N-Ash 20

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

TECHNICAL DATA SHEET

N-ASH
GENERAL
N-ASH (pulverised fly ash) is a by – product of coal burning at the thermal power plants. As
coal is burned non-combustion mineral impurities in coal evaporates and condense into
tony particles of glass almost totally spherical in shapes. The fly ash particles are removed
from exhaust stream in bags houses or electrostatic precipitators (ESP) and then stored for
later processing
Pozzolanic material made of silica, alumina, iron and calcium. This capability is one of the
properties making fly ash a desirable admixture of concrete and cement

CHEMICAL SPECIFICATION OF N-ASH

SR # PARAMETERS UNIT N-ASH


1 SiO2+AI2O3+Fe2O3 % MIN 90
2 SiO2 % MIN 55
3 Reactive SiO2 % MIN 50
4 CaO % MAX 1
5 MgO % MAX 1
6 SO3 % MAX 2
7 Alkali as Na2O % MAX 1
8 Total CI % MAX 0.05
9 Loss on Ignition % MAX 2
10 Moisture Content % MAX 1

PHYSICAL SPECIFCATION OF N-ASH

SR # PARAMETERS UNIT N-ASH


1 Specific Surface (Blaine), Min (M2/Kg) 320
2 Fineness on 45 micron Sieve % Max 20
3 Lime Reactivity N/mm2 4.5
N-ASH PACKAGING STORAGE
N-ASH IS DRY FLY ASH N-ASH AVAILABLE IN SHOULD BE KEPT IN DRY
PARAMETERS MATCHING OR FOLLOWING PACKING STORAGE. PRODUCT THAT
BETTER THEN OF ASTM C618 OPTION HAVE BE SUBJECTED TO
CLASS F WITH FINENESS • 1400KG JUMBO BAG MOISTURE AND ALLOWED
BELOW 25% WITH LINER TO DRY AGAINS MAY
RESULT IN TO INFERIOR
• 1000KGS KG JUMBO PERFORMANCE
BAGS WITHOUT
LINER
• 40 KGS BAG

STANDARD SPECIFICATION OF FLY ASH ACCORDING TO DIFFERENT STANDARDS

NO PARAMETERS UNIT ASTM C618 CLASS F EN 450 IS 3812

CHEMICAL PROPERTIES

1 SiO2 + Al2O3 + Fe2O3 % Min 70.00 70.00 70.00

2 SiO2 % Min NS NS 35.00

3 Reactive Silica % Min NS 25.00 20.00

4 MgO % Max NS 4.00 5.00

5 Sulfur as SO3 % Max 5.0 3.00 3.00

6 Na2O % Max NS 5.00 1.50

7 Total Chloride % Max NS 0.10 0.05

PHYSICAL PROPERTIES

Fineness – Specific Surface by


1 M2/kg NS NS 320
Blaine’s Permeability Method

2 Retained on 45 Micron Sieve % Max 34 12 34

3 Loss on Ignition % Max 6 7 5

4 Water Requriement % 115 95 NS

5 Lime Reactivity N/mm2 Min NS NS 4.5

6 Moisture Content % Max 3.00 NS 2.00

7 Soundness by Autoclave 0.80 % 10mm 0.80%

Compressive Strenght at 28 days


8 N/mm2 75% 75 80%
Of plain Mortar Cement
BENEFITS

• The most important benefit is reduced permeability to water and aggressive


chemicals. Properly cured concrete made with fly ash create a dense product
because the size of the pores are reduced. This increases the strength and reduces
permeability
• All precast concrete producers can use fly ash to improve quality and durability of
their products. Fly ash improves concrete’s workability, pumpability, cohesiveness,
finish, ultimate strength and durability as well as solves many problems experience
with concrete today and all for less cost. However it must be used with care, without
adequate knowledge of its use and taking proper precautions, problems can result in
mixing, setting time, strength development and durability.

Fly ash Fly Ash in Jumbo bags

NOTE: The information give on this datasheet is accurate to the best knowledge of Navdeep Trradex. This
information is subject to change without notice for latest update or further information or assistance please
contact us on email address or internet address or our contact details which are given in this datasheet

NAVDEEP TRRADEX
Sales
(M): +91 9898758855 (O): +91 2717 284260 (F): +91 7940067868
(E): [email protected] (W): www.navdeepgroup.com

You might also like