Scribd
Upload
117 views1 page

ILPC HDPE 7000F Technical Data Sheet V.2

Uploaded by

nishant
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views1 page

ILPC HDPE 7000F Technical Data Sheet V.2

Uploaded by

nishant
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ILPC HDPE 7000F

HIGH DENSITY POLYETHYLENE

DESCRIPTION
HD-7000F is a high molecular weight, high density polyethylene copolymer which has a broad molecular weight distribu on. The design of the
product, molecular architecture and density, gives it a unique combina on of easy extrusion and high melt strength with strong physical
proper es which makes it suitable for producing thin films with excellent strength and rigidity.
TYPICAL APPLICATIONS
HD- 7000F is recommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping
bags and high-quality thin films for mul -wall sack liners and replacement for thin paper products. Films produced with this product can be
readily treated and printed to give high quality graphics.

TYPICAL PROPERTY VALUES

PROPERTIES TYPICAL VALUES UNITS TEST METHODS

POLYMER PROPERTIES (1)

Melt Flow Rate (MFR)


at 190°C and 5 kg load 0.04 g/10 min ISO 1133
Density at 23°C (1) 952 kg/m³ ISO 1183
MECHANICAL PROPERTIES (2)
Tensile Stress at Yield 27 MPa ISO 527-1/-2
Tensile Stress at Break >24 MPa ISO 527-1/-2
Elonga on at Break >500 % ISO 527-1/-2
Charpy Impact strength NB kJ/m² ISO 179-1
Shore hardness 64 D scale ISO 868
Stress cracking resistance >600 Hr ASTM 1693
Vicat so ening temperature 131 ºC ISO 11357
Mel ng temperature 124 ºC ISO 306
(1) Typical values: not to be construed as specifica on limits.
(2) Based on compression molded sheet. Compression molding of test specimen according to ISO 1872-2 Condi oning of test specimen: temp. 23 °C, rela ve
humidity 50 %, 24 hours

PROCESSING CONDITIONS
Typical processing condi ons for HD-7000F are:
- Melt Temperature: 200 - 215°C
- Frost line Height: 6-8 mes die Ø
STORAGE AND HANDLING
Polyethylene material should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry
and preferably don't exceed 50°C. ILPC would not give warranty to bad storage condi ons which may lead to quality deteriora on such as color
change, bad smell and inadequate product performance.
Packaging
25 kg bag ,1375 Kg shrink film palle zed.

Complex Address: Ilam, Chavar, IlamPetrochemical company


Address: Tehran, Sheykh Bahaiee Sq., No. 18, 5th floor of Rayan Vanak Building - Ilam Petrochemical Co.
Email: [email protected] Web site: www.ilampetro.com
Revision 2024-01

You might also like