On the following pages you will find the article numbers required for

inquiries and orders of the non return valves, accessories, and spare parts
of our catalogue program.
You will also find drawings with the installation dimensions.
The description of the products and all technical data sheets will be
available on our new website, soon.
If you have any question, are looking for a different version, or if you would
like to place an order, please send an e-mail to our sales team at
[email protected].

Non return valves Please keep in mind that it's necessary that you have to define and
communicate the following characteristics so that we can process your
request:
1. Product type / version
2. Size
3. Material steel with product contact
4. Material seals with product contact
5. Finish steel
6. Tube connections
7. Operation
8. Position sensors / control
9. Certificates
Instead of the a.m. characteristics you can send us the Nocado article
number.

Notice:
All products of Nocado GmbH are under constant technical review. So, changes are reserved. Therefore, the
technical data, images, and descriptions in our catalogue are therefore non-binding and exclude claims that may be
derived from them.
The data in our catalogue is based on the status at the date of its publishing. Earlier catalogues become void,
automatically.
All rights are reserved by Nocado GmbH. Reprints, copies, translations, and use on your websites or in your
webshop, even if only partially, require the prior written approval of Nocado GmbH.
v200828 • Copyright Nocado GmbH
v200828
Table of contents Table of contents

1.9 Non return valves

1.9.1 Non return valves • Disk type page

Check valve, disk type, weld ends (for tubing according to DIN 11850 line 2) (770S) .......................... 1.9.1-1
Check valve, disk type, between flanges (for tubing according to DIN 11850 line 2)............................. 1.9.1-1
Check valve, disk type, between flanges (welding bevel according to DIN 11850) (770N) ................. .1.9.1-1
Check valve, disk type, weld ends, inch OD (770Z) ....................................................................................... 1.9.1-1
Check valve, disk type, between flanges, inch OD........................................................................................... 1.9.1-3
Check valve, disk type, male / weld end (weld. bevel according to DIN 11850) (770) ......................... .1.9.1-3
Check valve, disk type, male / weld end, inch OD (770Z)............................................................................. 1.9.1-3

1.9.2 Non return valves • Ball type

Check valve, ball type, weld ends (according to DIN 11850 line 2) (770K) .............................................. 1.9.2-1
Check valve, ball type, weld ends, inch OD (770K) ........................................................................................ 1.9.2-1
Check valve, ball type, DIN 11851 male / weld end DIN (770K) ............................................................... .1.9.2-1
Check valve, ball type, DIN 11851 male / weld end inch OD (770K) ........................................................ 1.9.2-1

1.9.3 Non return valves • Spare parts

Spring for check valve, disk type........................................................................................................................... 1.9.3-1
Spring for check valve, disk type between flanges............................................................................................ 1.9.3-1
Set of gaskets for check valve, disk type............................................................................................................ .1.9.3-1
Set of gaskets for check valve, disk type between flanges .............................................................................. 1.9.3-1
Ball for check valve, ball type................................................................................................................................. 1.9.3-3

Nocado GmbH • Brendelweg 159 • D-27755 Delmenhorst • Tel. +49 4221 80099 830 • Fax: +49 4221 80099 8930 Nocado GmbH • Brendelweg 159 • D-27755 Delmenhorst • Tel. +49 4221 80099 830 • Fax: +49 4221 80099 8930
www.nocado.com • E-Mail: [email protected] www.nocado.com • E-Mail: [email protected]
v200828 • Copyright Nocado GmbH
v200828
1.9.1 check valves • disc type 1.9.1 check valves • disc type

check valve, disk type, weld ends (for tub. acc. DIN 11850 line 2) (770S)

check valve, disk type, weld ends (for tub. acc. DIN
304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt
DN d1 d4 l weight (kg) DN Ident number Ident number Ident number Ident number
25 26 29 81 1,020 25 E 167.08.11N.0025 E 167.08.21N.0025 E 167.08.12N.0025 E 167.08.22N.0025
32 32 35 96 1,140 32 E 167.09.11N.0025 E 167.09.21N.0025 E 167.09.12N.0025 E 167.09.22N.0025
40 38 41 106 2,120 40 E 167.10.11N.0025 E 167.10.21N.0025 E 167.10.12N.0025 E 167.10.22N.0025

