Hitachi KP d20bp s3

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

CCD Color Camera

KP-D20BP-S3

Specifications

Hitachi Kokusai Electric Inc.

DWN
DSGN
CHKD Tokyo Japan
APPD
1. General
The KP-D20BP-S3 is a single CCD type color camera utilizing digital signal
processing in addition to digital control of the various correction and
adjustment functions to enable high quality images.
The high density CCD comprises 470,000 picture elements PAL and provides
clear pictures even under low illumination, in addition to high sensitivity and
resolution.
Important functions, including auto iris and auto white balance, allow use in
a wide range of CCTV systems for image processing, surveillance and other
applications.

2. Principal features
(1) Very small, light weight,Various functions
44 (W) x 44 (H) x 49 (D) mm , 130g
Y/C output standard equipment
RS-232C standard equipment

(2) High sensitivity and resolution


The high density interline type CCD sensor with on-chip microlenses
enables low-light pickup down to 0.3 lux (F 1.2 lens, AGC maximum) and
horizontal resolution of 470 TV lines.

(3) Digital signal processor (DSP)


Digital processing includes 2 H enhancer and contour correction to deliver
clear pictures and high signal to noise ratio (S/N). Picture control
parameters can also be adjusted with the aid of on-screen menus, thus
enabling optimum adjustments to match the application.

(4) Electronic shutter


The electronic shutter can be set in 10 steps from standard (off setting) 1/50
second to 1/30000 second. Auto electronic shutter (AES) operates to
1/180000 second. Even with a fixed iris lens, the shutter speed responds to
the amount of light to keep the signal output at optimum level.

(5) Backlight compensation


Backlight compensation can operate with either a video signal or control
voltage input type auto-iris lens. The sensing area can also be selected
according to usage conditions.
DWN
DSGN
CHKD Tokyo Japan
APPD
(6) Three white balance modes
Auto-tracking white balance (ATW) functions by detecting white color in the
scene at a color temperature from 2500 to 8000 Kelvin. Auto-white balance
control (AWC) is a preset type function whereby white color in the scene is
detected and white balance is automatically adjusted, then the setting
status is stored. Manual white balance allows adjusting red and blue gain
manually according to requirements.

(7) Text display


Up to 24 alphanumeric characters can be displayed at either the top or
bottom of the screen.

(8) Digital zoom


The screen can be smoothly enlarged up to 4 times.

(9) Picture quality menus


A wide variety of modes and parameters can be selected from menus and
adjusted by using rear panel key buttons.

3. Specifications

(1) Pickup element : Interline transfer type CCD (with on-chip microlenses)
Total pixels :795 (H) 596 (V)
Effective pixels :752 (H) 582 (V)
Scanning area :6.47 (H) 4.83 (V) mm
(equivalent to 1/2-inch pickup tube)
Unit cell size :8.6 (H) 8.3 (V) m

(2) Scanning system : 2:1 interlace


Frequency Horizontal : 15.625 kHz
Vertical : 50 Hz

(3) Sync system : Internal

DWN
DSGN
CHKD Tokyo Japan
APPD
(4) Video signal output : Composite video : 1.0 Vp-p/75 unbalanced
Video:0.7Vp-p positive or negative (negative picture)
Sync :0.3 Vp-p negative
Burst : 0.3 Vp-p more than 8 cycles
Subcarrier frequency : 4.433618 MHz 100 Hz
Connector : BNC type

Y/C outputs
Y:1.0Vp-p
Video:0.7Vp-p positive or negative (negative picture)
Sync :0.3 Vp-p negative
C:0.3Vp-p(Burst)
Impedance : 75 ohms unbalanced
Connector : Round multi-connector,12pin

(5) Remote control : RS-232C


Connector : Round multi-connector,4pin / 12pin

(6) S/N (luminance signal) : More than 50 dB


(standard gain, enhancer and gamma off)

(7) Resolution : Horizontal :More than 470 TV lines


Vertical :More than 350 TV lines

(8) Scene illumination range : 0.3 to 100,000 lux (F1.2, Auto-iris lens)

(9) Minimum illumination : 0.3 lux (F1.2, 3200 K, AGC 31dB.)

