*.
plate (by
plate (concrete)
others)
T

Distance from finished grade to inlet pipe

extension shaft
invert (T) shall be . . . mm (. . . in). (see tables
for values).

Accessories
1.18“ (30mm) The separator shall be equipped with high
liquid level alarm / maximum oil capacity
Ø 6“Ø 6“

inlet outlet alarm / maximum suspended solids capacity

alarm** systems.

T Weight Part Installation

mm (inches) lbs No. Separator shall be installed in strict
accordance with the manufacturer’s installation
Cover & extension shaft 885-1790 (34.8-70.5) 627.0 3301.17.00 instructions and recommendations.
73.43 (1865mm)

59.06“ (1500mm)

58.27“ (1480mm)

NOTE: 1500mm (59in) diameter x 200mm thick concrete load distribution plate by others * Choose one /** Choose none, one or more

SPEC
INFO

ACO, Inc.
Northeast Sales Office West Sales Office Southeast Sales Office Follow us on
9470 Pinecone Drive 825 W. Beechcraft St. 4211 Pleasant Road
Mentor, OH 44060 Casa Grande, AZ 85122 Fort Mill, SC 29708
Tel: (440) 639-7230 Tel: (520) 421-9988 Toll free: (800) 543-4764 Electronic Contact:
Toll free: (800) 543-4764 Toll Free: (888) 490-9552 Fax: (803) 802-1063 [email protected]
Fax: (440) 639-7235 Fax: (520) 421-9899 www.acousa.com
© April 2018, ACO, Inc. This information is believed to be accurate but it is not guaranteed to be so. We cannot assume liability for results that buyer obtains with our product
since conditions of use are beyond the control of the company. It is the customer’s responsibility to evaluate suitability and safety of product for his own use. ACO, Inc.
reserves the right to change the product and specifications without notice. Re-order # EL011

April 2018 www.acousa.com