11850 line 2) (770S)

50 50 53 107 2,430 50 E 167.11.11N.0025 E 167.11.21N.0025 E 167.11.12N.0025 E 167.11.22N.0025
65 66 70 132 3,580 65 E 167.12.11N.0025 E 167.12.21N.0025 E 167.12.12N.0025 E 167.12.22N.0025
80 81 85 151 5,780 80 E 167.14.11N.0025 E 167.14.21N.0025 E 167.14.12N.0025 E 167.14.22N.0025
100 100 104 170 9,660 100 E 167.15.11N.0025 E 167.15.21N.0025 E 167.15.12N.0025 E 167.15.22N.0025

check valve, disk type, betw. flanges (for tub. acc. DIN 11850 line 2)
304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt

check valve, disk type, betw. flanges (for tub. acc.

DN d1 d4 l weight (kg) DN Ident number Ident number Ident number Ident number
25 26 29 90 1,650 25 E 167.08.11N.0027
E 167.08.21N.0027
E 167.08.12N.0027 E 167.08.22N.0027

32 32 35 90 2,020 32 E 167.09.11N.0027
E 167.09.21N.0027
E 167.09.12N.0027 E 167.09.22N.0027

40 38 41 100 1,990 40 E 167.10.11N.0027
E 167.10.21N.0027
E 167.10.12N.0027 E 167.10.22N.0027

DIN 11850 line 2)

50 50 53 110 2,530 50 E 167.11.11N.0027
E 167.11.21N.0027
E 167.11.12N.0027 E 167.11.22N.0027

65 66 70 120 3,270 65 E 167.12.11N.0027
E 167.12.21N.0027
E 167.12.12N.0027 E 167.12.22N.0027

80 81 85 145 5,900 80 E 167.14.11N.0027
E 167.14.21N.0027
E 167.14.12N.0027 E 167.14.22N.0027

100 100 104 150 9,800 100 E 167.15.11N.0027
E 167.15.21N.0027
E 167.15.12N.0027 E 167.15.22N.0027

check valve, disk type, betw. flanges ( weld. bevel acc. DIN 11850) (770N)

check valve, disk type, betw. flanges ( weld. bevel acc.

304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt
DN d1 d4 l weight (kg) DN Ident number Ident number Ident number Ident number
25 26 31 90 1,650 25 E 167.08.11N.0007 E 167.08.21N.0007 E 167.08.12N.0007 E 167.08.22N.0007
32 32 37 90 2,020 32 E 167.09.11N.0007 E 167.09.21N.0007 E 167.09.12N.0007 E 167.09.22N.0007
40 38 43 100 1,990 40 E 167.10.11N.0007 E 167.10.21N.0007 E 167.10.12N.0007 E 167.10.22N.0007

DIN 11850) (770N)

50 50 55 110 2,530 50 E 167.11.11N.0007 E 167.11.21N.0007 E 167.11.12N.0007 E 167.11.22N.0007
65 66 72 120 3,270 65 E 167.12.11N.0007 E 167.12.21N.0007 E 167.12.12N.0007 E 167.12.22N.0007
80 81 87 145 5,900 80 E 167.14.11N.0007 E 167.14.21N.0007 E 167.14.12N.0007 E 167.14.22N.0007
100 100 106 150 9,800 100 E 167.15.11N.0007 E 167.15.21N.0007 E 167.15.12N.0007 E 167.15.22N.0007

check valve, disk type, weld ends, inch OD (770Z)

check valve, disk type, weld ends, inch OD (770Z)

304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt
DN d1 d4 l weight (kg) DN Ident number
Ident number
Ident number
Ident number