(10) Signal processing : Digital processing (input: 10 bits)

(11) AGC : On/off selectable


Max. gain at on setting selectable:6, 12, 21 and 31 dB
(factory setting is 21 dB)

DWN
DSGN
CHKD Tokyo Japan
APPD
(12) Electronic shutter speed : Selectable in 10 steps
: OFF(1/50), 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000,1/20000,1/30000 second,
and Auto

(13) Backlight compensation : On/off switchable


Sensing areas: selectable from 9 areas

(14) Auto-iris lens outputs : Video signal input type lens


(a) Luminance signal : 1.0 Vp-p/high impedance
Power supply : 12 VDC 60 mA
(b) Iris control voltage input (galvanometer) type lens
Coupling coil impedance
Damper : 1150 10 %
Drive : 190 10 %

(15) White balance Selectable auto-tracking (ATW), preset (AWC),


manual (MANUAL) ( R/B gain adjustment )

(16) Text display : One line of up to 24 alphanumeric characters


Selectable display position

(17) Digital zoom : Up to 4 , selectable enlarge position


Resolution loss with magnification (approx. 50 % at
2 zoom)

DWN
DSGN
CHKD Tokyo Japan
APPD
(18) Picture adjust menus : Modes and settings can be selected and adjusted
from on-screen menus
(1) Text display On/off, text edit, display position
(2) Backlight compensation Selectable on/off
(3) Level detect area Selectable
(4) Video level Adjustable
(5) AGC Selectable on/off, max. gain
(6) Shutter speed Selectable
(7) White balance Selectable mode
(8) Digital zoom Adjustable Wide(standard) to Tele(max.4 )
(9) Gamma correction Selectable on/off
(10) Chroma level Adjustable
(11) Black level Adjustable
(12) Enhancer Adjustable
(13) Video signal polarity Selectable negative/positive

(19) Lens mount : C/CS mount (C mount adaptor option)

(20) Power supply : 12V DC 10%

(21) Ambient temperature :-10 to +50 , 30 to 80 % RH

(22) Storage ambient : -20 to +60 , 20 to 90 % RH

(23) Vibration endurance :Less than 29.42 m/s2, 10 to 55 Hz


30 minutes each on XYZ axes
(Do not subject to strong vibration for long periods of time.)

(24) Power consumption : Approx. 220mA

(25) External dimensions :44 (W) 44 (H) 49(D) mm


(Not including lens and protrusions)

(26) Mass : Approx. 130g

(27) Supplied equipment : Camera


Operating instructions

DWN
DSGN
CHKD Tokyo Japan
APPD
(28) Optional accessories : Lens (See operating instructions)
AC adaptor (AP-130)
DC input plug (R03-P3F)
Lens plug (E4-191J-100)
Tripod adaptor (TA-D20AB)
C mount adaptor (LA-D20AB)
Remote Y/C plug (HR10A-10P-12S(01))

(29) YC Output / Remote control Pin and signal assignments

Pin Signal
1 GND
2 +12V
3 GND(Y)
4 Y output
5 GND(TX)
6 TX output
7 RX input
8 GND(C)
9 C output
10 GND
11 +12V
12 GND(RX)

DWN
DSGN
CHKD Tokyo Japan
APPD
Notice:
These specifications are subject to change without prior notice due to product
improvement.
Confirm the most recent specifications at time of order.
Hitachi Kokusai Electric certifies this product complies with the standard
warranty conditions of Hitachi Kokusai Electric , and that quality control is
implemented to the extent required to comply with these conditions.

Warranty and service:


(1) The guarantee period is one year after the data purchase. However,
the defects due to erroneous use or intentional act are excluded.
(2) As the defect after expiration of the guarantee period, where product repair
is possible, repair will be performed at charge.
(3) The present Warranty pertains only to the camera unit. Secondary
malfunctions attributable to camera failure as well as expenses
incurred by disassembly and reassembly of the related system, are beyond
the scope of this Warranty.
(4) Compensation for loss of business, loss or damage to software, database and
other contingent losses are beyond the scope of this Warranty.
(5) Hitachi Kokusai Electric Inc. is not liable for the losses caused when the
equipment is used in a system, use for business trades, production process,
medical fields, crime prevention applications, etc.
(6) The parts used in the equipment have their respective lives. The lives of
such parts will be shortened under the environments of high
temperature or high humidity.
When the stable operation is required for a long time, It is recommended to
perform periodical maintenance and inspection every year or every two
years.

DWN
DSGN
CHKD Tokyo Japan
APPD
DWN
DSGN
CHKD Tokyo Japan
APPD
DATE CORRECTION AND REASONS BY CHKD APPD

DWN
DSGN
CHKD Tokyo Japan
APPD
DWN
DSGN
CHKD Tokyo Japan
APPD

You might also like