MODULE 2

Decision Control and Looping Statements

2.4 Introduction to Decision Control or Branching Statements
 The statements that transfer the control from one place to other place in the program
with or without any condition are called branch statements or selection statements.
 The branching statements are classified into two types:
i. Conditional branch statements
ii. Unconditional branch statements

(i) Conditional branch statements

 The statements that transfer the control from one place to another place in the program
based on some conditions are called Conditional branch statements.

Simple- if (One-way selection)

if-else (Two-way selection)

Conditional Nested-if (Multi-way selection)

Branch statements
Cascaded if-else or else-if ladder (Multi-way selection)

switch (Multi-way selection)

(ii) Unconditional branch statements

 The statements that transfer the control from one place to another place in the program
without any condition are called Unconditional branch statements.

goto

break
Unconditional
Branch statements continue

return

2.5 Conditional Branching Statements

2.5.1 if Statement
 The ‘if’ statement is the simplest form of decision control statement.
 When a set of statements have to be executed when an expression (condition) is evaluated to
true or skipped when an expression (condition) is evaluated to false, then if statement is used.
 It is used whenever there is only one choice (alternative). Hence it is also called as “One-
way decision or selection statement”.

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 1
Syntax of if statement

if(test Expression)
{ test
Expression False
Statement 1;
Statement 2; True
... Statement 1
Statement 2
…
…
… …
…
Statement n; Statement n
}
Statement x; Statement x

 The ‘if’ structure may include one statement or ‘n’ statements enclosed within curly brackets.

Working Principle
 First the test expression is evaluated. If the test expression is true, then the statements of ‘if’
block (statement 1 to n) are executed. Otherwise these statements will be skipped and the
execution will jump to statement x.

Rules for if-statement

a) ‘if’ must be followed by an expression and the expression must be enclosed within
parenthesis.
b) If multiple statements have to be executed when the expression is true, then all those
statements must be enclosed within braces.
c) No semicolon is required for an if-statement.
if(a<b); // statement indicates a NULL statement. It will ‘do nothing’.

Example Programs for ‘if’ statement

1. Write a C program to determine whether a person is eligible to vote or not.
#include<stdio.h>
void main()
{
int age;
printf(“Enter the age:”);
scanf(“%d”,&age);
if(age>=18)
printf(“\nThe person is eligible to vote”);
if(age<18)
printf(“\nThe person is not eligible to vote”);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 2
2. Write a C program to check whether the number is even or odd and print the
appropriate message.
#include<stdio.h>
void main()
{
int n;
printf(“Enter a number:”);
scanf(“%d”,&n);
if(n%2==0)
printf(“Number is even”);
if(n%2=0)
printf(“Number is odd”);
}

3. Write a C program to print the largest of two numbers.

#include<stdio.h>
void main()
{
int a,b;
printf(“Enter the two numbers:”);
scanf(“%d%d”,&a,&b);
if(a>b)
printf(“\n a is greater than b”);
if(b>a)
printf(“\n b is greater than a”);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 3
2.5.2 if-else statement
 If one set of activities have to be performed when an expression is evaluated to true and
another set of activities have to be performed when an expression is evaluated to false, then
if-else statement is used.

Syntax of if-else statement:

if(test Expression)
{
Statement block 1; True False
Test
Expression
}

else
Statement block 1 Statement block 2
{

Statement block 2;
}
Statement x
Statement x;

 The is-else statement is used when we must choose between two choices (alternatives).
Hence is also called as “Two-way Decision or Selection Statement”.

Working Principle
 According to the if-else construct, first the ‘test expression’ is evaluated.
 If the expression is true then Statement block 1 is executed and Statement block 2 is skipped.
 If the expression is false the Statement block 2 is executed and Statement block 1 is ignored.
 Now in any case after the Statement block 1 or 2 gets executed the control will pass to
Statement x. It is executed in every case.