25 22.1 25.4 73 1,020 25 E 167.08.11N.0026 E 167.08.21N.0026 E 167.08.12N.0026 E 167.08.22N.0026
32 28.5 31.8 96 1,140 32 E 167.09.11N.0026 E 167.09.21N.0026 E 167.09.12N.0026 E 167.09.22N.0026
40 34.8 38.1 106 2,120 40 E 167.10.11N.0026 E 167.10.21N.0026 E 167.10.12N.0026 E 167.10.22N.0026
50 47.5 50.8 107 2,430 50 E 167.11.11N.0026 E 167.11.21N.0026 E 167.11.12N.0026 E 167.11.22N.0026
65 60.2 63.5 132 3,580 65 E 167.12.11N.0026 E 167.12.21N.0026 E 167.12.12N.0026 E 167.12.22N.0026
80 72.9 76.1 151 5,780 80 E 167.13.11N.0026 E 167.13.21N.0026 E 167.13.12N.0026 E 167.13.22N.0026
100 97.4 101.6 170 9,660 100 E 167.15.11N.0026 E 167.15.21N.0026 E 167.15.12N.0026 E 167.15.22N.0026

1.9.1-1 Technical modifications, price changes and errors subject to alterations. A1/1 A1/1 Technical modifications, price changes and errors subject to alterations. 1.9.1-2
v200828 • Copyright Nocado GmbH
v200828
1.9.1 check valves • disc type 1.9.1 check valves • disc type

check valve, disk type, betw. flanges, inch OD

304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt

check valve, disk type, betw. flanges, inch OD

DN d1 d4 l weight (kg) DN Ident number
Ident number
Ident number
Ident number

1" 22.1 25.4 90 1,650 1" E 167.08.11N.0012 E 167.08.21N.0012 E 167.08.12N.0012 E 167.08.22N.0012
1 1/4" 28.5 31.8 90 2,020 1 1/4" E 167.09.11N.0012 E 167.09.21N.0012 E 167.09.12N.0012 E 167.09.22N.0012
1 1/2" 34.8 38.1 100 1,990 1 1/2" E 167.10.11N.0012 E 167.10.21N.0012 E 167.10.12N.0012 E 167.10.22N.0012
2" 47.5 50.8 110 2,530 2" E 167.11.11N.0012 E 167.11.21N.0012 E 167.11.12N.0012 E 167.11.22N.0012
2 1/2" 60.2 63.5 120 3,270 2 1/2" E 167.12.11N.0012 E 167.12.21N.0012 E 167.12.12N.0012 E 167.12.22N.0012
3" 72.9 76.2 145 5,900 3" E 167.13.11N.0012 E 167.13.21N.0012 E 167.13.12N.0012 E 167.13.22N.0012
4" 97.4 101.6 150 9,800 4" E 167.15.11N.0012 E 167.15.21N.0012 E 167.15.12N.0012 E 167.15.22N.0012

check valve, disk type, male / weld end ( weld. bevel acc. DIN 11850) (770)

check valve, disk type, male / weld end ( weld. bevel

304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt
DN d1 d4 d5 l weight (kg) DN Ident number
Ident number
Ident number
Ident number

25 26 31 52x1/6" 88 1,080 25 E 167.08.11N.0003 E 167.08.21N.0003 E 167.08.12N.0003 E 167.08.22N.0003
32 32 37 58x1/6" 103 1,200 32 E 167.09.11N.0003 E 167.09.21N.0003 E 167.09.12N.0003 E 167.09.22N.0003
40 38 43 65x1/6" 113 2,200 40 167.10.11N.0003 167.10.21N.0003 167.10.12N.0003 167.10.22N.0003

acc. DIN 11850) (770)

E * E E

50 50 55 78x1/6" 114 2,550 50 * 167.11.11N.0003 * 167.11.21N.0003 E 167.11.12N.0003 * 167.11.22N.0003

65 66 72 95x1/6" 140 3,700 65 E 167.12.11N.0003 E 167.12.21N.0003 E 167.12.12N.0003 E 167.12.22N.0003
80 81 87 110x1/4" 159 5,900 80 E 167.14.11N.0003 E 167.14.21N.0003 E 167.14.12N.0003 E 167.14.22N.0003
100 100 106 130x1/4" 180 9,800 100 * 167.15.11N.0003 E 167.15.21N.0003 E 167.15.12N.0003 E 167.15.22N.0003

check valve, disk type, male/ weld end, inch OD (770Z)

