Data sheet 3UG4615-1CR20

Digital monitoring relay 3-phase supply voltage Phase sequence can be activated
Phase failure 3 x 160 to 690 V 50 to 60 Hz AC Undervoltage and overvoltage 160-
690 V Hysteresis 1-20 V 0-20 s each for Umin and Umax 1 CO for Umin 1 CO for
Umax screw terminal Successor product for 3UG3041-1BP50

product brand name SIRIUS

product designation Network monitoring relay with digital setting
design of the product 5 functions
product type designation 3UG4
General technical data
product function Phase monitoring relay
display version LED No
design of the display LCD
insulation voltage for overvoltage category III according to
IEC 60664
● with degree of pollution 3 rated value 690 V
degree of pollution 3
type of voltage
● for monitoring AC
● of the control supply voltage AC
surge voltage resistance rated value 6 kV
protection class IP IP20
shock resistance according to IEC 60068-2-27 sinusoidal half-wave 15g / 11 ms
vibration resistance according to IEC 60068-2-6 1 ... 6 Hz: 15 mm, 6 ... 500 Hz: 2g
mechanical service life (operating cycles) typical 10 000 000
electrical endurance (operating cycles) at AC-15 at 230 V 100 000
typical
thermal current of the switching element with contacts 5A
maximum
reference code according to IEC 81346-2 K
relative repeat accuracy 1%
Substance Prohibitance (Date) 05/01/2012
Product Function
product function
● undervoltage detection Yes
● overvoltage detection Yes
● phase sequence recognition Yes
● phase failure detection Yes
● asymmetry detection Yes; not adjustable, indirectly by monitoring the voltage limit values
● overvoltage detection 3 phase Yes
● undervoltage detection 3 phases Yes
● voltage window recognition 3 phase Yes
● adjustable open/closed-circuit current principle Yes
● auto-RESET Yes
Control circuit/ Control

3UG46151CR20 Subject to change without notice

8/1/2023
Page 1/4 © Copyright Siemens
 control supply voltage at AC
● at 50 Hz rated value 160 ... 690 V
● at 60 Hz rated value 160 ... 690 V
operating range factor control supply voltage rated value at
AC at 50 Hz
● initial value 1
● full-scale value 1
operating range factor control supply voltage rated value at
AC at 60 Hz
● initial value 1
● full-scale value 1
Measuring circuit
measurable voltage at AC 160 ... 690 V
adjustable response delay time
● with lower or upper limit violation 0.1 ... 20 s
accuracy of digital display +/-1 digit
Precision
relative metering precision 5%
Auxiliary circuit
number of NC contacts delayed switching 0
number of NO contacts delayed switching 0
number of CO contacts
● for auxiliary contacts 2
● delayed switching 2
operating frequency with 3RT2 contactor maximum 5 000 1/h
Main circuit
number of poles for main current circuit 3
ampacity of the output relay at AC-15
● at 250 V at 50/60 Hz 3A
● at 400 V at 50/60 Hz 3A
ampacity of the output relay at DC-13
● at 24 V 1A
● at 125 V 0.2 A
● at 250 V 0.1 A
operational current at 17 V minimum 5 mA
continuous current of the DIAZED fuse link of the output 4A
relay
Electromagnetic compatibility
conducted interference
● due to burst according to IEC 61000-4-4 2 kV
● due to conductor-earth surge according to IEC 61000-4-5 2 kV
● due to conductor-conductor surge according to IEC 1 kV
61000-4-5
field-based interference according to IEC 61000-4-3 10 V/m
electrostatic discharge according to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge
Galvanic isolation
galvanic isolation
● between input and output Yes
● between the outputs Yes
● between the voltage supply and other circuits Yes
Connections/ Terminals
product component removable terminal for auxiliary and Yes
control circuit
type of electrical connection screw-type terminals
type of connectable conductor cross-sections
● solid 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²)
● finely stranded with core end processing 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²)
● for AWG cables solid 2x (20 ... 14)
● for AWG cables stranded 2x (20 ... 14)
connectable conductor cross-section
● solid 0.5 ... 4 mm²
● finely stranded with core end processing 0.5 ... 2.5 mm²

3UG46151CR20 Subject to change without notice

8/1/2023
Page 2/4 © Copyright Siemens
 AWG number as coded connectable conductor cross
section
● solid 20 ... 14
● stranded 20 ... 14
tightening torque with screw-type terminals 0.8 ... 1.2 N·m
Installation/ mounting/ dimensions
mounting position any
fastening method snap-on mounting
height 92 mm
width 22.5 mm
depth 91 mm
required spacing
● with side-by-side mounting
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
● for grounded parts
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— at the side 0 mm
— downwards 0 mm
● for live parts
— forwards 0 mm
— backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -25 ... +60 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
Certificates/ approvals
Declaration of Con-
General Product Approval EMC
formity

Confirmation

Declaration of Con-
Test Certificates Marine / Shipping other
formity

Special Test Certific- Type Test Certific- Confirmation

ate ates/Test Report

Railway

Vibration and Shock

Further information

3UG46151CR20 Subject to change without notice

8/1/2023
Page 3/4 © Copyright Siemens
Siemens has decided to exit the Russian market (see here).
https://press.siemens.com/global/en/pressrelease/siemens-wind-down-russian-business
Siemens is working on the renewal of the current EAC certificates.
Please contact your local Siemens office on the status of validity of the EAC certification if you intend to import or offer to supply these products to an
EAC relevant market (other than the sanctioned EAEU member states Russia or Belarus).
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3UG4615-1CR20
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3UG4615-1CR20
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3UG4615-1CR20
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3UG4615-1CR20&lang=en
Characteristic: Derating
https://support.industry.siemens.com/cs/ww/en/ps/3UG4615-1CR20/manual

22,5 86
7 65
4 5

L1 L2 L3

SIRIUS
15x110
68,2

120

83
74

92
12 11 14

22 21 24

last modified: 3/22/2023

3UG46151CR20 Subject to change without notice

8/1/2023
Page 4/4 © Copyright Siemens