Commodore VIN Decoder (VB To ZB)
Commodore VIN Decoder (VB To ZB)
General
Watch
Michael FB/SCID
New Member
Jan 4, 2020 #1
:
COMMODORE VIN DECODER by Michael Holliday (VB to ZB)
OK, so the original post was made by "fuzzy2308" who hasn't been on here since
2015, so I don't expect his post to be updated. So here is a modified VIN list for
Commodores (VB to ZB etc.)
Multiple info sourced, including from:
http://www.vlturbo.com/vin_decoders/ (has issues with VZ decoding, just take out
the V. website may now be taken down)
https://www.uniquecarsandparts.com.au/holden_identification (EJ to EH/HK to
WB)
https://forums.justcommodores.com.au/
Note: Besides the three letters that are not allowed in the VIN itself (I, O and Q),
the letters U and Z and the digit 0 are not used for the model year code. The year
code is the model year for the vehicle
https://en.wikipedia.org/wiki/Vehicle_identification_number
Built plate year (and thus rego year) of Sept through to Dec will have the model
year after. Eg A car built in Sept/Oct/Nov/Dec in 2017 (and registered as a 2017
built car) will be a 2018 model (ZB Commodore with a year code of J).
I'm no VIN expert nor a Commodore owner, but a deal with stolen cars and use
this (and other) VIN checkers every day. Hope it helps you.
EG: 8X19KFZ944190K, =1986 VK Commodore Calais sedan with 3.3L EFI built in
New Zealand.
DIGIT:
1: Division, 2: Degree of luxury, 3&4: Body Style, 5: Engine Code, 6: Model Year, 7&8:
Assembly Plant, 9-13: Serial number, 14: Model series.
:
Digit 1: Manufacturer
8 - GMH.
Digit 5: engine
N=1.9ltr 4 cyl (VC 58kW Starfire)
D= 2.85 6 cyl (VB 64kW Red/VC 76kW blue)
L= 3.3 EST
K= 3.3 EFI
A?=4.2L 253 CI (VB 87kW Red/VC 100kW)
A?=4.2L 253CI dual exhaust (VB 96kW Red/VC 115kW)
C=4.9L 304CI (196kW VK HDT Brock SS Group III)
G=4.9L V8 (on VK HDT Brock SS)
T=5.0L 308CI (115/126kW VC)
R?= (on a ’84 VH)
For VL:
6=RB30E 3.0 EFI (non turbo)
7=RB20E 2.0 EFI (non turbo)
8=RB30ET 3.0 EFI Turbo.
J=5.0L V8
P=4.9L V8 (180kW HSV Walkinshaw)
Digit 6: year
H:1978, J:79, K:80, A:81, B:82, C:83, D:84, E:85, F:86, G:87, H:88
Digit 4: Model
Y=VY 2002-04
Z=VZ 2004-07
:
Z=VZ 2004-07
E=VE 2006-13
F=VF 2013-17
K= Long wheel base Statesman/Caprice WK 2003
L = Long wheel base Statesman/Caprice WL 2004/5
M= Long wheel base Statesman/Caprice WM 2006-2017
N= Long wheel base Caprice WN
ZB (2018 -> )
17 Digit VIN with Restraint Code and Check code
Digit 1-3: World Manufacturer Identifier.
W0=West Germany
V=Vauxhall
Digit 4: Model
Z=ZB
E=?Active belts with load limiters front/rear. Driver, passenger, side and curtain
airbags. Head airbag for 1st and 2nd rows.
uterass
U New Member
Hi all i have been trying to decode this vs ute model number as it has some extra
plugs etc under the bonnet, can someone help me out.?
Thanks
Share
General