304 NBR polished 304 NBR matt 316 L NBR polished 316 L NBR matt

check valve, disk type, male/ weld end, inch OD

DN d1 d4 d5 l weight (kg) DN Ident number
Ident number
Ident number
Ident number

1" 22.1 25.4 52x1/6" 80 1,080 1" E 167.08.11N.0004 E 167.08.21N.0004 E 167.08.12N.0004 E 167.08.22N.0004
1 1/4" 28.5 31.8 58x1/6" 103 1,200 1 1/4" E 167.09.11N.0004 E 167.09.21N.0004 E 167.09.12N.0004 E 167.09.22N.0004
1 1/2" 34.8 38.1 65x1/6" 113 2,200 1 1/2" E 167.10.11N.0004 E 167.10.21N.0004 E 167.10.12N.0004 E 167.10.22N.0004
2" 47.5 50.8 78x1/6" 114 2,550 2" E 167.11.11N.0004 E 167.11.21N.0004 E 167.11.12N.0004 E 167.11.22N.0004
2 1/2" 60.2 63.5 95x1/6" 140 3,700 2 1/2" E 167.12.11N.0004 E 167.12.21N.0004 E 167.12.12N.0004 E 167.12.22N.0004

(770Z)
3" 72.9 76.1 104x1/6" 159 5,900 3" E 167.13.11N.0004 E 167.13.21N.0004 E 167.13.12N.0004 E 167.13.22N.0004
4" 97.4 101.6 130x1/4" 180 9,800 4" E 167.15.11N.0004 E 167.15.21N.0004 E 167.15.12N.0004 E 167.15.22N.0004

1.9.1-3 Technical modifications, price changes and errors subject to alterations. A1/1 A1/1 Technical modifications, price changes and errors subject to alterations. 1.9.1-4
v200828 • Copyright Nocado GmbH
v200828
1.9.2 check valves • ball type 1.9.2 check valves • ball type

check valve, ball type, weld ends (acc. DIN 11850 line 2) (770K)

check valve, ball type, weld ends (acc. DIN 11850 line
304 EPDM polished 304 NBR polished 316 L EPDM polished 316 L NBR polished
DN d1 d4 L weight (kg) DN Ident number
Ident number
Ident number
Ident number

25 26 29 91 - 25 E 167.08.11E.0019 E 167.08.11N.0019 E 167.08.12E.0019 E 167.08.12N.0019
32 32 35 96 - 32 E 167.09.11E.0019 E 167.09.11N.0019 E 167.09.12E.0019 E 167.09.12N.0019
40 38 41 100 - 40 E 167.10.11E.0019 E 167.10.11N.0019 E 167.10.12E.0019 E 167.10.12N.0019
50 50 53 112 - 50 E 167.11.11E.0019 E 167.11.11N.0019 E 167.11.12E.0019 E 167.11.12N.0019
65 66 70 161 -

2) (770K)
65 E 167.12.11E.0019
E 167.12.11N.0019 E 167.12.12E.0019 E 167.12.12N.0019
80 81 85 201 - 80 E 167.14.11E.0019 E 167.14.11N.0019 E 167.14.12E.0019 E 167.14.12N.0019

check valve, ball type, weld ends, inch OD (770K)

check valve, ball type, weld ends, inch OD (770K)

304 EPDM polished 304 NBR poliert 316 L EPDM polished 316 L NBR polished
DN d1 d4 L weight (kg) DN Ident number
Ident number
Ident number
Ident number

1" 22.1 25.4 90 - 1" E 167.08.11E.0021 E 167.08.11N.0021 E 167.08.12E.0021 E 167.08.12N.0021
1¼" 28.5 31.8 96 - 1¼" E 167.09.11E.0021 E 167.09.11N.0021 E 167.09.12E.0021 E 167.09.12N.0021
1½" 34.8 38.1 100 - 1½" E 167.10.11E.0021 E 167.10.11N.0021 E 167.10.12E.0021 E 167.10.12N.0021
2" 47.5 50.8 112 - 2" E 167.11.11E.0021 E 167.11.11N.0021 E 167.11.12E.0021 E 167.11.12N.0021
2½" 60.2 63.5 161 - 2½" E 167.12.11E.0021 E 167.12.11N.0021 E 167.12.12E.0021 E 167.12.12N.0021
3" 72.9 76.1 201 - 3" E 167.13.11E.0021 E 167.13.11N.0021 E 167.13.12E.0021 E 167.13.12N.0021