Example Programs for ‘if-else’ statement

1. Write a C program to determine whether a person is eligible to vote or not.
#include<stdio.h>
void main()
{
int age;
printf(“Enter the age:”);
scanf(“%d”,&age);
if(age>=18)
printf(“\nThe person is eligible to vote”);
else
printf(“\nThe person is not eligible to vote”);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 4
2. Write a C program to check whether the number is even or odd and print the
appropriate message.
#include<stdio.h>
void main()
{
int n;
printf(“Enter a number:”);
scanf(“%d”,&n);
if(n%2==0)
printf(“Number is even”);
else
printf(“Number is odd”);
}

3. Write a C program to enter a character and then determine whether it is a vowel or not.
#include<stdio.h>
void main()
{
char ch;
printf(“Enter any character:”);
scanf(“%c”,&ch);
if(ch==’a’||ch==’e’||ch==’i’||ch==’o’||ch==’u’||ch==’A’||ch==’E’||ch==’I’||ch==’O’||ch==’U’)
printf(“\n Character is a vowel”);
else
printf(“\n Character is a consonant”);
}

4. Write a C program to find whether a given year is leap year or not.

#include<stdio.h>
void main()
{
int year;
printf(“Enter any year:”);
scanf(“%d”,&year);
if(((year%4==0)&&(year%100!=0))||(year%400==0))
printf(“%d is a leap year”,year);
else
printf(“%d is not a leap year”,year);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 5
2.5.3 Nested if-else statement
 An if-else statement within if statement or an if-else statement within else statement is
called “nested if or if-else statement”.
 When an action has to be performed based on many decisions involving various types of
expressions and variables, then this statement is used. So it is called as “Multi-way decision
statement”.
Syntax for nested if-else statement:
if(test Expression1)
{
if(test Expression2) True Test False
{ Expression1

Statement block 1;
}
else True False Statement
Test
{ Expression2 block 3
Statement block 2;
} Statement Statement
} block 1 block 2
else
{
Statement block 3; Statement x
}
Statement x;

Working Principle
 If the test expression 1 is evaluated to true, then the test expression 2 is checked for true or
false. If the test Expression2 is evaluated to true, then the statements in block 1 are executed,
otherwise the statements in block 2 are executed. After executing the inner if-else the control
comes out and the statement x is executed.
 If the test expression1 itself is false, then the statements in block 3 are executed. After
executing these statements, the statement x is executed.

Example Programs for ‘nested if-else’ statement

1. Write a C program to find the largest of three numbers.
#include<stdio.h>
void main()
{
int a,b,c;
printf(“Enter the three numbers:”);
scanf(“%d%d%d”,&a,&b,&c);
if(a>b)
{

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 6
 if(a>c)
printf(“Max=%d”,a);
else
printf(“Max=%d”,c);
}
else
{
if(b>c)
printf(“Max=%d”,b);
else
printf(“Max=%d”,c);
}
}

2.5.4 Cascaded if-else or if-else-if or else-if-ladder Statement

 It is a special case of nested-if statement where nesting takes place only in the else part.
 The orderly nesting of if-else statement only in the else part is called ‘else-if-ladder’.
 When an action has to be selected based on the range of values, then this statement is used.
So it is called “Multi-way Decision or Selection Statement”.
Syntax :
if(test expression1)
{
Statement block 1; T Test F
Expression1
}
else if(test expression2)
{ T Test F
Statement block 2; Statement Expression 2

} block 1
….
…. Statement
….
…. block 2
else
Statement
{ block n

Statement block n;
}
Statement x
Statement x;

Working Principle
 The ‘Expressions’ are evaluated in order. If any expression is true then the statement
associated with it is executed and this terminates the whole chain and statement x is
executed.
 The last ‘else’ part is executed when all the test expression are false.

