1 Ecy-S1000 SP
1 Ecy-S1000 SP
1 Ecy-S1000 SP
ECY-S1000 Series
Control, Automation and Overview
Connectivity Servers
The ECY-CSC is sized to cost-effectively meet the requirements of
any HVAC application from small to medium to large systems. The
most capable Connected System Controller model can be expanded
to support up to 20 input/output (I/O) modules (up to 320 I/Os) while
being able to adapt to new requirements as the need arises.
A connecting cable is used to connect successive rows of modules
within a controls’ cabinet to provide power and communication.
Accessories
ECLYPSE Wi-Fi Adapter Wi-Fi Adapter for ECLYPSE Connected Controllers.
ECLYPSE Open-To-Wireless™ Adapter EnOcean communication protocol adapter for ECLYPSE Connected Controllers.
Product Specifications
Power Supply Input Supported Smart Room Control Components
Voltage 18VDC Maximum number of standard 12
Power Consumption 8.9W; external loads excluded room devices supported per
controller combined1
Communications Allure EC-Smart-Vue Series2 12
Ethernet Connection Speed 10/100 Mbps
Allure EC-Smart-Comfort 6
Addressing IPv4 or Hostname Series
BACnet Profile BACnet Building Controller (B- Allure EC-Smart-Air Series2 6
BC)), AMEV AS-A and AS-B
EC-Multi Sensor 4
BACnet Listing BTL, WSP B-BC
ECx-Light-4 / ECx-Light-4D / 4
BACnet Interconnectivity BBMD forwarding capabilities ECx-Light-DALI
BACnet MS/TP to BACnet/IP
ECx-Blind-4 / ECx-Blind-4LV 4
routing
BACnet Transport Layer IP & MS/TP (optional) Maximum number of Bluetooth 6
low energy room devices per
Web Server Protocol HTML5 controller combined 3
Web Server Application REST API Allure UNITOUCH™ 2
Interface
EC-Multi-Sensor-BLE 4
BACnet MS/TP or Modbus 1 × RS-485 serial 1. For more details about supported quantities, see the ECLYPSE Selection
RTU communications ports Tool.xlsm spreadsheet file available for download from SmartSource.
2. A controller can support a maximum of 2 Allure sensor models equipped with a
RS-485 Wiring 1-pair + Common/shield CO2 sensor. Any remaining connected sensors must be without a CO2 sensor.
RS-485 EOL Resistor Built-in 3. A mixed architecture with standard room devices and Bluetooth low energy
enabled devices is not recommended.
RS-485 Baud Rates 9600, 19 200, 38 400, or 76 800
bps Hardware
RS-485 Addressing Controller’s Web Configuration Processor Sitara ARM processor
Interface CPU Speed 1GHz
Modbus TCP Devices must be on the same Memory 4GB Non-volatile Flash
subnet (applications & storage)
Wireless Adapter Optional, USB Port Connection 512MB RAM
Wi-Fi Communication Protocol IEEE 802.11b/g/n and 802.11s Real Time Clock (RTC) Real Time Clock with
rechargeable battery
Wi-Fi Network Types Client, Access Point, Hotspot Supports SNTP network time
synchronization
RTC Battery 20 hours charge time, 20 days
discharge time
Up to 500 charge / discharge
cycles
Cryptographic Module FIPS 140-2 Level 1 Compliant
Ethernet 2 switched RJ-45 Ethernet ports
(Supported Protocols: BACnet/
IP, Modbus TCP, NTP, and
REST)
USB Connections 2 × USB 2.0 Ports
1 × Micro-USB 2.0 Ports
RS-485 Serial Communications Screw terminals (Supported
Protocols: BACnet MS/TP or
Modbus RTU)
2/3 ECY-S1000
Subnet RJ-45 Environmental
Green LED Power status, Subnet TX, Operating Temperature 32 to 122°F (0 to 50°C)
RS-485 TX, and Ethernet Traffic Storage Temperature -22 to 158°F (-30 to 70°C),
Orange LED Controller status, Subnet RX, Relative Humidity 0 to 90% non-condensing
RS-485 RX, and Ethernet
Ingress Protection Rating IP20
Speed
Nema Rating 1
Open-to-Wireless Adapter
Communication Protocol EnOcean wireless standard
1
Standards and Regulations
CE Emission EN61000-6-3: 2007+A1:2011
Connector Type USB
2 CE Immunity EN61000-6-1: 2007
Number of Wireless Inputs 18
FCC Compliance with FCC rules part
15, subpart B, class B
UL Listed (CDN & US) UL916 Energy management
1. Available when an optional external ECLYPSE Open-to-Wireless Adapter is
connected to the controller. Refer to the Open-to-Wireless Application Guide for a
equipment
list of supported EnOcean wireless modules.
2. Some wireless modules may use more than one wireless input from the controller.
Mechanical
Dimensions (H × W × D) 4.74 × 3.57 × 2.31" (120.31 ×
90.67 × 58.56mm)
Shipping weight 0.85lbs (0.39kg)
Mounting DIN rail or screw mounting
Enclosure Material FR/ABS
Enclosure Rating1 Plastic housing, UL94-V0
flammability rating
Plenum rating per UL1995
1. All materials and manufacturing processes comply with the RoHS directive and are
marked according to the Waste Electrical and Electronic Equipment (WEEE)
directive
0.83 21.08
5.13" 130.29
0.73 18.54
3/3 ECY-S1000_SP_10_EN