check valve, ball type, DIN 11851 male / weld end (770K)

check valve, ball type, DIN 11851 male / weld end

304 EPDM polished 304 NBR poliert 316 L EPDM polished 316 L NBR polished
DN d1 d4 d5 L weight (kg) DN Ident number
Ident number
Ident number
Ident number

25 26 31 52x1/6" 97 - 25 E 167.08.11E.0010 E 167.08.11N.0010 E 167.08.12E.0010 E 167.08.12N.0010
32 32 37 58x1/6" 103 - 32 E 167.09.11E.0010 E 167.09.11N.0010 E 167.09.12E.0010 E 167.09.12N.0010
40 38 43 65x1/6" 107 - 40 E 167.10.11E.0010 E 167.10.11N.0010 E 167.10.12E.0010 E 167.10.12N.0010
50 50 55 78x1/6" 119 - 50 E 167.11.11E.0010 E 167.11.11N.0010 E 167.11.12E.0010 E 167.11.12N.0010
65 66 72 95x1/6" 169 - 65 E 167.12.11E.0010 E 167.12.11N.0010 E 167.12.12E.0010 E 167.12.12N.0010

(770K)
80 81 87 110x1/4" 209 - 80 E 167.14.11E.0010 E 167.14.11N.0010 E 167.14.12E.0010 E 167.14.12N.0010

check valve, ball type, DIN 11851 male / weld end inch OD (770K)

check valve, ball type, DIN 11851 male / weld end

304 EPDM polished 304 NBR poliert 316 L EPDM polished 316 L NBR polished
DN d1 d4 d5 L weight (kg) DN Ident number
Ident number
Ident number
Ident number

1" 22.1 25.4 52x1/6" 97 - 1" E 167.08.11E.0022 E 167.08.11N.0022 E 167.08.12E.0022 E 167.08.12N.0022
1¼" 28.5 31.8 58x1/6" 103 - 1¼" E 167.09.11E.0022 E 167.09.11N.0022 E 167.09.12E.0022 E 167.09.12N.0022
1½" 34.8 38.1 65x1/6" 107 - 1½" E 167.10.11E.0022 E 167.10.11N.0022 E 167.10.12E.0022 E 167.10.12N.0022
2" 47.5 50.8 78x1/6" 119 -
inch OD (770K)

2" E 167.11.11E.0022 E 167.11.11N.0022 E 167.11.12E.0022 E 167.11.12N.0022

2½" 60.2 63.5 95x1/6" 169 - 2½" E 167.12.11E.0022 E 167.12.11N.0022 E 167.12.12E.0022 E 167.12.12N.0022
3" 72.9 76.1 104x1/6" 209 - 3" E 167.13.11E.0022 E 167.13.11N.0022 E 167.13.12E.0022 E 167.13.12N.0022

1.9.2-1 Technical modifications, price changes and errors subject to alterations. A1/1 A1/1 Technical modifications, price changes and errors subject to alterations. 1.9.2-2
v200828 • Copyright Nocado GmbH
v200828
1.9.3 check valves • spare parts 1.9.3 check valves • spare parts

spring for check valve, disk type

DN Dm Lo weight (kg) DN Ident number

25 / 1" 19 50 - 25 / 1" E 831.00.680.0015

spring for check valve, disk type

32 / 1¼" 21.5 62 - 32 / 1¼" E 831.00.680.0019
40 / 1½" 25 67 - 40 / 1½" E 831.00.680.0027
50 / 2" 25 79 - 50 / 2" E 831.00.680.0028
65-80 30.5 100 - 65-80 E 831.00.680.0039
2½"-3" 30.5 100 - 2½"-3" E 831.00.680.0039
100 / 4" 32 100 - 100 / 4" E 831.00.680.0042