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 7
Example Programs for ‘cascaded if-else’ statement
1. Write a C program to demonstrate the use of cascaded if structure.
#include<stdio.h>
void main()
{
int x,y;
printf(“Enter the values of x and y:”);
scanf(“%d%d”,&x,&y);
if(x==y)
printf(“\n The two numbers are equal”);
else if(x>y)
printf(“\n %d is greater than %d”,x,y);
else
printf(“\n %d is less than %d”,x,y);
}

2. Write a C program to print whether the number is positive, negative or zero.

#include<stdio.h>
void main()
{
int n;
printf(“Enter a number:”);
scanf(“%d”,&n);
if(n==0)
printf(“Number is zero”);
else if(n>0)
printf(“Number is positive”);
else
printf(“Number is negative”);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 8
3. Write a C program to input 3 numbers and then find the largest of them using ‘&&’
operator.
#include<stdio.h>
void main()
{
int a,b,c;
printf(“Enter the three numbers:”);
scanf(“%d%d%d”,&a,&b,&c);
if(a>b && a>c)
printf(“\n %d is the largest number”,a);
else if(b>a && b>c)
printf(“\n %d is the largest number”,b);
else
printf(“\n %d is the largest number”,c);
}

4. Write a C program to display the examination results.

#include<stdio.h>
void main()
{
int marks;
printf(“Enter the marks:”);
scanf(“%d”,&marks);
if(marks>=75)
printf(“\n First Class with Distinction”);
else if(marks>=60&&marks<75)
printf(“\n First Class”);
else if(marks>=50&&marks<60)
printf(“\n Second Class”);
else if(marks>=40&&marks<50)
printf(“\n Third Class”);
else
printf(“\n Fail”);
}

2.5.5 switch statement

 The ‘switch’ statement is a control statement used to select one alternative among several
alternatives.
 It is a “multi-way decision statement” that tests whether an expression matches one of the
case values and branches accordingly.

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 9
 switch statement syntax True Statement
switch(expression) Value1
block 1
{
False
case value-1: Statement block 1;
break; True
Value2 Statement
case value-2: Statement block 2; block 2
break;
….. False
….. … ….
… ….
case value-n: Statement block n;
break; True
Valuen Statement
default: Statements; block n
} False
Statement x;
default Statements

Statement x

Working Principle
 First the expression within switch is evaluated.
 The value of an expression is compared with all the case values.
 The value of an expression within switch is compared with the case value-1. If it matches
then the statements associated with that case are executed. If not then the case value-2 is
compared, if it matches then the associated statements are executed and so on.
 The “default” statements are executed when no match is found.
 A default is optional.
 The ‘break’ statement causes an exit from the switch. ‘break’ indicates end of a particular
case and causes the control to come out of the switch. [Significance of break within switch
statement]

Example Programs for ‘switch’ statement

1. Write a C program to display the grade.
#include<stdio.h>
void main()
{ char grade;
printf(“Enter the grade:”);
scanf(“%c”,&grade);
switch(grade)
{

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 10
 case ‘O’: printf(“Outstanding”);
break;
case ‘A’: printf(“Excellent”);
break;
case ‘B’: printf(“Good”);
break;
case ‘C’: printf(“Fair”);
break;
case ‘F’: printf(“Fail”);
break;
default : printf(“Invalid grade”);
}
}

2. Write a C program to enter a number from 1 to 7 and display the corresponding day of
the week using switch.
#include<stdio.h>
void main()
{ int day;
printf(“Enter any number:”);
scanf(“%d”,&day);
switch(day)
{
case 1: printf(“Sunday”);
break;
case 2: printf(“Monday”);
break;
case 3: printf(“Tuesday”);
break;
case 4: printf(“Wednseday”);
break;
case 5: printf(“Thursday”);
break;
case 6: printf(“Friday”);
break;
case 7: printf(“Saturday”);
break;
default : printf(“invalid input”);
}
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 11
2.6 Iterative Statements or Loops
 A set of statements may have to be repeatedly executed for a specified number of times or till
a condition is satisfied.
 The statements that help us to execute a set of statements repeatedly for a specified
number of times or till a condition is satisfied are called as Iterative statements or
looping constructs or loop control statements.
 These statements are also called as Repetitive or Iterative Statements.
while loop

Loop Statements for loop

do-while loop

2.6.1 while Loop

 It is a control statement using which the programmer can give instructions to the
computer to execute a set of statements repeatedly as long as specified condition is
satisfied.
 The expression is evaluated to TRUE or FALSE in the beginning of the while loop. Hence it
is called as “Entry-Controlled Loop”.