spring for check valve, disk type betw. flanges

spring for check valve, disk type betw. flanges

DN Dm Lo weight (kg) DN Ident number

15-25 / 1" 19 39 - 15-25 / 1" E 831.00.680.0085
32 / 1¼" 21.6 40 - 32 / 1¼" E 831.00.680.0086
40 / 1½" 24.8 38 - 40 / 1½" E 831.00.680.0087
50 / 2" 24.8 68 - 50 / 2" E 831.00.680.0088
65 / 2½" 30 85 - 65 / 2½" E 831.00.680.0089
80 / 3" 30.5 85 - 80 / 3" E 831.00.680.0091
100 / 4" 32 71 - 100 / 4" E 831.00.680.0092

set of gaskets for check valve, disk type

EPDM NBR
DN weight (kg) DN Ident number
Ident number

set of gaskets for check valve, disk type

25 / 1" 0,006 25 / 1" E 267.08.6E0.0055
E 267.08.6N0.0055

32 / 1¼" 0,008 32 / 1¼" E 267.09.6E0.0055
E 267.09.6N0.0055

40 / 1½" 0,010 40 / 1½" E 267.10.6E0.0055
E 267.10.6N0.0055

50 / 2" 0,012 50 / 2" E 267.11.6E0.0055
E 267.11.6N0.0055

65 / 2 ½" 0,016 65 / 2 ½" E 267.12.6E0.0055
E 267.12.6N0.0055

80 / 3" 0,018 80 / 3" E 267.14.6E0.0055
E 267.14.6N0.0055

100 / 4" 0,026 100 / 4" E 267.15.6E0.0055
E 267.15.6N0.0055

set of gaskets for check valve, disk type betw. flanges

set of gaskets for check valve, disk type betw. flanges

EPDM NBR
DN weight (kg) DN Ident number
Ident number

15-25 / 1" - 15-25 / 1" E 267.08.6E0.0056
E 267.08.6N0.0056

32 / 1¼" - 32 / 1¼" E 267.09.6E0.0056
E 267.09.6N0.0056

40 / 1½" - 40 / 1½" E 267.10.6E0.0056
E 267.10.6N0.0056

50 / 2" - 50 / 2" E 267.11.6E0.0056
E 267.11.6N0.0056

65 / 2½" - 65 / 2½" E 267.12.6E0.0056
E 267.12.6N0.0056

80 / 3" - 80 / 3" E 267.14.6E0.0056
E 267.14.6N0.0056

100 / 4" - 100 / 4" E 267.15.6E0.0056
E 267.15.6N0.0056

1.9.3-1 Technical modifications, price changes and errors subject to alterations. A1/1 A1/1 Technical modifications, price changes and errors subject to alterations. 1.9.3-2
v200828 • Copyright Nocado GmbH
v200828
1.9.3 check valves • spare parts 1.9.3 check valves • spare parts

ball for check valve, ball type

EPDM NBR PTFE
DN weight (kg) DN Ident number
Ident number
Ident number

25 / 1" - 25 / 1" E 895.08.6E0.0046 E 895.08.6N0.0046 E 895.08.6T0.0046

32 / 1¼" - 32 / 1¼" 895.09.6E0.0046 895.09.6N0.0046 895.09.6T0.0046

ball for check valve, ball type

E E E

40 / 1½" - 40 / 1½" E 895.10.6E0.0046 E 895.10.6N0.0046 E 895.10.6T0.0046

50 / 2" - 50 / 2" E 895.11.6E0.0046 E 895.11.6N0.0046 E 895.11.6T0.0046

65 / 2" - 65 / 2" E 895.12.6E0.0046
E 895.12.6N0.0046 E 895.12.6T0.0046

3" - 3" E 895.13.6E0.0046
E 895.13.6N0.0046 E 895.13.6T0.0046

80 - 80 E 895.14.6E0.0046
E 895.14.6N0.0046 E 895.14.6T0.0046

1.9.3-3 Technical modifications, price changes and errors subject to alterations. A1/1 A1/1 Technical modifications, price changes and errors subject to alterations. 1.9.3-4
v200828 • Copyright Nocado GmbH
v200828