Syntax of while loop

while(test expression) False
{ while(test expression)
Statements; L
O True
} O
P Statements
Statement x;

Statement x

Working principle
 The test expression is evaluated first, if it is TRUE then the set of statements within the body
of the loop are executed repeatedly as long as specified test expression is TRUE.
 If the test expression is false, then the control comes out of the loop by skipping the
execution of the statements within the body of the loop, by transferring the control to the
Statement x.

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 12
Example programs of ‘while’ loop
1. Write a C program to print the natural numbers from 1 to 10.
#include<stdio.h>
void main()
{
int i=1;
while(i<=10)
{
printf(“%d\n”,i);
i++;
}
}

2. Write a C program to print the natural numbers from 1 to n.

#include<stdio.h>
void main()
{
int i=0,n;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
while(i<=n)
{
printf(“%d\n”,i);
i++;
}
}

3. Write a C program to print the natural numbers from n to 1.

#include<stdio.h>
void main()
{
int n,i;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
i=n;
while(i>=1)
{
printf(“%d\n”,i);
i--;
}
}

4. Write a C program to calculate the sum of the first 10 natural numbers.

#include<stdio.h>
void main()

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 13
 {
int i=1,sum=0;
while(i<=10)
{
sum=sum+i;
i++;
}
printf(“\nSum=%d”,sum);
}

5. Write a C program to print the characters from A to Z.

#include<stdio.h>
void main()
{
char ch= ‘A’;
while(ch<= ‘Z’)
{
printf(“%c\t”,ch);
ch++;
}
}

6. Write a C program to find the factorial of a given number using while statement.
#include<stdio.h>
void main()
{
int fact=1,i=1,n;
printf(“Enter the value of n:\n”);
scanf(“%d”,&n);
while(i<=n)
{
fact=fact*i;
i++;
}
printf(“Factorial of a given number is=%d”,fact);
}

7. Write a C program to read a number and determine whether it is palindrome or not.

#include<stdio.h>
void main()
{ int digit,rev=0,num,n;
printf("Enter the number:\n");
scanf("%d",&num);
n=num;
while(num!=0)
{
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 14
 digit=num%10;
rev=rev*10+digit;
num=num/10;
}
printf("The reversed number is=%d\n",rev);
if(n==rev)
printf(“ The number is a palindrome”);
else
printf(“The number is not a palindrome”);
}

8. Program to find GCD and LCM of 2 numbers.

#include<stdio.h>
void main()
{ int a,b,m,n,gcd,lcm,rem;
printf("Enter the value for m and n :\n");
scanf("%d %d", &a, &b);
m=a;
n=b;
while(n!=0) OUT PUT:
{ Enter the value for m and n:
rem=m%n; 6
m = n; 12
The GCD of 6 12 numbers is= 6
n = rem;
The LCM of 6 12 numbers is= 12
}
gcd = m;
lcm = ( a * b ) / gcd;
printf("The GCD of %d %d numbers is=%d\n", a, b, gcd );
printf("The LCM of %d %d numbers is=%d\n", a, b, lcm );
}

2.6.2 for Loop (Counter- Controlled Loop)

 It is a control statement using which the programmer can give instructions to the
computer to execute a set of statements repeatedly for a specific number of times.
 It is also called as entry controlled loop or pretest loop.

Syntax of for loop

for(initialization ;test expression; increment/decrement)
{
Statements;
}
Statement x;

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 15
Flowchart
False
for(initialization ;test expression; increment/decrement)
L
O
O True
P
Statements

Statement x

Working Principle
 initialization: In this section loop variable is initialized, like i=0, n=0, i=1,n=1. (i and n are
loop variables).
 test expression: The test expression may be a relational expression or logical expression or
both, which is evaluated to TRUE or FALSE. Depending on the value of the test expression,
the body of the loop is executed. If the test expression is TRUE, then the body of the loop is
executed. This process of execution of body of the loop is continued as long as the
expression is TRUE. When the test expression becomes FALSE, execution of the statements
contained in the body of the loop are skipped, thereby transferring the control to the
Statement x, which immediately follows the for loop.
 increment/decrement: This section increments or decrements the loop variables after
executing the body of the loop.

Infinite Loop
 A for loop without a test expression is an Infinite loop.
Ex: for(i=0; ;i++)
{
………
} is an “infinite” loop.

Example programs of ‘for’ loop

1. Write a C program to print the natural numbers from 1 to 10.
#include<stdio.h>
void main()
{
int i;
for(i=1;i<=10;i++)
{
printf(“%d\n”,i);
}
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 16
 }

2. Write a C program to print the natural numbers from 1 to n.

#include<stdio.h>
void main()
{
int i,n;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
for(i=0;i<n;i++)
{
printf(“%d\n”,i);
}
}

3. Write a C program to compute the sum of the series 1+2+3+……+n.

#include<stdio.h>
void main()
{
int i,sum=0,n;
clrscr();
printf(“Enter the number of terms:”);
scanf(“%d”,&n);
for(i=1;i<=n;i++)
{
sum=sum+i;
}
printf(“\nSum of the series=%d”,sum);

4. Write a C program to generate ‘n’ Fibonacci numbers.

#include<stdio.h>
void main()
{
int n,f1,f2,f3,i;
f1=0;
f2=1;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
if(n==1)
printf(“%d”,f1);
else
{
printf(“%d\t%d\t”,f1,f2);
for(i=3;i<=n;i++)
{
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 17
 f3=f1+f2;
printf(“%d\t”,f3);
f1=f2;
f2=f3;
}
}
}

5. Write a C program to print the characters from A to Z.

#include<stdio.h>
void main()
{
char ch;

for(ch=’A’;ch<=’Z’;ch++)
{

printf(“%c\t”,ch);
}

}
Output: A B C D E F ----------------------------------------Z

6. Write a C program to find the factorial of a given number using for statement.
#include<stdio.h>
void main()
{
int fact=1,i,n;

printf(“Enter an integer:\n”);
scanf(“%d”,&n);
for(i=1;i<=n;i++)
{
fact=fact*i;
}
printf(“Factorial of a given number is=%d”,n,fact);

2.6.3 do-while Loop

 do- while loop is used when a set of statements have to be repeatedly executed at least
once.
 Since the test expression is evaluated to TRUE or FALSE at the end of do-while loop, the do-
while loop is called as exit-controlled loop.
 The while and for loop test the expression at the top.
 The do-while tests the expression at the bottom after making each passes through the loop
body.
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 18
Syntax of do-while loop
Statements
do{
Statements;

} while(test expression); True

while(test expression);
Statement x;
False

Statement x

Working Principle
 It is a post-test or bottom-testing loop and hence the statements contained within the body
of the loop are executed first and then the expression is evaluated to TRUE or FALSE. If it is
TRUE, then the statements contained within the body of the loop are executed once again
and the expression is evaluated. This is repeated until the expression is evaluated to FALSE.
 If the expression is FALSE, then the control comes out of the loop by skipping the execution
of the statements within the body of the loop, by transferring the control to the Statement x.

2.6.4 Difference between while loop and do-while loop

while loop do-while loop
1 It is entry controlled loop. (top-testing) It is exit controlled loop. (bottom-testing)
2 It is pre-test loop. It is post-test loop.
3 Syntax: Syntax:
while(expression) do {
{ Statements;
Statements; } while(expression);
}
4 Working Principle: If the expression is Working Principle: On reaching do
evaluated to true, then the statements withinstatement, it proceeds to execute the
the body of loop are executed. If the statements within the body of the loop
expression is false, then the statements within
irrespective of the test expression. If the
the body of the loop are not executed. expression is evaluated to true, then the
statements within the body of loop are
executed once again. If the expression is
false, then the statements within the body
of the loop are not executed.
5 In while loop, while statement does not ends In do-while loop, while statement ends
with semicolon (;). with semicolon (;).
6 Ex: Ex:
int i=0,sum=0; int i=0,sum=0;
while(i<=n) do{
{ sum=sum+i;
sum=sum+i; i=i+1;
i=i+1; }while(i<=n);
}
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 19
7 Flowchart: Flowchart:
Statements
False
while(test expression)

True
True
Statements while(test expression);

False

Statement x Statement x

Example programs of ‘do-while’ loop

1. Write a C program to print the natural numbers from 1 to n.
#include<stdio.h>
void main()
{
int i=1,n;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
do
{
printf(“%d\n”,i);
i++;
}while(i<=n);
}

2. Write a C program to calculate the sum and average of first ‘n’ numbers.
#include<stdio.h>
void main()
{
int n,i=0,sum=0;
float avg=0.0;
printf(“Enter the value of n:”);
scanf(“%d”,&n);
do
{
sum=sum+i;
i++;

}while(i<=n);
avg=sum/n;
printf(“The sum of numbers=%d”,sum);
printf(“The average of numbers=%f”,avg);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 20
2.7 Nested Loops
 The loops that can be placed inside other loops.
 It will work with any loops such as while, do-while and for.
 Nested loop is commonly used with the for loop because this is easiest to control.
 The ‘inner for loop’ can be used to control the number of times that a particular set of
statements will be executed.
 The ‘outer for loop’ can be used to control the number of times that a whole loop is repeated.
Example Program: Write a C program to print the following output.
1
1 2
#include<stdio.h> 1 2 3
void main( ) 1 2 3 4
{ 1 2 3 4
int i,j;
for(i=1;i<=5;i++)
{
printf(“\n”);
Outer for(j=1;j<=i;j++)
for loop { Inner
printf(“%d”,j); for loop
}
}
}

2.8 Unconditional Branch statements

2.8.1 break statement
 In C, break statement is used to terminate the execution of the nearest enclosing loop in
which it appears.
 It is ‘jump’ statement which can be used in switch statement and loops.
 The break statement in switch statement causes the control to come out of the switch
statement and transfers the control to the statement which follows the switch statement.
Ex:
switch(ch)
{
case 1: printf(“1st statement”);
break;
case 2: printf(“2nd statement”);
break;
default: printf(“nth statement”);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 21
 If ‘case 1’ is selected by the programmer then the output will be 1 st statement only. It
will directly come out of the switch.

 If break is executed in a loop (for/while/do-while) then the control comes out of the loop
and the statement following the loop will be executed.
Syntax
1. while(…)
{
……
if(condition)
break;
……
} Transfers the control out of the while loop
……

2. do
{
……
if(condition)
break;
…… Transfers the control out of the do-while loop
}while(condition);
……

3. for(…)
{
……
if(condition)
break;
……
} Transfers the control out of the for loop
……

Example programs of ‘break’ statement

1. Write a C program to print the numbers (0 to 4) using break.
#include<stdio.h>
void main()
{
int i=0;
while(i<=10)
{
if(i==5)
break;
printf(“%d\n”,i);
i=i+1;
}
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 22
2.8.2 continue statement
 During execution of a loop, it may be necessary to skip a part of the loop based on some
condition. In such cases, we use continue statement.
 The continue statement is used only in the loops to terminate the current iteration and
continue with the remaining iterations.

Syntax:
1. while(… )
{
if(condition) Transfers the control to the expression of the while loop
continue;
……….
}
……….

2. do
{
……
if(condition)
continue;
…… Transfers the control to the expression of the do-while loop
}while(condition);
……
3. for(…)
{
……
if(condition) Transfers the control to the expression of the for loop
continue;
……
}
……

Example programs of ‘continue’ statement

1. Write a C program to display the output in the following form 1 3 4 5
#include<stdio.h>
void main()
{
int i;
for(i=1;i<=5;i++)
{
if(i==2)
continue;
printf(“%d”,i);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 23
Output: 1 3 4 5 [if i==2 then the continue statement is executed and the statements following
continue are skipped]

2.8.3 goto statement

 The goto statement is a ‘jump’ statement that transfers the control to the specified
statement (Label) in a program unconditionally.
 The specified statement is identified by ‘label’( symbolic name ). Label can be any valid
variable name that is followed by a colon (:).
Syntax

goto label; label:

………… Statements
…………. …………
label: …………
Statements goto label;
Forward Jump Backward Jump

Example programs of ‘goto’ statement

1. Write a C program to calculate the sum of all numbers entered by the user.
#include<stdio.h>
void main()
{
int n,i,sum=0;
printf(“Enter the number:\n”);
scanf(“%d”,&n);
sum=i=0;
top: sum=sum+n;
i=i+1;
if(i<=n) goto top;
printf(“Sum of Series=%d”,sum);

2.9 Finding Roots of Quadratic Equations

 Quadratic Equations ax2+bx+c=0.
−𝒃±√𝒃𝟐 −𝟒𝒂𝒄
 Formula for calculating Roots of Quadratic equations. 𝒙 =
𝟐𝒂
#include<stdio.h>
#include<math.h>
void main()
{

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 24
 float a,b,c,disc,root1,root2,realp,imgp;
printf("enter the co-efficients\n");
scanf("%f%f%f",&a,&b,&c);
if(a==0||b==0||c==0)
{
printf("invaled input");
exit(0);
}
disc=b*b-4*a*c;
printf("discriminate=%f\n",disc);
if(disc==0)
{
root1=root2=-b/(2*a);
printf("roots are equal\n");
printf("root1=%f\n root2=%f\n",root1,root2);
}
else if(disc>0)
{
root1=(-b+sqrt(d))/(2*a);
root2=(-b-sqrt(d))/(2*a);
printf("roots are distinct\n");
printf("root1=%f\n root2=%f\n",root1,root2);
}
else
{
printf("roots are imaginary\n");
realp=-b/(2*a);
imgp=sqrt(fabs(d))/(2*a);
printf("root1=%f+i%f\n",realp,imgp);
printf("root2=%f-i%f\n",realp,imgp);
}
}
}

2.10 Write a C Program to display the following by reading the number of rows as input,

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 25
 #include <stdio.h>
void main()
{
int i,j,n;
printf("Input number of rows : ");
scanf("%d",&n);
for(i=0;i<=n;i++)
{
/*print blank spaces */
for(j=1;j<=n-i;j++)
printf(" ");
/* Display number in ascending order upto middle*/
for(j=1;j<=i;j++)
printf("%d",j);
/* Display number in reverse order after middle */
for(j=i-1;j>=1;j--)
printf("%d",j);
printf("\n");
}
}

2.11 Computation of Binomial Coefficients

 The binomial coefficient C(n,r) or nCr is the number of ways of picking ‘r’ unordered
outcomes from ‘n’ possibilities, also known as a combination or combinatorial number. The
number of ways that r objects can be chosen from among n objects;
n
Cr = n ! /(n - r)! * r !
Ex: C Program to Calculate Binomial coefficient.
#include<stdio.h>
void main()
{
int i,n,r;
long int x,y,z,nCr;
printf(“enter the value of n and r\n”);
scanf(“%d %d”, &n, &r);
Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 26
 x = y = z = 1;
for(i = n; i >=1; i--)
{
x = x * i; Output:
} Enter the value of n and r:
6
for(i = n-r; i >=1; i--)
2
{ 6C2 = 15
y = y * i;
}
for(i = r; i >=1; i--)
{
z = z * i;
}
nCr = x / (y * z);
printf(“%d C %d= %d”, n ,r, nCr);
}

Dr. Azizkhan F Pathan, Prof. Meghana G R, Prof. Kotramma T S, Dept. of CS&E, JIT, Davangere 27